High Bilge Water Alarm - Surface Mount - BlackFeatures: Visual and Audible Alarm Indicator Dual signaling before maximum bilge water conditions exist, sounds an alarm & activates warning light Marine Proven Exclusively designed for the harsh marine environment Sensor has been used in bilge's for over 15 years, not effected by fuel spills or other chemicals Float Sensor Monitors bilge for high water Will not false alarm from morning dew, high humidity, splashes, hose over spray or buildup of oil or contamination Microprocessor controlled Eliminates false alarms from rough seas, chop and vibrationTest/Mute button Tests alarm with a push of a button. Mutes alarm while boater investigates the problem Easy installation Install at the helm or in the cabinCompliant with ABYC Standard H-22 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Solenoid/Anti-Syphon Valve - 12VSpecifications: Solenoid valve for use with Quiet Flush fresh water toilets inline normally closed solenoid valve Supplied with 1/2" (15mm) JG Speed fit connections, 1/2" (15mm) hose barb inlet, 3/4" (19mm) Hose barb outlet Double check valve to protect against contamination of potable water Internal inlet filter Volts: 12V DC Mountable in any orientation, above or below the toilet mounting bracket included Compatible with the Jabsco toilet series 37045, 37055, and 37075 toilets

Read more less

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features machined fittings and strain-relief ends for added durability. Drinking water safe.

Read more less

Straight Fitting Wingnut Swivel - 1/2"-14NPT(F) x 5/8"BarbCustomize a SHURFLO pump to fit your system. Fittings accommodate all SHURFLO pumps with 1/2"-14 threads Finger-friendly wingnut hex style easily threads onto port Two per package This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Hold Down Kit for Small Porta PottiThis hold-down kit will fit Thetford Porta Potti model numbers 92868, 92865, 92871, 92859 and 92862This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Drain Valve Lubricant - Bilingual - 24oz Features: Prevents sticky valves Restores operation Coats plumbing lines for smooth tank outflow Works in both grey and black water tanks Lubricating additive

Read more less

Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features: Replaces worn out flapper scuppers 70% more drainage than competitive models Twist off for easy cleaning Retrofits all hole patterns The seal is slotted to fit over 1-1/4" motor well tubes 3” Diameter x 2-1/2” H The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it.  They will be different for every boat depending on the hull thickness but you will need a flat head screw.  Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (1-1/16" – 1-1/2") Clamping Range - 10-Pack - SAE Size 16Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 16 Hose Inner Diameter: (inch) 7/8" – 1" Clamping Range: (inch) (1-1/16") – (1-1/2") / (mm) 26-38 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

Joker ValveRaritan's Joker Valve toilet replacement part.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 085462005138

Read more less

PURASAN® EX Refill Tablets *1 Tub of 6 TabletsA concentrated chlorinating and brominating agent for use as bactericide and disinfectant in the PURASAN Type 1 Marine Sanitation Device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Chrome Compact Shower Control Mixer - Single LeverThis part is a compact single-lever shower mixer.Features:Flexible 3/8 in. BSP-M output line for hose connectionSpecifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome-plated brass Mounting Hole: 1-1/4 in. Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

Clamping Ring Kit for Gulper 220Features: Includes both halves of the clamping ring and 2 screws Specifically for Whale Gulper 220 Shower/Waste Pump

Read more less

Elegance Combination Pull Out Mixer Faucet/ShowerLightweight and durable ABS Pull out showerMade from lightweight and robust marine grade materialsIdeal for tight spaces.Simply fit one unit including faucet and shower in one. Features Robust ABS construction Design for use with all types of galley pumps Connects to Whale Quick Connect 15 mm pipework/ 3/8" or 1/2" hose connections Standard and extended spout models available Choice of single or mixer faucets Designed, refined and made in our UK facility since the early 1980s WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Blow Out Plug - Plastic - Screws Into Water Inlet Completely clear your water lines with boat and RV blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate the air pump until all lines are clear.

Read more less

CM30P7-1 - 12V - Circulation Pump - Dia16Features: 12V, 5.3 GPM circulation pump Compact, magnetic driven centrifugal pump High flow rate with very low electrical current consumption Suitable for fresh water, ethylene glycol and salt water

Read more less

Thermostatic Mixing Valve Kit for Nautic Boiler B3A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The Quick thermostatic mixing valve is suited perfectly for the Quick and Sigmar brand of water heaters. This kit is sold complete with the valve, hose , and fittings.For use with Quick Nautic Boiler B3.

Read more less

Sonic Grease Single Use Packet *4-PackMopeka Sonic Grease is applied to the sensor face to improve ultrasonic performance. This is a 4-pack of 1cc single-use units.Note: All sensors are shipped with 1 grease pack. Order this package for use when sensors must be removed from the tank frequently, or when grease has otherwise been removed from the sensor. Specifications: Type: Parts Box Dimensions: 1"H x 3"W x 4"L WT: 0.01 lbs

Read more less

800W Heating Element for Sigmar Heater- 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod Specifications: Type: Parts Box Dimensions: 2"H x 2"W x 12"L WT: 0.9 lbs UPC: 8057090079579

Read more less

Gusher® Galley MK3 Service KitService Kit with Complete Set of Serviceable Parts for Whale Gusher® Galley MK3.Includes: Small O-ring (2) Valve (4) Valve stem (4) Large O-ring (4) Self tapping screw (4) Sealing washer (1) Diaphragm (2)

Read more less

KlickTite 2 x 90 - 3/4" HoseAllows draining of the system quickly and effortlessly. 

Read more less

Mounting Collar for PRO+ Sensor Aluminum Fuel TanksFeatures: Mopeka Tank Mounting Collar for PRO+ Residential and Bulk Tanks Pre-Applied Adhesive Works with Bulk and Residential Sensors Easy On and Off Lid for Sensor Service

Read more less

Sta-Plug® Mini Emergency PlugThe Sta-Plug® Mini™, Forespar's form-fitting emergency plug. A soft cone-shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull. Unique edge gripping riblets help hold the plug in a hole, keeping water out.Features: The Emergency Plug that Grips 4" High x 2" Diameter Convenient sized version of the popular Sta-Plug Emergency Plug Made from strong elastomer composites  Not susceptible to mold or swelling Bright color allows it to be quickly located Meets US Sailing Special Equipment Requirements Equipped with a lanyard hole Dimensions: 4" (10cm) high, 2" (5cm) diameter at base Made right here in the USA NOT INTENDED FOR FUEL LEAKS

Read more less

MF 840 Vented Loop - 1-1/2"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/2" (38.1mm) Height: 5-1/4" (133.35mm) Width: 7-3/4" (196.85mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 6"W x 8"L WT: 0.45 lbs UPC: 028026148711

Read more less

Motor Group 12V for Silent Electric ToiletsJohnson Pump's 12V motor group (silent electric).

Read more less

CM30P7-1 - 12V - Circulation Pump - Dia20Features: 12V, 6.9 GPM circulation pump Compact, magnetic driven centrifugal pump High flow rate with very low electrical current consumption Suitable for fresh water, ethylene glycol and salt water

Read more less

Mounting Collar for Pro Check Sensor Plastic Holding TankCollar set used with Pro Sensors on flat-bottom, non-magnetic tanks. Includes pre-applied adhesive and prep materials. Note: The collar for flat-bottom tanks differs from the collar for LPG Tanks. The LPG collar is angled where it attaches to the tank to match cylinder curvature, whereas this collar has a flat flange. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 4"L WT: 0.05 lbs

Read more less

Mounting Collar for Pro Check Sensor LPG Aluminum TankCollar set used with non-magnetic and magnetic Pro Sensors, on aluminum DOT cylinders or steel tanks. Includes pre-applied adhesive and prep materials. Note: The collar for LPG cylinders differs from the collar for flat-bottom tanks. The LPG collar is angled where it attaches to the tank to match cylinder curvature. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 5"L WT: 0.05 lbs

Read more less

Marine Elegance Pancake Motor Replacement - 24VMarine Elegance Motor Pancake E-Coated 24 Volt replacement.

Read more less

Nano Touch Raw Water Fitting KitRaw water fitting compatible with Nano Touch SFT macerating toilets.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 6"W x 8"L WT: 0.1 lbs

Read more less

Heater Element 120V, 800WHeater element that fits all Albin Pump Marine water heaters. 850W allows to use water heater at 120V with a 10A fuse.Specifications: Type: AC 120V Certifications: CE marked (LVD) directive 2006/95/EC, EN 60335-1 (2008), EN 60335-2-21 (02-2004), A1 (07-2005), EC (01-2008). (EMC) directive: 2004/108/EC, EN 55014-1 (1999), A1 (2000), A2 (2003), EN 55014-2 (1998), A1 (2002)

Read more less

CM10P7-1 - 12V Circulation PumpFeatures: 12V, 4.0 GPM circulation pump Compact, magnetic driven centrifugal pump High flow rate with very low electrical current consumption Suitable for fresh water, ethylene glycol and salt water

Read more less

Lower Housing Replacement Kit - 3.0 CAMIncludes diaphram and drive assemblyFor the Following Pumps: Silencer - 12VDC Premium - 12VDC Standard Blaster™ - 12VDC Standard Blaster™ - 24VDC ProBlaster™ - 12VDC Pro Baitmaster™ - 12VDC Pro Baitmaster™ - 24VDC This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Service Kits Box Dimensions: 2"H x 7"W x 9"L WT: 0.7 lbs UPC: 752324001200

Read more less

Nano Touch Solenoid Invensys Kit - 12VThetford's Solenoid Invensys Kit is for use with Thetford's Touch SFT Kits.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Active Carbon FilterPrevents outside odor coming from tank by connecting it at the highest point along the breather hose.Specifications: Weight: 0.15 kg/.25 lbs Type: Black water Adjustable Ports: With 16, 19, & 25mm / (3/8″, 3/4″, 1″)  *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Read more less

Touchpad Flush Switch - BlackDometic Flush Switch Touchpad for either the MasterFlush Macerator or electronic VacuFlush toilets with an Ethernet connection. Works with either 12V or 24V. Comes with an Ethernet cable.

Read more less

Thermostat for Nautic BoilersReplacement thermostat for Quick brands of water heaters.Features: 15 Amps 270mm

Read more less

1200W Heating Element for B3 & Sigmar Heaters - 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod Specifications: Type: Parts Box Dimensions: 2"H x 2"W x 12"L WT: 0.9 lbs UPC: 8057090079593

Read more less

Quick Pressure Relief Valve for All Sigmar & B3 Heaters Pressure Relief Valve - 1/2" fitting, brass chrome plated, pressured up to 6 bars Bristish standard thread fitting Overall length 1-3/4" Relief/non return that allows discharging of the water heater in case of disuse Specifications: Type: Parts Box Dimensions: 1"H x 8"W x 8"L WT: 0.35 lbs UPC: 8057090079678

Read more less

Pump Service KitService kit for GROCO SPO Series Pumps made after September 2001.What's Included? Rotor, 8-Slot (SP-99-A) Blades (8) (SP-98) O-ring (2-034) Snap ring (SNAP RING-1) Seal assembly (69089)

Read more less

Quad-Stage Bacteriostatic KDF/Carbon In-Line City Water Entry Filter with Garden Hose EndsAll filtration systems are not created equal. With so many choices in water filtration, how do users know which filter is best for them? Do users know the quality of the filtration media that hides behind the walls of a filter? When looking for a reliable filter, Pentair has the solution. Pentair uses only the highest quality filtration media in its Waterguard™ filters. Pentair two-stage water filters significantly reduce chlorine, taste, odor, and sediment, providing users with crisp, clean, and safe drinking water.This particular filter is a long-life, triple-stage carbon in-line city water entry filter with garden hose ends.Specifications: Micron Rating: 5 Fittings/Port Size and Accessories: 3/4” (19mm) garden hose ports Maximum Flow Rate: 2.5 GPM (9.5 LPM) Filters up to 11,000 gallons (41,000 L) Pressure (Minimum Maximum): 20/125 PSI (138/862 Bar) Filter Size & Fittings: 11" (279mm) filter with GAC and KDF, male/female garden hose end This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Service Kit F4B-8 -9Johnson Pump Service Kit specifically for F4B-8 and F4B-9.

Read more less

Transom Shims

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (7/8" – 1-1/4") Clamping Range - 10-Pack - SAE Size 12Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 12 Hose Inner Diameter: (inch) 5/8" – 1-1/8" Clamping Range: (inch) 7/8" – 1-1/4" / (mm) 22-32 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

90° Discharge AdapterRaritan's 90° Discharge Adapter includes a flange and is for Straight to 90°.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 6"L WT: 0.3 lbs UPC: 085462000553

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15/16"  / (mm) 15-24 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (5/8" – 15/16") Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15-16" / (mm) 15-24 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1-1/8" / (mm) 19-28 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

2-Way Waste Manifold - 12' Cable - 3/4" PortsThis manifold manages waste from multiple drains with intelligent control built in. A compact automatic system handles waste drainage from the two outlets. Must be used with Gulper® IC.The two-way manifold IC is connected to a Gulper® IC. When the manifold senses water, it sends an electrical signal to the Gulper® IC, which evacuates the system. As the water level decreases, the electrical signal transmitted by the manifold will cease, and the Gulper® IC will continue to operate for a further 15 seconds before turning off. IC – Intelligent Control TechnologyAt the heart of every Whale IC product lies innovative electronic control circuitry built in. This enables the IC sensor accessories to communicate directly with the IC pumps to control the performance. These accessories send signals to built-in intelligent software, which then controls the pumps to react as required.Specifications: Cable Length: 4m (12ft) Inlet Hose Connections: 3/4" (19mm) Outlet Hose Connections: 3/4" (19mm) Control Voltage: 5V dc via Gulper® IC Current Draw: Low power 0.01 Amps supply Connectors: Deutsch® Connectors: Quick Connect Series 7 ways (directly onto Gulper® IC) Specifications: Inlet Size: 3/4" Operation Method: Electric Outlet Size: 3/4" Box Dimensions: 6"H x 6"W x 6"L WT: 1.4 lbs UPC: 766478944931

Read more less