SR-L Series Marine Spreader Light - White Surface Mount - White Light with White HaloThe RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle. The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lightingUse the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately)The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens. Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light Specifications: Voltage - Input Range (Volts): 9 - 36 LED: Yes Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 849774008634 Brochure (pdf)

Read more less

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:   12/24 V - 12 W Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Temperature of LED: less than 158° with 77° ambient temperature Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120 Watt Halogen bulbs LED Lifetime: 50,000 Hours LED Beam angle: 110° 0.8 Amp draw at 12 Volt IP68 Fits the previous cutout Dimensions: 6” W x 2-1/2” H x 1-3/4” D Cutout: 4-1/2” W x 1-1/2” H

Read more less

LED Cockpit Spreader Light 1440 Lumens - BlackThese marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Available in black or white. Low amp draw. 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Caprera3 Spreader Light - White Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Capri3 Spreader Light - White Non-Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Caprera3 Spreader Light - White/Red Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

E-Series PRO 6" Flood LED - BlackThe E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.2-Piece Housing - This LED Light Bar now features a 2-piece housing that is stronger, more durable and features an improved cooling system. 2-Piece housing are Torture Tested & Approved! With user serviceable mounting hardware and additional mounting bosses on the bottom and an integrated deutsch/amp plug, it makes this new 2-piece housing a more reliable sealing surface for you LED Light Bar.Features: Optics: Hybrid - Flood LED Color: Color: White Finish Color: Black Length: 6" Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.84 lb Sold As: Single Hybrid Optics 20° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Specifications: Watts: 80 Amp Draw: 5.71 LED's: 12 Raw Lumens: 9504 Lux @ 10m: 166.16 Beam Distance: 128.9 m Peak Beam Intensity: 16,616 cd Specifications: LED: Yes Bulb Watts: 80w Box Dimensions: 7"H x 7"W x 10"L WT: 4.8 lbs UPC: 849774028885 Brochure (pdf)

Read more less

CapriLT - LED Flood Light - White Finish - White Non-DimmingSince 2008 Lumitec's Capri and Caprera family have established the benchmark for quality, performance, and value in LED flood replacements for 55W halogens. With more than 1,000 integrating sphere tested lumens, the CapriLT builds on that legacy and reaffirms market leadership.Developed, designed, and manufactured entirely in Florida, USA, the CapriLT delivers exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. In short, the CapriLT delivers exceptional value in extreme environment LED flood lights.Specifications: Voltage: 10-30V DC 12V DC Amps: 1.3A 2V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 12 Lumens (White): 1000 Width: 4.94" Height: 1.75" Depth: 1.75" IP67 Compliant Certified Ignition Protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 10-30v Bulb Watts: 12w LED: Yes Box Dimensions: 4"H x 6"W x 7"L WT: 0.6 lbs UPC: 089300012883

Read more less

Bracket Mount Spreader Light - White Housing - WhiteThe Shadow-Caster 4X Bracket Mount Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The bracket mount version is great for retrofitting existing installations. The Shadow-Caster parabolic reflector design offers a 60-degree beam. It is available in a single color white. The brightness can be controlled with a standard switch or Shadow-Caster Light Commander controller and NMEA 2000 interface.Features: Soft start technology ramps the brightness up gently over 2 seconds Power toggle feature to set brightness Cool white color temperature LED for best performance High-efficiency switch mode power supply Waterproof aluminum housing Unique reflector design to reduce glare Specifications: 3000 lumens output 60-degree beam angle 20-watt power draw 10-30 volts input Current draw: 1.5 amps 6200 Kelvin cool white color temperature 4.25” (108mm) overall length X 1.6” (41mm) width X 2.8” (71mm) height IP67 waterproof design Durable glass lens Includes: Spreader light 3’ (1m) submersible grade cable SS 316 bracket Standard 3-year warranty Quick Guide (pdf)Brochure (pdf)

Read more less

Sea Hawk XL Dual Color LED Floodlights - Warm White/White LED - Black HousingProfessional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Housing Material: Thermally conductive polymer housing Lens Material: Heavy duty Grilamid lens Bracket Material: 316 Stainless Steel Operating Voltage: 9-33V DC Power Consumption: White LEDs <12W, Red <2W, Blue <4W Light Output: 750 lumens Color Temperature: 5000K (White) Degree of Protection: IP 67 - Completely Sealed Cable: Pre-wired with 2.5M of tinned marine cable Approvals: CE Specifications: Voltage - Input Range (Volts): 9-33v LED: Yes Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 9416325243243

Read more less

SR-Q Series PRO Spot Diffused Midnight Surface Mount - PairIt’s all about stealth with RIGID’s Midnight Diffused Lens. Available in SR-Q, SR-M and D-Series, these lights feature blacked out hardware, blacked out spot optics and the blacked out Diffused Lens. The Midnight Optics along with the smoked diffused lens enable RIGID to virtually disappear during the day while still providing powerful LED technology to light up the night. Thanks to improved LED technology, the Midnight Edition PRO now offers more light output than ever before. In the Box: Mounting Hardware Black Powdercoat, U-Shape Bracket (Excludes FM) Harness w/Switch Deutsch Connector ∗ Sold as a Pair Specifications: Voltage - Input Range (Volts): 36v Bulb Watts: 30w Box Dimensions: 7"H x 7"W x 10"L WT: 3.15 lbs UPC: 849774031045

Read more less

Capri3 Spreader Light - Spectrum - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

D-XL PRO - Specter-Driving LED - Pair - BlackWith the enormous popularity of the original D-Series came the need for a slightly larger, more powerful lighting solution. The RIGID D-XL PRO boasts more light than ever before in a housing that measures 4" x 4". Recent improvements to the LEDS in the D-XL Series PRO with its new Professional Race Output of up to 170% more raw lumens while maintaining the efficiency that is the hallmark of the entire RIGID product line. Featuring an unbreakable polycarbonate lens, durable UV-resistant polyester powder coat, stainless steel hardware, and a vibration isolator, the D-XL Series PRO is available with your choice of beam pattern optics. Recent updates include new RIGID branding and blacked-out circuit boards for a more refined look. Whether it's off-road, power sports, general automotive, mining, agriculture, or fire and rescue, the D-XL PRO is perfect for any application that requires a high intensity LED light.Features: Family: Dually XL Series | PRO Optic: Specter-Driving LED Color: Cool White Finish Color: Black Mount Type: Surface Shipping Dimensions: 6" × 12" × 6" Product Weight: 3.62lb Sold As: Pair Stainless Steel Hardware Includes: Harness, Bracket, and All necessary mounting hardware UV-resistant Polyester Powder-Coat Unbreakable Polycarbonate Lens Vibration Isolator Specifications: Watts: 89 Amp Draw: 6.36 LED's: 12 Raw Lumens: 9504 Lux @ 10M: 638.4 Beam Distance: 252.7M Peak Beam Intensity: 63841 cd Brochure (pdf)

Read more less

D-SS Series PRO Flood LED Surface Mount - Pair - BlackOne of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.Features: Family: D-SS Side Shooter | PRO Optics: Flood LED Color: White Finish Color: Black Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.44lb Sold As: Pair Up to 50,000+ Hour Lifespan IP68 Compliant Impact Resistant Lens GORE® Pressure Equalizing Vent Harness & Switch Included Mounting Brackets Included Specifications: Watts: 47 Amp Draw: 3.36 LED's: 7 Raw Lumens: 5544 Lux @ 10m: 71.29 Beam Distance: 84.4 m Peak Beam Intensity: 7,129 cd Specifications: Bulb Watts: 47w LED: Yes Box Dimensions: 6"H x 7"W x 13"L WT: 4.6 lbs UPC: 849774027451 Brochure (pdf)

Read more less

35W Slimline LED Floodlight, 120/240VAC, Cool White, 4500 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications: Power: 35W Voltage Range: 120/240VAC (108-264VAC - 50/60Hz)  Output: 4500 Lumen, 5700K, >80CRI Dimensions: 211 (8.3”) W x 165 (6.5”) H x 39 (1.5”) D  Specifications: Bulb Watts: 35w Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 3"H x 10"W x 13"L WT: 3.15 lbs UPC: 850001461054 Brochure (pdf)

Read more less

D-Series PRO Hybrid-Flood LED - Pair - WhiteThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid-Flood Color: White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 20° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10M: 58.19 Beam Distance: 76.3M Peak Beam Intensity: 5819 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 6"H x 7"W x 9"L WT: 4.1 lbs UPC: 849774027253 Brochure (pdf)

Read more less

Low Pro™ Flush - Black Housing - Red LEDThe Most Advanced Spreader Light!The Low Pro™ Spreader is crafted for maximum functionality and ease of use, giving you complete control over your lighting with three built-in settings. Operated through any standard or digital switch, you can toggle between 100% brightness, 50% brightness, or halo-only without the need for separate dimmers or specialty switches. These integrated features make it effortless to achieve the perfect lighting for any situation.The Low Pro™ Spreader Light enhances your boat's style with its sleek and bold design, offering both functionality and sophistication. The integrated halo ring lighting adds a clean, modern touch, making it a standout feature for any marine vessel. More than just an aesthetic upgrade, the halo accent light is practical too, providing subtle, ambient lighting that’s perfect for nighttime docking, fishing, or creating a refined atmosphere. Whether you're looking for the best customizable marine lighting or a way to elevate your boat's appearance, the Low Pro™ Spreader delivers on all fronts.Select the Setting You WantEasily customize your lighting with a simple toggle of the switch. The first toggle activates the spreader at 100% brightness for full illumination. The second toggle on/off reduces it 50% for a softer glow, the third toggle on/off powers only the halo ring for a stylish accent or subtle nighttime visibility. Not Just for LooksThe halo feature is more than just a bold accent for your boat - it's also a practical lighting solution. Power up the halo at night to softly illuminate the deck without compromising your night vision. Ready to light up your whole boat?Built to LastEngineered to endure the harshest environments, these lights are designed to meet IP69K standards - the highest level of protection against water, dust, salt, condensation, and extreme temperatures. Whether facing salt spray, blazing sun, snow, or high-pressure water, they deliver reliable performance every time. Built for durability and backed by our lifetime warranty, trust that you're investing in quality that lasts as long as your adventures! Brightest Spreader on the MarketThe Low Pro™ Spreader delivers unparalleled brightness for its size, making it the brightest marine spreader available, ideal for professional and recreational boaters. With an impressive 2,000 lumens and a wide 120-degree beam pattern, it ensures maximum visibility for every task.Features: Customizable Light Settings: Easily toggle between 100%, 50%, or Halo-only modes to suit your needs. Accent Halo Options: Available in white, blue, red, or amber to match your style or function.  High-Performance Brightness: Produces 2,000 lumens for superior illumination.  Wide Coverage: Features a 120° beam spread to light up large areas with ease.  Marine-Grade Durability: Built with IP69K waterproof housing to withstand harsh marine environments. Easy Integration: Connect seamlessly to your digital or physical switch for hassle-free control.  Versatile Power Compatibility:  Operates on a wide range 9-36V DC inputs.  High-Grade Polycarbonate Bezel: Designed to easily snap on, the bezel conceals all mounting hardware for a clean, seamless finish. Unlike a powder-coated finish, it resists fading and flaking over time, even in the toughest saltwater environments. Plug-and-Play: Engineered with a footprint similar to most standard spreader lights, allowing for easy installation without the need for custom modifications. What's In The Box? Flush-Mount Low Pro™ Spreader Light 3/16 Stainless Steel Mounting Screws

Read more less

4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 0.35 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”  Mounting Holes: 5-5/8” apart horizontally In the Box: 4” marine white flush mount spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual Specifications: Bulb Watts: 40 LED: Yes Box Dimensions: 5"H x 5"W x 7"L WT: 1.35 lbs UPC: 850044517268

Read more less

2" Marine Flush Mount Spreader Light - Black Housing - Pro Series 3.0READY FOR ANYTHING! This 2-inch flush mount LED light bar is the perfect addition to any hardtop for the boater in need of deck lighting. The 2 inch black marine flush mount spreader light throws light at a 120 degree beam angle, giving users extremely widespread dispersion without a hot spot, and is perfect for area lighting when fishing at night or getting ready early in the morning.With the flick of a switch, users can see that this marine spreader light is built with quality parts. From the moment users put this Black Oak 2 Inch Black Marine Flush Mount Spreader Light in their hand, it becomes completely clear how this spreader light can take the beating Black Oak claims it can. This small light bar comes complete with a wiring pigtail and everything needed to mount and get going!Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Golf cart lighting Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine black spreader light Wiring pigtail with deutsch connector  All hardware, ready to install! *Sold as an Individual Specifications: Bulb Watts: 20 LED: Yes Box Dimensions: 5"H x 5"W x 5"L WT: 0.85 lbs UPC: 850044517138

Read more less

D-Series PRO Hybrid-Spot LED - Pair - WhiteThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid-Spot Color: White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 10° Spot Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10M: 721.97 Beam Distance: 268.7M Peak Beam Intensity: 72197 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 6"H x 7"W x 9"L WT: 4.1 lbs UPC: 849774027260 Brochure (pdf)

Read more less

Chase - AmberThe Chase rear facing LED light adds safety and functionality to any UTV, rail, buggy, Jeep, or other off-road application by packing reverse, courtesy, strobe, running, and brake lights into a single compact package. A halo of powerful colored LEDs in red, amber, or blue around the perimeter of the aluminum housing can be used as a strobe (for racing and chase applications), running light, or third brake light. The center portion of the RIGID Chase functions as a 715 lumen white light suitable for use as a reverse or area light, and there’s also a smaller downward-facing courtesy light for illuminating the cargo area. Whether it’s used individually or wired in series, the RIGID Chase LED light is packed with features at a great value.Features: Halo Features 3 Modes; Strobe, Running, Brake 1.75” - 2.00” Adjustable Tube Mount Integrated High Efficiency Aluminum Heat Sink 715 Lumen Rear Facing White LED Reverse/Area Light 168 Lumen Down Facing Courtesy/Cargo Light Specifications: Bulb Watts: 10w LED: Yes Box Dimensions: 7"H x 7"W x 9"L WT: 2.25 lbs UPC: 815711015522 Quick Guide (pdf)Brochure (pdf)

Read more less

Bracket Mount Spreader Light - Black Housing - WhiteThe Shadow-Caster 4X Bracket Mount Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The bracket mount version is great for retrofitting existing installations. The Shadow-Caster parabolic reflector design offers a 60-degree beam. It is available in a single color white. The brightness can be controlled with a standard switch or Shadow-Caster Light Commander controller and NMEA 2000 interface.Features: Soft start technology ramps the brightness up gently over 2 seconds Power toggle feature to set brightness Cool white color temperature LED for best performance High-efficiency switch mode power supply Waterproof aluminum housing Unique reflector design to reduce glare Specifications: 3000 lumens output 60-degree beam angle 20-watt power draw 10-30 volts input Current draw: 1.5 amps 6200 Kelvin cool white color temperature 4.25” (108mm) overall length X 1.6” (41mm) width X 2.8” (71mm) height IP67 waterproof design Durable glass lens Includes: Spreader light 3’ (1m) submersible grade cable SS 316 bracket Standard 3-year warranty Quick Guide (pdf)Brochure (pdf)

Read more less

10W Slimline LED Floodlight, 120VAC Only, Cool White, 1200 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications: Power: 12W Voltage Range: 120VAC (108-132VAC - 60Hz) Output: 1200 Lumen, 4000K, >80CRI Dimensions: 130 (5.1”) W x 91 (3.6”) H x 28 (1.1”) D Specifications: Bulb Watts: 12w Voltage - Input Range (Volts): 108-132v LED: Yes Box Dimensions: 2"H x 7"W x 10"L WT: 1.1 lbs UPC: 850001461047 Brochure (pdf)

Read more less

Maxillume h60 - Trunnion Mount Flood Light - White Dimming - WhiteHousingCustomers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.Specifications: Lumens (White): 6000 Voltage: 10-30V DC 12V DC Amps: 5A 24V DC Amps: 2.5A Rated Watts: 60 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 8.3in (21.08cm) Depth: 2.6in (6.6cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 60w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 5"H x 5"W x 10"L WT: 2.4 lbs UPC: 089300013347

Read more less

Flush Mount Double Beam Halogen Spreader LightModule 6213 Halogen Double Beam Flush Mount Work Lamp (CR). Features: High Quality HELLA Work Lamps Hella quality and performance Over 100 years of excellence in automotive lighting

Read more less

Zephyr LED Spreader/Deck Light - Brushed White Base - White Non-DimmingLumitec's spreader light is equally well suited to lighting the foredeck of an elegant sloop or the cockpit of a sport yacht. Mounted on spreaders, spars, radar arches or towers and flybridges at a mounting height of 16 feet, our spreader light brightly illuminates an area nearly 24 feet in diameter with more than 1,000 lumens+. Positionable, sleek and versatile with unsurpassed reliability - meaning no more costly and complex bulb replacements.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 4.49in (11.41cm) Depth: 2.83in (7.20cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 089300013255

Read more less

2x2 115° - DC Scene Light - BlackDeveloped specifically for First Responders and Rescue personnel, LED Scene Lighting by RIGID is an efficient way to light up any area. Available in a variety of sizes and configurations to accommodate different needs and uses, Scene Lighting utilizes the latest in LED technology in a rugged RIGID branded housing that incorporates a thermally optimized heat sink for prolonged, trouble-free use. Scene Lights provide up to 115° horizontal spread for maximum coverage and heavy-duty mounting brackets that enable precise adjustable aiming. Whether it's the scene of a fire or a remote pit in Baja, Scene Lighting provides clear, bright light with minimal amp draw. RIGID's Scene lights are also available with a durable white finish. Though suitable for marine applications, RIGID's white lighting products are perfect for use anywhere an alternative to black is desired. The distinctive white is a durable UV-resistant powder coated finish with an additional chromate conversion coating for superior corrosion resistance. They feature the same legendary lighting technology and superior build quality as the rest of RIGID's lighting products, providing reliable and efficient lighting on demand.Features: DC Power Thermally optimized heatsink technology Extreme Output Minimum Amp Draw for the total lighting solution 115-degree horizontal spread Specifications: Watts: 37 Amp Draw: 2.78 LED's: 4 Raw Lumens: 4000 Lux @ 10m: 12.4 Peak Beam Intensity: 2143 cd

Read more less

Sea Hawk XL Dual Color LED Floodlights - Blue/White LED - Black HousingProfessional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Housing Material: Thermally conductive polymer housing Lens Material: Heavy duty Grilamid lens Bracket Material: 316 Stainless Steel Operating Voltage: 9-33V DC Power Consumption: White LEDs <12W, Red <2W, Blue <4W Light Output: 750 lumens Color Temperature: 5000K (White) Degree of Protection: IP 67 - Completely Sealed Cable: Pre-wired with 2.5M of tinned marine cable Approvals: CE Specifications: Voltage - Input Range (Volts): 9-33v LED: Yes Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 9416325243168

Read more less

LED Deck Light - White Housing - 1200 LumensHella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night!Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is a 1200 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust.Hella marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life.Features: Deck floodlight for surface mounting Low profile design Close-range illumination 1200 lumens Energy-efficient and durable LED technology Specifications: Housing Material: Die-cast aluminum, CoroSafe coating Lens: Widespread diffuser Mounting: Surface mount Lumen: 1200 lumens Color Temperature: 6500K (White) Cable: Pre-wired with 500mm cable Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC Power Consumption: 14W Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion) IP 6K9K (Protection against dust and high-pressure/steam jet cleaning) Weight: 600g (including cable) Approvals: ECE-R10, RCM, ADR/ GGVSEB Specifications: LED: Yes Box Dimensions: 2"H x 3"W x 12"L WT: 1.45 lbs UPC: 9002920164177 Owner's Manual (pdf)

Read more less

ML-1 LED Spreader/Deck LightForespar® now offers two mast light systems of superior quality. Model ML-1 is a deck light designed primarily for installation on the mast just below the spreaders. Model ML-2 is a combination deck-steaming light with separate switching, to be mounted on the forward part of the mast.The ML-1 and ML-2 lights feature a durable molded polymer housing assembly with a readily adaptable wraparound mounting apron to accommodate virtually any mast surface curvature. For 12V systems. Replacement bulbs are available from Forespar® and most marine dealers.Features: Lightweight Rugged Composite Material Adaptable to Mast Radius of Ease in Mounting 20W Adaptable to Mast Radius of Ease in Mounting 20W Easily Replaceable Halogen Type Bulb 1.4 amps Weighs 4 oz. – Measures 3-5/8” Vertically Provided with 6” of Twin-Lead Wire Molded Body Available in black finish only Replacement bottom ring for NL-1 & 2 Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only. Protect your mast lights from sails and birds

Read more less

D-Series PRO Hybrid-Spot LED - Pair - BlackThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid - Spot Color: White Finish Color: Black Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 10° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10m: 721.97 Beam Distance: 268.7 m Peak Beam Intensity: 72197 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 7"H x 7"W x 9"L WT: 4.1 lbs UPC: 849774026942 Brochure (pdf)

Read more less

Sea Hawk-470 Pencil Beam Light Bar with White Edge Light & White HousingThis light bar combines long-distance light performance, capable of picking out even the most distant objects, and a striking Edge Light. An edge light has been integrated into this powerful long-distance light bar to give a distinctive glowing signature while providing gentle ambient lighting. This edge light comes in white to give a vessel a unique appearance.The Sea Hawk-470 is synonymous with performance and durability. New optics have now enhanced the spotlight function while retaining the durable corrosion-proof housing and ultra-tough Grilamid® lens. The heavy-duty Grilamid® lens offers an unbeatable combination of properties including toughness against impact, long-term UV stability, and resistance to commonly used chemicals and washes. Grilamid® will not lose its luster or embrittle over time and will remain clear for the product's life.Proudly designed and manufactured in New Zealand, the Sea Hawk-470 carries a 5-year warranty. When outstanding light intensity and proven reliability are needed to get home safely, the Sea Hawk-470 Light Bars are the preferred choice.Features: White housing and white-edge light The unique corrosion-proof housing provides exceptional durability and long-term reliability (the thermally conductive polymer housing draws heat from internal electronics for reliable operation) Multivolt™ circuitry means the dual-function lamp can be used on 12V or 24V DC, while only consuming 36W on the pencil beam The adjustable mounting system ensures easy installation and flexibility for any orientation (can be mounted upright or pendant) Specifications: Mounting: Upright or pendant Voltage: Multivolt™ 12/24V DC Maximum Power Consumption Pencil Beam: 36W (2.7A @ 12V / 1.4A @ 24V) and Edge Light: 4W (300mA @ 12V / 150mA @ 24V) Maximum Luminous Intensity: 113,000 candela Light Performance: 1 Lux @ 330m Beam Angle: 8° x 4° Protection: Reverse polarity and transient spike protection, IP 6K7 (Protection against dust and temporary water immersion), IP 6K9K (Protection against dust and high-pressure/steam jet cleaning) Cable Length: Pre-wired with 2.5m of tinned multi-core cable Lens Material: Heavy-duty Grilamid® Bracket: Polished 316 stainless steel Compliance: CE ECE R10 UKCA Specifications: Bulb Watts: 36w LED: Yes Voltage - Input Range (Volts): 12/24v Box Dimensions: 2"H x 4"W x 20"L WT: 2.55 lbs UPC: 9416325252597

Read more less

Caprera3 Spreader Light - Spectrum - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Zephyr LED Spreader/Deck Light - Brushed, Black Base - White Non-DimmingLumitec's spreader light is equally well suited to lighting the foredeck of an elegant sloop or the cockpit of a sport yacht. Mounted on spreaders, spars, radar arches or towers and flybridges at a mounting height of 16 feet, our spreader light brightly illuminates an area nearly 24 feet in diameter with more than 1,000 lumens+. Positionable, sleek and versatile with unsurpassed reliability - meaning no more costly and complex bulb replacements.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 4.49in (11.41cm) Depth: 2.83in (7.20cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 5"H x 5"W x 5"L WT: 0.6 lbs UPC: 089300013262

Read more less

2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Front bumper lighting for trucks and Jeeps Reverse lights Work lights Headache rack lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height): 4-7/8" x 3-5/8" In the Box: 2” flush mount pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Bulb Watts: 40 Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517107

Read more less

Caprera3 Spreader Light - White Non-Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Chase - RedThe Chase rear facing LED light adds safety and functionality to any UTV, rail, buggy, Jeep, or other off-road application by packing reverse, courtesy, strobe, running, and brake lights into a single compact package. A halo of powerful colored LEDs in red, amber, or blue around the perimeter of the aluminum housing can be used as a strobe (for racing and chase applications), running light, or third brake light. The center portion of the Rigid Chase functions as a 715 lumen white light suitable for use as a reverse or area light, and there’s also a smaller downward-facing courtesy light for illuminating the cargo area. Whether it’s used individually or wired in series, the Rigid Chase LED light is packed with features at a great value.Features: Halo Features 3 Modes; Strobe, Running, Brake 1.75” - 2.00” Adjustable Tube Mount Integrated High Efficiency Aluminum Heat Sink 715 Lumen Rear Facing White LED Reverse/Area Light 168 Lumen Down Facing Courtesy/Cargo Light 3 Halo Color Options; Amber, Red, & Blue Specifications: Bulb Watts: 10w LED: Yes Box Dimensions: 7"H x 7"W x 9"L WT: 2.15 lbs UPC: 815711015959 Quick Guide (pdf)Brochure (pdf)

Read more less

Eagle Ray LED Light Bar - White Housing & Dual OpticsUtilizing automotive lighting technology and novel beam shaping optics, Shadow-Caster has created the Eagle Ray – a unique light bar with a combination of focused laser-driven white light beams and a wide 60-degree LED flood array to efficiently light the way.The focused white lights are ideal for long-distance viewing and penetrating fog, rain, and mist. The beam angle and brightness are adjustable with a push button or the Shadow-Caster® NMEA 2000 Light Commander interface.Laser Features: Automotive-grade laser-driven white lights Blue halo illumination around optics indicates a power state Adjustable 5-100° beam angle control with a switch or MFD interface Flood Features: 24 bright white LEDs Blue accent light strips indicate the brightness level 60-degree beam angle Adjustable brightness control with a switch or MFD interface Technical Information: 20,000 lumens Billet Aluminum housing in white finish Remote power trigger to provide simpler installation (main current supply is not controlled through a switch) Borosilicate glass window 10-30V input 200W max power 16.5A current draw at 12V DC 2.5” H x 20” W x 5.4” D [65.3 x 506.5 x 136.9mm] Control OptionsOn/off Push ButtonsClick the on/off button to turn the laser/flood lights on. Press and hold the button to adjust the beam angle (laser) or brightness (flood). Click the on/off button to turn the laser/flood lights off.Standard Marine Rocker SwitchClick the rocker switch up/down button to turn the laser/flood lights on. Press and hold the switch up/down to adjust the beam angle (laser) or brightness (flood). Click the rocker switch up/down button to turn the laser/flood lights off.Shadow-NET®/ NMEA 2000 ControlFull feature control through a Multi-Function Display (MFD). The Shadow-NET® Light Commander allows for easy and independent control of brightness and beam angle for the Eagle Ray Light Bar. Create and store pre-configured light settings for use as part of a lighting ‘scene’ for convenience at night.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Box Dimensions: 5"H x 8"W x 22"L WT: 10.95 lbs UPC: 8500563200548 Owner's Manual (pdf)Brochure (pdf)

Read more less

D-Series PRO Hybrid-Diffused LED - Pair - WhiteThe D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.Features: Optics: Hybrid-Diffused Color: White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.3lb Sold As: Pair Hybrid Optics 60° Diffused Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Sealed Deutsch Connector Specifications: Watts: 30 Amp Draw: 2.14 LED's: 4 Raw Lumens: 3168 Lux @ 10M: 20.6 Beam Distance: 45.4M Peak Beam Intensity: 2060 cd Specifications: Bulb Watts: 30w LED: Yes Box Dimensions: 6"H x 7"W x 9"L WT: 4.1 lbs UPC: 849774027277 Brochure (pdf)

Read more less

Ignite Flush Mount Flood - BlackMost vehicles have very inadequate backup lighting, which can be a major safety problem. RIGID makes it easy to add compact and powerful backup lighting to any vehicle with the RIGID Ignite™ Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4” x 1.4” x 2”. The Backup Light Kits are available with a pair of either flush mount or surface mount Ignite lights along with mounting brackets and related hardware. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicle’s existing backup lighting circuit.Features:Available in Black Only RIGID’s Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Available only in Diffused RIGID Quality & Performance Smallest Flush Mount Light that RIGID Offers Easy Install Specifications:  Watts: 12 LED's: 1 Raw Lumens: 1000 Lux @ 10m: 9 Beam Distance: 59.5 m Peak Beam Intensity: 884.5 cd Specifications: Bulb Watts: 12w LED: Yes Box Dimensions: 2"H x 6"W x 8"L WT: 0.7 lbs UPC: 849774014994 Brochure (pdf)

Read more less

Capri3 Spreader Light - Spectrum - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Caprera3 Spreader Light - Spectrum - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Capri3 Spreader Light - White Non-Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

LED Rectangular Flood Light - 1500 LumensThis marine grade LED Flood Light is constructed with a power coated aluminum housing with a stamped 304 stainless steel bracket. 6 super bright LEDs produce 1500 lumens. Low amp draw. 9-36V. IP67 waterproof rating.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED Deck Light - White Housing - 2500 LumensHella Marine introduces the low profile and powerful FMS LED deck lamps. These surface-mount scene lamps are purpose-designed to integrate discreetly in tight spaces and exterior recesses yet throw a huge amount of light wherever they are installed. With a protrusion of only 38 mm, the FMS-Lamps are sleek and unobtrusive during the day but make themselves very well-known at night!Two light intensities are offered: the FMS1200 with 1200 lumens; and the FMS2500 with an even more powerful 2500 lumens. This light is the 2500 lumens option, but both lamps offer even close-range illumination directly underneath the lamp. The light is projected downwards at a fixed angle of 45 degrees, with no brackets to adjust.Hella Marine LED technology is the answer for energy-efficient, completely sealed, shock and vibration-resistant lighting. Advanced electronics provide consistent illumination and circuit protection across a range of inputs from 9–32VDC for a long service life.Features: Deck floodlight for surface mounting Low profile design Close-range illumination 2500 lumens Energy-efficient and durable LED technology Specifications: Housing Material: Die-cast aluminum, CoroSafe coating Lens: Widespread diffuser Mounting: Surface mount Lumen: 2500 lumens Color Temperature: 6500K (White) Cable: Pre-wired with 500mm cable Operating Voltage: Multivolt™ 9-32V DC, Nominal 12/24V DC Power Consumption: 28W Degree of Protection: IP 6K8 (Protection against dust and prolonged water immersion) IP 6K9K (Protection against dust and high-pressure/steam jet cleaning) Weight: 600g (including cable) Approvals: ECE-R10, RCM, ADR/ GGVSEB Specifications: LED: Yes Box Dimensions: 3"H x 3"W x 12"L WT: 1.45 lbs UPC: 9002920164184 Owner's Manual (pdf)

Read more less

SCM-SL Series Bracket Mount Spreader Light - White Housing - Full-ColorThe Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Read more less

Maxillumeh60 - Flush Mount Flood Light - White Housing - White DimmingCustomers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, new mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.Specifications: Lumens (White): 6000 Voltage: 10-30V DC 12V DC Amps: 5A 24V DC Amps: 2.5A Rated Watts: 60 CCT: 5000 CRI: 70+ Length: N/A Width: 8.3in (21.08cm) Depth: 2.6in (6.6cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 60w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 5"W x 10"L WT: 2.2 lbs UPC: 089300013361

Read more less

D-SS Series Pro Driving Surface Mount - Pair - BlackOne of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.Features:  Up to 50,000+ Hour Lifespan IP68 Compliant Impact Resistant Lens GORE® Pressure Equalizing Vent Harness & Switch Included Mounting Brackets Included Specifications:  Watts: 72 Amp Draw: 5.14 LED's: 9 Raw Lumens: 7128 Lux @ 10m: 281.08 Beam Distance: 167.7 m Peak Beam Intensity: 28,108 cd Specifications: Bulb Watts: 72w LED: Yes Box Dimensions: 7"H x 7"W x 14"L WT: 4.65 lbs UPC: 849774027475 Brochure (pdf)

Read more less