Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.nAnchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes: Anchor Mount/Rope Guide Assembly  Anchor Rope Reel Assemblyn Rear Pulley, Rear Pulley Axeln Other Features:n nAnchor deploys and lifts smoothly and securely.   Easy installation with detailed instructions. n Multiple mounting solutionsn Anchor stows conveniently in anchor mount housingn *Anchor, rope, and mounting hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deckboat 40-G3 Electric Anchor Winch with AutoDeployThe TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch with AutoDeploy allows you to automatically raise and lower your anchor with easy-to-use buttons. AutoDeploy works by simply pressing and releasing the down button.  When the anchor reaches the bottom, the winch will shut-off, holding the boat in place.  It has a maximum anchor capacity of 40 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands. *Anchor not includedTechnical Specifications: Boat Size - Up to 26' Anchor Capacity - 40 lb Anchor Deployment - Power Down or AutoDeploy Down Rope Speed Down - 70 FPM Rope Speed Up - 65 FPM Power - 12 V Dimensions (L x W x H) - 19.5" x 9.75" x 5.75"  In the Box: Winch w/integrated anchor roller 100' of 3/16" pre-wound double braid anchor rope Sealed membrane UP/DOWN/AutoDeploy switch Marine-grade battery wire - 17' Assembly hardware and  Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Vertical/Horizontal: Horizontal Chain - Diameter (Inches): N/A Rope Diameter (Inches): 3/16" Freefall: No Box Dimensions: 7"H x 10"W x 16"L WT: 13.95 lbs UPC: 666996102199 Owner's Manual (pdf)

Read more less

Foot Switch - Up - WhiteAnchor lifting switch w/safety cover to prevent accidental push-button operation.

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.6 lbs Brochure (pdf)

Read more less

UltraGard™ PVC Dock Bumper - 35" - BlackThis bumper is manufactured from the same quality material as our Dolphin Boat Fenders and offers the ultimate in cushioning of impacts from your boat. Molded-in ribs on the interior of the UltraGard ensure it is very soft, but durable and will not collapse. The back has a slight radius allowing for easy mounting on pilings as well. Specifications: Color: Black Box Dimensions: 3"H x 6"W x 36"L WT: 3.6 lbs UPC: 776113100868

Read more less

Double Braided Nylon Dock Line - 5/8" x 35' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 35' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 4"H x 10"W x 14"L WT: 4.1 lbs UPC: 035514303347

Read more less

5lb Mushroom AnchorThe YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base.Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys.Features: 5 lb. inverted mushroom-shaped anchor Cast iron and vinyl coated in black 1-year warranty Specifications: Color: Black Construction: Carbon Fiber Weight (lbs): 5 Box Dimensions: 6"H x 6"W x 6"L WT: 5.15 lbs UPC: 853628005816

Read more less

Rail Mount Stainless Steel Fender Holder Dual - 7.5"The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Double Braided Nylon Dock Line - 5/8" x 50' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 50' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 6"H x 6"W x 6"L WT: 7 lbs UPC: 035514303354

Read more less

Pro-Series Generation 3 Seals & Screws Kit Replacement seals and screws kit for Pro-Series Generation 3 windlasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual

Read more less

Replacement Delrin Roller - 3"When replacement of your bow roller is needed.  Original parts work the best and last the longest.Technical Specifications: Diameter - 3" Width - 3-3/8" Hole Diameter (I.D.) - 1/2" *Sold as an Individual

Read more less

EZ Board Boarding Handle - 36"Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle.Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance. Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove. Do not force the EZ Board handle to install or remove. NOTE:Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Quick Guide (pdf)Brochure (pdf)

Read more less

Piling Bumper - One End Capped - 6' - White Premium marine grade PVC construction Molded-in UV Inhibitors & Fungicides Integral strengthening ribs Curved profile to make piling mounts easier Mounts easily on curved OR flat surfaces Available in 6 Ft. Lengths WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 4"H x 6"W x 72"L WT: 10 lbs UPC: 776113102008

Read more less

Guardian G-85 Anchor - 42lbGuardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy.  These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated.  The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms.  The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.*Made in the U.S.A.Features: Fortress high-tech aluminum alloy Rust-proof and non-magnetic materials Easily assembles and disassembles for convenient storage No failing welded pieces Easy to manage weight Replaceable parts Technical Specifications: Size of Boat - 54' to 62' (16 to 19 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 4,625lbs (2,098kg) Shank Length - 48" (1,219mm) Fluke Length - 28" (711mm) Stock Length - 39" (991mm) Weight - 42lbs (19kg) *Sold as an Individual Specifications: Weight (lbs): 42 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 5"H x 10"W x 50"L WT: 42 lbs UPC: 647124340850 Quick Guide (pdf)Brochure (pdf)

Read more less

Mooring WhipsThe practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip.HowellThe economical way to fasten your boat, these fiberglass WHIPS are exceptionally strong, attractive and will not obstruct your waterfront view. Acting as a spring, each whip is comprised of solid, fiberglass rod. Durable cast aluminum bases with a tough 3/8" thick mounting footprint and molded-in cleat, ring and thumb screw for securing the whip into position. Unaffected by UV, each whip also includes a unique tip with functional roller to allow easier access to your boat. Each WHIP is constructed to the most rigid specifications and is of the highest quality materials.Available in 8' and 12' sizes for craft up to 23ft. and up to 4000 lbs.Product Specifications: Part No.: 3100-F Description: Mooring Whip, 8', Lines & Hdw, 2000 lbs cap. Weight: 13 lbs. Packaging Dimensions: 95 x 8.5 x 5.25 inches Cleats not included  Specifications: Length: 8' Box Dimensions: 6"H x 9"W x 95"L WT: 14 lbs UPC: 776113310007 Owner's Manual (pdf)

Read more less

Dockside Bumper The ultimate in heavy impact protection Rugged, air filled Heavy-wall molded PVC & integral inflation valve Angled ends to deflect craft Use Straight bumpers in pairs to form inside corners Excellent gunnel protection Industrial Strength with the Standard Quality and Performance of Dolphin FendersWARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 8"H x 9"W x 24"L WT: 7 lbs UPC: 776113106211

Read more less

Mooring WhipsThe practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip.HowellThe economical way to fasten your boat, these fiberglass WHIPS are exceptionally strong, attractive and will not obstruct your waterfront view. Acting as a spring, each whip is comprised of solid, fiberglass rod. Durable cast aluminum bases with a tough 3/8" thick mounting footprint and molded-in cleat, ring and thumb screw for securing the whip into position. Unaffected by UV, each whip also includes a unique tip with functional roller to allow easier access to your boat. Each WHIP is constructed to the most rigid specifications and is of the highest quality materials.Available in 8' and 12' sizes for craft up to 23ft. and up to 4000 lbs.Product Specifications: Part No.: 3120-F Description: Mooring Whip, 12', Lines & Hdw, 4000 lbs cap. Weight: 20 lbs. Packaging Dimensions: 95 x 8.5 x 5.25 inches Cleats not included Specifications: Length: 12' Box Dimensions: 6"H x 9"W x 95"L WT: 21 lbs UPC: 776113312001 Owner's Manual (pdf)

Read more less

Dock Edge Premium Mooring Whip 2pc 8ft.The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip.Dock-Side PremiumThese Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats' position. Exclusive "Plug & Socket" design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included.Product Specifications: Part No.: 3200-F Description: Mooring Whip, 8', Lines&Hdw, 2500 lb. cap. Weight: 15 lbs. Packaging Dimensions: 95 x 8.5 x 5.25 inches Specifications: Length: 8' Box Dimensions: 6"H x 9"W x 95"L WT: 16 lbs UPC: 776113320006 Owner's Manual (pdf)

Read more less

Dock Edge Premium Mooring Whip 2pc 12ft.The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip.Dock-Side PremiumThese Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats' position. Exclusive "Plug & Socket" design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included.Product Specifications: Part No.: 3400-F Description: Mooring Whip, 12', Lines&Hdw, 5,000 lb. cap. Weight: 8.8 lbs. Packaging Dimensions: 86.25 x 3.5 x 1.75 inches Specifications: Length: 12' Box Dimensions: 6"H x 8"W x 85"L WT: 23 lbs UPC: 776113340004 Owner's Manual (pdf)

Read more less

Valve ScrewReplacement valve screw for Polyform US inflation valves.*Sold as an Individual Owner's Manual (pdf)

Read more less

G-1 Twin Eye Fender 3.5" x 12.8" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Sand Height: 12.8" Width: 3.5" Box Dimensions: 1"H x 3"W x 6"L WT: 0.8 lbs Brochure (pdf)

Read more less

G-2 Twin Eye Fender 4.5" x 15.5" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Sand Height: 15.5" Width: 4.5 Box Dimensions: 1"H x 3"W x 6"L WT: 1.5 lbs Brochure (pdf)

Read more less

5" Set Back Transom Mount Bracket - Black - Powder CoatPanther KPS50B Transom Mount Brackets comes as a length of 5" and built from quality and durable materials for use in marine environments. Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket. No loose parts that can fall in the water.Features: No loose parts that can fall in the water Anodized material Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock Quick and easy installation

Read more less

Line & Utility Holder - 2-PackMade from high impact polyethylene (HDPE) to prevent cracking or deteriorating and ensure a longer life. Mounts easily with three screws. Use 1-1/2" or 2" screws for secure mount.

Read more less

Stand-Off Flip-Up Polyethylene Roto Molded 4-Step Dock Ladder - GreyTough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting out of the water easier. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides. Rail Height: 20-1/2" above the dock Distance to first step: From dock surface, 12-1/2" & 10-1/2" between steps Steps: Are 6-1/2" deep and 14" wide Capacity: 500lb (227 kg) Specifications: Construction: Plastic Step Count: 4 Step Box Dimensions: 12"H x 21"W x 54"L WT: 26 lbs UPC: 776113208403

Read more less

Fender Holder w/Adjuster - WhiteTough and durable PVC mounting strap snaps over railings, lifelines or stanchions. Allows fender lines to be adjusted to length in a matter of seconds.

Read more less

G-6 Twin Eye Fender 11" x 30" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 30" Width: 11" Box Dimensions: 1"H x 3"W x 6"L WT: 6.65 lbs Brochure (pdf)

Read more less

Dock Edge Dolphin Dockside Bumper 7" x 16" The ultimate in heavy impact protection Rugged, air filled Heavy-wall molded PVC & integral inflation valve Angled ends to deflect craft Use Straight bumpers in pairs to form inside corners Excellent gunnel protection Industrial Strength with the Standard Quality and Performance of Dolphin FendersProduct Specifications: Part No.: 1060-W-F Description: Dock-Side Dock Bumper, 7" x 16", White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 7"H x 7"W x 16"L WT: 2.7 lbs UPC: 776113106013

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.5 lbs Brochure (pdf)

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.5 lbs Brochure (pdf)

Read more less

HTM-1 Fender 6.3" x 15.5" - Black with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 15.5" Width: 6.3" Box Dimensions: 1"H x 3"W x 6"L WT: 2.7 lbs Brochure (pdf)

Read more less

FX-23 Anchor - 15lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 39' to 45' (12 to 14 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 2,000lb (907kg) Shank Length - 36" (914mm) Fluke Length - 21" (533mm) Stock Length - 29" (737mm) Weight - 15lbs (6.8kg) *Sold as an Individual  Specifications: Weight (lbs): 15 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 4"H x 8"W x 38"L WT: 17.1 lbs UPC: 647124120230 Quick Guide (pdf)Brochure (pdf)

Read more less

Generation 2 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

Cone and Washer Kit v/CPX and V Series Windlasses Replacement cones and washers for CPX and V series windlasses.Compatible With:CPX and V Series windlassesIn the Box: Cones x two (2) Washers x two (2)  Instruction manual  *Sold as an Indivudual

Read more less

Super Gard™ 6.5" x 22" Inflatable Vinyl Fender - BlueTaylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Boat Size: 20' to 25' Recommended inflation is 2 psi. * The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Lifetime Warranty against splitting or bursting Specifications: Color: Blue Height: 22" Width: 6.5" Box Dimensions: 8"H x 8"W x 22"L WT: 2.7 lbs UPC: 040011007896

Read more less

V700 Gear Set Replacement gear set for V700 windlass.Compatible With:Lewmar V700 windlass*Sold as an Individual Owner's Manual (pdf)

Read more less

V700 Compound Gear Assembly Replacement compound gear assembly for V700 windlass.Compatible With:Lewmar V700 windlass*Sold as an Individual  Owner's Manual (pdf)

Read more less

Lewmar Deck Foot Switch - Windlass Up - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

Deck Foot Switch - Windlass Up - White PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Read more less

Anchor Safety Strap - 18"Safety straps will prevent the Anchor from deploying if the Anchor is unintentionally released or powers out accidentally. It is simply clipped on the chain, shackle, or Anchor. They do not secure (hold tight) the Anchor in the bow roller.Lewmar recommends securing the anchor to the boat when not in use.  The windlass is not designed to hold the anchor to the boat when not in use.Technical Specifications: Material - Stainless Steel Length - 18" *Sold as an Individual

Read more less

Fixed Anchor Swivel - 3/8" to 7/16"Heavy-duty 360-degree anchor swivel.  Used to attach line and chain or chain and anchor.Compatible with:3/8" to 7/16" ChainFeatures: Stainless Steel screw pins Stainless Steel swivel pins Technical Specifications:Material - 316 Stainless Steel*Sold as an Individual

Read more less

Ring Buoy Holder w/30' Heaving LineFeatures: Ring holder is constructed from anodized aluminum Fits all sizes of ring buoys Comes complete with 30' mildew resistant, white U.V. polypropylene floating heaving line with attached rope float Float also sold separately for use with swim area floating ropes or nets Accommodates rope up to 3/8" in diameter

Read more less

12V Motor for Windlass V2This 12V motor is designed to power Lewmar's Windlass V2.

Read more less

Generation 3 Pro-Series Gears and Shaft Kit Gears and shaft kit for Generation 3 Pro-Series windlasses.Compatible With: Pro-Series Generation 2 windlasses*Sold as an Individual 

Read more less

Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

Pro-Series Horizontal 700 Windlass Kit - 12VPraised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats. It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system.Anchoring has never been easier.Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 32' Mounting Position - Horizontal In the Box: Windlass Switch Circuit breaker Dual direction contactor/solenoid Instruction manual *Sold as an Individual Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .5 Vertical/Horizontal: Horizontal Box Dimensions: 9"H x 11"W x 12"L WT: 30 lbs UPC: 743683306488 Owner's Manual (pdf)

Read more less

Replacement Windlass Motor Kit - 12VReplacement Windlass Motor.Compatible with:  Lewmar V700  Lewmar Sprint 600  Technical Specifications: Power Supply - 12V Current Draw - 40Amp In the Box: Motor Gasket Mounting hardware *Sold as an Individual

Read more less

Pro-Sport 550G Horizontal Windlass Kit - 12VLewmar’s Pro-Sport windlass is designed as an economical package for rope and chain applications, without compromise on quality or performance. Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice.  Complete with push-button control, anchoring has never been easier. Features: Low power consumption / current draw Dual direction powered operation Convenient above-deck installation Manual freefall DIY ready Technical Specifications: Chain Size - 1/4" G4 or BBB Rope Size - 1/2" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 150 Watt Maximum pulling power - 550lb (250kg) Maximum Working Load - 137lb (62.12kg) For boats up to 28' (9M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Contactor Rocker switch Instruction manual  *Sold as an Individual Owner's Manual (pdf)

Read more less