Wireless Remote Key FOBWireless remote for use with Xi series motorsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Active Imaging 3-in-1 Nosecone for Ghost Trolling MotorAnglers get powerful fish-finding capability and high-resolution images of structure and cover below and to the sides of the boat with the optional Active Imaging 3-in-1 Nosecone transducer with Lowrance CHIRP, SideScan and DownScan Imaging™. The Active Imaging 3-in-1 Nosecone is easy to install and gives anglers with a compatible display the option to view the best of Lowrance CHIRP and DownScan Imaging on one screen with the exclusive FishReveal™ view.Features Easy to Install Supports 83/200/455/800kHz frequencies Lowrance CHIRP SideScan DownScan Imaging FishReveal™ Temperature Sensor

Read more less

Recon™ Quick Release Bracket - HD Composite - BlackRemoving the trolling motor from a boat is quick and easy with the Heavy-Duty Composite Quick Release Bracket. Compatible with all Lowrance electric steer trolling motors and most non-Lowrance electric steer motors. The trolling motor is fastened securely to the boat with the bracket’s locking U-bar design, and a security locking point is available for use with a padlock (sold separately). Features: Compatible with all Lowrance electric steer trolling motors and most non-Lowrance freshwater electric steer motors Locking the U-bar secures the trolling motor to the baseplate Designed for use in freshwater environments Available security locking point for use with padlock (sold separately)

Read more less

TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips 2-connector kit Safe and easy Semi-gloss finish

Read more less

PowerPlus 36V 18 AMP On-Board Battery Charger & Maintainer Versatile Battery Compatibility: Lead-Acid:Effectively charges traditional lead-acid batteries. AGM:Optimizes charging for advanced AGM batteries. Lithium:Delivers precise charging profiles for lithium-ion batteries, including 36V lithium marine trolling motor or golf cart batteries. Built for Harsh Environments: IP68 weather-resistant:Withstands rain, snow, dust, and even submersion for extended periods. Perfect for year-round golf cart storage or charging outdoors, or marine applications where exposure to the elements is common. Shock and vibration resistant:Engineered to handle the demands of golf cart operation on uneven terrain or marine environments with rough water conditions.   The Battery Tender® PowerPlus 18 AMP On-Board 36V Battery Charger and Maintainer provides high-voltage power in a compact package. This IP68 weather-resistant charger offers several interchangeable adapters for golf carts or marine applications. The ring terminals directly connect to your battery for optimal charging. Mounting brackets make on-board installation seamless so your charger stays secure. PowerPlus chargers are also available for additional applications in 12V, 24V, and 48V. Features: STAY CHARGED: This 18 AMP Charger provides a full charge to your 36V battery before automatically switching to float mode maintaining proper voltage levels without overcharging.  PROTECTED: Rated IP68 weather resistant and shock and vibration resistant; with safety features including spark-proof and reverse charging protection.  CONNECT AND FORGET: With a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage spaces for your convenience  SAFE AND SECURE: Spark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power.  Includes:  36v 18 AMP Battery Charger Mounting Hardware 6.5' AC input 4.9' DC output cables 12' Accessory cables Reach 12 Feet Dimensions 11.88" x 7.48" x 3.22", 7.67 lbs Included in the Box 36V 18 AMP battery charger, mounting hardware, 6.5 foot AC input, 4.9 foot DC output cables, 12 foot accessory cables, ring terminal cables with 40A fuse Warranty 2 Year   DC Power Connector - Plug & Receptacle Battery Tender® Black Power Connect Trolling Motor D/C Connector is an onboard connector for DC to DC connections. Perfect for battery connections to trolling motors, navigational electronics, or any DC accessory. The unique screw and lock device provides a positive connection that avoids vibration and water incursion. More Power, Less Weight Upgrade your marine vehicle’s power supply and electrical flow with the Battery Tender® DC Power Connector for trolling motors, navigational electronics, and other DC accessories. Weighing just over 7 ounces, our small 2-pin connector is rated at 80 amps of continuous service, allowing for a more powerful power source without weighing you down.  Built to Last  Engineered with only the best materials, we have the utmost confidence in our trolling motor plug's ability to handle the rigors of the water. We’ve even included a 5-year warranty that covers material and workmanship defects for your peace of mind. The internal and external hardware feature corrosion-resistant stainless steel with silver-plated copper contacts to last longer and be trusted to get the job done time and time again.  Features: Easy configuration  For 12, 24, 36, and 48 Volts Applications: Receptacle, plug, gasket, and cable cover screws (2) Specifications: Voltage Rating: 0-48VDC (UL), 0-48VDC (CSA) Current Rating Amperes (with a 6-AWG wire connection): 80 amps (UL), 40 amps (CSA) Volts: DC only Housing Flammability: UL94HB Class (3) (4) Connector Weight: 0.45 lbs Connector Dimensions (inch): 2" X 3.25" X 3.5" Total Kit Weight: 0.05 lbs Receptacle Connector Dimensions (inch): 1.5" X 3" X 1"  

Read more less

Actuator Caps, Position Sensors & 30' CableActuator Upper Hinge with Coil – PortWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

The Big D - Trolling Motor HandleFeatures: Comfort grip handle Large D shape that fits your hands!  No more grabbing with only your finger tips! Cable molded into handle so can’t break out 3 different Stainless steel cable clamps allowing installation on 99.9% of all trolling motors! Strong Cable Works with most trolling motors *DOES NOT work with Lowrance Ghost or Garmin Force at this time.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

1.5" Riser Kit for Sea Swivel XL MountPrecision-cut CNC-machined 1.5-in starboard riser for the Sea Swivel Trolling Motor XL Mount to clear toe kicks, nav lights, cleats, etc... Includes:(1) White 1.5" Riser Kit 10"x10" with 4x5" mounting bolts & 6" main bolt

Read more less

Sea Secure Titanium Trolling Motor Security Bolt for Minn KotaTruly game-changing: the first-of-its-kind Grade 5 Titanium Trolling Motor Lock Assembly—engineered to work with multiple quick-release brackets.Features: No more rust stains No more seized locks No more clunky padlocks scratching your gelcoat Just a sleek, corrosion-proof solution that secures with a custom bolt-style key - simple, clean, and built to last

Read more less

G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Small Offset Trolling Motor Plate for Garmin KrakenThe Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18.5" x 13.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

20" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42).Specifications:Plate Dimensions (inches): 20" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

16" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

20" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:20" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Small Offset Trolling Motor PlateThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Small 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42 ) offset mounting plate (18.5" x 13.5" x 1/2").Suggested Hardware: 1/4" - 20 phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

16" Straight Trolling Motor Plate - BlackThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation, 1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42).Specifications:Plate Dimensions (inches): 16" x 8" x 1/2”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62/ RTA-42

Read more less

14" Straight Trolling Motor Plate - BlackThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation, 1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42).Specifications:Plate Dimensions (inches): 14" x 8" x 1/2”Suggested hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62/ RTA-42

Read more less

12" Straight Trolling Motor Plate for Garmin Force® KrakenThe Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate is designed for the Garmin Quick Release Plate System. It offers a robust, reliable solution for installing any Force Kraken Trolling Motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications:Size: 12” x 8” x 1/2”Recommended Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 12 Inch Straight Trolling Motor Mounting Plate designed for the Garmin Quick Release Plate System.

Read more less

14" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions:14" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

14" Straight Trolling Motor Plate for Garmin KrakenThe Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:14" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

5/16" Backing Disk for Garmin Kraken Mounts - 2-PackSpecifications: Size: 5/16" Backing Disk Specifically for Kraken Mount 2-Pack

Read more less

Bracket Mounting Disks - Quantity 6An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the boat where the trolling motor is attached. Benefits of Using Mounting Disks: Load Distribution: Multiple backing supports can distribute the load over a wider area compared to a single backing plate Flexibility: Using multiple backing supports allows for more flexibility in positioning and alignment Accessibility:  Using multiple backing supports can make it easier to maneuver and install the components in tight spaces, as you can insert them one by one and secure them individually *When using these backing disks, it is important to always have a fender washer between the disk and the lock nut. These disks are designed to work with 1/4-20 Phil flat machine screws. Sea Brackets recommends using machine screws with coarse threads.

Read more less

60A Circuit BreakerUse this 60A circuit breaker when installing a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor Specifications: Amperage: 60a Box Dimensions: 1"H x 2"W x 3"L WT: 0.15 lbs UPC: 753759246495

Read more less

Large Offset Trolling Motor Plate - BlackThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder-coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Large 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42 ) offset mounting plate. (18.5” x 15.5” x 1/2”).Suggested Hardware: 1/4" - 20 Phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54-RTA-62-RTA-42

Read more less

Small Offset Trolling Motor Plate - BlackThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder-coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Small 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42 ) offset mounting plate (18.5" x 13.5" x 1/2").Suggested Hardware: 1/4" - 20 Phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54-RTA-62-RTA-42

Read more less

Trolling Motor Power ReceptacleUse this to add a 70A power receptacle to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

3/4" Riser for Troll TrackFor use with Troll Track Adjustable Trolling Motor Mount.

Read more less

Pinpoint GPS Replacement RemoteReplacement remote for use with Xi5 ModelsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

18" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Small Offset Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 18.5" x 13.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Sea Secure Titanium Trolling Motor Security Bolt for Garmin KrakenTruly game-changing: the first-of-its-kind Grade 5 Titanium Trolling Motor Lock Assembly—engineered to work with multiple quick-release brackets.Features: No more rust stains No more seized locks No more clunky padlocks scratching your gelcoat Just a sleek, corrosion-proof solution that secures with a custom bolt-style key - simple, clean, and built to last

Read more less

18" Straight Trolling Motor Plate for Minn Kota QuestThe Sea Brackets 18-inch Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 or RTA-83 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications: Size: 18” x 10” x 1/2”Recommended Hardware:316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55/RTA-83 or MKA-56 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 18-inch Straight Trolling Motor Mounting Plate designed for all RTA-55 and MKA-56 Quest series trolling motors.

Read more less

3/4" Riser Kit for Sea Swivel MountPrecision-cut CNC-machined 3/4-in starboard riser for the Sea Swivel Trolling Motor Mount to clear toe kicks, nav lights, cleats, etc... Includes:(1) White 3/4" 8x8" King Starboard Riser

Read more less

Pontoon Outboard BracketThe Toon Kicker outboard motor bracket is designed for mounting a kicker motor to a pontoon.Features & Benefits: Made in the USA Consume less fuel while cruising around the lake Saves hours of wear on a big motor Operating restrictions on certain waters Back-up motor in the event of an emergency

Read more less

Mag Mount Trolling Motor Support Arm - 5.75"-9" ***Not compatible with Minn Kota Quest Motors!***The Mag Mount is the first of its kind, neodymium magnetic trolling motor support arm, crafted from high-quality Grade 5 titanium and double-coated UV-resistant rubber magnets. Designed to keep your trolling motor head stable while underway, the Mag Mount deploys with your motor head, keeping your deck clear of trip hazards and line catchers thanks to our flush-mounted magnet system. Installation has never been easier with a single screw mounting system; it can be installed virtually on any flat surface. When not in use with the trolling motor, the magnet serves as a handy place to hold hooks, fishing pliers, and more. With the Mag Mount, you’ll have a snag-free, streamlined deck and reliable magnetic support right where you need it. There's no snag with the Mag!*Please measure your trolling motor before ordering.*Mag Mounts are not compatible with Minn Kota Quest Trolling Motors.Take a measurement from the top of your gunnel to the bottom of your trolling motor shaft (right under trolling motor head) when in the STOWED position. This measurement cannot exceed 9". Completely adjustable height from 5.75" up to 9" when measured from the top of gunnel to bottom of trolling motor shaft. If a longer one is needed, there will be an XL version.

Read more less

Trolling Motor Foot TrayFish in comfort and streamline your deck! Reduce back and foot pain and fish all day with the Panther Recessed Foot-Control Tray. The tray mounts flush to your boat and levels out the foot pedal while you fish. This unit adds a clean look to your deck and easily fits all Minn Kota and MotorGuide foot-control trolling motors. Easy installation and maintenance free. Features: Forward taper design makes the foot pedal level and drains water faster; Water flows through a 3/8" ID x 8' flexible vinyl tube Constructed of high-impact, UV-resistant, high-density polyethylene Color-molded throughout, no paint to chip or fade Installs easily in any brand boat, and includes installation instructions, cutting template, drain tube, and hardware Fits all Minn Kota and MotorGuide foot-control trolling motors

Read more less

Pinpoint GPSMotorGuide's proprietary Pinpoint GPS technology - available either integrated with select models or as an easy upgrade. Pinpoint uses an ultra-precise GPS receiver and precision control algorithms for incredibly accurate performance.A compact, easy-to-use remote controls these Pinpoint features:Anchor Holds boat position on a fixed GPS coordinate Stores and recalls up to eight positions While in Anchor mode, the directional controls can be used to move the boat in 5-foot increments in any direction Heading LockNavigates the boat to a specific compass headingRouteRecord and playback up to eight routes of up to four miles eachCruise ControlHold a GPS speed while navigating a heading or routeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

lil' Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hp Locks "down" for trolling, "up" for cruising Made of highest quality polycarbonates with stainless steel hardware Owner's Manual (pdf)

Read more less

G-Force ELIMINATOR Black Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

Quest Adapter Plate for Troll Track MountThis is the adapter plate that is needed if you wish to use your Minn Kota Quest motor on the Troll Track. Backed by a limited lifetime warranty.

Read more less

Ghost X Indicator Upgrade KitThe Ghost X indicator kit is a replacement for Ghost and Ghost X Trolling Motors.This can be used as a direct replacement for existing indicators on Ghost X or as an upgrade for Ghost Trolling Motors. The kit allows the indicator arrow to track 1:1 with the lower unit, providing even greater accuracy and visibility than previous Ghost models, helping you make the perfect cast every time. This is crucial for getting the most out of your live sonar set-up.The arrow also has raised chevrons for better visibility of the lower unit direction from all around your boat.Features: 1:1 tracking with the lower unit Raised chevrons for visibility all around your boat Compatible with all Ghost and Ghost X models

Read more less

RECON™ Quick Release Bracket - HD Composite - WhiteWith Simrad's Heavy-Duty Composite Quick Release Bracket, removing a trolling motor from the boat is quick and easy. Compatible with all Lowrance and Simrad® electric steer trolling motors and most non-Lowrance electric steer motors. The sturdy, composite bracket is built to withstand the harshest saltwater conditions. The trolling motor is fastened securely to the boat with the bracket’s locking U-bar design, and a security locking point is available for use with a padlock (sold separately).  Features: Compatible with all Lowrance & Simrad® electric steer trolling motors and most non-Lowrance saltwater electric steer motors Locking the U-bar secures the trolling motor to the baseplate Designed to withstand harsh saltwater environments Available security locking point for padlock (padlock sold separately)

Read more less

Force®/Force® Kraken Anode KitUse this to replace the anode included with the Force trolling motor.

Read more less

Trolling Motor Power PlugUse this to add a 70A power plug to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less