EV-100 Tiller Evolution AutopilotFeatures: A complete autopilot-in-a-box Evolution Ai for superior performance No calibration required Quick and easy installation Powerful tiller drive is compact and unobtrusive Used by the world's top single-handed sailors For tiller steered boats up to 13,200 lbs (6,000 kg) For 12V DC power systems Includes p70s Autopilot Controller Includes: EV-1 Sensor Core p70s Autopilot Control Head ACU-100 Actuator Control Unit Tiller Drive Tiller Pin (sold in packages of 5) Mounting Socket (sold in packages of 5) Evolution Cabling Kit EV Unit O-Ring Pack (set of 2) Wall Mounting Bracket The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Features: Precision monitoring of heading, pitch, roll, and yaw allowing the =autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays p70 Autopilot Control HeadThe p70 is a push-button operation controller designed primarily for sailboats.Features: LightHouse user interface is simple and quick to use Wide 160° viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) ACU-100 Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Evolution Cabling Kit 1 x SeaTalkng Power Cable (0.4m) 1 x SeaTalkng Backbone Cable (5m) 1 x SeaTalkng Spur Cable (0.4m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator Specifications: Steering Type: Tiller Box Dimensions: 12"H x 13"W x 31"L WT: 12.05 lbs UPC: 723193854204 Quick Guide (pdf)Brochure (pdf)

Read more less

Spare Vane Only f/WindTrak 15 Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 4"W x 16"L WT: 0.2 lbs UPC: 011698315109

Read more less

Four Channel Uplink Power Over Ethernet Switch - IEEE802.3af & 3at Compliant - 9-30VDC Input - 48VDC OutputThe new PoE4v2 from Iris Innovations is a four-channel plus uplink power over Ethernet switch that operates over a wide DC input voltage range of 930VDC making it perfect for powering IEEE802.3af/3at devices from battery sources such as boats and vehicles.The PoE4v2 outputs 48 VDC to your PoE device with a power budget of 60W in total and up to 30W per port, providing power to up to 4 devices at 15W each, 2 devices at 30W each, or 1 device at 30W, and further 2 devices at 15W.The unit features a passive uplink port to enable connections to other network switch equipment, routers, or modems.The PoE4v2 simplifies your installation as only a single network cable is required to connect and power your devices, reducing cost and adding convenience.Features: Compact and robust housing Wide input voltage range of 930VDC Perfect for boats and vehicles 60W power budget IEEE802.3af / 3at compliant Up to 30W per channel Plug and play operation - no configuration required 48VDC PoE output voltage to your devices Provides power to devices up to a 100-meter cable length Simplifies installations Specifications: Weight & Dimensions: 0.350 Kg / 115 mm x 32 mm x 95 mm Material: Aluminium, soft anodized PoE Ports / Standard: Ports 14 IEEE802.3af / 802.3at + 1 Uplink Port (non PoE) Total PoE Budget: 60W across 4 PoE Ports Maximum Cable Length: 100 Meters Approvals / Standards CE, UKCA, FCC, IC, REACH, RoHS, WEEE / EN IEC 62368:12020+A11:2020 EN60945:2002 Section 9 & 10 Input Voltage Range: 9 30 VDC Output Voltage: 48 VDC Power Consumption Idle: 0.8W / Max: 2.2W / PoE Max: 106W Environmental: IP30 - Install in a dry dust free environment. Do not expose to moisture. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Surface Mount Bracket for IRISx106 Series Cameras - White Powder Coat FinishThis surface-mount bracket facilitates installation directly onto a bulkhead and is often used when installing in engine rooms where it is not possible to recess-mount the device.Features:White powder coat finish Specifications: Type: Mounting Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 2.9 lbs

Read more less

4-In-1 Flush Vertical Surface Mount  - 316L Marine Grade Stainless Steel - Recess Mount DomeIris’ Sx76 series camera is the first of its kind designed to be installed into a bulkhead or vertical surface. Its waterproof stainless steel case is machined from marine-grade 316L stainless steel, which means it will not corrode in harsh saltwater environments, making it a great option as a backup or docking camera for boats. By mounting the camera on the sides of your boat, it can even be used when mooring alongside jetties or pontoons. During installation, the camera’s inner ball can be adjusted and locked into position by tightening the outer bezel to achieve the desired view. For analog or analog hi-def (such as TVI / CVI / AHD) systems, the S076 version features 1080P resolution. The camera also outputs a CVBS signal for legacy composite video systems. As well as marine applications, the camera's tough case, and small footprint make it a perfect visibility aid for recreational vehicles, fire and rescue trucks, and other applications requiring a robust and reliable high-definition camera.The camera is certified to EN60945, EN55032, EN55035, and EN60529 (IP66) and is ONVIF compliant. For marine applications, the camera is directly compatible with Raymarine LH2 and above, Simrad, Lowrance, and B & G. For Garmin systems, use them in conjunction with Iris CMAC systems.Features: 1.8mm standard lens (160-degree horizontal field of view) Corrosion-Proof 316L Marine Grade Stainless Steel Available in 4-in-1 (CVBS, TVI, CVI, AHD) & IP formats Analogue Hi-Def resolutions up to 1920x1080P resolution IP Version - Max 3MP Hi-Def Resolution Super wide angle 160-degree lens IP version supports PoE and 12VDC - ultra-low power Built-in infrared LED illumination (10m range) EN60945, EN55032, EN55035, EN50529 (IP66) , FCC, CE Shock & vibration proof Super rugged and easy to install Applications: Perfect for extreme environments Workboats & tug boats Fishing vessels Engine room monitoring Law enforcement & military Wind farm vessels SUVs, RVs, work vehicles, and trucks Luxury vessels Passenger ferries & cruise liners Specifications: Lens (millimeter): 1.8mm Horizontal Field of View: 160-degree HFOV Sensor (inch): Sensor 1/4” CMOS Sensor Resolution: CVBS: 960H / AHD, HD-TVI. HD-CVI: 1920 x 1080 Interface: OSD Menu via in-line Joystick in Cable Tail Video Processing: Analogue / Analogue HD Protocols/Video Format: 1VPP / 75Ω composite / AHD/TVI/CVI formats Onvif: NA Bitrate: NA Illumination: 6 x 850nm Infra-Red - 10-meter range Lens/Field of View: 1.8mm Standard (160-degree HFOV) Mirroring: Horizontal & vertical configuration via the OSD  Automatic Gain Control: Supported / multiple levels Compatibility: CVBS: All MFDs / Screens featuring composite video input AHD/TVI/CVI via interface or IRIS CMAC System Operating Temperature: -30 + 60-degrees C Connections: Video: Video - 75Ω BNC female / 2.1mm DC socket Material: Marine Grade 316L Stainless Steel (highly polished as a standard) Power: +12VDC (+10 +15VDC range) / 1W Nominal / 1.8W max. (LEDs on) Power Over Ethernet (PoE): NA Weight & Dimensions: 88mm ø x 22.25mm above and below the mounting surface Environmental: EN60529 / IP66 EMC: EN55032:2015/A11:2020 & EN55035:2017/A11:2020 EN60945:2002 Sections 9 & 10 / FCC Part 15 A & B RoHS: EN6300:2018 Brochure (pdf)

Read more less

Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Def Ethernet IP - 10x Digital Zoom - 4 in 1 Video FormatThe IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirement. In analog mode (default) the camera will connect directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders and you will achieve 1080P High Definition video in real-time compatible with MFDs that feature digital (HDMI / DVI) inputs.The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel available in high polish (standard). A surface mount bracket is also available for the camera (Part Number: BRK106), facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, and tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.Features: Marine Grade 316 Stainless Case The smallest PTZ dome available (86 mm) IP Huge compatibility Easy installation & low power Stylish high-polished finish Fast, responsive pan, tilt, and zoom operation Specifications: Lens (millimeter): F1.8 / F=4.9mm 49mm Image Sensor (inch): 1/4” Omnivision OV9712 Image Processing: H.264 Video Codec, Dual Stream 1-30fps adjustable Effective Pixels: 921,600 Resolution: 1080P/720P Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W) Illumination: NA IR Distance: 10m Day / Night: Auto / Day / Night S/N Ratio: >50dB  Optical Zoom: 10x Digital Zoom: 10x Wide Dynamic Range: Supported BLC: Supported 3D DNR: Supported Mirroring: Horizontal Flip / Vertical Flip AGC: 0-32 Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec Tilt Details: 0 90-degree / Speed 0.5300-degree sec Network: Ethernet RJ45 (10/100 Base-T) Protocol: TCP/UDP/HTTP/MULTICAST/UPnP/NTP/ RTSP/ONVIF-S 2.4 Power over Ethernet: Supported P2P: Supported Smart Phone: Android / iOS Compatibility: PC-Based Systems. For the latest MFD compatibility please contact IRIS Max Users: 32 Users Power: +12VDC / PoE IEEE802.3aF Power Consumption: 1A Max Operating Temperature: -35-degrees C + 60-degrees C Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm Ingress Protection: IP66 Weight: 1.1Kg Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing Brochure (pdf)

Read more less

595 Controller for NightRunner with Joystick Features: Miniature Thumb-Stick 2-Axis Joystick Complete control of the NightRunner Feature Set Intuitive Menu-Based Operation Supports Iris Extended Pelco-D protocol 8 x Illuminated Tactile Buttons for Easy Menu Navigation RS485 Serial Data Communications Supports up to 64 Night Runner Cameras on a single network Multiple Controllers Supported Water Resistant to IP66 Stylish Compact Design This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

B175HW Chirp Bronze Thru-Hull 20° Tilt 1kW - 10-Pin ConnectorHigh-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 20° Tilt.Features: Power: 1kW Function: Depth,Temperature Frequency: 150-250 kHz Mount Style: Thru-Hull, Flush, 20 Degree Tilt Housing Material: Bronze This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bronze 20 degrees tilt-element thru-hull w/temp for 16 degrees to 24 degrees hull deadrise (Beam angle:45 degrees @50kHz,12 degrees @200kHz) Specifications: Pins: 8 Mounting Style: Thru-Hull Imagining: Down Chirp: No Cable Length (Feet): 30' Temperature: Yes Speed Included: No Box Dimensions: 4"H x 8"W x 11"L WT: 4.9 lbs UPC: 010407320687 Owner's Manual (pdf)

Read more less

Mounting Pole KitPoles and hardware for mounting Vantage family stations or sensors.Kit includes two poles and mounting hardware. Poles can be used seperately or together to make a single, larger pole.Specifications One pole is 19.5" (0.50M) long Second pole is 21" (0.53M) long Outside diameter of both is 1.3125" (3cm) Total length with both poles is 37.5" (0.95M) long Specifications: Instrument Function: Wind Box Dimensions: 3"H x 3"W x 22"L WT: 3 lbs UPC: 011698003167 Owner's Manual (pdf)

Read more less

RS150 GPS SensorThe RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.Features: 72-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support A GNSS receiver with GLONASS compatibility Low power consumption: 30mA (1 LEN) SeaTalkng and NMEA2000 compatible (using a device net adapter cable) Designed for low profile surface mounting or optional pole mounting Specifications: Nominal supply voltage: 12V D.C. Powered by N2K bus Operating voltage range: 8 - 32V DC Power consumption: 30 mA max (NMEA LEN = 1) Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC) Relative humidity: max 93% Waterproof: IPx6/7 Supported connection protocols: SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor) Sensitivity: High sensitivity - acquisition down to -163dBm No. of channels: 72 Positioning System: GPS & GLONASS Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India) Differential acquisition: Automatic Position accuracy (95%): <15M Position accuracy with SDGPS (95%): <5M Speed accuracy (95%): <0.3kt Time to first fix from cold start: <2 minutes (< 45 seconds typical) Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start Geodetic Datum: WGS84 Specifications: Type: Antennas Box Dimensions: 4"H x 7"W x 9"L WT: 1.8 lbs UPC: 723193796917

Read more less

iSeaSense Wireless Speed Depth Temp PackDigital Yacht iSeaSense is a new range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity – allowing for maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.Top quality and highly accurate sensors are used for boat depth, speed, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.iSeaSense is easy to specify. Available as two main starter packs, everything is included for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.iSeaSense Pack 1 is a comprehensive boat depth, speed, and temperature pack.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.A full NMEA 2000 backbone cabling pack is included and the wireless interface for connectivity. There is a spare cable and connection point for additional NMEA 2000 devices such as a multi-function display or Digital Yacht’s range of instruments.iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.The data can also be used by 100’s popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.OperationYou can access the iSeaSense dashboard through its own web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument's data. So no complicated programming software or app is required.By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.iSeaSense Pack Features: Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays Interface Features: NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server. Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass Network diagnostics, settings, and calibration capability Data logging Self-powered from NMEA 2000 backbone Integrated wifi antenna typically footprints boats up to 20m Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus) Transducer Features: Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second 235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders Max depth 100m Supports up to 22-degree hull deadrise Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone Standard 2” thru hull size/diameter Includes Bluetooth interface for advanced calibration and set-up features if required Stainless steel and bronze skin fittings available as an option Brochure (pdf)

Read more less

Suncover for Axiom 9 when used with the Front Mounted kit A80500 Features: Rugged suncover protects your Axiom 9 from the elements Fits Axiom 9 models when fused with the front mounted kit A80500 Sleek design looks great on your boat NOT FOR USE WITH AXIOM PRO 9 Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 11"L WT: 0.55 lbs UPC: 723193818480

Read more less

AIT1500 NMEA2000 Class B AIS**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click to download form."An easy to install Class B AIS transponder with plug 'n play NMEA 2000 interface. Built in GPS antenna and ideal for use on smaller yachts and boats like RIBs and center consoles."The AIT1500N2K is a Class B AIS transponder with built in GPS antenna to make installation as easy as possible. The super sensitive design allows below deck mounting on GRP boats such as small yachts, RIBs and center consoles and cuts down on antenna clutter. It connects to your boat's electronics via a plug 'n play NMEA 2000 connection and power is also taken from the NMEA 2000 backbone. Simply connect a VHF antenna (or use our SPL2000 AIS-VHF antenna splitter) and you're equipped with Class B AIS. Once installed, your AIS compatible plotter will show an overlay of targets and you'll transmit your position every 30 seconds when underway to other AIS users. There's also a USB interface for PC/MAC connectivity which can be used for programming the transponder with your boat details. The AIT1500N2K features a waterproof and tough enclosure with 4 LED indicators to show the status of the transponder. Features:  Shares the same latest generation AIS technology as our AIT2000 and AIT3000 units  Plug and Play NMEA2000 interface (takes power from network) Compatible with all AIS ready chart plotters Internal GPS antenna for easy installation on fibreglass (GRP) hulled boats Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS) USB Interface for simple plug and play connection to a PC or Mac Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL2000) Supplied with programming software for PC/Mac and SmarterTrack Lite for Windows Easy to install black box solution NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: GPS Included: Yes Function: Receive/Transmit Display Included: No Antenna Included: No AIS Class: B Box Dimensions: 4"H x 7"W x 10"L WT: 1.2 lbs UPC: 081159830519

Read more less

XTH 9 DB 74 P Dual Beam Plastic Thru-HullFeatures: Dual Beam, 20/74 degrees 200/50kHz, temp included 6.7"L x 3"W x 1.4"D (below boat hull) Shaft: 1" diameter Cable Length: 30' WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pins: 7 Speed Included: No Mounting Style: Thru-Hull Imagining: Standard Chirp: No Cable Length (Feet): 30' Temperature: Yes Box Dimensions: 7"H x 8"W x 10"L WT: 3.65 lbs UPC: 082324506826 Owner's Manual (pdf)

Read more less

B952 Class B AIS Transceiver - 5W SOTDMA - WiFi & Bluetooth**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The B952 is a high-power (5W SOTDMA) Class B AIS transceiver, offering unmatched performance and ultra-low power consumption. Small and lightweight, it combines integrated Wi-Fi & Bluetooth capabilities for seamless wireless connectivity and AIS data streaming. It is compatible with any mobile device, PC, or wearable – ensuring everyone on board gets the most from your transceiver and related onboard equipment every day.The B952 transceiver works seamlessly with em-trak's CONNECT-AIS app to make programming, configuration, and device monitoring easier than ever before. The class-leading device is engineered to deliver real-time data processing, with increased range and transmission priority and its flexible connectivity means it can be used by up to nine different devices simultaneously.em-trak's next-gen technology means the B952 is delivered within a compact, easy-to-install, rugged package designed and manufactured to operate reliably without maintenance in the harshest marine environments.Features: Certified AIS Class B – 5W SOTDMA Integrated WiFi & Bluetooth Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smart phone, tablet or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 385kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications:Supply voltage: 12V or 24V DCSupply voltage range: 9.6V - 31.2V DCAverage current (at 12V): 170mAAverage current (at 12V) (wireless off): 135mAPeak current: 2.5AAverage power consumption (at 12V): 2.0WAverage power consumption (at 12V) (wireless off): 1.6WGalvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna portConnectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces:NMEA 0183: 2 x bi-directional portsNMEA 2000: NMEA 2000 Ed 3.101, LEN=1USB: PC virtual com port for NMEA 0183 dataWiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode)Bluetooth: BT Classic 4.0, 7 concurrent connectionsStandards Compliance:AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008Environmental standards: IEC 60945 Ed. 4Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0NMEA 2000: NMEA 2000 Ed 3.101GNSS performance standards: IEC 61108-1 Ed 2.0,  IEC 61108-02 Ed 1.0GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 7"L WT: 2 lbs UPC: 672975210557 Quick Guide (pdf)Brochure (pdf)

Read more less

NavControl TFT Controller for AcquaLink® & OceanLink® - BlackFeatures: Color: Black NavControl TFT Controller Specifically for AcquaLink® and OceanLink® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

NMEA 2000 field installable connector - maleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 0.09 lbs UPC: 753759078362

Read more less

XI-9-19 Dual Beam Ice Transducer 455-240kHzFeatures: Operating Frequency: 240 kHz to 455 kHz Beamwidth: 9°, 19° Compatibility: ICE 35 ICE 45 ICE 55 WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

B922 Class B AIS Transceiver with WiFi & Bluetooth Wireless Connectivity - 2W CSTDMA**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The B922 is a 2W CSTDMA Class B AIS transceiver, offering unmatched performance and ultra-low power consumption through em-trak's advanced technology. Small and lightweight, it combines integrated WiFi & Bluetooth capabilities for seamless wireless connectivity and AIS data streaming, compatible with any mobile device or PC.Its flexible connectivity means it can be used by up to nine different devices simultaneously, ensuring everyone on board gets the most from your transceiver and related onboard equipment every day. The B922 transceiver also works seamlessly with em-trak's CONNECT-AIS app to make programming, configuration, and device monitoring easier than ever before.Like all products in the class-leading B900 range, the B922 is engineered to deliver real-time data processing, even at the range limit. It is easy to install with em-trak's unique FLEXI-FIT 'no screw' bracket system, and will operate without maintenance for years to come.Features: Certified AIS Class B – 2W CSTDMA Integrated WiFi and Bluetooth Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 385kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 170mA Average current (at 12V) (wireless off): 135mA Peak current: 2A Average power consumption (at 12V): 2.0 W Average power consumption (at 12V) (wireless off): 1.6W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 8"L WT: 1.65 lbs UPC: 672975210519 Quick Guide (pdf)Brochure (pdf)

Read more less

Element™ 9 HV Combo with Nav+ & Canada ChartKnowledge is power—and the Element™ CHIRP sonar/GPS series from Raymarine gives you the power to make smarter decisions on the water. Built for anglers that want to be one step ahead of the game, Element delivers the sharpest view of the underwater world with HyperVision™ 1.2 megahertz super high-resolution sonar technology. HyperVision technology takes DownVision, SideVision, and Raymarine RealVison 3D sonar to the next level of precision imaging and fish identification, letting you see structures, vegetation, and fish with photo-like clarity.  And the power of Element doesn’t stop there—an onboard quad-core processor delivers instantaneous chart redraw, fast response, and smooth RealVision 3D imaging. To keep you on target, Element features simple keypad controls and an angler-centric user interface so you can focus on the fish—not the helm.  An oversized waypoint key puts you on your favorite spots, and Element’s RealBathy™ personal depth map generator lets you make your own high definition bathymetric maps on the fly.Features: High-visibility sunlight viewable 9” display Superior HyperVision CHIRP sonar technology achieves 3x the clarity of conventional side and down imaging sonars  Built-in RealVision 3D sonar gives you the power to accurately identify the location of ledges, channel beds, and other contour changes Fast quad-core processor allows instantaneous chart re-draw and continuous 3D rending while running a simple, easy-to-learn user interface. 1.2 megahertz HyperVision sonar provides outstanding resolution up to 100’ while 350kHz Down and SideVision delivers photo-like imaging up to 600’ Take 3D sonar to the next level with HyperVision mode for unprecedented resolution and positional awareness Dedicated keypad controls for simple operation, plus an oversized waypoint key for marking favorite spots Raymarine RealBathy™ personal sonar mapping and Navionics SonarCharts Live support  User-programmable keys allow quick access to most-used configurations Support for Raymarine LightHouse NC2 with Fishing Hot Spots, Navionics, C-MAP and other regional charting options NMEA2000 networking for VHF, engine, tanks, and heading sensor integration Specifications: Transducer Included: No Cartography Brand: Navionics/C-Map/CMOR Screen Size: 9" Touchscreen: No Box Dimensions: 6"H x 12"W x 16"L WT: 7.05 lbs UPC: 723193831588 Owner's Manual (pdf)

Read more less

Deep-Pipe Level Sender - 300mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 300 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 0 to 180 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 17"L WT: 1.2 lbs UPC: 7640178725430

Read more less

Deep-Pipe Level Sender - 500mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 500 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 0 to 180 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 30"L WT: 1.95 lbs UPC: 7640178725638

Read more less

SAS-300 Class B AIS System - Display Only for Use with Existing AISThe SAS-300 is a complete Class B AIS system designed for simple to use management, control and display of all AIS targets within VHF range. AIS data can be received from all types of Class B or Class A transponders, and can be displayed either on a "radar" type display, with chart overlay or without. The vivid graphics and the simple menu structure on the 6.5 inch, high resolution displays make the unit easy to use. The data is easy to access and the information easy to analyze, enabling the user to quickly move from screen to screen and gain access to the information specifically required.Features: Complete information from all AIS vessels Radar Style Display Heads Up, North Up, and True Motion Chart Orientations Plot targets on detailed C-Map Charts Bright 6.5" TFT LCD Display 5 track memories totaling 50,000 pts Programmable CPA and TCPA alarms Display vessels by selectable color and icon Filter vessels by type of transmission Built in Class B AIS Transceiver Transceiver easily programmed via keypad Transmitter easily silenced via keypad Tracks the movement of up to 5 vessels with 50,000 point track history and optional live details on individual vessels Monitors position, speed and heading of vessels on a background chart or on detailed C-Map cartography (optional) Allows variable parameters to be set for CPA and TCPA alarms Listing of all vessels with name, MMSI, range and bearing, with full details on each vessel, and instant GOTO function Ability to display different types of vessels by color, and different types of transmission by icon shapes Displays the Following Information: Class A vessels Class B vessels Base Stations Aids to Navigation AIS SARTs Search & Rescue *Display ONLYThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Display Included: Yes Box Dimensions: 9"H x 9"W x 13"L WT: 5.75 lbs UPC: 010407420059 Quick Guide (pdf)

Read more less

Deep-Pipe Level Sender - 160mm - 240 to 33 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 160 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 240 to 33 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 2"H x 4"W x 9"L WT: 1 lbs UPC: 7640178725799

Read more less

Piranhamax 4 DISharper image. Sharper teeth. With modern styling and a larger 4.3" color LCD, the PiranhaMAX™ 4 DI will give you a fresh perspective on what's below your boat. Thanks to a redesigned, even easier-to-use interface, the power of Down Imaging®, Fish ID+™, fish alarms, depth alarms and zoom has never been simpler. Feature for feature, it packs a technological chomp that no fish finder in its class can match. Features: Down Imaging: Get a clear view of what's happening below your boat with Down Imaging. As you patrol the water, you'll watch timber, brush, bridge pilings, rocks and any other structure pop with great detail. Tilt and Swivel Mount: Quickly adjust your viewing area angle. 1-Year Limited Warranty WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Included Transducer: XNT-9-DI-T Screen Size: 4.3" Transducer Type: Transom Mount Transducer Included: Yes Box Dimensions: 4"H x 8"W x 12"L WT: 2.6 lbs UPC: 082324048739 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

X-Port Tactician™ CompassFeatures: Course Minder Movable Bezel with Heading Memory Indicator Remembers the Way 3″ (76 mm) CombiDial with Tactical Quadrants to show Wind Shifts and Headers. Low Mounted Height Surface Mount Easily Installed Extended Temperature Operating Range with Composite Construction & Diaphragm Exclusive DirectiveForce Magnets Hardened Steel Pivot and Sapphire Jewel Movement No Wiring or Power Needed Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1 lb. (454g)Notes: Kayaker Tie Down mount available. Part number K-TD.2 Specifications: Mounting Style: Surface Lubber Lines: Yes Read: Both Backlight: No Box Dimensions: 6"H x 7"W x 8"L WT: 0.9 lbs UPC: 010342140654 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

8.5" Color LCD Radar with 4kW Output - 1/16-36nm Range - 25" RadomeSI-TEX's T-941 Radars feature sophisticated Hyper-Digital Processing™ (HDP) Technology for real-time presentation and superior target discrimination.Features: It virtually eliminates unwanted noise to provide a clearer detailed image of targets and enhances the detection of smaller targets Radome: 4kW, 36NM, 25" Display Brilliant 8.4" color LCD daylight viewable display 480 x 640-pixel resolution and anti-reflective glare coating for outstanding viewing True-color radar feature displays echoes in different colors depending on signal strength The real-time presentation offers smooth movement as bearing changes The T-941 has two-speed antenna rotation for tracking of quick-moving, close-in targets: 48 RPM 24 RPM (Requires 24 Volt DC input) Selectable range scales from 1/16 NM Warning Zone alerts you to "incoming" and "departing" targets breaking your preset guard zone Automatic hands-off tuning maintains maximum sensitivity at all times with manual override for the experienced use RGB output for connecting (2) optional external monitors Easy access to all system functions with simply arranged keypad, programmable function keys, comprehensive menus and dedicated rotary knobs for instant control of Gain and STC Built-in flush mounting system makes installation easy All this advanced radar technology is housed in a sleek, waterproof (IPX5 rating) case design that can be mounted almost anywhere Dual Range Radar function lets you view split-screen displays of both long and short-range targets simultaneouslyMonitor a nearby buoy and a far off island at the same time True Trail function clearly identifies moving targets from stationary targets The display shows the exact movement of other vessels like drawing tails, while land and buoys are shown as stationary objects even while your vessel is moving Accepts CCD camera input, to display split-screen Radar and CameraAllows you to monitor important areas of your vessel while shill keeping watch of your surroundings Optional ATA (Automatic Tracking Aid) allows you to tracks up to 50 user designated targets Designate the target and the radar will automatically provide the target distance, speed, bearing, course, and closest point of approach on all user targets selected. Optional AIS interface displays information on up to (100) AIS targets including the vessel's MMSI number, name, course, and speed of each vessel with an AIS transmitterThis information is sent continuously and is useful in navigating, traffic monitoring, and collision prevention Specifications:Antenna Unit: Scanner 25" Radome Peak Power Output 4kW Output Frequency 9410 + 30MHz Beam Width: Horizontal 3.9° Vertical 25° Rotation 24 or 48 rpm (48 rpm; 24V DC or more Pulse Width .08, 0.15, 0.3, 0.5, 1 use IF Frequency 60 MHz Range Accuracy Better than 8m Min. Detecting Distance: Within 25m Display Unit: Display Size/Type 8.4" TFT Color LCD (480 x 640 pixels) Off Centering Max 66% Display Modes Heads up, North up*, Course up* WPT up**, True motion* Indication System PPI, PPI/PPI, PPI/NAV Range Scales NM 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4, 6, 7, 12, 16, 24, 32, 48 (T -- PNEW to 24,T -- 941 to 32, T -- 940 to 48) Range Rings NM 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1/1.5, 2, 3, 4, 6, 8 12 Bearing Accuracy Better than + 1° Video Level 8 colors Distant Unit (VRM unit) NM, SM, KM Alarms Entry or Breakaway (In and Out) Other Functions Interference rejection, Target expansion, VRM, EBL, Parallel index, Course position (Lat/Lon), Bearing (true/relative), Trail*, RGB Monitor output, Slave display monitor input/output, External buzzer. Accepts CCD camera input AIS Interface Option (100 targets) ATA Option (Auto/Manual, 50 targets) Input Data Format BEC, BWC, BWR, DPT, DBT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWD, MWV, RMA, RMB, RMC, VHW, VTG, XTE Output Data Format TTM, TLL Power Requirements 10.8 - 31.2 Volt DC Power Consumption 55 Watt Water Protection Display: IPX 5 Antenna CFR 46 IPX What's In The Box? Display Unit MRD-103 with hardcover Connecting Cable 242J158055A -10 M with 2 connectors DC Power Cable CW265-2M 2m CCD Camera Cable CW-405-0.3M Operation manual, Quick reference Fuse (8A) Specifications: Array Size (Inches): 25" Power - Output: 4kW Range - Max (Miles): 36nm Box Dimensions: 9"H x 11"W x 14"L WT: 46.25 lbs

Read more less

Explorer CompassFeatures: 2 3/4″ (70 mm) Easy to Read Direct Reading Dial Compact Low-Profile Design Quick Push-Button Removal of Compass Module for Storage and Security Choice of Colors Internal Green Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield High Temperature Composite Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1lb (454g)Notes:All compasses come standard with 12v lighting. 24v lighting option is available. Some custom built OEM models may have different lighting.  Specifications: Read: Front Mounting Style: Surface Backlight: Yes Lubber Lines: Yes Box Dimensions: 4"H x 5"W x 5"L WT: 0.8 lbs UPC: 010342160454 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

HELIX ICE Conversion Kit - MEGA 360The MEGA 360 ICE Adapter Kit includes everything you need to convert your HELIX 8, 9, or 10 G3N/G4N with MEGA Imaging for ICE fishing. See structure, the bottom and fish up to 125’ in every direction around your hole, powered by the unmatched detail of MEGA Imaging®. And take advantage of crystal-clear Dual Spectrum CHIRP Sonar with 3/4" target separation and CHIRP Interference Rejection. Additional features designed specifically for the ICE angler include a premium shuttle and 20Ah lithium battery. Features: MEGA 360 Imaging: Eliminate the guesswork and quickly find structure and fish without drilling as many holes, track schools of fish as they move, and know which direction the fish are headed. Premium Shuttle: It has it all. Master power switch, quick-connect SAE power cables, large handle, multiple ¼"-20 mounting options for accessories, two rod holders, cable and transducer management, and a battery cover. Compatible with: HELIX 8, 9, and 10 G3N/G4N with MEGA Imaging+ What’s Included: MEGA 360 transducer, MEGA 360 ICE Adapter Kit, Heading Sensor GPS Puck, Dual Spectrum CHIRP ICE transducer, 20Ah lithium battery with 2 USB ports and battery life indicator, charger, ICE shuttle, hardware, and quick-connect SAE power cables 2-Year Limited Warranty Quick Guide (pdf)

Read more less

DepthTrax In-Dash Digital Depth & Temp Gauge - Transom MountThe DepthTrax 2BX includes all the advanced sonar, depth alarm, and keel offset capabilities of the DepthTrax 2B, but also integrates dual temperature displays and an AIRMAR®, ultra-sensitive, high-performance transom mount transducer.  With a simple press of a button on the DepthTrax 2BX display produces instant access to water or air temperature readings via integrated sensors in both the head unit and the transducer.The DepthTrax 2BX delivers a combination of performance and affordability unrivaled in any other depth sounder.Features: Algorithmic programming significantly reduces false readings and produces unmatched precision EasyTouch programming allows one-touch access to the user settings User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements Selectable Imperial or Metric readout Dual Upper and Lower depth alarms can be set throughout the full depth range 3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting Displays air & water temperature in °F or °C Automatic memory retention of all user settings Removable face system - includes White & Black faceplates and White/Black trim rings No glare, polarized LCD icon display with storage sun cover  SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing Technical Specifications: Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm) Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm) Gauge Cut-out Size - 2" Operating Temperature - 0 to 160° F (-18 to 71°C) Depth Range - 2.5' to 600' (.7 to 180 M) Transducer Type - Transom Mount Transducer Frequency - 200kHz Transducer Beam Angle - 14° Transducer Cable Length - 30' (9 M) Power Requirement - 12 - 14 VDC In the Box: Gauge Bezel/Faceplate - Black and White Display cover Mounting hardware Transducer - transom mount w/30' cable Instruction manual  *Sold as an Individual Specifications: Box Set: No Gauge Size: 2" Gauge Type: Depth Sounder Voltage - Input Range (Volts): 12 - 14 Box Dimensions: 4"H x 7"W x 7"L WT: 2.4 lbs UPC: 818800103919 Owner's Manual (pdf)

Read more less

52mm (2-1/16") IBM Kit - 24VWhether on the water, in an RV, riding the trail, or operating a piece of industrial equipment, a dead battery will ruin anyone's day. Veratron's VL Flex Intelligent Battery Monitor Kit contains everything needed to deliver real-time battery health and status to the smallest dashboard. It combines two pioneering products, Veratron's award-winning Intelligent Battery Sensor and its revolutionary VL Flex Instrument.  All additional components needed for a fast and easy installation are included.The innovative Intelligent Battery Sensor measures and reports voltage, current, and temperature. It also originates additional critical data such as the state of charge and overall battery health. The device works for either a single 12V lead, gel, or AGM battery or a combination of two 12V batteries to a 24V unit.Features: Flex display kit for Battery monitoring 1x Resistive input for Fuel or Fresh Water level Dedicated harness with pushbutton for screen scrolling In the Box: VL Flex 52 IBM Gauge 24V  Intelligent Battery Sensor (IBS) 24V Battery Pole Adapter M8 Wire Harness 24V IBS 6m 52mm Mounting Spinlock Push Button for Wire Harness Safety instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Battery Condition Voltage - Input Range (Volts): 24v Box Dimensions: 4"H x 8"W x 12"L WT: 2 lbs UPC: 7640178729735 Owner's Manual (pdf)Brochure (pdf)

Read more less

Explorer CompassFeatures: 2 3/4″ (70 mm) Easy to Read Direct Reading Dial Viewing is adjustable to 30 / Heel angle to 25 Easily Installed w/4 mounting screws provided, Fits 3″ (762 mm) Mounting Hole. Built-in Compensators to Easily Adjust for Deviation 12v Night Illumination 100% Repairable Exclusive 5-Year Ritchie Warranty Notes:Comes standard with 12v lighting. 24v lighting option is available.Some custom built OEM models may have different lighting. Specifications: Read: Front Mounting Style: Bulkhead Lubber Lines: Yes Backlight: Yes Box Dimensions: 5"H x 6"W x 6"L WT: 0.8 lbs UPC: 010342161192 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SP300 SonarPhone T-Box Portable Installation Pack12V Portable Battery Pack to Take Your SonarPhone Anywhere!The T-Box (SP300) options come in a portable system with a carry case to hold the battery and transducer cable. Your transducer is easily suction cup mounted on your boat. Easy to install on any boat, the skimmer style transdcuer and suction cup bracket can be used safely at speeds of 15 miles per hour. A safety cord is also supplied.The SP300 comes with a 12V, 4.5 amp hour rechargeable battery and you also get a fully automatic 1 amp digital charger for rapid re-charging and with no worries of over-charging the battery. Your SP300 will run for nearly 20 hours on a single charge!The SP300 T-Box has a powerful, dual-beam 20/40°, 200 kHz transducer for reaching depths of 240'.The SonarPhone SP300 creates its own WiFi hotspot so it can be used anywhere in the world and does not require cell phone coverage. You can share your signal with as many people as you wish, the software app is downloaded for free from the App Store or Google Play and works with both Android and IOS systems.Features: Compatibility: iOS 4.3 (iPhone, iPad) and Android 2.0 Free App download Automatic Ranging Water Temperature and Depth Indicator Audible Alarms for Fish, Shallow and Low Battery Fish Icon Zoom Bottom Track Noise Rejection Surface Clarity Battery Indicator 1-year Vexilar Warranty Specifications: Depth Range Max: 240' (73M) Portable carry case with rechargeable 12V battery enclosed 200/83 kHz Dual Beam with 20 and 40° cone options High Speed skimmer-style transducer with 20' cable and suction cup mounting system Requires 12V power supply 1 Amp, fully automatic battery charger Wi-Fi signal transmit range of 300' Run time over 15-hours of continuous use per charge 800W Peak to Peak Touchscreem with split-screen zoom and bottom track control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Transducer Type: Portable Transducer Included: Yes Box Dimensions: 6"H x 9"W x 12"L WT: 7.2 lbs UPC: 052762130150 Brochure (pdf)

Read more less

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

Read more less

ICE Adapter Kit - MEGA LiveThe MEGA Live ICE Adapter includes all the components needed to convert a MEGA Live Imaging transducer for use while ICE fishing. Features: Compatible with: MEGA Live Imaging Multi-piece pole breaks down into three sections for varying ice depths and a more compact footprint for storage. What’s Included: Shaft, 10" base, handle, adjustable depth collar, and custom power and ethernet cables 1-Year Limited Warranty

Read more less

ICE 45 Ice Fishing FlasherHumminbird's ICE 45 ice fishing flasher uses a 3-color fiber-optic flasher with a center dial LCD display engineered for peak performance in temperatures as cold as -20xF. The LCD includes digital depth and allows the flasher to automatically adjust the depth scale, eliminating the guesswork and estimation of depth scale overlays. Rely on Humminbird ice flashers to find your spots and keep your cooler full.At the heart of the Humminbird ICE 45 Ice Flasher is a Dual Beam 9 Degree (240 kHz) 19 Degree (455 kHz) transducer allowing for a greater overall cone of view. This flasher runs at four depth scales in manual mode: 20 ft., 40 ft., 80 ft., and 200 ft., and seven depth scales in automatic mode: 20 ft., 40 ft., 60 ft., 80 ft. 100 ft., 120 ft. and 200 ft.The ICE 45 includes a 4 button control pad with zoom, gain, noise, and beam selections for easy fine-tuning. An LCD battery voltage indicator lets you know the flasher's power condition. This unit includes a rechargeable 7 amp hour 12 volt battery and charger.Features: LCD and 3-color fiber-optic flasher display Overlay depth scale delivers excellent viewing in sunlight 1800 watts peak-to-peak power 10-step interference rejection 4 depth scales (manual mode): 20', 40', 80', 200' 7 depth scales (auto mode): 20', 40', 60', 80', 100', 120', 200' Shuttle mount with built-in gimbal bracket 7AH battery with charger 2-year manufacturers warranty WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Open Water Adapter Kit - MEGA LiveThe adapter kit includes all accessories needed to convert the MEGA Live Imaging™ transducer for use on a boat. Features: What's Included: Shaft clamp, and all required cables (transducer and shaft sold separately). Compatible with: MEGA Live Imaging Transducer, Minn Kota® Ultrex™, and Minn Kota ® Fortrex®

Read more less

ICE 55 Ice Fishing FlasherHumminbird's ICE 55 Ice Flasher from Humminbird carries revolutionary features built and designed for the diehard ice fisherman. The ICE 55 Ice Flasher features a fiber-optic flasher display and a backlit LCD for exceptional performance in any level of light, making this flasher easy to use on those blinding, sunny winter days. The 6-color display has an overlay depth scale for easy interpretation. The LCD shows a depth scale and a large number of readouts for exact depth marks.At the heart of the Humminbird ICE 55 Ice Flasher is a Dual Beam 9 Degree (240 kHz) 19 Degree (455 kHz) transducer allowing for a greater overall cone of view. This flasher runs at four depth scales in manual mode: 20 ft., 40 ft., 80 ft., and 200 ft., and seven depth scales in automatic mode: 20 ft., 40 ft., 60 ft., 80 ft. 100 ft., 120 ft., and 200 ft.The ICE 55 includes a 6-button control pad with zoom, gain, noise, beam, target cursor, and color selections for easy fine-tuning. An LCD battery voltage indicator lets you know the flasher's power condition. This unit includes a rechargeable 9 amp hour 12-volt battery and charger.Features: LCD and 6-color fiber-optic flasher display Overlay depth scale delivers excellent viewing in sunlight 2400 watts peak-to-peak power 10-step interference rejection 4 depth scales (manual mode): 20', 40', 80', 200' 7 depth scales (auto mode): 20', 40', 60', 80', 100', 120', 200' 6 button control pad Color palatte setting allow unit to display as Vexilar, Marcum and Humminbird-6 color Dual Beam 9/19° Transducer LCD Battery voltage indicator Shuttle mount with built-in gimbal bracket 7AH battery with charger Soft Side Carrying Case 2-year manufacturers warranty WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Protective Cover for Vision AIS DisplaysProtective cover designed to fit firmly over the Vision AIS display. It will protect your Vision AIS against harsh sunlight, sea spray, and even light knocks. It is a form-fitting cover molded in a way that will hold its shape, unlike some other display protectors. The pull tab is designed as a loop that can also be used as a tether point if you require a lanyard to ensure the cover never gets lost.

Read more less

15M Power Cable for Cyclone RadarPower cable specifically made for Raymarine's Cyclone Radar.15M

Read more less

15M Data Cable for Cyclone RadarData cable specifically made for Raymarine's Cyclone Radar.15M

Read more less

ICE Adapter Kit for MEGA LiveThe MEGA Live ICE Adapter includes all the components needed to convert a MEGA Live Imaging transducer for use while ICE fishing. Features: Compatible with: MEGA Live Imaging What’s Included: Shaft, 10" base, handle, adjustable depth collar, and custom power and ethernet cables. 1-Year Limited Warranty Quick Guide (pdf)

Read more less

ICE Adapter Kit - MEGA 360The MEGA 360 ICE Adapter includes all the components needed to convert a MEGA 360 Imaging transducer for use while ICE fishing. Features: Compatible with: MEGA 360 Imaging – Ultrex, MEGA 360 Imaging – Fortrex, MEGA 360 Imaging – Universal, MEGA 360 Imaging – No Mount What’s Included: 10" base, handle, adjustable depth collar, Heading Sensor GPS Puck, and custom power, transducer, and y cables 1-Year Limited Warranty Quick Guide (pdf)

Read more less

Euro Black 4" Speedometer (30 Knot) (Pitot)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism.∗Pitot tube sold separately.4" Gauge - Hole size: 3.4" (86.36 mm)Features: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N SE9659*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: Euro Black Gauge Type: Speedometer Gauge Size: 4" Box Set: No Box Dimensions: 4"H x 4"W x 4"L WT: 1.1 lbs UPC: 759266328099

Read more less

NMEA 2000 Drop Cable - 2MThis 2 meter NMEA 2000 drop cable offers connection between a NMEA 2000 device and T-connector. The couplers connect to the corresponding T-connectors, creating a simplified installation.Features: Includes (1) NMEA 2000 drop cable Cable length: 2 meter (3.25 ft) 1-Year Limited Warranty

Read more less

Bracket Assembly Mounting Set - Viewline GaugesFor omitting the fastening nut.  This is recommended if the installation location is subject to vibratory loads.  Screw the stud bolts into the provided drill holes in the enclosureFeatures:Designed for 52mm, 85mm and 110mm GaugesFor Panel Installation *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Sealing Kit for Water Capacitive SensorSealing Kit for Fresh Water Level Sensor.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less