VE.Can RJ45 Terminator - Bag of 2This bag contains two VE.Can RJ45 terminators. The terminators are included with some other Victron products, for example, the CANUSB.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Package Qty: Two Box Dimensions: 1"H x 1"W x 11"L WT: 0.1 lbs UPC: 8719076019923 Quick Guide (pdf)

Read more less

Universal Speaker Connector Kit f/16-14 AWG Wire GaugeMarine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative), depending on speaker manufacturer. Universal Speaker Connector Kits include two .250 tabs, two .188 tabs and two .110 tabs female heat shrink disconnects that enable installation of two speakers regardless of manufacturer. Female heat shrink disconnects are the optimal connector for speaker installation as they provide a sealed connection against the marine environment.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Disconnects Package Qty: 1 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.03 lbs UPC: 091887983258

Read more less

Lead Battery Terminal - 5/16" & 3/8" Stud - Positive & Negative Combo PackStud Size:5/16 " & 3/8"Product Features: Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Battery Terminals Post Size: 5/16" & 3/8" Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 1"W x 1"L WT: 1.5 lbs UPC: 091887263251 Quick Guide (pdf)

Read more less

Tinned Lug 3/0 AWG - 3/8" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 3/0 AWG Stud Size: 3/8" Length (inch): 2.172" Width (inch): 0.906" Clearance (inch): 0.500" Package Size: Ten included Specifications: Gauge: 3/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 1"H x 4"W x 5"L WT: 0.6 lbs UPC: 840248205672 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2-PackCable Gauge: 2Screw Size: 3/8" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Gauge: 2 AWG Post Size: 3/8" Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.06 lbs UPC: 091887254068 Quick Guide (pdf)

Read more less

12 Position Female Deutsch Connector with Wedge LockThe DTO4-12P and DTO6-12S connectors are part of the DT series and form a complete 12-cavity connection. These Deutsch-compatible connectors are fully interchangeable with matching Deutsch parts.Designed for reliability in harsh environments, the DT series can deliver up to 13 amps continuously. This 12-pin DT connector provides secure, weather-resistant connections ideal for marine, automotive, and industrial wiring applications.Its rugged housing, corrosion-resistant contacts, and reliable locking mechanism ensure long-lasting performance, making the 12-pin DT connector perfect for high-demand electrical systems and professional installations in harsh environments.Features: Comes in bags of 100 with a separate bag of wedge locks included Male uses Solid 14AWG Machined Terminal or Stamped DT Crimp Female uses DT Machined 14-16AWG Machined Terminal or DT Crimp Stamped and Formed Terminal Specifications: Heat Shrink: No Package Qty: 100 Box Dimensions: 2"H x 2"W x 4"L WT: 0.01 lbs UPC: 810196333185 Brochure (pdf)

Read more less

16-14 Gauge Heat Shrink Step-Down Multi-Wire Connectors - 25-PackAncor's assortment of adhesive lined heat shrink butt connectors can be used as a step-down from one gauge size to another or as a multi-wire connector for one gauge size wire. These connectors offer a sealed alternative for products such as a quick-tap or 3-way connector in areas where corrosion is a concern.Features: 4:1 shrink ratio tubing to ensure a watertight seal between wires Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp Crimp indicator on barrel for proper placement of installation tool Clear heat shrink tubing ensures crimp accuracy Colored stripes on the barrel indicate which crimp die to use, regardless of application WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Butt Connectors Package Qty: 25 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 8"L WT: 0.23 lbs UPC: 091887983319 Quick Guide (pdf)

Read more less

Tinned Lug 2 AWG - 1/2" Stud Size - 10 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 2 AWG Stud Size: 1/2" Length (inch): 1.750" Width (inch): 0.766" Clearance (inch): 0.406" Package Size: Ten included Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 1/2" Type: Lugs Box Dimensions: 1"H x 4"W x 6"L WT: 0.3 lbs UPC: 840248205573 Quick Guide (pdf)

Read more less

Tinned Lug 6 AWG - 3/8" Stud Size - 2 PackLugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables.Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 6 AWG Stud Size (inch): 3/8" Length (inch): 1.406" Width (inch): 0.609" Clearance (inch): 0.406" Package Size: Two included Specifications: Gauge: 6 AWG Heat Shrink: No Package Qty: 2 Post Size: 3/8" Type: Lugs Box Dimensions: 1"H x 1"W x 4"L WT: 0.1 lbs UPC: 840248205887 Quick Guide (pdf)

Read more less

16-14 AWG Heat Shrink Ring Terminal - #10 Stud Size - 25 PackRing terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size: #10 Terminal Pad Width (inch): 0.32” Package Size: Twenty-five included Specifications: Gauge: 16-14 AWG Heat Shrink: Yes Package Qty: 25 Post Size: #10 Type: Ring Terminals Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 840248206228 Quick Guide (pdf)

Read more less

90° Tinned Copper Lug #4/0 - 3/8" - 2-Piece90° bend for ease of wire routing. Specifications: Heat Shrink: No Gauge: 4/0 AWG Type: Lugs Post Size: 3/8" Package Qty: 2 Box Dimensions: 1"H x 2"W x 4"L WT: 0.2 lbs UPC: 091887991819

Read more less

16-14 Gauge - #8 Heat Shrink Spade Terminals - 100-PackFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 16-14 mm: 1-2 Screw Size: 4mm Qty/Pkg: 100WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Spade connectors Package Qty: 100 Heat Shrink: Yes Box Dimensions: 2"H x 3"W x 4"L WT: 0.3 lbs UPC: 091887316353 Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy Duty Lugs - 1/0 Gauge Wire - 5/16" Post - 100-PackCable Gauge: 1/0Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Post Size: 5/16" Package Qty: 100 Heat Shrink: No Type: Lugs Gauge: 1/0 AWG Box Dimensions: 2"H x 6"W x 8"L WT: 4.33 lbs UPC: 091887249361 Quick Guide (pdf)

Read more less

3 Position Male Deutsch Connector with Wedge LockThe DTO4-3P and DTO6-3S connectors are part of the DT series and form a complete 3-cavity connection. These Deutsch-compatible connectors are fully interchangeable with matching Deutsch parts.Designed for reliability in harsh environments, the DT series can deliver up to 13 amps continuously. This 3-pin Deutsch connector provides a secure, weather-resistant connection ideal for marine, automotive, and industrial wiring applications.Each 3-pin Deutsch connector features a rugged housing, corrosion-resistant contacts, and a locking mechanism that ensures long-lasting performance even in extreme conditions, making it perfect for demanding electrical systems.Features: Comes in bags of 100 with a separate bag of wedge locks included Male uses Solid 14AWG Machined Terminal or Stamped DT Crimp Female uses DT Machined 14-16AWG Machined Terminal or DT Crimp Stamped and Formed Terminal Specifications: Heat Shrink: No Package Qty: 100 Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 810196333130 Brochure (pdf)

Read more less

DT Deutsch Receptacle Repair Kit - 14-18 AWG (2 Position)Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wire. However, DT series connectors are designed for 18-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (18-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.Features: Packs include all parts needed to assemble a connector One to two extra terminals Cavity plugs to seal open circuits Applications: Wire-to-wire applications Enclosed connectors offer field-proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K EU RoHS/ELV Standard UL-94 Recognized Characteristics: Wedge locks ensure contact alignment and retention Redundant Silicone Seals Hand-insertable and removable contacts Technical Specifications: Number of Cavities: 2 Housing: Rectangular receptacle, plastic reinforced with glass fiber Contact Size: 16 (13 amp) Wire Size: 14 AWG Holds Pin/Socket: Pins Operating Temperature: -55°C to 125°C  Contents:  (1) 2 pos. receptacle (1) 2 pos. wedge lock (3) pins Quick Guide (pdf)

Read more less

12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 3-PackGauge Size: 12-10Screw Size: 3/8"Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Ring Terminals Post Size: 3/8" Package Qty: 3 Heat Shrink: Yes Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs UPC: 091887316209 Quick Guide (pdf)

Read more less

12-10 Gauge - #10 Heat Shrink Ring Terminal - 3-PackGauge Size: 12-10Screw Size: #10Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: #10 Package Qty: 3 Heat Shrink: Yes Gauge: 12-10 AWG Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs UPC: 091887316087 Quick Guide (pdf)

Read more less

12-10 Gauge - 1/4" Heat Shrink Ring Terminal - 3-PackGauge Size: 12-10Screw Size: 1/4"Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Ring Terminals Post Size: 1/4" Package Qty: 3 Heat Shrink: Yes Box Dimensions: 1"H x 2"W x 4"L WT: 0.03 lbs UPC: 091887316254 Quick Guide (pdf)

Read more less

12-10 Heatshrink Butt Connectors - 25-PackGauge Size: 12-10Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 12-10 mm: 3-5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Butt Connectors Package Qty: 25 Heat Shrink: Yes Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 091887308006 Quick Guide (pdf)

Read more less

16-14 Gauge - 5/16" Heat Shrink Ring Terminal - 100-PackWire Range:16-14Screw Size:5/16"Quantity: 100Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Ring Terminals Package Qty: 100 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 8"L WT: 0.33 lbs UPC: 091887313185 Quick Guide (pdf)Brochure (pdf)

Read more less

22-10 AWG Heat Shrink Butt Connectors - 10 PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.Features: Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength UL listed and CSA recognized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Butt Connectors Package Qty: 10 Heat Shrink: Yes Box Dimensions: 1"H x 3"W x 4"L WT: 0.06 lbs UPC: 091887319996

Read more less

8 AWG - 5/16" Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: 5/16" Package Qty: 25 Heat Shrink: No Gauge: 8 AWG Box Dimensions: 1"H x 3"W x 4"L WT: 0.24 lbs UPC: 091887212358 Brochure (pdf)

Read more less

16-14 AWG - #6 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Type: Ring Terminals Post Size: #6 Package Qty: 25 Heat Shrink: No Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 091887212112 Brochure (pdf)

Read more less

16-14 AWG - #10 Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Post Size: #10 Package Qty: 25 Heat Shrink: No Type: Ring Terminals Box Dimensions: 1"H x 3"W x 4"L WT: 0.09 lbs UPC: 091887212136 Brochure (pdf)

Read more less

8 AWG - 3/8" Nylon Ring Terminal - 25-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Ring Terminals Post Size: 3/8" Package Qty: 25 Heat Shrink: No Gauge: 8 AWG Box Dimensions: 1"H x 3"W x 4"L WT: 0.21 lbs UPC: 091887212365 Brochure (pdf)

Read more less

16-14 Heatshrink Butt Connectors - 3-PackGuage Size: 16-14Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 16-14 mm: 1-2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Butt Connectors Package Qty: 3 Heat Shrink: Yes Gauge: 16-14 AWG Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 091887307924 Quick Guide (pdf)

Read more less

12-10 Heatshrink Butt Connectors - 3-PackGuage Size: 12-10Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire range: 12-10 mm: 3-5 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Package Qty: 3 Heat Shrink: Yes Type: Butt Connectors Box Dimensions: 1"H x 2"W x 4"L WT: 0.03 lbs UPC: 091887307986 Quick Guide (pdf)

Read more less

12-10 Gauge Heat Shrink Step-Down Multi-Wire Connectors - 3-PackAncor's assortment of adhesive lined heat shrink butt connectors can be used as a step-down from one gauge size to another or as a multi-wire connector for one gauge size wire. These connectors offer a sealed alternative for products such as a quick-tap or 3-way connector in areas where corrosion is a concern.Features: 4:1 shrink ratio tubing to ensure a watertight seal between wires Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp Crimp indicator on barrel for proper placement of installation tool Clear heat shrink tubing ensures crimp accuracy Colored stripes on the barrel indicate which crimp die to use, regardless of application WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Butt Connectors Package Qty: 3 Heat Shrink: Yes Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 091887983326 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 100-PackCable Gauge: 2Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 100 Heat Shrink: No Gauge: 2 AWG Box Dimensions: 1"H x 6"W x 8"L WT: 2.73 lbs UPC: 091887249286 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 1/0 Gauge Wire - 5/16" Post - 25-PackCable Gauge: 1/0Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Package Qty: 25 Heat Shrink: No Gauge: 1/0 AWG Box Dimensions: 1"H x 3"W x 8"L WT: 1.09 lbs UPC: 091887246049 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 4 Gauge Wire - 1/2" Post - 2-PackCable Gauge: 4Screw Size: 1/2" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 1/2" Gauge: 4 AWG Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.04 lbs UPC: 091887253108 Quick Guide (pdf)

Read more less

Tinned Lug 1/0 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 1/0 Stud Size: 3/8” Length: 1.844” Width: 0.734” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 1/0 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.4 lbs UPC: 840248205375 Brochure (pdf)

Read more less

Tinned Lug 6 AWG - #10 Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 6 Stud Size: #10 Length: 1.266” Width: 0.438” Clearance: 0.344” Package Size:10 Specifications: Gauge: 6 AWG Heat Shrink: No Package Qty: 10 Post Size: #10 Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.15 lbs UPC: 840248209823 Brochure (pdf)

Read more less

Deutsch DT Receptacle & Wedge Lock Kit  - 3 Position - 10 PackProtecting electrical connections is an absolute must, and Deutsch Connectors are built for just that. DT Kit connectors are designed to create environmentally sealed electrical connections. Waterproof and resistant to vibration and shock, these Kits are built to last. What are DT series connectors? Well, DT Series connectors are specifically designed for 20-14 AWG applications. These connectors offer users the ability to use multiple size 16 contacts (20-14 AWG). These DT kits are perfect for field use. They are easy to install, connect, and disconnect. Pacer's DT Kits contain housing and wedge lock only. Pins and sockets to accompany these kits are sold separately. Contact a Pacer expert today with any questions that you have.Features:Kits with cavities (2, 3, or 4) include housing (10 pieces) and wedge lock (10 pieces)Applications: Wire-to-wire applications Enclosed connectors offer field-proven reliability and rugged quality Characteristics: Wedgelocks ensure contact alignment and retention Redundant Silicone Seals Hand-insertable and removable contacts Compliances: Ingress Protection (IP) Level: IP67 EU RoHS/ELV Standard UL-94 Recognized Specifications: Number of Cavities: 3 Cavity Style: Receptacle (Pin) Package Size: 10 Housing: Rectangular Receptacle, Plastic reinforced with glass fiber Contact Size: 16 (13 Amp) Wire Size: 20-14 AWG Operating Temperature: -55°C to 125°C Brochure (pdf)

Read more less

Tinned Lug 4 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 4 Stud Size: 3/8” Length: 1.688” Width: 0.531” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 4 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.2 lbs UPC: 840248205795 Brochure (pdf)

Read more less

Tinned Lug 4 AWG - 5/16" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 4 Stud Size: 5/16” Length: 1.50” Width: 0.531” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 4 AWG Heat Shrink: No Package Qty: 10 Post Size: 5/16" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.2 lbs UPC: 840248205818 Brochure (pdf)

Read more less

Tinned Lug 2 AWG - 3/8" Stud Size - 10 PackCreating a strong connection is essential to every electrical system. By using closed-end lugs, users get not only durability but longevity as well. Pacer's closed-end lugs are tin-plated and have no exposed seams. This means that they are ideal for marine applications. What makes them ideal is the fact that they can be used to create waterproof connections. When used with epoxy heat shrink, the closed end lug will fully envelop the conductor. This leaves nothing exposed to the elements. To use, simply strip your wire or cable to the proper length. Once this is complete, slide the lug over the exposed wire, making sure the insulation butts up to the edge of the lug.Now, crimp the lug using the correct tool, and you're done. Add epoxy lined heat shrink for added durability. Pacer's closed-end lugs are available in 8 AWG to 4/0 AWG wire sizes. The available stud sizes include #10, 1/4", 5/16", 3/8", and 1/2". Selecting the correct closed-end lug isn't an easy task. Contact a Pacer expert today with any questions that you may have.Features: Tin Plated No exposed seams Rated for 600V Made from seamless tubes of 99.9% copper for higher conductivity Designed for stranded copper wires Larger pad area for better contact Cable size and stud hole stamped on pad Can be crimped or soldered Highly controlled flare to allow easy cable insertion Tight barrel to pad transition provides longer usable barrel length Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant Exceeds SAE Conductivity STD J163 & J1811 Specifications: Wire AWG: 2 Stud Size: 3/8” Length: 1.625” Width: 0.609” Clearance: 0.406” Package Size: 10 Specifications: Gauge: 2 AWG Heat Shrink: No Package Qty: 10 Post Size: 3/8" Type: Lugs Box Dimensions: 0"H x 5"W x 9"L WT: 0.25 lbs UPC: 840248205610 Brochure (pdf)

Read more less

40A Euro Style Terminal Block - 12 Positions - 5 PackPacer's European terminal blocks are constructed from 6/6 nylon and incorporate tin-plated brass inserts for corrosion resistance. They also carry wire protectors to prevent stranded wire from being damaged during the installation process. Each European terminal block is built to handle the harshest marine conditions. Selecting the correct European terminal block for your application is not an easy task. Contact a Pacer expert with any questions that you may have. Features: Recessed screws and terminals to avoid shock hazard Closed-back design to prevent moisture intrusion Easily cut Applications: Distributing voltage and power out to smaller circuits Combining grounds in an electrical system Compliances: UL Recognized CSA Certified Characteristics: Constructed from 6/6 nylon Tin-plated brass inserts Specifications: Number of Positions: 12 Amp: 40A max Volt: 300V max Wire: 10 AWG max

Read more less

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 2-PackCable Gauge: 2Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Lugs Post Size: 5/16" Gauge: 2 AWG Package Qty: 2 Heat Shrink: No Box Dimensions: 1"H x 2"W x 4"L WT: 0.06 lbs UPC: 091887254044 Quick Guide (pdf)

Read more less

22-18 Gauge - #8 Heat Shrink Ring Terminal - 3-PackGauge Size: 22-18Screw Size: #8 Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Nylon insulator, preferred by experts, for Marine Grade resistance to sunlight, water, oil, chemicals, vibration and cut-through damage. UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257 deg. F/125 deg. C. Operating temperature range 40 deg. C to 110 deg. C. ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance. Pure copper for maximum current flow. Brazed seam for maximum strength. Wire Range: 22-18 mm: 0.3-0.8 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Ring Terminals Post Size: #8 Package Qty: 3 Heat Shrink: Yes Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs UPC: 091887316261 Quick Guide (pdf)

Read more less

Nylon Fully Insulated Disconnect - Female - 22-18 - 25-PieceAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: 0.250 (6.4 mm) tab size Nylon insulated with insulation grip Double crimp, funnel entry UL 310 Specifications: Gauge: 22-18 AWG Heat Shrink: No Package Qty: 25 Type: Disconnects Box Dimensions: 1"H x 3"W x 5"L WT: 0.08 lbs UPC: 091887214086

Read more less

16-14 AWG - #8 Nylon Flanged Spade Terminal - 100-PackAncor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Spade connectors Package Qty: 100 Post Size: #8 Heat Shrink: No Gauge: 16-14 AWG Box Dimensions: 1"H x 3"W x 4"L WT: 0.28 lbs UPC: 091887223323 Brochure (pdf)

Read more less

22-18 Gauge Heat Shrink Step-Down Multi-Wire Connectors - 3-PackAncor's assortment of adhesive lined heat shrink butt connectors can be used as a step-down from one gauge size to another or as a multi-wire connector for one gauge size wire. These connectors offer a sealed alternative for products such as a quick-tap or 3-way connector in areas where corrosion is a concern.Features: 4:1 shrink ratio tubing to ensure a watertight seal between wires Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp Crimp indicator on barrel for proper placement of installation tool Clear heat shrink tubing ensures crimp accuracy Colored stripes on the barrel indicate which crimp die to use, regardless of application WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 22-18 AWG Type: Butt Connectors Package Qty: 3 Heat Shrink: Yes Box Dimensions: 1"H x 2"W x 4"L WT: 0.02 lbs UPC: 091887983289 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-PackCable Gauge: 2/0Screw Size: 3/8" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Heat Shrink: No Type: Lugs Post Size: 3/8" Package Qty: 2 Gauge: 2/0 AWG Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 091887257069 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 2 Gauge Wire - 5/16" Post - 25-PackCable Gauge: 2Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Package Qty: 25 Heat Shrink: No Gauge: 2 AWG Type: Lugs Post Size: 5/16" Box Dimensions: 1"H x 3"W x 5"L WT: 0.75 lbs UPC: 091887244045 Quick Guide (pdf)

Read more less

16-14 Gauge - 5/16" Heat Shrink Ring Terminal - 3-PackWire Range:16-14Screw Size:5/16"Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 16-14 AWG Package Qty: 3 Heat Shrink: Yes Type: Ring Terminals Post Size: 5/16" Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 091887313147 Quick Guide (pdf)

Read more less

12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 100-PackGauge Size: 12-10Screw Size: 3/8"Quantity: 100Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge: 12-10 AWG Type: Ring Terminals Package Qty: 100 Heat Shrink: Yes Post Size: 3/8" Box Dimensions: 2"H x 3"W x 8"L WT: 0.52 lbs UPC: 091887316247 Quick Guide (pdf)

Read more less

Heavy Duty Lugs - 4/0 Gauge Wire - 5/16" Post - 10-PackCable Gauge: 4/0Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Post Size: 5/16" Package Qty: 10 Heat Shrink: No Type: Lugs Gauge: 4/0 AWG Box Dimensions: 2"H x 3"W x 4"L WT: 1 lbs UPC: 091887249002 Quick Guide (pdf)

Read more less