Trailer LED Guide Light KitAttwood's LED Trailer Guide Lights provide excellent visibility while backing up and maneuvering your trailer. Guides allow for easy identification of trailer angle and assist when backing at boat ramps and tight areas. The LED lights provide bright indicators in low light conditions. The mounting bracket resists corrosion in the marine environment and is flexible when needed with a spring action base that prevents breaking. Easy installation to the trailer frame. 12 VDC low amp draw. Bright red color. 5 bright LED's Aluminum base attaches to guide posts or trailers Lights completely sealed and waterproof Lasts over 100,000 continuous hours Sold as a pair

Read more less

Adjustable Transom SaverThe transom saver adjusts from 28 in. to 59 in. to reach where others will not on hard to access trailer crossbars that extend under the boat. Comes with easy to install bracket attachment. Fits most popular brands of trailers and is easily removed for loading and unloading.Features: Adjustable from 28 in. to 59 in. Includes bracket attachment Fits most trailer brands Easily removable Owner's Manual (pdf)

Read more less

Adjustable Transom Saver - Composite - Roller/BoltProtect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during traileringProtect your boat and engine with Attwood Transom Savers: Support the cantilevered weight of the motor Stabilize engine and steering mechanism when trailering The Attwood Difference: Tough components - You'll get long life from our adjustable toggles with replaceable rubber padsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

Bow Roller - Black - 3" Diameter - 3-1/8"W - 1/2" IDBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features: Black natural rubber 3" Diameter 3-1/8" wide 1/2" shaft

Read more less

Mini G3 Retractable Transom Tie-Down System - 1" x 72" Just hook, ratchet and go! Never look for lost tie-downs again. The Mini G3 Transom tie-down can be permanently mounted with one bolt to most boat trailers. Six feet of one-inch webbing enables you to tie down more equipment in more applications, conveniently and securely.Features: Permanent one-bolt installation Self-retracting web Anti-corrosive construction Break Strength 1,400lbs/ea SWL 466lbs/ea Specifications: Length (Feet): 6' Diameter (Inches): 1" Box Dimensions: 3"H x 8"W x 13"L WT: 3.4 lbs UPC: 079111068773

Read more less

Universal Ladder Rack Tie-Down System - 2" Retractable Tie-Down - 1 PairLadder rack users can permanently mount the CargoBuckle Ladder Rack Tie-Down System to their truck racks. Valuable equipment is held securely with 7 feet of professional-quality 2′′ web and a strong double J-hook. The strap automatically retracts out of your way when not in use. The Ladder Rack Tie-Down System includes the CargoBuckle Retractable Ratcheting Tie-Down, the ladder rack universal mount adapter, and mounting hardware.Features: Complete ladder rack tie-down system for trucks with universal bracket for permanent mounting on square or round racks 7 feet of professional quality webbing and a strong double J-hook to secure your load Ideal for securing and towing a wide variety of gear — from powersports and automotive to hardware and building materials Systems are available to accommodate square racks and round ladder racks with the universal mount Universal mount for both Square or Round rack systems 2″ Break Strength – 2000 lbs. each 2″ Safe Working Load – 677 lbs. each Includes: Two retractable ratcheting tie-downs  Universal ladder rack adapter mount and mounting hardware Specifications: Weight: 5 kg Size: 2 in. Package Size: Includes two tie-downs

Read more less

Wire Harness Kit for RC23, RC30, 712, 912 & 915This selection comes with the wiring harness assembled for your installation: 60 AMP and plug. The 60 AMP Wiring Harness is used in the RC23, RC30, 712, 912, and 915 trailer winches.

Read more less

FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-PackThe Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.Features: 10 interlocking blocks stack to the desired height for customizable leveling Carrying handle easily twists to secure blocks together for storage Strong and durable construction Safe and easy to use Compatible with Camco Leveling Blocks

Read more less

5' Roller BunkRoller bunks make loading and unloading small craft at very short or even dry ramps easy. Great for ramps where it is not practical to float the boat onto the trailer. Pre-assembled and pre-drilled for easy installation. May be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards.Features: Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel Supports up to 1500lbs of well distributed weight Mounting hardware not included Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Roller Pontoon Guide-OnIdeal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Minimum friction rolling action easily guide pontoon boat onto trailer. Height is 25" above trailer frame. Mount with roller bunks 2-3" from pontoons on a trailer fram cross member. Features: Fits frames up to 3" wide x 4-1/4" tall U-bolt mounting brackets Includes two rubber roller bunks Galvanized steel construction Zinc plated hardware For larger trailer frames check out the Large Frame U-Bolt Kit (11416).WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Socket (712A, 912, 915, T2400, T4000, T3200PO, ST712, BH12, SH12HBM, AP3500) *No screws included 

Read more less

Heavy Duty Spare Tire Cover27410Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.Tire Size: 12"Diameter:21"Depth:6-1/2"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2" Hub Mudflap System - Matte Black/StainlessROCK TAMERS™ is the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris.Perfect solution for consumers who want the utility aspect of mudflaps and to maintain their vehicle’s stylish and attractive appearance.*This patented system is easy to attach or remove from any standard 2" ball mountFeatures: Mudflap height is adjustable to maintain consistent ground clearance when towing various loads Overall width is adjustable and easily fine-tuned to fit any small, full size, or dually truck Width expands from 67 1/4" to 96 3/4" Mudflap measures 24" x 24" In the Box: 2" Center Hub/Matte Black Finish M10 Ball Mount Clamp Bolt x 2 M10 Jam Nut x 2 M10 Split Washer and M10 Flat Washer x 2 Hub Arm R (Right)  and Hub Arm L (Left) x 1 M6 Arm Clamp Bolt x 6 M6 Nylon Insert Hex Nut x 6 M18 Arm Pivot Bolt/Split Washer/Flat Washer x 2 5MM Allen Wrench x 1 Flap Support Rod x 2 Rod End Cap and Flap End Cap x 2 M5 Flap Retainer and End Cap Bolt x 2 M5 Nylon Insert Hex Nut x 4 Flap Clamp / Matte Black Finish x 2 Mudflap (SS Trim Plate) x 2 M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10 Bolt Hole Punch x 1 Rock Tamers Trim Plate x 2 M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16 Locking STAR PIN™ Wrench x 1 Instruction Manual  x 1 *Sold as a KitWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Heavy Duty Trailer Dock/Jack Stand PadFeatures: For use with trailer pad or wheel jack stand Handles trailers for boats, snowmobiles, motorcycles, personal water craft, towables, RV/Campers Use on variety of surfaces Works on concrete, asphalt, sand, rock, dirt, grass - even muddy locations Lifetime warranty from cracking or breaking Tough enough to drive over guaranteed not to crush, crack, or break down Use Trailer Dock anywhere Can be used at camp site, driveway, garage, parking lot storage location or beach Lightweight Bring it along - it even floats Replaces those worn 2 by 4's No more sinking in the mud and no dents in the driveway Easy lift with the rope handle Specifications: Operation Method: Manual Box Dimensions: 3"H x 12"W x 12"L WT: 1.6 lbs UPC: 715456620008

Read more less

BoatBuckle® G2 Retractable Transom Tie-DownQuantity: 2Dimensions: 2"-43"Break Strength: 1,500 lbs./eaSafe Work Load: 500 lbsBoatBuckle® G2 is still the ultimate tie-down system in convenience, style and innovation in trailer boat rigging! As with all of our products, we trust the G2 will actually exceed all of your expectations... after all, our reputation is riding on it! Sleek, contoured styling Permanently mounts to trailer Stronger - 1,500 lb break strength Simple, one-hand operation Adapts to virtually any mounting angle Stainless steel power spring Specifications: Length (Feet): 43" Diameter (Inches): 2" Box Dimensions: 4"H x 10"W x 13"L WT: 4.93 lbs UPC: 079111142565 Quick Guide (pdf)

Read more less

Vertical Bunk Bracket Lanced - 9-1/2"Adjustable bunk bracket. Used when mounting bunks on edge. Ideal for small craft trailers. A single bracket will allow the bunk board to pivot with the hull as the boat is loaded. Double brackets hold the board in place.Features: 9-1/2" Slot 7/16" x 6" 11 gauge materical, galvanized finish Lanced style

Read more less

Tail Light ProtectorAdded protection for fragile trailer tail lights. Mounts between the existing tail light mounting brackets and the lamp using the two lamp mounting studs. Mounting holes fit standard DOT brake/tail lamps. No hardware required for installation. Aluminum tread 0.080" thick

Read more less

Vertical Bunk Bracket Dimpled - 7-1/2"Adjustable bunk bracket. Used when mounting bunks on edge. Ideal for small craft trailers. A single bracket will allow the bunk board to pivot with the hull as the boat is loaded. Double brackets hold the board in place.Features: 7-1/2" Slot 7/16" x 4-3/8" 11 gauge materical, galvanized finish Dimpled style

Read more less

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2" bunk flange hole centers & 1 hole centered 10 gauge material *Sold as kit with (2) brackets, (2) 7/16" x 1" head cap screws, and (2) 7/16" nylon lock nuts.

Read more less

Bolt-On Fender Step Pad - 3" Left Hand/Right HandThis fender step pad is ideal for the do-it-yourselfer. Step pad can be welded or bolted to your trailer fender. Step pad can also be bolted to your trailer frame with u-bolts. U-bolts NOT included.Features: Galvanized Finish 12 Gauge Steel 1-3/16"H x 3"W x 15-1/4"L Left Hand/Right hand

Read more less

Kwik-Lok Gunwale Tie-DownsQuantity: 1Dimensions: 2" x 13'Break Strength: 1,200 lbs./eaSafe Work Load: 400 lbsOur popular Kwik-Lok Gunwale feature 5,500 lb. polyester webbing, along with vinyl-coated steel hook Specifications: Length (Feet): 13' Diameter (Inches): 2" Box Dimensions: 3"H x 6"W x 8"L WT: 1.4 lbs UPC: 079111131149

Read more less

Multipurpose Ratchet Strap Tie-Down w/S-Hooks - 2" x 15'The multipurpose 2” ratchet features high-quality, corrosion resistant, solid steel core ratchet with vinyl-coated S-hooks. Break Strength 2,500lbs SWL 833lbs Specifications: Length (Feet): 15' Diameter (Inches): 2" Box Dimensions: 3"H x 6"W x 8"L WT: 2.6 lbs UPC: 079111137585

Read more less

BoatBuckle® G2 Retractable Bow Tie-DownQuantity: 1Dimensions: 2"-43"Break Strength: 2,500 lbs.Safe Work Load: 833 lbsIntroducing another industry first... the BoatBuckle® G2 Bow Tie-Down, the only automatically retractable ratcheting tie-down in its category!This system was designed with three-point trailer tie-down safety in mind and should always be used in conjunction with a good winch strap,along with a transom or gunwale tie-down. Specifications: Length (Feet): 43" Diameter (Inches): 2" Box Dimensions: 3"H x 6"W x 13"L WT: 2.7 lbs UPC: 079111142206 Quick Guide (pdf)

Read more less

Single-Speed Trailer Winch - 900lbs - 12' Strap - 7" HandleSingle-Speed Winch For Use with Load Rite Elite Series and 5-Starr Personal Watercraft Trailers. 900 lbs Capacity.Includes: 12' Long Winch Strap 7″ Winch Handle with Locknut

Read more less

Single-Speed Trailer Winch - 1100lbs - 20' Strap - 7" HandleSingle-Speed Winch For Use with Load Rite Elite Series and 5-Star Personal Watercraft Trailers. 1100lbs Capacity Winch. Breaking Strength on Black Strap: 2,600 pounds.Includes: 20′ Winch Strap 7" Handle with Locknut

Read more less

Two-Speed Trailer Winch - 3200lbs - 25' Strap - 8" HandleTwo-Speed Winch Assembly For Use with Load Rite Elite Series and 5-Starr Model Trailers. 3,200lbs Capacity. Breaking Strength: 4,800 pounds.Includes: 25' Long Winch Strap 8″ Quick Release Handle

Read more less

Knott Disc Brake Caliper with Brake Pads - Right SideFeatures: Caliper MUST Be Mounted in the Correct Position to Allow For Proper Bleeding of the System. Install with Bleeder Valve in “Up” Position. Fits 10″ Autoflex Knott Disc Braking Assemblies

Read more less

Zinc Plated Steel Receiver Pin with Clip The corrosion resistant zinc plated steel receiver pin ensures your ball mount or other hitch-mounted accessories stays securely engaged to your trailer hitch. Hitch pin clip included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plate Bent Bunk Galvanized Mounting BracketC.E. Smith heavy-duty zinc-plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set the proper angle. Bracket is 3/16" thick x 3" wide.

Read more less

12v Electric Trailer WinchModel 915 12V power-in/power-out allows you to control your boat as it is lowered into the water. The 915 comes complete with a 10' remote control cord and switch. It also features a pulley block for double-line applications, emergency hand crank and a 60 amp standard wiring harness. Max. boat length: 29' Max. boat weight: 9500 lbs Vertical lift capacity of 3200 lbs, double line capacity of 7500 lbs. (not to be used as a hoist) Power-in/power-out control Line speed 10 FPM 12 volt operating power 10' remote control cord and switch 40' x 7/32" cable Manual hand crank Pulley block for double-line applications 60 amp standard wiring harness Specifications: Pull Strength (lbs): 3200 lbs Manual/Electric: Electric Gear Ratio: 450:1 Box Dimensions: 9"H x 11"W x 15"L WT: 38.9 lbs UPC: 810123840120 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

75" Post Guide-onThese extra tall Post Guide-Ons allow you to see the location of your trailer when it's under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Fits on I-beams up to 4" wide with provided hardware. Features: Mounting hardware included Sold in pairs Adjusts out to 19" on each side Fits frames up to 3"W x 5-1/4" H 1-1/2" square, 16 gauge pre-galvanized steel uprights, 36" high 2-3/8" diameter white PVC posts WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

4" Bow Bell Roller Assembly - Yellow TPRProduct DescriptionDurable Thermal Plasticized Rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Yellow TPR 5-1/2" Diameter 8" wide 1/2" shaft Fits 4" wide center roller bracket

Read more less

4" Bow Bell Roller Assembly - Black TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Black TPR 5-1/2" diameter 8" Wide 1/2" shaft Fits 4" wide center roller bracket

Read more less

PWC DollyGreat for storage or maintance. This heavy-duty dolly is constructed with a strong galvanized tubular frame. Four rugged casters make it easy to move your PWC, jon boat, or inflatable. Two 4' carpeted bunks tilt and adjust to 12", 16", or 20" widths. Supports up to 1,000 lbs. Comes with hardware and assembly instructions. 34" W x 48" L x 19" H." WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lift Capacity: 1000 lbs Operation Method: Manual Box Dimensions: 4"H x 17"W x 49"L WT: 53.6 lbs UPC: 768296003241

Read more less

2,500 lb Drop Leg Trailer JackThe C.E. Smith Drop Leg 2,500 lb Trailer Jack is a great option if you have an old drop leg jack that just isn't working like it used to. Replace it with this quality and affordable jack.

Read more less

Bow Stop 8.25" Strap Galvanized Mounting BracketC.E. Smith heavy-duty galvanized strap mounting bracket bolts to the cross member on trailers to support the bow stop.

Read more less

Strap Bent Channel Upright Short Galvanized Bracket - 9"Specifications: 9" Upright Short Galvinized Bent Channel

Read more less

Outboard Motor Dolly - 250lb. - RedMade from 14 gauge powder coated steel with a weather resistant synthetic wood mounting block this outbord motor dolly makes it easy to transport and hold your motor weighing up to 250 lbs. 8” wheels and 4" casters with an overall height of 45”, enough to fit a long shaft outboard motor. This outboard motor dolly folds flat to easy storage when not in use. Some assembly required.

Read more less

Double U-Bolt Bolster Bracket - 8-3/4"Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are 1/2” wide spaced 1-3/4” apart with a top hole diameter of 1/2”.

Read more less

60" Post Guide-On With I-Beam Mounting KitProduct DescriptionThese Post Guide-Ons allow you to see the location of your trailer when it's under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame.Features: Mounting hardware included Adjusts out to 19" each side 1-1/2" square. 16 gauge pre-galvanized steel uprights 2-3/8" diameter white PVC posts Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized  The galvanized coating is very thin (0.45 oz. on each side) *Sold in pairsWARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Kwik-Lok Transom Tie-Downs2.0" x 4.0'The Stainless Steel tie-downs offer BoatBuckle quality stainless steel components, right down to the rivets and springs. These quality, Kwik-Lok buckle tie-downs feature protective web pad to keep buckle hardware from coming in contact with boat surfaces. Features: Break Strength 1,000lbs/ea SWL 333lbs/ea Specifications: Length (Feet): 4' Diameter (Inches): 2" Box Dimensions: 2"H x 6"W x 8"L WT: 1.8 lbs UPC: 079111120662

Read more less

CargoBuckle Mini G3 Retractable Ratchet Tie-DownThe CargoBuckle Mini G3 retractable ratchet tie-down system takes the hassle out of securing gear. Six feet of one inch webbing enables you to tie down more equipment in more applications, conveniently and securely. Just hook, ratchet, and go!The CargoBuckle Mini G3 can be permanently mounted with one bolt on a trailer, toy hauler, rack, lift, truck, ladder rack, and in various other applicationsIf permanent mounting is not desired, the CargoBuckle Mini G3 can be used in conjunction with one of several optional adapters to enable mobility. Permanent one-bolt installation Six-foot reach, self-retracting web Anti-corrosive construction One-inch high quality, polyester web Dual safety lock security Specifications: Length (Feet): 6' Diameter (Inches): 1" Box Dimensions: 3"H x 8"W x 12"L WT: 3.35 lbs UPC: 079111037458 Quick Guide (pdf)

Read more less

Heavy-Duty Transom Tie-DownsQuantity: 2Dimensions: 2" x 6'Break Strength: 2,500 lbs./eaSafe Work Load: 833 lbsWhen you need maximum torque and strength,look to our Heavy-Duty line of tie-downs.Features include 5,500 lb. polyester webbing,vinyl-coated top hook and protective pad. Our Heavy-Duty Ratchet is great for those times when you need a little extra holding power.The Heavy Duty Locking tie-down provides added safety and security Specifications: Length (Feet): 6' Diameter (Inches): 2" Box Dimensions: 3"H x 7"W x 9"L WT: 4.1 lbs UPC: 079111142084

Read more less

Winch Cover Kit for RC23, RC30, 712, 912 & 915Protect your trailer winch with a marine-grade black vinyl cover. Water and sun proof to keep your trailer winch looking like new. The Trailer Winch Cover is made to fit the RC23, RC30, 712, 912, and 915 trailer winches.

Read more less

Folding & Pop-Up Camper Winch with 1200lb Lift Capacity The 12 Volt Motorized Folding Camper Winch is used to raise and lower folding campers with the touch of the switch, eliminating hand cranking.Features:  Easier adjusts for lower and upper stops (more precise loading control) Stops at the touch of a switch and can even tuck your camper fabric when lowering Fastest model yet, which makes lifting your folding camper a breeze Simple wiring design that’s easy to install  No grease needed (mess-free use) Better gear system for strong and durable loading Specifications: Lift capacity: (lb) 1200 Unit weight: (lb) 20 Circuit breaker: 40amp  Motor voltage: 12VDC Sold with cable: No Switchplate included: Yes  *Switch is a wired connection  Specifications: Manual/Electric: Electric Box Dimensions: 11"H x 12"W x 15"L WT: 18.2 lbs UPC: 810123843183 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

MareLube TEF45 Max PTFE Heavy Load Lubricant - 16 oz.Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water. Marelube TEF 45 is a highly water-resistant synthetic lubricanat grease containing 45% PTFE. This is the highest percentage PTFE available, which makes TEF 45 perfect for heavy loads and bi-metal anti-corrosion applications like turnbuckles, spar fittings and motor lower units. TEF 45 also works well at protecting against rust corrosion and anti-seize applications. Features: Max PTFE Heavy Load Formulation Highly Water Resistant Bi-metal Corrosion Protection Specifications: Type: Grease Box Dimensions: 4"H x 4"W x 4"L WT: 1.1 lbs UPC: 028026190949

Read more less

Select Series Winch 600lb, 6" Crank Arm - Carbon BlackFully assembled and ready to install. Features: Oversized textured handle - Comfortable, no-slip grip Premium precision gearing - High-efficiency gearing improves pulling capacity with less cranking torque Dual-bolt clamp coupling - Ensures crank arm will not loosen or decouple from pinion spindle Powder-coated, die-cast, aluminum crank arm - Superior leverage Oversized, powder-coated, steel frame - Maximum loading strength and durability Integrated zerk grease fitting - Easy pawl and ratchet gear lubrication  Powder-coated, die-cast, aluminum covers - Durable design resists corrosion, long-lasting Adjustable mounting - Accommodates numerous trailer configurations High-quality, 20' strap - 2” wide, four-panel webbing, polyester strap with forged snap hook Specifications: Weight Capacity (lbs): 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2500 Color: Carbon Black  Finish: Powder-Coated Cover: Plastic  Crank Arm Lengths: 6" or 8" Application: Freshwater Specifications: Gear Ratio: 3.25:1 Manual/Electric: Manual Pull Strength (lbs): 600 Box Dimensions: 6"H x 7"W x 7"L WT: 6 lbs UPC: 810123842728 Quick Guide (pdf)Owner's Manual (pdf)

Read more less