Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top.*Comes with no mount, enabling you to choose whichever mount suits your needs separately.

Read more less

A/M-24 Automatic/Manual Inflatable PFD Life Jacket - GreenThe Onyx A/M 24 Automatic/Manual Inflatable Life Jacket converts from automatic/manual to manual-only inflation. Features: Automatic activation with a manual backup (pull-cord and oral inflator) Convertible from automatic/manual to manual only inflation Low profile design keeps you cool in warm weather Soft extended neoprene neckline for all day comfort Reflective material for increased visibility Supplied with owner's manual and "Think Safe" booklet D-ring attachment for small accessories Use A/M-24 Rearming Kit (#1352) Technical Specifications: Protective cover uses 200 denier nylon ripstop and 200 denier nylon oxford Chest Size - 30"-52" *U.S. Coast Guard approved Type V life jacket with Type III performance Specifications: Color: Green Inflatable: Yes Size: Universal USCG Approved: Yes Box Dimensions: 3"H x 12"W x 19"L WT: 1.25 lbs UPC: 043311961455

Read more less

Drink HolderDrink holder with bulkhead/gunnel mount and rod holder post mountFor cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

242 Rail Mount Adapter - 7/8"-1" - BlackFits 7/8" and 1" diameter round rail, and 1" square rail. For all Scotty post mount rod holders. Works with No. 241 side/deck mounts (not included). Includes: Stainless Steel FastenersWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Scotty's most popular value priced, positive locking, open style rod holder. It's universal cradle holds almost any reel style and has a front locking ring to prevent rod loss when travelling. Manufactured with fibre reinforced engineering grade nylon, the Powerlock offers strength, resilience and reliability. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

Slip DiscsThe Scotty Slip Discs allow you to make micro adjustments to your rod holder or any of our Scotty Rod Holder Height Extenders. These discs when placed between the rod holder post and Scotty Rod Holder, allow you to obtain infinite adjustment angles. Now you can adjust your rod holder to that perfect fish fighting position!WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

244 Flush Deck MountWith splash coverFor all Scotty post mount rod holdersDimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Navilight 360° 2NM White w/Navimount Base & Rail Mount - White Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.Features: 360° All-round/Anchor light with 15 hour burn time 225° Masthead light with 24 hour burn time 135° Sternlight with 32 hour burn time Safety/Flashing light with 85 hour burn time Cabin/Courtesy light with 72 hour burn time Navimount RAIL Mount - White The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications: Mounting Style: Flush Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs UPC: 022697050144

Read more less

Kayak Recreational Footbrace with Rudder ControlThis Kayak Recreational Footbrace with Rudder Control includes the addition of a channeled track to slide in, adding rudder control functionality to Sea Dog’s standard Recreational Footbrace.Features: Measures 14-1/2 inches apart Proudly constructed in the USA of injection-molded polypropylene and glass-filled nylon Specifications: Track Type: Standard Weight: 1.55 lbs Fastener Size: 1/4 in. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Kayak Adjustable Footbrace with Rudder ControlSea-Dog's Kayak Adjustable Footbrace with Rudder Control offers the same great benefits as its fixed counterpart, with the added benefit of rudder control capabilities. One of the easiest footbraces to adjust while on the water. Features: Measures 14-1/2 inches apart Proudly constructed in the USA of injection-molded polypropylene and glass-filled nylon Specifications: Rod Color: Black Weight: 2.0 lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

259Rod Holder Height ExtenderIncrease your odds with easier access to your rod and reel. Extends the height of the rod holder by 6-1/2", allowing for faster access when that fish strikes. Made from super tough re-enforced nylon. Works with Scotty post mount rod holders (except No. 240 Striker)

Read more less

Swivel post bracket works with Scotty optional rod holder mounts.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

0131 Camera Boom with Ball Joint & 0241 MountThis camera boom is Compatible with GoPro and other action cameras.Features: Dual ball joints provide infinite flexibility for positioning Easy Grip T knobs on the base and where the camera mounts Adjustable slip discs Lightweight, buoyant carbon fiber tubes Includes 241 Side Deck Mount Specifications: Height: 29 in. or 56 in.

Read more less

Rudder Cable KitThis kit includes (2) 15' sections of 1/16" rudder cable, (4) thimbles, and (4) swedges.Features:Constructed of 304 stainless steelSpecifications: Cable Size: 1/16 in. Length: 15 ft. Color: Steel Weight: 0.25 lb. Specifications: Type: Cables Box Dimensions: 1"H x 8"W x 9"L WT: 0.3 lbs UPC: 035514748124 Brochure (pdf)

Read more less

Rudder Cable Tubing KitThis kit includes (2) 15' sections of 3/16" rudder cable tubing and (10) 3/16" UL cable clamps.Features:Proudly constructed in the USA of nylonSpecifications: Tubing Size: 3/16 in. Length: 15 ft. Inner Diameter: 5/32 in. Color: Black Weight: 0.20 lb. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 9"L WT: 0.25 lbs UPC: 035514748131 Brochure (pdf)

Read more less

RescueME PLB1 Personal Locator Beacon with 7-Year Battery Storage LifeWherever you are, at sea, on land, the rescueME PLB1 provides the reassurance that global emergency services can be alerted by the press of a button. The rescueMe PLB1 can be operated with a single hand in even the most challenging situations. A simple spring loaded flap covers the activation button preventing inadvertent use. RescueME-PLB PLB1 works with the only officiall recognised worldwide dedicated search and rescue satellite network (operated by Cospas Sarsat). As this is funded by governments there are NO CHARGES to use this service. When activated the rescueME PLB1 transmits your position and your ID to a Rescue Coordination Center via satellite link. Rescue services nearest to your are promptly notified of your emergency and regularly advised of your current location to assist prompt rescue.Features: 30% smaller by volume Easily fits in lifejacket Retractable antenna 7 year battery life 7 year warranty Typical Performance of 24+ hours Non-Hazmat Battery WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Activation Method: Manual Battery Replacement (Years): 7 Years Built-In Strobe: Yes Floats: Yes Frequency: 406 MHz Operational Life (Hours): 24+ Hours Box Dimensions: 2"H x 5"W x 7"L WT: 0.5 lbs UPC: 5060266110344

Read more less

Angled SUP ArmsDesigned specifically for use with any of Magma’s storage rack systems and angled to maximize space. These arms are perfect for storing SUP’s or other water sports boards.  Constructed with 1 in. (25.4 mm) Dia. 304 Marine Grade Mirror Polished Stainless Steel tubing and include Stainless Steel installation fasteners.  Each arm has a tie-down point for securing boards while the pre-installed UV resistant foam padding with heavy duty UV resistant 600D Polyester protective covers help protect them.Compatible With:Magma R10-1003-64 and R10-1002-64 racksFeatures: Includes UV Resistant Polyethylene Foam Pads SUP Arms are angled/bent to hold your SUP safely in place Technical Specifications: Material - 304 Marine grade Stainless Steel  Dimensions (L x W x H) - 20-5/8" x 2-1/4" x 12-3/4" (52.4 x 5.7 x 32.4 cm) Weight - 5.6 lbs (2.55 kg) *Sold as a Pair

Read more less

Floor/Dock Basic Upright Rack System No more lugging around your heavy kayak or paddleboard after a long day on the water.  With Magma’s Kayak/SUP Dock Storage Rack System your problems are solved. Building the rack system is simple; start with the base rack, R10-1001, and purchase the specific arms separately that best fit your needs.  Fully assembled this rack holds up to 4 Kayaks and 5 SUP’s or any combination of both whichever best suites your needs. The finely crafted rack is designed to be mounted directly to any dock or flat surface.  Constructed with 1-1/2” Dia. 304 Mirror Polished Marine Grade Stainless Steel tubing, each vertical uprights has (30) adjustment holes spaced 2” apart for maximum storage capacity.  Base rack and all arms include pre-installed UV resistant polyethylene foam pads, and Stainless Steel mounting/attachment fasteners.  Each arm has a stainless steel tie-down point allowing use of securing straps when equipment is stored or simply use a cable lock to safely secure items in the rack.  Whether you’re new to water sports or a seasoned veteran this rack system is a must have for every water activity enthusiast. Features: Can be mounted on dock or any flat surface Stainless Steel tie-down points to secure all water toys Base Rack include UV resistant Polyethylene foam pads Absolutely the best way to store your water toys Technical Specifications: Material - 304 Mirror Polished Marine Grade Stainless Steel Dimensions (L x H) - 33-5/8" x 64-1/8" (85.5 x 162.9 cm) Weight - 33 lbs (14.97 kg) *Sold as an Individual  Owner's Manual (pdf)

Read more less

MoveVent Dynamic Paddle Sports Life Vest - M/LThe Onyx MoveVent is a vest that conforms to your body like a glove, yet its innovative vented channels help keep you cool while paddling. The mesh ventilation is featured in the front and back of the MoveVent series jackets to allow for maximum airflow.Features: Soft, lightweight flotation foam SOLAS grade reflective material for visibility Expandable zippered pocket with mesh drainage Lash tab for small accessories Drying loop on back Attached whistle for safety Provides excellent mobility for recreational paddle sports (canoe, kayak, SUP) Ventilation in front and back to keep you cool Mesh in lower back fits high back seats and sit-on-top kayaks Sculpted and flexible design conforms to you and stays in place Shoulder adjustments with neoprene comfort pads Adjustable side belts Strong, durable zipper closure Zip assist loop at zipper base Technical Specifications: Chest Size- 36"-44" Weight - 90lbs and over Material - 200 denier nylon ripstop and nylon oxford * U.S. Coast Guard Approved Type III Life Jacket / Personal Flotation Device (PFD) Specifications: Color: Orange/Grey Inflatable: No Size: M/L USCG Approved: Yes Box Dimensions: 4"H x 18"W x 21"L WT: 1.3 lbs UPC: 043311040419 Brochure (pdf)

Read more less

0139 Phone Holder with Post, Track & Rail MountsThis Scotty phone holder is made with engineering-grade nylon and has an opening for charging the charging device.Features: Dual ball joints provide infinite flexibility for positioning Easy Grip T knob Stainless steel hardware The snob allows for width adjustments, securing devices between 2-3/4 in. and 3-3/4 in. wide Post mount that fits all Scotty post-mounting options Track mount option included Rail Mount option included (fits 7/8 – 1-1/4 in. rails)

Read more less

441 Backing Plate f/241 & 244 MountUse the Scotty Backing Plate to add structural support when attaching the Scotty 241L / 241 Combination Side / Deck Mount or the Scotty 244L / 244 Flush Deck Mount to thin-walled watercraft. Made with super tough, rugged engineering grade nylon. *Stainless steel nuts & machine screws included.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

141 Kayak/SUP Transducer Mounting Arm w/438 Gear-HeadKayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty the 141 Track Adapter Mount that will allow you to install one of the Scotty Fishfinder mounts.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Offset GearsThe Scotty Offset Gear doubles your rod holder positions for ultimate versatility. Simply place a gear between the rod holder post and your Scotty Rod Holder, adjusting your desired angle of the rod holder before fastening the bolt tight. Now you can adjust your rod holder to that perfect fish fighting position!

Read more less

Gear-Head Track AdapterThe Scotty 438 Gear-Head Track Adapter quickly slides into place and locks down your post mounted Scotty rod holders and accessories. Similar to the revolutionary Scotty 428 Gear-Head, this system allows you to quickly change rod holder positions with a simple "twist". You can use your favorite, fully adjustable Scotty rod holder and adjust it to any vertical or horizontal position without having to drill permanent mounting holes. Designed to fit all kayak track systems, this compact product is a must for serious kayak anglers.*Track NOT Included

Read more less

Gear Head Mount #428Quick and easy, drop and lock system that allows you to secrure and re-position your rod holder with just a twist.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Fly Rod Holder267The Fly Rod Holder combined with adjustable wrap-around straps and quick-release clips to use with your float tube or pontoon boatInnovative compact design allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap. Even works well with "short butt" fly rodsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Triple Rod HoldersScotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.Includes 3 No. 230 Power Lock rod holdersWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Universal Grab Handle w/Comfort Grip - BlackFlexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and companionway. Constructed from soft polypropylene webbing over a semi-rigid core. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might come in contact with them. They meet the ABYC H-41 standard for strength: "withstand a load of 400lbs in any direction." All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.

Read more less

Universal Fit Kayak Cockpit CoverKeep water and debris out of the kayak while in storage or when on shore with Attwood's universal fit cockpit cover made with polyurethane-coated 210 denier nylon. It has dual side adjustability and PVC-sealed seams. Features: Universal fit Color: Black Keeps water out Dual side adjustment for customized fit Fits cockpits up to 40" long x 22" wide Included:Mesh Storage Bag

Read more less

Kayak Car-Top Carrier KitPart #: 11438-7A simple, convenient kit for carrying a kayak on car top. Includes two supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Airspan Breeze Life Jacket - XS/SM - BlueThe minimal design of the Onyx AirSpan Breeze life jacket provides hours of comfort for the paddler, allowing them to move their arms with ease due to the low-profile front foam, sculpted upper back foam, and large armholes.A key feature of this vest is the AirSpan technology located on the vest's back. When the side webbing straps are adjusted to a snug fit, the inner mesh panel expands and an air gap between your back and the foam is formed. This allows for added breathability and airflow to keep you cool when paddling on those warmer weather days on the water. The six adjustment points let you create a customized, secure fit.The AirSpan Breeze has two large pockets with stretchable Airprene panels to store necessary gear and allow for drainage.  The reflective material on the front and back, along with a loop on the back for a light attachment, provide increased visibility. Features: As you tighten the body straps, the inner mesh panel expands, providing airflow to your back and keeping you cooler while paddling and fishing Low profile front foam and sculpted upper back allows full range of motion Thin back foam accommodates most canoe and kayak seats  Shoulder adjustments with airprene comfort pads & shoulder webbing tuck away Two large pockets with stretchable airprene panels accommodate necessary gear and allow drainage Certifications:U.S. Coast Guard approved and Transport Canada approvedTechnical Specifications: Color - Blue Size - XS/SM  *Sold as an individual Specifications: Color: Blue Inflatable: No Size: XS/S USCG Approved: Yes Box Dimensions: 4"H x 16"W x 19"L WT: 0.7 lbs UPC: 043311980593

Read more less

Battery Navigation Light Requires 4 AA batteries (not included) Molded one piece body construction Shock resistant neoprene accents Incandescent or LED available Rated at 100,000 hours LED service life LED uses 90% less energy than incandescent Sealed heavy duty on/off switch Insert molded brass threaded mounting bushings Removable lamp carriage assembly 6.18" x 2.53" Mounting Style: Suction Cup WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: Red/Green Housing: White Voltage - Input Range (Volts): 4 AA Batteries (Not Included) LED: Yes Box Dimensions: 3"H x 7"W x 12"L WT: 0.7 lbs UPC: 601373563071

Read more less

Navilight Tricolor 2NM with Scotty BaseNavilight Tricolor Scotty 2NM - US Coast Guard approved for 2 nautical miles is fully compatible with the Scotty Deck Mounting system and includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof and floats.The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5 degrees. The white Sternlight shows an unbroken light over an arc of the horizon of 135 degrees. All lights work independently, in a combination of all three or red/green together.Examples of usage, based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs.On a power-driven vessel of 12 meters or more in length but less than 50 meters in length: As green or red sidelight As sternlight On a power-driven vessel of less than 12 meters in length: As green or red sidelight As combined green/red As sternlight On a sailing vessel underway: As green or red sidelight As sternlight On a sailing vessel of less than 20 meters in lengths as backup light:TriColor lantern at or near the top of the mastSpecifications: USCG Approval, 2 Nautical Miles 5 Modes: Tricolor Masthead light (135° white, 112,5° red, 112,5° green), BiColor side light, red side light, green side light, white Sternlight Floatable, waterproof (20 m) and air-tight For use with Scotty Flush Deck Mounting system Powered by three AAA batteries (not included) Size: H = 85 mm, O = 68 mm Weight (net): 91 g Modes/Approximate Burn Time 16 green/red/white LED, 360° Tricolor lantern/12hrs 10 green/red LED, 225° Bi-Color sidelight/20hrs 5 green or 5 red LED, 112,5° sidelight/38hrs 6 white LED, 135° Sternlight/32hrs Mounting System:The Navilight Tricolor Scotty is designed to fit into the Scotty Deck Mounting system (Side/Deck Mounts, Flush Mounts) and requires no additional adapters.  Specifications: LED: Yes Housing: Black Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) Visible Range (Miles): 2nm Lens Color: White/Red/Green Box Dimensions: 4"H x 4"W x 7"L WT: 0.3 lbs UPC: 814154018817

Read more less

12" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 12 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.11 lb. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.1 lbs UPC: 035514432740 Brochure (pdf)

Read more less

Gator Patch 6" x 9" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Kayak Hatch Cover - VCP OvalThe VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal.This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim.*Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products.Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 17-1/4 in. Style: Performance  Weight: 1.30 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 3"H x 14"W x 19"L WT: 1.85 lbs UPC: 035514745161 Quick Guide (pdf)

Read more less

Gimbal Mount AdapterThe Scotty Gimbal Mount Adapter has a quick and easy drop and lock system transforming the existing Gimbal Mount on your watercraft into a fully adjustable mounting point for post mounted Scotty rod holders and accessories. Complete with the revolutionary Scotty 428 Gear-Head, this system allows you to quickly change rod holder positions with a simple "twist". You can use your favorite, fully adjustable Scotty rod holder and adjust it to any vertical or horizontal position without having to drill permanent mounting holes.Light weight, yet incredibly strong, the 453 Gimbal Mount Adapter is manufactured with engineering grade composite materials.

Read more less

PFD 2001 Adult Boat Universal Blue Display for Adults Over 90lbs - Chest Size Of 50"The blue adult universal classic life vest is Coast Guard-approved for general boating. This classic series life jacket is made of nylon and PE foam and features three buckles and open sides.Specifications: Adults Over 90lbs Chest Size Of 50" Color: Blue

Read more less

Classic Infant Life Jacket - Up to 30lbs - BlueThe littlest ones in the family can enjoy the water too in a Stearns Infant Classic Series Vest. It's specially fitted for children under 30 lbs. (13.6 kg), with an extra contoured float above the neck - like a pillow - to encourage face-up flotation. A rescue handle allows adults to easily move the child from the water or the boat. Bright material makes quick work of spotting the child. A zippered front, adjustable chest strap, and crotch strap ensure a tight fit at the pool, beach or lake. Durable nylon construction and PE flotation foam, along with 1-in. (2.54 cm) webbed straps, will allow you to use the Coast Guard-approved Type II vest season after season. Great for a day on the boat or beach and in the pool or lake.Features: Coast Guard-approved Great for a day on the boat or beach and in the pool or lake Neck float encourages face-up flotation Bright color for high visibility For infants under 30 lbs. (13.6 kg) Durable construction: Nylon shell, PE foam, zippered front, and two 1" (2.54 cm) webbed straps A rescue handle allows adults to move the child from the water or the boat

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 0 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3 lbs UPC: 835719003673

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 30 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003710

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 15 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 8858541005686 Brochure (pdf)

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 30 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003772

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 0 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 835719003734 Brochure (pdf)

Read more less

Classic Series Child Vest Life Jacket - 30-50lbs - RedWhether they're on a boat, a tube, water skis, or a personal watercraft, your children will have a blast in Stearns® Child Classic Series Vests. They're specially fitted for children 30-50 lbs. The Coast Guard-approved life jacket is designed with open sides, three adjustable chest belts, and a crotch strap for a tight fit and better movement. Durable nylon construction and PE flotation foam, along with 1" (2.54 cm) webbed straps will allow you to use this vest season after season.Features: Child's General Boating Life Vest with adjustable leg strap Designed to match adult boating vest (model 2001) Acceptable for personal watercraft or waterskiing Buoyancy for children weighing 30 - 50 pounds 1" webbing on child's life jackets 3 buckles for redundant safety on children's lifejackets Open-sided water vests Water safety equipment from Stearns, the leader in PFDs with over 50 years of experience Get your children used to safety in the water at a young age by wearing lifejackets Comfortable, lifevests made from durable nylon United States Coast Guard approved lifejackets Made in China

Read more less