Maxillume h120 - Flush Mount Flood Light - White Housing - White DimmingThe Maxillume h120 is poised to set a standard in DC powered deck?work lights. Delivering more than 12,000 TRUE lumens and housed in a heavy duty aluminum housing, this light is engineered to work hard. Designed to replace the ubiquitous GE "QF" series of quartz floodlights, tested to withstand vibration and shock and completely water sealed. The Maxillume h120 is the ultimate deck/work light for the roughest sea and toughest of jobs.Specifications: Lumens (White): 12,000 Voltage: 10-30V DC 12V DC Amps: 10A 24V DC Amps: 5A Rated Watts: 120 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 9.6in (24.38cm) Depth: 3.1in (7.87cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 120w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 7"W x 11"L WT: 5.9 lbs UPC: 089300013484

Read more less

ML-2 LED Combination Deck/Steaming LightThis top selling light has been completely retooled to provide better access for bulb replacement. At the same time, the deck light/bulb assembly has been greatly improved with a prismatic reflector for enhanced deck illumination.Features: Steaming Light meets Coast Guard requirements for yachts up to 65' LOA Separate Switching 10 Watt Boy Light Bulb is easily replaceable (WN-211).8 amps Deck Light features identical to ML-1 Provided with 6” of triple-lead wire Weighs 7 oz – measure 5 ¾” vertically Molded body Available in black finish only Mast Light Chafe Guard will also work with Aqua Signal model 254047-7 combo light Replacement bottom ring for NL-1 & 2. Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only.

Read more less

E-Series PRO 6" Flood LED - BlackThe E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.2-Piece Housing - This LED Light Bar now features a 2-piece housing that is stronger, more durable and features an improved cooling system. 2-Piece housing are Torture Tested & Approved! With user serviceable mounting hardware and additional mounting bosses on the bottom and an integrated deutsch/amp plug, it makes this new 2-piece housing a more reliable sealing surface for you LED Light Bar.Features: Optics: Hybrid - Flood LED Color: Color: White Finish Color: Black Length: 6" Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.84 lb Sold As: Single Hybrid Optics 20° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Specifications: Watts: 80 Amp Draw: 5.71 LED's: 12 Raw Lumens: 9504 Lux @ 10m: 166.16 Beam Distance: 128.9 m Peak Beam Intensity: 16,616 cd Specifications: LED: Yes Bulb Watts: 80w Box Dimensions: 7"H x 7"W x 9"L WT: 4.8 lbs UPC: 849774028885 Brochure (pdf)

Read more less

Docking, Hull, Back-Up LED Lights - ChromeFeatures: Sold as a Pair Operates 12 Volt DC Systems Draws 4 Amps Each Sealed Built-in Rear Heat Sink Thermal Insulated Wires Pyrex Optical Lens LED Lamp Assembly Removable Lens Cover Water Tight Gaskets Included 7.60" x 4.15" x 3.75" Specifications: Bulb Watts: 7w LED: Yes Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 6"W x 8"L WT: 2.3 lbs UPC: 601373580023

Read more less

High Intensity Outdoor Dimmable LED Spreader Light - WhiteLunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern.A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power."Features: IP67 rated 3 different mounting positions 1,100 lumens of light White Specifications: Voltage - Input Range (Volts): 10-40v Bulb Watts: 11w LED: Yes Box Dimensions: 1"H x 9"W x 9"L WT: 0.76 lbs UPC: 855748005387 Quick Guide (pdf)Brochure (pdf)

Read more less

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:   12/24 V - 12 W Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Temperature of LED: less than 158° with 77° ambient temperature Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120 Watt Halogen bulbs LED Lifetime: 50,000 Hours LED Beam angle: 110° 0.8 Amp draw at 12 Volt IP68 Fits the previous cutout Dimensions: 6” W x 2-1/2” H x 1-3/4” D Cutout: 4-1/2” W x 1-1/2” H

Read more less

Capri3 Spreader Light - White/Blue Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Maxillumeh60 - Flush Mount Flood Light - White Housing - White DimmingCustomers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, new mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.Specifications: Lumens (White): 6000 Voltage: 10-30V DC 12V DC Amps: 5A 24V DC Amps: 2.5A Rated Watts: 60 CCT: 5000 CRI: 70+ Length: N/A Width: 8.3in (21.08cm) Depth: 2.6in (6.6cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 60w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 5"W x 10"L WT: 2.2 lbs UPC: 089300013361

Read more less

4" Marine Spreader Light - Flood Optics - White Housing - Pro Series 3.0Black Oak 4" Marine Spreader Light Flood Scene - White Housing - Pro Series 3.0Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness. This version has a 120° throw, much wider than the 45° throw of Black Oak's standard flood version. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Flood optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader light (bow/stern) Aft deck fishing lights    Foredeck lights Overheard lighting (marine/non-marine use) Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Width x Height): 5" x 2.13" x 2.15”  In the Box: Marine spreader light (1) Wiring pigtail with 2-pin waterproof deutsch connector  Mounting hardware required to install *Sold as an Individual Specifications: Bulb Watts: 20 LED: Yes Box Dimensions: 5"H x 5"W x 7"L WT: 1.2 lbs UPC: 850044517275

Read more less

10W Slimline LED Floodlight, 120VAC Only, Cool White, 1200 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications: Power: 12W Voltage Range: 120VAC (108-132VAC - 60Hz) Output: 1200 Lumen, 4000K, >80CRI Dimensions: 130 (5.1”) W x 91 (3.6”) H x 28 (1.1”) D Specifications: Bulb Watts: 12w Voltage - Input Range (Volts): 108-132v LED: Yes Box Dimensions: 2"H x 7"W x 10"L WT: 1.1 lbs UPC: 850001461047 Brochure (pdf)

Read more less

Ibiza LED Engine Room Light - Non-Dimming White - White FinishAs beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F  Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 10-30v Bulb Watts: 16w LED: Yes Box Dimensions: 2"H x 5"W x 13"L WT: 1.1 lbs UPC: 089300015204 Brochure (pdf)

Read more less

Zephyr LED Spreader/Deck Light - Brushed White Base - White Non-DimmingLumitec's spreader light is equally well suited to lighting the foredeck of an elegant sloop or the cockpit of a sport yacht. Mounted on spreaders, spars, radar arches or towers and flybridges at a mounting height of 16 feet, our spreader light brightly illuminates an area nearly 24 feet in diameter with more than 1,000 lumens+. Positionable, sleek and versatile with unsurpassed reliability - meaning no more costly and complex bulb replacements.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 4.49in (11.41cm) Depth: 2.83in (7.20cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 089300013255

Read more less

Capri2 - Flush Mount LED Flood Light - Black Housing - 2-Color White/Blue DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. The exclusive DeckSweep technology puts the light where you need it most, providing for up to twice the usable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 3"H x 5"W x 7"L WT: 0.6 lbs UPC: 089300011862

Read more less

Caprera3 Spreader Light - White Non-Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Caprera3 Spreader Light - White/Blue Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Sea Hawk-XLR LED Floodlight - White LED/White HousingNext level technology offering incredible intensityOur brightest Sea Hawk to date!1300 lumens of crisp, white, darkness-busting illumination with all the proven Sea Hawk durability and efficiency advantages.Engineered light patternsAdvanced optical systems deliver incredible illumination without glare. Spread lamps illuminate a wide, close-range spread over a cockpit, foredeck or working area. Spot lamps provide a narrower, more concentrated illumination for tuna towers, masts or for forward facing lighting on a variety of applications.Unique Corrosion Proof HousingSea Hawk XLR housings are precision injection molded from thermally conductive ceramic polymer. This advanced material draws heat from internal electronics for reliable long-term operation and eliminates the need for an aluminium housing in this class of floodlight, removing corrosion risks in the harsh marine environment.Integrated DimmingBuilt-in convenience of switching between High level full intensity and low level dimmed output.Multivolt 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Specifications: Housing Description: ‘Non metal’ thermally conductive polymer housing Lens Material: Grilamid Bracket: Polished 316 stainless steel Color Temperature: 5000K (White) Cable: Pre-wired with 0.5M of triple core marine cable Operating Voltage: Multivolt™ 9-33V DC Degree of Protection: IP 67 - Completely Sealed High Power Consumption: 18W (<1.5A@12V / <0.75A@24V) Low Power Consumption: 2W (<0.17A@12V / <0.08A@24V) Weight: 450g (including cable) Light Output: 1300 lumens (White) Approvals: CE, RCM Manufactured In: New Zealand Specifications: Voltage - Input Range (Volts): 9-33v LED: Yes Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 9416325233398 Brochure (pdf)

Read more less

Caprera3 Spreader Light - White Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Capri3 Spreader Light - White/Red Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Caprera3 Spreader Light - White Non-Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Capri2 - Flush Mount LED Flood Light - 2-Color White/Blue DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.6 lbs UPC: 089300103673 Quick Guide (pdf)Brochure (pdf)

Read more less

D-Series PRO Hybrid-Diffused LED - Pair - WhiteThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid-Diffused Color: White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 60° Diffused Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10M: 20.6 Beam Distance: 45.4M Peak Beam Intensity: 2060 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 6"H x 7"W x 9"L WT: 4.1 lbs UPC: 849774027277 Brochure (pdf)

Read more less

Caprera3 Spreader Light - White/Red Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

2" Marine Spreader Light - Scene Optics - White Housing - Pro Series 3.0READY FOR ANYTHING! This 2-inch marine LED scene spreader light is the perfect way to add lights to a vessel. The 2'' Single Row Scene Light throws light at a 120-degree beam angle, giving users extremely widespread dispersion without a hot spot, and is perfect for area lighting when boating or fishing at night. Whether users are tying knots, catching fish, or cleaning the boat, they will have all the light that is needed.With the flick of a switch, users can see that this vehicle work light is built with quality parts. From the moment users put the 2-inch LED light bar Single Row series in their hands, it becomes completely clear how this vehicle work light can take the beating Black Oak's claim it can. This small light bar comes complete with a wiring pigtail, stainless steel brackets, and hardware—everything needed to mount and get going!Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Golf cart lighting Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Width x Height x Depth): 2.82" x 1.91" x 2.18” In the Box: 2" marine spreader light (1) Wiring pigtail with deutsch connector  All hardware, ready to install! *Sold as an Individual Specifications: Bulb Watts: 20 LED: Yes Box Dimensions: 5"H x 5"W x 5"L WT: 0.8 lbs UPC: 860470002283

Read more less

4" Marine Spreader Light Flood Scene LED Pro Series 3.0 - BlackWith the massive popularity of our 2-inch Black Flush Mount Spreader Light, Black Oak decided to release a 4-inch Scene Spreader Light in Black as well! With the amazing 120 degree throw and 3,120 raw lumens, this light is perfect for lighting up your deck, cockpit, bow, and more. Offered in both black and white, you can now match your other accessories on your boat.Activities & Uses: Spreader light (bow/stern) Aft Deck Fishing lights    Fore Deck lights Overheard lighting (marine/non-marine use) Specifications: Dimensions: L = 5" x H= 2.15" x W = 2.13" Total Wattage: 40W Amp Draw:  2.8 A LED Quantity: 4 Weight: 0.35 lb Raw Lumens: 3,120 Warranty: Lifetime Guarantee: 30 Day Money Back IP Rating: IP69k E-Mark: E9 Includes: (1) Pro Series 3.0 - 4 Inch Spreader Light (1) Wiring pigtail with 2-pin waterproof Deutsch connector  Mounting Hardware required to install

Read more less

4" Marine Spreader Light - Scene Optics - White Housing - Pro Series 3.0Designed and tested at a big name boat builder next door to Black Oak in Sarasota, Florida, this 4" spreader is perfect for those die-hard fishermen who love those late nights and early mornings. With a whopping 3,120 raw lumens, users no longer have to worry about rigging rods in complete darkness. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader light (bow/stern) Aft deck fishing lights    Foredeck lights Overheard lighting (marine/non-marine use) Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Width x Height): 5" x 2.13" x 2.15” In the Box: Marine spreader light (1) Wiring pigtail with 2-pin waterproof deutsch connector  Mounting hardware required to install *Sold as an Individual Specifications: Bulb Watts: 40 LED: Yes Box Dimensions: 5"H x 5"W x 7"L WT: 1.2 lbs UPC: 860470002252

Read more less

CapriLT - LED Flood Light - White Finish - White Non-DimmingSince 2008 Lumitec's Capri and Caprera family have established the benchmark for quality, performance, and value in LED flood replacements for 55W halogens. With more than 1,000 integrating sphere tested lumens, the CapriLT builds on that legacy and reaffirms market leadership.Developed, designed, and manufactured entirely in Florida, USA, the CapriLT delivers exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. In short, the CapriLT delivers exceptional value in extreme environment LED flood lights.Specifications: Voltage: 10-30V DC 12V DC Amps: 1.3A 2V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 12 Lumens (White): 1000 Width: 4.94" Height: 1.75" Depth: 1.75" IP67 Compliant Certified Ignition Protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 10-30v Bulb Watts: 12w LED: Yes Box Dimensions: 4"H x 6"W x 7"L WT: 0.6 lbs UPC: 089300012883

Read more less

ML-1 LED Spreader/Deck LightForespar® now offers two mast light systems of superior quality. Model ML-1 is a deck light designed primarily for installation on the mast just below the spreaders. Model ML-2 is a combination deck-steaming light with separate switching, to be mounted on the forward part of the mast.The ML-1 and ML-2 lights feature a durable molded polymer housing assembly with a readily adaptable wraparound mounting apron to accommodate virtually any mast surface curvature. For 12V systems. Replacement bulbs are available from Forespar® and most marine dealers.Features: Lightweight Rugged Composite Material Adaptable to Mast Radius of Ease in Mounting 20W Adaptable to Mast Radius of Ease in Mounting 20W Easily Replaceable Halogen Type Bulb 1.4 amps Weighs 4 oz. – Measures 3-5/8” Vertically Provided with 6” of Twin-Lead Wire Molded Body Available in black finish only Replacement bottom ring for NL-1 & 2 Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only. Protect your mast lights from sails and birds

Read more less

Bracket Mount LED Spreader Light - WhiteScandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment. Features: An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most Guaranteed against corrosion, discoloration, and water intrusion Comparable to a 120-watt Halogen bulb. 12/24 volts (8-30 volts) UV-resistant Zytel® Nylon Resin housing Polycarbonate Lens IP68 *The "P" within the part number indicates retail packaging Specifications: Bulb Watts: 3 LED: Yes Box Dimensions: 3"H x 7"W x 8"L WT: 0.5 lbs UPC: 786142414409

Read more less

Spreader LED Floodlight KitEnhance your visibility with a Seaview Floodlight Kit. This kit is specifically for the Seaview Spreader Kits and comes with a Lunasea floodlight (8W, 1,600 lumen LED flood). Compact outdoor light utilizing the newest high-performance LED technology. Excellent for lighting up small to medium-sized areas.Fits both Seaview Spreader Kits #SP1MODV2 and #SP2MODV2.Features: Hard Anodized aluminum housing with baked Urethane finish for extreme durability 120° beam angle Tempered glass lens (will not yellow like plastic lenses) Breather valve Cool white illumination (5700K) IP67 rated In the Box: 1-1/4" stainless steel bracket Mounting hardware Lunasea LED floodlight (LLB-61WC-81-00) Specifications: Bulb Watts: 8w LED: No Box Dimensions: 3"H x 6"W x 6"L WT: 0.8 lbs UPC: 850047035097

Read more less

35W Slimline LED Floodlight, 12/24V, Cool White, 4800 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications: Power: 35W Voltage Range: 12/24V Output: 4800 Lumen, 5700K, >80CRI Dimensions: 211 (8.3”) W x 165 (6.5”) H x 39 (1.5”) D  Specifications: Bulb Watts: 35w Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 7"H x 7"W x 12"L WT: 1 lbs UPC: 850001461061 Brochure (pdf)

Read more less

Compact Bracket Mount LED Spreader Light - WhiteThis compact spreader light features 3 each powerful 3W LEDs, comparable to a 75W halogen bulb. Durable Zytel housing is UV resistant and is sure to withstand the elements for many seasons. A stainless steel bracket allows you to direct the light where it is most needed.Features: White housing 12/24 Volt, 5 Watt Polycarbonate Lens 610 Lumens IP67 *The "P" within the part number indicates retail packaging Specifications: Bulb Watts: 5 LED: Yes Box Dimensions: 3"H x 7"W x 8"L WT: 0.35 lbs UPC: 786142414454

Read more less

Flush Mount Spreader Light - 10-30V - WhiteThis is a flush-mount spreader light with white trim.Features: 12/24 V, 12W High-Quality Composition Frame Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120-watt halogen bulbs 0.8 Amp draw at 12 volts IP68 Specifications: Dimensions (W x H x D): 6 x 2-1/2 H x 1-3/4 in. Cutout (W x H): 4-1/2 x 1-1/2 in. LED Lifetime: 50,000 Hours LED Beam Angle: 110° The temperature of the LED: Less than 158° with a 77° ambient temperature *The "P" within the part number indicates retail packaging Specifications: Bulb Watts: 3 LED: Yes Box Dimensions: 2"H x 9"W x 9"L WT: 0.5 lbs UPC: 786142413433

Read more less

SR-L Series Marine Spreader Light - White Surface Mount - White Light with Blue HaloThe RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle. The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lightingUse the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately)The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens. Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light Specifications: LED: Yes Voltage - Input Range (Volts): 9 - 36 Box Dimensions: 3"H x 7"W x 7"L WT: 0.75 lbs UPC: 849774008658 Brochure (pdf)

Read more less

SR-Q Series PRO Flood Surface Mount - BlackThe SR-Q PRO is a sleek, low-profile lighting option that packs more lighting output than ever before, thanks to recent improvements to the advanced LEDs inside. The SR-Q Professional Race Output now emits up to 102% more raw lumens, depending on optics. An excellent choice for any application where space is limited, the SR-Q PRO makes auxiliary lighting professional-grade. Other recent updates to the SR-Q PRO include updated RIGID branding and blacked-out circuit boards for a more refined look. This light has a single row of LEDs and a flood beam pattern.Features: Flush mount Multiple mounting capabilities exist, such as the suction cup mount and angled flush mounts, just to name a few 50,000+ hour lifespan 9-36 V DC Durable UV-resistant powder coat High-grade aluminum alloy Integrated thermal management system Impact-resistant polycarbonate lens Over/Under voltage protection RFI/EMI protection Reverse polarity protection RoHS compliant IP68 compliant - dust/water ingress Operating temp -40 deg F to +145 deg F SAE J575 compliant: shock/vibration Available in white and black housing Pressure-equalizing vent Waterproof connector (exclusions apply) Limited lifetime warranty Off-road use only Specifications: Size: 2 x 5 inches Weight: 0.74 lbs. Optics: Flood Watts: 32 Amp Draw: 2.29 Raw Lumens: 3168 Lux @ 10M: 69.24 Beam Distance @1Lux: 83.2 Beam Distance @.25Lux: 166.4 Horizontal Beam Angle: 50.8 Product Comes With: Mounting hardware Stainless steel, u-shape bracket (excludes FM) Solid black light cover (excludes FM) Harness with switch Deutsch connector Specifications: Bulb Watts: 32 LED: Yes Box Dimensions: 7"H x 7"W x 7"L WT: 2 lbs UPC: 849774027963

Read more less

D-Series PRO - Flush Mount - Diffused - Pair - BlackOne of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.Features: Optics: Hybrid - Diffused LED Color: White Finish Color: Black Mount Type: Flush Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.46lb Sold As: Pair Hybrid Optics 60° Diffused Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10m: 20.6 Beam Distance: 45.4 m Peak Beam Intensity: 2060 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 7"H x 7"W x 9"L WT: 4 lbs UPC: 849774027017 Brochure (pdf)

Read more less

Maxillume h120 - Trunnion Mount Flood Light - White Housing - White DimmingThe Maxillume h120 is poised to set a standard in DC powered deck work lights. Delivering more than 12,000 TRUE lumens and housed in a heavy duty aluminum housing, this light is engineered to work hard. Designed to replace the ubiquitous GE "QF" series of quartz floodlights, they are completely water sealed and tested to withstand vibration and shock. The Maxillume h120 is the ultimate deck/work light for the roughest sea and toughest of jobs.Specifications: Lumens (White): 12,000 Voltage: 10-30V DC 12V DC Amps: 10A 24V DC Amps: 5A Rated Watts: 120 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 8in (20.32cm) Depth: 3.25in (8.25cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 120w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 8"W x 10"L WT: 6.7 lbs UPC: 089300013460

Read more less

FL50 50W/120VAC Flood Light - GreenHydro Glow Fishing Lights manufactures high quality, energy efficient, water proof lights for both above the water and underwater applications. Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability. The fish attracting capability of our high output LED dock lights will enhance fishing, and just watching fish, right off your dock for the entire family. Factors such as water depth, clarity, boat traffic, and the desired appearance of the illuminated area should be considered when choosing the best suited dock light.The FL-50 is an "above the water" style light. The FL-50 LED floodlight is designed with a more focused beam than the DM260. This model is recommended for docks high off the water or where water conditions is stained or not very clear. The FL-50 features a focused light beam to provide greater depth of penetration. The FL-50 is 120v and comes with a 10' cord. The size of this model is about 8 inch x 8 inch in size. The FL-50 comes in green color to maximize fish attraction. With only 1/2 amp draw and 50w you can easily run several lights on a single circuit. Specifications: Bulb Watts: 50 Voltage - Input Range (Volts): 120 LED: Yes Box Dimensions: 5"H x 9"W x 10"L WT: 5 lbs UPC: 814347000513

Read more less

Nevis Legacy Surface Mount Engine Room LightAnother high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard-to-light areas with a bright even light. Completely sealed, IP67 compliant, and intrinsically safe.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6500 Color Rendering Index: 70+ Rated Watts: 11 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 5.00" (12.7cm) Height: 2.5" (6.35cm) Depth: 0.63" (1.60cm)

Read more less

D-Series PRO Hybrid-Flood LED - Pair - BlackThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid - Flood Color: White Finish Color: Black Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 20° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10M: 58.19 Beam Distance: 76.3M Peak Beam Intensity: 5819 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 7"H x 7"W x 9"L WT: 3.6 lbs UPC: 849774026935 Brochure (pdf)

Read more less

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them!Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual Specifications: Bulb Watts: 20 LED: Yes Box Dimensions: 5"H x 5"W x 5"L WT: 0.85 lbs UPC: 860470002276

Read more less

Twin Beam Hand Held Search Light - 12VHella marine hand held search lights are vital tools for night sailing and landing maneuvers.Features: Two reflectors and two halogen bulbs on separate switches 55W bulb for close range. 100W bulb for long range (12V Version) 2 x 70W bulbs (24V Version) Trigger switch integrated into the grip allows morse code operation Extended front edge for protection of the glass lens Specifications: Housing Description: Shock and vibration resistant plastic, High gloss aluminium reflector Bulb: 1 x 12V / 55W H3 bulb included 1 x 12V / 100W H3 bulb included 2 x 24V / 70W H3 Mounting: Hand held. Deck mount base accessory available 8HG 998 519-001 Cable: Spiral cable with cigarette lighter plug Extended length 3.5m Degree of Protection: IP X6K Maximum Output: 12V / 155W or 24V / 140W Specifications: Batteries Included: No Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 7"H x 7"W x 9"L WT: 2.6 lbs UPC: 9002920001892

Read more less

LED Floodlight G4 - Black Housing - 2100 LumensIlluminate waters like never before with Hella Marine. Experience the unparalleled luminosity of the LED Floodlight G4 series. Designed to cater to diverse marine needs, these floodlights deliver unparalleled brightness and energy efficiency. Whether you're cruising through close quarters or gazing across vast expanses, our variants are tailored to meet your specific requirements. Dive into the details and pick the perfect floodlight for your marine journey.Features: High-Intensity LED Technology - Experience superior brightness Energy Efficient - Enjoy prolonged battery life without compromising on illumination Durable Design - Withstand harsh marine conditions with a robust build Easy Installation - Get set up in no time with user-friendly fittings

Read more less

6 LED Single Row Driving LightSPECS Input Voltage: 10-30V DC Wattage: 18W (6-3W OSRAM LEDs) Raw Lumens: 1440 Color Temperature: 6000K Beam Pattern: 25deg Spot CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Black Powder Coated Steel Hole Dimensions: Mounting Bolt Drill – .25in Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9 amps at 13.8 volts IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Beam Pattern: Driving Voltage - Input Range (Volts): 10-30v Length (Inches): 6.25" Housing: Black Box Dimensions: 4"H x 4"W x 8"L WT: 1.2 lbs UPC: 086429312917

Read more less

Ignite Surface Mount Diffused - Pair - BlackMost vehicles have very inadequate backup lighting, which can be a major safety problem. RIGID makes it easy to add compact and powerful backup lighting to any vehicle with the RIGID Ignite™ Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4” x 1.4” x 2”. The Backup Light Kits are available with a pair of either flush mount or surface mount Ignite lights along with mounting brackets and related hardware. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicle’s existing backup lighting circuit.Features:  Available in Black Only RIGID’s Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Available only in Diffused RIGID Quality & Performance Easy Install Specifications:  Watts: 12 LED's: 1 Raw Lumens: 1000 Lux @ 10m: 9 Beam Distance: 59.5M Peak Beam Intensity: 884.5 cd Specifications: Bulb Watts: 12w Voltage - Input Range (Volts): 6-28v LED: Yes Box Dimensions: 2"H x 5"W x 9"L WT: 0.75 lbs UPC: 849774015007 Brochure (pdf)

Read more less

1" x 2" 65° - DC Scene Light - BlackRIGID Industries 1x2 65° DC Scene Light prodcues 1100 raw lumens and features a vertical spread of 69° and a horizontal spread of 65°. Using the latest LED technology, all new patent pending optic system, minimal amp draw, and extreme output, the 1x2 65° Scene Light is the perfect area lighting solution. This versatile light can be mounted to your RV, toy hauler, tractor trailer, fire truck and can even be mounted to the undercarriage of your vehicle. Limited Lifetime Warranty.Features:  65° Horizontal Spread X 69° Vertical Spread Flat Mounting Surface Available with Cool White or Amber LEDs 9-36 V DC IP68 Compliant Powder Coated Aluminum Housing Specifications:  Watts: 9 Amp Draw: 0.75 @14v LED's: 3 Raw Lumens: 1100 Lux @ 10m: 7 Beam Distance: 26.4 m Peak Beam Intensity: 6.95 cd Brochure (pdf)

Read more less

Caprera3 Spreader Light - White/Blue Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Module 70 Gen 4 LED Floodlight - White Housing - Long Range - 800 LumensDurable and efficient LED floodlights offering power-saving illumination.Capitalizing on the electronic and optical performance of the larger body LED Mega Beam series, Hella marine Module 70 LED lamps offer state-of-the-art technology and performance in a smaller housing.Offering 800 lumens of crisp white light for a low power consumption of 15W (1.25A @ 12V), the compact high technology lamps provide substantial power savings compared to 55W halogen lamps.The completely sealed module 70 series provides ultra-durable ‘fit and forget’ advantages with ongoing reliability in applications subject to high vibration, impact, and shock loads.Features: LED 12/24V Multivolt IP67 Completely Sealed UV Resistant 800 Lumens 5-Year Warranty Specifications: Material Description: UV and impact-resistant plastic front housing Die-cast aluminum body Glass lens Bracket: 316 stainless steel Color Temperature: 6500K Cable: Pre-wired with 2.0m of twin core marine cable Operating Voltage: Multivolt 9-30V DC Degree of Protection: IP 67 - Completely Sealed Power Consumption: 13W (<1.08A@12V / <0.54A@24V) Weight: 500g (including cable) Light Output: 800 lumens (Gen III) Approvals: CE

Read more less

Capri3 Spreader Light - White Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less