XD Series Single 500 Amp Heavy Duty Battery Switch/Mechanical ContactorFeatures: Silver Alloy Contact Points support high ampere/full voltage switching capability versus legacy rotary style switches. Expandable: Integrate the 8700 XD Battery Disconnect easily with XD Series FLEX/ACR/LVD relays via using optional 8790 Link and 8791 Cross Link Busbars bars for easy integration with other Single, Dual or Triple Circuit XD relays. Terminal Stud Protection: Included protective cover with convenient label recesses ensures no accidental shorts occur and allows for easy identification of circuits long term. Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware.  Intuitive Manual Control: Bright yellow knob and intuitively easy-to-read on/off label simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state. Ignition Protected: Safe for installation in gasoline-powered boats and other combustible install environments. Sealed IP67 Construction keeps moisture out and the integrated Gore-Tex pressure regulation vent increases its ability to operate reliably for long-term harsh environment operation.  Compact Case Design allows for easy surface mount or rear panel installs and rectangular shape (narrower than competing products) keeps finding a mounting location easy. Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Terminal Stud Size (mm): M10 Voltage Range (VDC): 8-36 Ingress Protection: IP67/IP6K 9K Contact Materials: Silver Alloy Focal Features:High Visibility KnobForce each individual relay Open or Closed and optionally leave knob in either position to lock relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for included weatherproof label set makes circuit and relay identification easy. Blank labels for custom applications.Protective Cover IncludedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground.Stainless HardwareCorrosion is no issue with quality stainless steel studs and self locking flanged nuts.Smaller FootprintXD Relays offers high Amp rating in a smaller package than competitive solutions, reducing install space requirements to a minimum.Integrated VentHigh quality Gortex vent regulates internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments. Brochure (pdf)

Read more less

Sealink® Dual USB-A/C Combo ChargerThe Marinco Sealink USB-A/C Combo offers total charging flexibility. Compatible with 12V and 24V systems, and delivering up to 45W of total output, the charger charges electronics including cell phones, tablets, headphones & other devices. Mounting in a standard 1 1/8“ hole and featuring electrical tabs for quick wiring, the charger is easy to install. A weather-resistant cover protects against water and dust ingress, making it ideal for challenging environments.Features: Two USB Ports: (1) USB-A and (1) USB-C Mounts in a 1 1/8” hole Water resistant cap LED power indicator Applications: Marine RV Automotive Golf Cars Specialty Vehicles Industrial Equipment Quick Guide (pdf)

Read more less

TILE USB-A/USB-C Interior Charging Socket - 12/24V - Black BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Output (Type A): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

1014 Mounting Bracket f/1011 12V SocketSocket not includedFeatures: Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system - plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Round Red LED Temperature MeterThe temperature meter includes a prewired temperature sensor with a 6-foot cable and it monitors temperature on a bright LED screen. Features: Reverse polarity protected The same compact round size as a standard 12VDC receptacle, this temperature meter supports many installation options Constructed of injection-molded nylon Installation is as easy as drilling a 1-1/8-in. hole, inserting the socket body, tightening the locking nut, and connecting the wires IP67 waterproof rating 12-24VDC Specifications: Diameter: 1-7/16 in. Length: 1-1/16 in. Height: 1-1/8 in. Volts: 12-24 Temperature Range (Fahrenheit): -67 degrees to 248 degrees  Weight: .02 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

VE.Can RJ45 Terminator - Bag of 2This bag contains two VE.Can RJ45 terminators. The terminators are included with some other Victron products, for example, the CANUSB.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Package Qty: Two Box Dimensions: 1"H x 1"W x 11"L WT: 0.1 lbs UPC: 8719076019923 Quick Guide (pdf)

Read more less

EasyView 5Waterproof system monitor with daylight display and intuitive touch control.Controlling your Mastervolt system has never been easier. The EasyView 5 features a sharp, waterproof display which is clearly readable in daylight. Thanks to the color touch screen and multi-language menu, the display is a pleasure to operate. Easily customizable favorite pages show all relevant system information at a glance.Features Water proof, daylight readable color display Intuitive touch control Customizable favorite pages Log book for warnings and alarms Buzzer and Home button Easy mounting: Front mount, wall mount or retrofit MasterBus powered or MasterBus powering by 12 V DC input Easy updating through integrated USB ApplicationsThe EasyView 5 completes any MasterBus system. Applications include yachts, vehicles and stationary systems. Markets include marine, mobile (recreational & professional), infra-structure, offshore, off-grid and industrial markets.Specifications Display: 4.5 inch high contrast display with capacitive touch control. Resolution: 480x272 pixels, Color depth: 16 bits Languages: English, Dutch, German, Spanish, Italian, French, Finnish, Swedish, Norwegian, Danish IP degree: IP65 waterproof front Power supply: MasterBus powered or MasterBus powering through 12/24 V input Power Consumption: < 160 mW (idle mode) Alarm: Buzzer integrated Connections: 2 x MasterBus, USB, 12/24 V auto ranging input for optional external power Mounting: Front mount, wall mount and MasterView Easy retrofit Dimensions, HxWxD: 113 x 127 x 43 mm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Relay 12V 150A with ResistorThis is an automotive-rated relay/industry standard drop-in replacement for Tyco/Amp. The relay switch carries high-amp electrical currents in high ambient temperatures/wet environments.Features:Delphi Metripak connector built-in to the enclosure (sealed enclosure)Specifications: Continuous Current @85C (Amps): 180 Intermittent Current @85C (Amps): 240 Minimum Operate Voltage (VDC): 7.2 On-State Current Draw @12V (mA): 325 Release Voltage (VDC): 2.2 Switching Current @13.5 VDC (Amps): 300 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

70A Trolling Motor ReceptacleIncreased amperage for modern trolling motors.Features: 70A continuous rating Sealed, waterproof connection Integrated strain relief Keyed design with thumbprint locator Accepts up to 6AWG wire WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TILE USB-A/USB-C Interior Charging Socket - 12/24V - Stainless Steel BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Output (Type A): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

MasterBus Cable - 0.5M Suitable for data traffic and powering peripheral equipment, this is the only cable you need for your MasterBus network. MasterBus compatible products come standard with two ports, while other equipment requires an interface.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4365 Water Resistant USB Accessory Panel - 15A Circuit Breaker, 12V Socket, 2x 2.1A Dual USB ChargersEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

Universal DC Cable Extender - 5'Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Carry Case for BlueSmart IP65 Chargers & AccessoriesSmart and professional; this new snap shut carry case provides protective stowage and easy transport for your Blue Smart IP65 charger, and its accessories.Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options.*Charger and accessories not includedWarranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Chargers Box Dimensions: 4"H x 12"W x 14"L WT: 1.95 lbs UPC: 8719076046554 Quick Guide (pdf)Brochure (pdf)

Read more less

Lanocote Rust & Corrosion Solution - 4 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 3"H x 3"W x 3"L WT: 0.3 lbs UPC: 028026136244

Read more less

Lanocote Rust & Corrosion Solution - 16 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 4"W x 4"L WT: 0.95 lbs UPC: 028026136268

Read more less

DC-DC Converter - 12/36V - 20AYour boat has a 12V alternator, and you need to charge a 24V or 36V battery “on the run”? Dolphin has the solution. Our boosters are true DC/DC chargers with a 3-stage smart charge feature. Compatible with 4 different technologies, including Gel, AGM, or Lithium LIFEPO4. Dolphin booster is the perfect choice to charge your bow thruster or trolling motor batteries!Flexibility & VersatilityBOOSTER units are designed to charge a 24V, 36V, or 48V auxiliary battery from a single 12V or 24V power system, ideal for new installations or for updating older systems. Thanks to recharging during navigation, auxiliary batteries are always available. No need to wait until you’re connected to the shore to recharge. This product range extends from 12/24V (charging at 30A), 12/36V (charging at 20A) up to 24/48V (charging at 15A).Efficient Power ConversionSmall is beautiful: our engineers have made it compact. BOOSTER is only half the size of a conventional charger of equivalent power!Faster Charging TimesBOOSTERS are intelligent marine battery chargers featuring an advanced and unique 4-stage charging program. This reduces charging time by 50% compared with charging from a basic alternator. with different battery chemistry settings (Lead, Gel, AGM, Lithium, LifeFO4).Compatibility with Different VoltagesBOOSTERS are smart battery chargers featuring four different battery profile, Lead, Gel, AGM, and Lithium LifeFO4.Protection FeaturesBOOSTER units include automatic protection against battery source drainage, over-current, over-voltage and reverse polarity and built-in fuses protections.As for all other Dolphin® charger products, the BOOSTER’s assembly process includes conformal coating of the electronic board (PCB) to guarantee an extended lifecycle of your battery charger. Quick Guide (pdf)

Read more less

DC-DC Converter - 24/48V - 15AYour boat has a 12V alternator, and you need to charge a 24V or 36V battery “on the run”? Dolphin has the solution. Our boosters are true DC/DC chargers with a 3-stage smart charge feature. Compatible with 4 different technologies, including Gel, AGM, or Lithium LIFEPO4. Dolphin booster is the perfect choice to charge your bow thruster or trolling motor batteries!Flexibility & VersatilityBOOSTER units are designed to charge a 24V, 36V, or 48V auxiliary battery from a single 12V or 24V power system, ideal for new installations or for updating older systems. Thanks to recharging during navigation, auxiliary batteries are always available. No need to wait until you’re connected to the shore to recharge. This product range extends from 12/24V (charging at 30A), 12/36V (charging at 20A) up to 24/48V (charging at 15A).Efficient Power ConversionSmall is beautiful: our engineers have made it compact. BOOSTER is only half the size of a conventional charger of equivalent power!Faster Charging TimesBOOSTERS are intelligent marine battery chargers featuring an advanced and unique 4-stage charging program. This reduces charging time by 50% compared with charging from a basic alternator. with different battery chemistry settings (Lead, Gel, AGM, Lithium, LifeFO4).Compatibility with Different VoltagesBOOSTERS are smart battery chargers featuring four different battery profile, Lead, Gel, AGM, and Lithium LifeFO4.Protection FeaturesBOOSTER units include automatic protection against battery source drainage, over-current, over-voltage and reverse polarity and built-in fuses protections.As for all other Dolphin® charger products, the BOOSTER’s assembly process includes conformal coating of the electronic board (PCB) to guarantee an extended lifecycle of your battery charger. Quick Guide (pdf)

Read more less

DC-DC Converter - 24/24V - 30AYour boat has a 12V alternator, and you need to charge a 24V or 36V battery “on the run”? Dolphin has the solution. Our boosters are true DC/DC chargers with a 3-stage smart charge feature. Compatible with 4 different technologies, including Gel, AGM, or Lithium LIFEPO4. Dolphin booster is the perfect choice to charge your bow thruster or trolling motor batteries!Flexibility & VersatilityBOOSTER units are designed to charge a 24V, 36V or 48V auxiliary battery from a single 12V or 24V power system, ideal for new installations or for updating older systems. Thanks to recharging during navigation, auxiliary batteries are always available. No need to wait until you’re connected to the shore to recharge. This product range extends from 12/24V (charging at 30A), 12/36V (charging at 20A) up to 24/48V (charging at 15A).Efficient Power ConversionSmall is beautiful: our engineers have made it compact. BOOSTER is only half the size of a conventional charger of equivalent power!Faster Charging TimesBOOSTERS are intelligent marine battery chargers featuring an advanced and unique 4-stage charging program. This reduces charging time by 50% compared with charging from a basic alternator. with different battery chemistry settings (Lead, Gel, AGM, Lithium, LifeFO4).Compatibility with Different VoltagesBOOSTERS are smart battery chargers featuring four different battery profile, Lead, Gel, AGM, and Lithium LifeFO4.Protection FeaturesBOOSTER units include automatic protection against battery source drainage, over-current, over-voltage and reverse polarity and built-in fuses protections.As for all other Dolphin® charger products, the BOOSTER’s assembly process includes conformal coating of the electronic board (PCB) to guarantee an extended lifecycle of your battery charger.

Read more less

DC-DC Converter - 12/24V - 30AYour boat has a 12V alternator, and you need to charge a 24V or 36V battery “on the run”? Dolphin has the solution. Our boosters are true DC/DC chargers with a 3-stage smart charge feature. Compatible with 4 different technologies, including Gel, AGM, or Lithium LIFEPO4. Dolphin booster is the perfect choice to charge your bow thruster or trolling motor batteries!Flexibility & VersatilityBOOSTER units are designed to charge a 24V, 36V or 48V auxiliary battery from a single 12V or 24V power system, ideal for new installations or for updating older systems. Thanks to recharging during navigation, auxiliary batteries are always available. No need to wait until you’re connected to the shore to recharge. This product range extends from 12/24V (charging at 30A), 12/36V (charging at 20A) up to 24/48V (charging at 15A).Efficient Power ConversionSmall is beautiful: our engineers have made it compact. BOOSTER is only half the size of a conventional charger of equivalent power!Faster Charging TimesBOOSTERS are intelligent marine battery chargers featuring an advanced and unique 4-stage charging program. This reduces charging time by 50% compared with charging from a basic alternator. with different battery chemistry settings (Lead, Gel, AGM, Lithium, LifeFO4).Compatibility with Different VoltagesBOOSTERS are smart battery chargers featuring four different battery profile, Lead, Gel, AGM, and Lithium LifeFO4.Protection FeaturesBOOSTER units include automatic protection against battery source drainage, over-current, over-voltage and reverse polarity and built-in fuses protections.As for all other Dolphin® charger products, the BOOSTER’s assembly process includes conformal coating of the electronic board (PCB) to guarantee an extended lifecycle of your battery charger. Quick Guide (pdf)

Read more less

ACS Auto Charger Selector - 12V - 50AOur Automatic Charge Selectors are smart, 100% waterproof (IP67) and compact voltage-sensing relays that automatically manage the charge function between your start and service battery banks. DOLPHIN ACS are the ideal charging-relays for outboard engine boats.SuperSafe (Unique feature)Our cutting-edge “Current Limit Function” is built on MOSFET technology and includes a one-way operating “blocking diode function”: this prevents domestic (house/service) battery voltage drop when starting your engine or bow thruster. Result: no more sensitive electronics damaged onboard (GPS, etc.).ACS is also intrinsically safe against ignition of atmospheric flammable vapours (ISO 8846), which makes it safe for installation on gasoline outboard engine boats.SuperEfficientNo more manual battery selection. No more drained batteries. Our ACS reduces amperage operating current by up to 70% in comparison with other voltage-sensing relays currently on the market. Our ACS is particularly recommended for use with Lithium batteries.100% WaterProofACS products are true Dolphins: they are IP67 certified.Other assets...With ACS, forget manual battery selection. Forget moving parts with a high failure rate. Forget battery voltage drop. Forget drained batteries. And, last but not least, DOLPHIN ACS reduces operating amperage by up to 70% in comparison with other voltage-sensing relays currently on the market.Specifications: System voltage: 12 Volts Current rating: 50 Amp Continuous / 120 Amp Peak, 80 Amp Continuous / 190 Amp Peak ACS units come with a multi-colour LED control and a remote operation switch contact Owner's Manual (pdf)

Read more less

This convenient adapter allows quick thru-hull connections to an AC extension cord - with no cutting or splicing required - using the male AC plug from any of our chargers. The watertight cover and gasket prevent corrosion on the AC plug when it isn't in use.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

70A Trolling Motor PlugIncreased amperage for modern trolling motors.Features: 70A continuous rating Sealed, waterproof connection Integrated strain relief Keyed design with thumbprint locator Accepts up to 6AWG wire WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Heavy Duty Group 27 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Install with #10 fasteners Specifications: Inside Dimensions: 12" L x 6-7/8" W Battery Series: 27/27M Quick Guide (pdf)

Read more less

Solar Starter Cable KitXantrex's Solar Starter Cable Kit provides weather-resistant, certified cables for connecting a solar panel to a charge controller, and from the charge controller to the battery.Features: Designed to connect a PV array to a charge controller and battery Weather-resistant and certified cables PV and battery cables both have built-in ferrule terminations for quick connections to the charge controller Battery cables have built-in fuse and ring terminals In the Box: (1) Pair of (black/red) 20-foot MC4-type PV cables (1) Pair of (black/red) 10-foot MC4-type battery cablesBuilt-in 30A DC ATC fuse on the red cable

Read more less

Trolling Motor Power PlugUse this to add a 70A power plug to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

MareLube TEF45 Max PTFE Heavy Load Lubricant - 4 oz.Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water. Marelube TEF 45 is a highly water-resistant synthetic lubricanat grease containing 45% PTFE. This is the highest percentage PTFE available, which makes TEF 45 perfect for heavy loads and bi-metal anti-corrosion applications like turnbuckles, spar fittings and motor lower units. TEF 45 also works well at protecting against rust corrosion and anti-seize applications. Features: Max PTFE Heavy Load Formulation Highly Water Resistant Bi-metal Corrosion Protection Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 3"L WT: 0.35 lbs UPC: 028026190932

Read more less

12" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 12 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.11 lb. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.1 lbs UPC: 035514432740 Brochure (pdf)

Read more less

Dual XD - NMEA 2000 - Relay/Relay with Knobs - 8 Position DTFeatures: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. 500A continuous / 1600A cranking (per switch) - supports all standard marine electrical systems. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Applications: Seamless NMEA 2000 Integration – Control switches, monitor switch status, and battery voltage. Flexible Control Options – Operate via NMEA 2000 or discrete analog inputs for added versatility. 35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Eliminates Dead Start Batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 8"L WT: 2 lbs UPC: 850067590224

Read more less

USB 3.0 & USB-C Power Socket without LightThis USB 3.0 & USB-C power socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging.Features: A protective dust cap covers the ports when not in use Constructed of injection-molded nylon Easy installation requires drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires USB 3.0 Watts: Non-illuminated IP65 rating CE and RoHS compliant Specifications: Outer Diameter (inch): 1-7/16" Inner Diameter (inch): 1-1/8" Length (inch): 1-1/2 Volts: 8-32 Total Output: 5V/6A USCB-C Watts: 60W @ 24V USB-A Watts: 36W @ 12V Weight: 0.08 lb. Color: Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round Dual USB & USB-C Power SocketUSB & USB-C Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger.Features:  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED illumination  IP65 rating  CE and RoHS compliant Specifications: Output DC: 5V/4.8A  Input 8-32VDC  USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round USB & USB-C Power Socket with Hidden VoltmeterUSB 3.0 & USB-C Power Socket with Voltmeter charges two devices simultaneously while the LED screen displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. Features:  LED volt meter reads voltage up to 14.6 volts  Includes an On/Off button to conserve battery power when not in use  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED display  IP65 rating & RoHS compliant. Specifications: Output DC: 5V/6A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

50' RJ12-6 Cable for Freedom Remote Panel OptionalXantrex 50' remote cable for Prowatt SW Remote Control For use with ProWatt Series 50' length, replaces 25' cable supplied with unit Includes connectors WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Telephone to Network Cable AdapterThe Freedom SW Remote Adapters (TEL to Xanbus cable) allow Xanbus-enabled devices to establish a Xanbus network using a 4 pin RJ11(a regular telephone cable) or a 6 pin RJ12 cable (a Xantrex remote cable) that comes supplied andinstalled in many recreational vehicles and in pleasure crafts. One cable is red and the other is black.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

SAE Power Cable Inline Fuse HolderThis SAE type polarized electrical connector is a two-prong plug and socket connector set. This connector features an ATO/ATC inline fuse holder (fuse not included).Features: 14-gauge duplex wire ATO/ATC inline fuse holder (fuse not included) Specifications: Length: 12 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.15 lb. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.2 lbs UPC: 035514432795 Brochure (pdf)

Read more less

Ventura Series Dual AC Outlet - 125V - 20AEnjoy the convenience of a dual 125V 20A AC outlet right on the exterior of your vehicle. Designed for outdoor reliability, the Scanstrut Ventura Series keeps you powered no matter where your journey takes you.Need quick access to dual 125V AC power on your boat? The Scanstrut Dual 125V 20A AC Outlet is built for seamless, reliable outdoor performance.With its compact, sleek design, this outlet delivers instant mains power, perfect for running portable Starlinks, blending cocktails, or making smoothies while out on the water.Designed for effortless use, simply lift the waterproof lid and plug in for instant connectivity.Crafted with Scanstrut marine-grade innovation, these sockets undergo rigorous UV exposure and waterproof testing (IPX6-rated). Built with 316 stainless steel components, they promise durability and performance in any environment.Upgrade your boat with a refined, high-performance power solution exactly where you need it.Features: IP68 & IP69K waterproof (with lid closed) Cover Sprung to Fully Open 180° 90° Holding Bump Feature Premium click-to-close design Marine-grade 316 stainless steel hardware Durable matte black plastics Built-in gaskets for a watertight seal Corrosion-resistant design Commercial-grade receptacle included Built-in strain relief Compatible with flat and round cables Mounting Gasket UV Resistant Specifications: Rating: 20A, 125V Cable: 12AWG Triplex Recommended; Copper cable must be used for installation Receptacle: Replace the receptacle only with Scanstrut P/N SC-UTIL-P-006285 (Qualtek 740W-F/06) Certification: ROHS Specifications: Type: Electric Box Dimensions: 3"H x 5"W x 5"L WT: 0.5 lbs UPC: 5060114799295 Brochure (pdf)

Read more less

Ultra Magnetic Waterproof Wireless Charger - 15W - 12/24VMag. Charge. Connect.Experience the power of the Ultra, the first Qi2-certified, mag-compatible marine-grade phone charger. Built for durability and performance, it features an IPX6 waterproof rating (front and back) and toughened glass.Ultra is fast - our smallest and fastest waterproof wireless charger yet!With our Mag technology, your Apple iPhone magnetically locks into the optimal charging position, delivering a secure and reliable connection every time.This waterproof 12/24V wireless charging system, engineered specifically for the marine environment, eliminates cable clutter while keeping your phone charged and accessible, even in the harshest conditions. Its strong magnetic grip ensures your phone stays securely in place during rough rides, making it the ultimate onboard charging solution.TestingSubjected to our harshest environmental, vibration, impact, and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilisation techniques, and premium-grade materials to ensure Ultra is the best choice for mounting and wirelessly charging your phone outdoors.What is Qi2?Qi2 is the latest evolution in wireless charging, developed by the Wireless Power Consortium (WPC). Designed for faster, more efficient power delivery, Qi2 offers up to 15W of charging and features magnetic alignment for a seamless, optimized charging experience. As a leader in marine technology, Scanstrut is bringing this next-generation standard to the water, ensuring reliable, high-performance charging wherever your adventures take you.Features: 15W fast charging Magnetically holds the phone IPX6 waterproof rated: Front & back Toughened glass Qi2-certified Specifications: Input Voltage Range: 10-30V DC (12/24V system) Input current max: 2A Output Power: 15W Standby Power Draw: <0.5W Certification: Qi2, CE, ROHS, FCC, C-Tick, WEEE, UN ECE R10, PSE Certified Specifications: Type: Chargers Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs UPC: 5060114799448 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Flip Pro Plus Fast Charge USB-A & USB-C SocketThe revolutionary ultra-fast combination USB A & USB C charger.Flip Pro Plus is designed for use with either a 12V or 24V input and features 1x 60W USB-C and 1x36W USB-A charging ports for maximum choice and performance. Juggling different devices with different cables? Then this is the option.Features: 12/24V fast charge, dual USB socket Redesign to match other Flip Pro aesthetics Low profile Type A/C dual USB charger The Flip Pro Plus is a combination of Scanstrut's most sought-after chargers, designed to be used with either a 12V or 24V input, and features 1x USB-A and 1x USB-C to create a rapid, universal, ultra-fast charging solution. The Flip Pro Plus is a redesign of Scanstrut’s classic Flip Pro to ensure the boat's aesthetics stay aligned with Scanstrut's other designs in the Flip Pro range.  When not in use, the spring-loaded caps remain tightly closed, protecting the ports from the elements.Featuring a super-compact footprint that matches the rest of Scanstrut’s Flip Pro range, it is constructed from premium, marine-grade materials. Flip Pro Plus has been rigorously tested and is IPX4 waterproof, making it completely washdown-ready.Flip Pro Plus is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V. With a PD chip, this charger is truly universal, making it perfect for charging modern laptops via the USB-C port. It is also designed for charging large tablets, offering an effortless charge for both an iPad Pro & iPhone at the same time.USB – C output: 60W max on 24V system 36W max on 12V system USB-A – A output:36W maxThe install cut-out matches Scanstrut's Flip Pro Max, Duo, and Multi USB sockets (32mm (1 1/8”) for a seamless look across the range. Now users can keep up with the heavier power draws of modern electronic devices while keeping premium, universal USB chargers all around the boat.Universal Universal fit for any USB-A or USB-C connectors Fast charge up to 2 devices at a time Easy Install, using a standard USB mounting hole - 32mm (1 1/8”) Is supplied with an optional front mount bezel Washdown Proof IPX4 waterproof with the cover closed Marine Ready PCB /or electronic with a protective coating UV resistant Plastics 316 stainless hinge and spring Electrical Information Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Standby power draw: 0.01W Important informationThe charge cable supplied with the device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed, whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. Specifications: Type: Chargers Box Dimensions: 3"H x 4"W x 4"L WT: 0.2 lbs UPC: 5060114798878

Read more less

Cover for 10 Terminal BusbarBluewater Terminal Busbar Cover for terminal block style 10 gang, 150 AMP. Specifications: Type: Covers Box Dimensions: 1"H x 1"W x 5"L WT: 0.1 lbs UPC: 810196330474

Read more less

Universal AC Plug - WhiteNo need to cut, strip or splice wires! Mount in an easy-to-reach location for safe AC power cord connection. Watertight and UV resistant cover.Features: Converts plug holder to an AC inlet for ProMariner engineered chargers No cutting, stripping, or rewiring of AC power cord Watertight and UV resistant cover Easy to reach safe AC power cord connections Stainless steel mounting screws included

Read more less

CZone Drop Cable - 2MAdapter cable for connecting Mastervolt devices with CZone support to the CZone or NMEA 2000 network. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Cover for 5 Position BusbarBluewater Terminal Busbar Cover for 5-position busbar, 100 AMP. Specifications: Type: Covers Box Dimensions: 1"H x 4"W x 8"L WT: 0.01 lbs UPC: 810196330597

Read more less

BatteryGuard™Prolong the lifeof your battery. Maximize your battery's performace. Excessive shock and vibration are two of the leading causes for battery failure. Megaware BatteryGuard™ sits under your battery and absorbs the gravity shock caused by excessive vibration and up and down bounce.Features: Reduces up to 80% of the G-shock caused by excessive shock and vibration Protect against premature battery failure Fits up to Group 31 batteries Fits virtually any size battery Great for boats, automobiles, ATVs, Trailers or anywhere shock and vibration can damage a battery Can easily be trimmed to custom shapes or sizes Save money by protecting your battery investment Quick Guide (pdf)Brochure (pdf)

Read more less

70A Trolling Motor Plug & ReceptacleIncreased amperage for modern trolling motors.Features: 70A continuous rating Sealed, waterproof connection Integrated strain relief Keyed design with thumbprint locator Accepts up to 6AWG wire WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

NS-12-20 StartGuardThe abrupt DC system voltage drop that accompanies engine starting can cause micro-processor-driven electronics aboard vehicles or vessels to "dump" programmed memory. StartGuard solves these problems by providing supplemental power to sensitive electronics while the engines are cranking. Newmar's NS-12-20 StartGuard supplies backup power for electronics during engine start. MountingMount the StartGuard in any convenient location, such as under the dash or console, using the four mounting screws provided or #10 bolts.WiringInput from the power source to the electronics must be routed through the StartGuard. Specifications: Input Voltage: 13.8-14.8 VDC nominal, 15.5 VDC Max Relay Activation Input Voltage: 7-15 VDC Output: 20 Amps Max Battery: 12 VDC, 4.0 Amp/Hour, Sealed Rechargeable, 3-5 Year Life (Typical) Backup Capacity (Fully Charged): 20 Amps for one minute/18 Amps for 2 minutes Operating Temperature Range: 0-40 degrees Celsius Winter Storage Temperature Range: -20 degrees to +40 degrees Celsius Dimensions: 8.25" x 4.9" x 3.5" Weight: 5.5 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

APS-70 Automatic Power Selector - 70AThe Automatic Power Selector (APS) is a solid-state device that enables the installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two independent DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, and the operation continues uninterrupted.Two independent power sources are wired to the APS and routed as a single output to the vital load. Alarm sense wires can be easily attached to input studs, providing a loss of power source signal. Features: Easy installation Rugged, rust-proof anodized aluminum case Specifications: Max Loads: 70 amps Voltage Rating: 6 – 50 VDC, neg. ground Stud Terminal Size: 6mm Dimensions (inches): 3.25 x 4.5 x 3.1 Weight (lbs): 2 Quick Guide (pdf)

Read more less

Relay 12V, 75AThis 12V, 75-amp relay is great for automotive applications. Bi-furcated contacts ensure long-term reliability and increased operating efficiency.Applications: Bi-furcated contact reduces contact bounce and increases long-term reliability. This enables the relay to conduct electrical switching more efficiently, reducing unnecessary heat buildup and contact wear. The high intermittent amperage rating of 150 amps for up to 3 seconds, makes this relay great for temporary high-equipment start-up amp draw applications. Offset input/output terminals and an integrated divider design help prevent accidental contact shorts A high-temperature rating of 125 degrees C/257 degrees F makes this a great relay for high-temperature installation environments like engine bays and other low-ventilation spaces. Features: Bullet-proof construction - Robust automotive grade relay with IP54 ingress protection and reinforced mounting tabs ensure secure mounting Dual mounting holes on either side for easy mounting with ¼-20”/M6 1.25 bolts or screws up to #14 screw Incorporate the highest quality materials for superior performance and have a high 100,000 electrical switching cycle capacity Enhanced vibration and shock protection ensures enhanced reliability, a long service life, and the operational readiness of the electrical system Specifications: Intermittent Current @ 3 SEC (Amps): 150 Ambient Temp. Rating (Low/High) (Celsius): -50/125 C Max Continuous Current (Amps): 75 @23 degrees C Electrical Endurance Rating (Cycles): 100,000 Initial Contact Resistance (6VDC) 50 mOhm Operating Voltage Range: 8.8-16VDC Focal Features:Long-Term ReliabilityBuilt from high-quality materials, this relay offers superior electrical switching performance for long-term use in applications.Locking HardwareZinc-plated M5-size input/output terminal screws with held-in-place nuts keep connections secure and allow easy tightening of wire terminations.Automotive GradeWide operational temperature ratings and shock/vibration resistance make this a great relay for an automotive electrical system. Meets or exceeds IEC 60068-2-27 and IEC 60068-2-6, IP54, and IEC 60068-2-2 ratings.Varied Fastener Sizes6mm x 8.7mm elongated holes accommodate up to 1/4-20" or M6x1.25 bolts or up to #14/1/4" sized screws and allow for centering adjustment when installing relays.Reinforced MountingRobust mounting tabs with strengthening gussets ensure the relay stays mounted securely, even through vibration, heat, and wire tension.Compact SizeA small mounting footprint is great for confined installation spaces where space is at a premium.Flat Blade ConnectorsShielded dual 6.3 x.03 mm flat male terminal connectors allow for quick, secure, and easy control wire connections.Offset TerminalsIntegrated divider tab design and varied mounting height input/output pads protect accidental contact shorts.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Triple XD - NMEA 2000 - Relay/ACR/Relay with Knobs - 12 Position DTFeatures: Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware. 500A continuous / 1600A cranking (per switch) - supports all standard marine electrical systems. Intuitive Manual Control option simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state (not available on competitive solutions) Simple Programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers.  90-95% Less Off-State Current: Compared to competitive products and system solutions that require multiple devices for similar functionality Applications: Seamless NMEA 2000 Integration – Control switches, monitor switch status, and battery voltage. Flexible Control Options – Operate via NMEA 2000 or discrete analog inputs for added versatility. 35-75% Reduction in Mounting Space & Product Weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. Eliminates Dead Start Batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present. Expandable with Link and Cross-Link Busbars to Additional Dual, Triple, or Single XD Relays: Supports 2 or 3 battery systems with standard busbar interconnect accessories. Specifications: Type: Electric Box Dimensions: 3"H x 4"W x 8"L WT: 2.8 lbs UPC: 850067590187

Read more less