Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holdersFits 7/8" round rails.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: Black Box Dimensions: 5"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002360

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Scotty's most popular value priced, positive locking, open style rod holder. It's universal cradle holds almost any reel style and has a front locking ring to prevent rod loss when travelling. Manufactured with fibre reinforced engineering grade nylon, the Powerlock offers strength, resilience and reliability. Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

259Rod Holder Height ExtenderIncrease your odds with easier access to your rod and reel. Extends the height of the rod holder by 6-1/2", allowing for faster access when that fish strikes. Made from super tough re-enforced nylon. Works with Scotty post mount rod holders (except No. 240 Striker)

Read more less

244 Flush Deck MountWith splash coverFor all Scotty post mount rod holdersDimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2.05 lbs UPC: 096811530720

Read more less

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications: Mounting Style: Flush Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs UPC: 022697050144

Read more less

RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811516526

Read more less

NEW - Innovative Trolling System Puts You In ControlNo matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.Adjustable Rod HolderDual AxisExperience 360° of rotation at the push of a button with this 10" holder. It features six up and down locking positions, a pistol grip release for quick, one-handed angle changes and a ratcheting adjustment system that allows you to quickly position the holder vertically. Includes a UV-resistant end cap to protect rod and reelWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Finish: Polished Box Dimensions: 4"H x 5"W x 17"L WT: 3 lbs UPC: 029402032129 Owner's Manual (pdf)

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-525SS/XS Medium 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512511

Read more less

King Fish Rod Holder - WhiteBolt-on king fish rod holder. It is designed to be mounted under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

Elite Screwless Stainless Steel 0° Rod & Cup Holder - Drain - Round Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Round Top 0º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.6 lbs UPC: 857515002186 Quick Guide (pdf)

Read more less

Flush Mount Rod Holder - 15 Degree with Drain - Black Liner - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter Fits 2-3/16” Hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole The liner runs the full length of the tube

Read more less

290 R-5 Universal Rod Holder w/MountThe R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.  The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 rod holder 241 Side deck mount *Sold as an Individual Quick Guide (pdf)Brochure (pdf)

Read more less

253Gimbal MountAllows the use of Scotty rod holders with factory installed flush mounted rod holders.Fits 9" x 1-1/2" flush mountsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

254MMINI Rod HOlder Height ExtenderThe "Mini Extender" allows you to lift your Scotty Rod Holder off the deck, allowing full movement and versatility. The "Mini Extender" works perfectly to eliminate the possibility of your rod interfering with an inconvenient rail position or other obstruction. For use with all Scotty Post mount rod holders. Extends the height of a rod holder by 4-1/4"

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish - 3/8" Coped BladeTaco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. Specially formulated, fungal-resistant PVC liners are tapered to fit snugly with flared rod holder design. Taco Marine Rod Holders with flared design allow for easy rod placement. Welded I-Beam pin construction seats rod butt securely in place and is proven to be 2-1/2 times stronger than competitive rod holders.Features: Brite Anodized Aluminum Ideal for welding to towers, t-tops, radar arches, railings, and leaning posts Flared style with 3/8" Coped Blade Welded I-Beam securely seats rod butt Includes form-fitted PVC anti-fungal white liner Three year limited warranty Made in USA This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Aluminum Finish: Silver Box Dimensions: 3"H x 4"W x 10"L WT: 1.2 lbs UPC: 630838028855

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 15° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Flush Angle: 15 Degrees Finish: Polished Box Dimensions: 5"H x 5"W x 14"L WT: 2.2 lbs UPC: 768296005221

Read more less

536810S - Flush Mount Rod Holder - 15 Degree - Swivel - 10.5" DeepThe larger 80 series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Silver Length (Inches): 10.5" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 3.25 lbs

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 0° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 1-5/8" Length (Inches): 9" Mounting Style: Flush Angle: 0 Degrees Finish: Polished Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 2.1 lbs UPC: 768296005207

Read more less

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 3-5/9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.45 lbs UPC: 035514325042

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513013

Read more less

Swivel Base Rod HoldersRH579Half Angle 15° Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.1 lbs UPC: 096811517905

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. PipeColor: BlackPipe Size: #3Fits: 1.660" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 10"W x 12"L WT: 1.6 lbs UPC: 096811500334 Quick Guide (pdf)

Read more less

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:WhitePipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811520554

Read more less

Flush Mount Rod HolderRH-525SS Medium 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 14"L WT: 1.8 lbs UPC: 096811512504

Read more less

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"

Read more less

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom. Main features: Heavy Duty Stainless Steel Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Comes with no mount, enabling you to choose whichever mount suits your needs seperately. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

ORCA Rod HolderThe fastest rod release on any holder on the marketFibre reinforced engineering nylon, offers strength, resilience and reliabilityCompletely adjustable to multiple vertical and horizontal positions400 ORCA Rod Holder with 241L LOCKING push button combination side/deck mount

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.35 lbs UPC: 062017012308

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 231Power Lock Rod Holder with No. 244 Flush Deck MountWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.3 lbs UPC: 062017002316

Read more less

StrikerDesigned for Muskie, Halibut, Sturgeon and other big game fish. Stainless steel reinforced post, larger opening with easy lock / unlock ring. The inner support rotates with the rod to instantly remove and "strike" simultaneously. Complete with No. 241 combination deck / side mount.240Striker Rod Holder with No. 241 combination deck or side mountWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

5 Rod ClusterFeatures a 30° bent butt, welded gimbal pins, anodized aluminum finish, handcrafted in the USA at a fraction of competitors prices plus easily stores 5 rods from any one rod holder.

Read more less

Double Rod Holder Part #: 105 The double rod holder, with its bent butt and angled rod holders, plus solid weld contruction from 60 series aluminum, gives the fisherman the opportunity to fish two lines from one holder.

Read more less

GS Trident Rod Holder - Bent Butt - Polished AluminumFeatures: Smaller, more compact than our original Triple Kite Rods  Used for one kite rod and two additional rods to increase your rod storage capacity and keep them up and out of the way Constructed of cold drawn anodized aluminum

Read more less

Stainless Steel 15° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002070

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.2 lbs UPC: 857515002001 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Drain - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.6 lbs UPC: 857515002025 Quick Guide (pdf)

Read more less

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 1.9 lbs UPC: 768296011307 Quick Guide (pdf)

Read more less

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability. Polished 316 grade stainless steel tube for corrosion-resistance Gasket Provides water seal around flange Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use U.V. resistant polymer liner protects finish on rod or reel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Length (Inches): 7-1/2" Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs UPC: 022697663641

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series30°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Finish: Polished Diameter (Inches): 1-7/8" Construction: Stainless Steel Angle: 30 Degrees Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3.2 lbs UPC: 768296006044

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 0° LENGTH: 10-1/2" I.D.: 1-7/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Mounting Style: Flush Box Dimensions: 6"H x 6"W x 16"L WT: 3.1 lbs UPC: 768296005559

Read more less

Swivel Base Rod HoldersRH575Standard Angle 30°Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 3.1 lbs UPC: 096811517509

Read more less

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 11-11/16" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 0.25 lbs UPC: 035514325158

Read more less

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.Specifications: Angle: 5-degrees Stem Length: 4 inches with wing nut Use for: Horizontal rod position Includes: 5071 mounting base Specifications: Construction: Stainless Steel Length (Inches): 4" Box Dimensions: 3"H x 7"W x 10"L WT: 0.7 lbs UPC: 022697506030 Quick Guide (pdf)

Read more less