TH Marine Single Finger Flex Blinker Style Trim SwitchModel: FF-BT-SS-SDP No Wheel Removal Required Wrap Around Bracket Installs in Minutes Positive Clicking Technology for Positive Touch Also Operates Power Jack Plates T-H Marine offers the answer to convenient trim control for hydraulic helms ... FingerFlex™. Simple and easy to install, this unit can be added to any boat in minutes ... by anyone. No need to remove your steering wheel...Simply wrap the locking collar around your bezel and attach two nuts and bolts. Run the attached wire through the dash and connect into trim system wiring harness...DONE!FingerFlex™ incorporates "Positive Clicking" technology that provides positive touch and feel so, unlike similar systems, you know when your trim is operating...that’s important when you really need it!FingerFlex™ can be installed on the right or left side of the bezel or both for dual controls. Can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.

Read more less

TH Marine G-Force Grass GoatModel: GFGG-MKL-DP Keeps your trolling motor clear of debris Genuine Marine grade Starboard Mounting Plate Stainless Steel Cutting-Blade A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.Specifications Description Minn Kota (largel)

Read more less

TH Marine Dual Control FingerFlex "Blinker Style" Steering Wheel Trim SwitchModel: FFBT-DSS-DP Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation T-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex it can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.

Read more less

TH Marine 48" Zippered Rigging SleeveModel: ZRS-1-DP Zips On and Off to Protect Cables and Hoses Rugged Sunbrella® — Weather & UV Resistant Ends are Secured with Cable Ties Protect your cables and hoses with this easy to remove rigging sleeve. Made of rugged Sunbrella® fabric, this sleeve will withstand the elements and resist fading. Easily zips on and off to access cables of hoses when needed. Ends are secured with cable ties sewn into pockets.

Read more less

TH marine MOTOR STIK™ Outboard Motor Support StickModel: MSS-1-DP Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water 8 1/2" Long Whether you refer to it as an H Bracket, a motor toter, a transom saver, or a motor support, this product will help save your boat and save your motor.NOTE - Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application

Read more less

T-H FLEX™ 3/4" Expandable Braided Sleeving, 100' SpoolModel: FLX-75-DP Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Read more less

T-H FLEX™ 1/2" Expandable Braided Sleeving, 100' SpoolModel: FLX-50-DP Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Read more less

T-H FLEX™ 1/4" Expandable Braided Sleeving, 100' SpoolModel: FLX-25-DP Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Read more less

T-H FLEX™ 2" Expandable Braided Sleeving, 50' SpoolModel: FLX-200-DP Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Read more less

T-H FLEX™ 1 1/2" Expandable Braided Sleeving, 50' SpoolModel: FLX-150-DP Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Read more less

T-H FLEX™ 1 1/4" Expandable Braided Sleeving, 50' SpoolModel: FLX-125-DP Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Read more less

TH Marine G-Force Eliminator Red Prop Nut for Lowrance Ghost MotorsModel: GFEL-MK-W-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Minn Kota 80-101-112 Color White

Read more less

TH Marine G-Force Eliminator Red Prop Nut for Lowrance Ghost MotorsModel: GFEL-LG-R-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Lowrance Ghost Color Red

Read more less

TH Marine G-Force Eliminator Black Prop Nut for Lowrance Ghost MotorsModel: GFEL-LG-BK-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Lowrance Ghost Color Black

Read more less

TH Marine G-Force Eliminator Red Prop Nut for Garmin Force MotorsModel: GFEL-GF-R-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Garmin Force Color Red

Read more less

TH Marine G-Force Eliminator Black Prop Nut for Garmin Force MotorsModel: GFEL-GF-BK-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending 1 One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Garmin Force Color Black

Read more less

TH Marine Z-LOCK™ 4" Manual Jack PlateModel: JPZ-4-DP Z-Lock™ Jack Plate Design Eliminates Side Slippage Matching slotted extrusions LOCK side plates in place Strong Aircraft Grade Aluminum Full ½" Material For Strength Handles All V6 Outboards up to 300 hp Easy to Adjust From Top of Jack 5" of Vertical Adjustment The excellence of T-H Marine's HI-JACKER™ jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

Read more less

TH Marine Pro Hi-Jacker™ Manual Jack Plate - 6" Setback, aluminumModel: JP-6PW-DP High Strength Aluminum — 3/8" Thick One-Piece Design — Top Adjust Locking Bars Allow One Wrench Adjust Maximum 175 HP Outboards 4" Vertical Adjustment 6" of Setback

Read more less

TH Marine Hi-Jacker™ Fixed Jack Plate 4 inch Heavy DutyModel: JP-4FAHD-DP Inexpensive Short Transom Fix Solid Aluminum Extrusion 3-Engine Mount Holes — 2-Transom Holes Total Vertical of 5-1/2 Inches — 4" Setback This tough 1/2" thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. Also great as a fixed jack plate for all V6 outboards. Handles all outboards up to 300 hp. Three engine mounting holes and two transom mounting holes combined with a 3" designed lift allows a total of 5 1/2" of lift with a full four (4) inches of setback.

Read more less

TH Marine Hi-Jacker™ Fixed Jack Plate 4 inchModel: JP-4FA-DP Inexpensive Short Transom Fix Solid Aluminum Extrusion 3-Engine Mount Holes — 2-Transom Holes Total Vertical of 5-1/2 Inches — 4" Setback This tough 3/8" thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. Also great as a fixed jack plate for all V6 outboards. Handles all outboards up to 150 hp. Three engine mounting holes and two transom mounting holes combined with a 3" designed lift allows a total of 5 1/2" of lift with a full four (4) inches of setback.

Read more less

TH Marine Hi-Jacker™ 6" Jack Plate Two PieceModel: JP-1A-DP 3/8" Aluminum — Two Piece Design Natural Aluminum Finish Dual Stainless Steel Adjustment Rods Maximum 150hP Outboards 6" Setback — 4" Vertical Lift T-H Marine revolutionized recreational boating with this first-to-the-market, full production jack plate. The Hi-Jacker™ Jack Plate is the most recognized brand name in the industry from the company that pioneered the product.This plate is constructed of tough 3/8" aircraft aluminum and features a design that allows full tilt with dual steering. Natural aluminum finish resists corrosion. All bolts are stainless steel with brass nuts to prevent galling. Fits all V-4 and V-6 engines up to a maximum of 150 Horsepower. Provides six (6) inches of setback and four (4) inches of vertical adjustment.

Read more less

TH Marine Z-LOCK™ 8" Manual Jack PlateModel: JPZ-8-DP Z-Lock™ Jack Plate Design Eliminates Side Slippage Matching slotted extrusions LOCK side plates in place Strong Aircraft Grade Aluminum Full ½" Material For Strength Handles All V6 Outboards up to 300 hp Easy to Adjust From Top of Jack 5" of Vertical Adjustment The excellence of T-H Marine's HI-JACKER™ jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

Read more less

TH Marine Z-LOCK™ 10" Manual Jack PlateModel: JPZ-10-DP Z-Lock™ Jack Plate Design Eliminates Side Slippage Matching slotted extrusions LOCK side plates in place Strong Aircraft Grade Aluminum Full ½" Material For Strength Handles All V6 Outboards up to 300 hp Easy to Adjust From Top of Jack 5" of Vertical Adjustment The excellence of T-H Marine's HI-JACKER™ jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

Read more less

TH Marine G-Force Eliminator Red Prop Nut for Minn Kota 35-70lb Thrust MotorsModel: GFEL-MKS-R-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Minn Kota Color Red lb Thrust 35-70

Read more less

TH Marine G-Force Eliminator Clear Prop Nut for Minn Kota 35-70lb Thrust MotorsModel: GFEL-MKS-C-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Minn Kota Color Clear lb Thrust 35-70

Read more less

TH Marine G-Force Eliminator Red Prop Nut for Minn Kota 80,101, and 112 lb thrust motorsModel: GFEL-MK-R-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Specifications Fits Brand Minn Kota Color Red lb Thrust For Minn Kota 80,101,112

Read more less

TH Marine G-Force Eliminator Clear Prop Nut for Minn Kota 80,101, and 112 lb thrust motorsModel: GFEL-MK-C-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Specifications Fits Brand Minn Kota Color Clear lb Thrust 80,101,112

Read more less

TH Marine G-Force Eliminator Red Prop Nut for Motorguide MotorsModel: GFEL-MG-R-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Motorguide Color Red

Read more less

TH Marine G-Force Eliminator Clear Prop Nut for Motorguide MotorsModel: GFEL-MG-C-DP Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Specifications Fits Brand Motorguide Color Clear

Read more less

TH Marine Hole Shot PlateFor 10" Atlas Jack PlateModel: AHJHSP-10V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Hole Shot PlateFor 8" Atlas Jack PlateModel: AHJHSP-8V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Hole Shot PlateFor 6" Atlas Jack PlateModel: AHJHSP-6V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Hole Shot PlateFor 4" Atlas Jack PlateModel: AHJHSP-4V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Hole Shot PlateFor 14" Atlas Jack PlateModel: AHJHSP-14V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Hole Shot PlateFor 12" Atlas Jack PlateModel: AHJHSP-T-12V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Hole Shot PlateFor 10" Atlas Jack PlateModel: AHJHSP-10V-DP Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

Read more less

TH Marine Steering TrimModel: TTC-1-DP Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates Transom Trim Control Switch / Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Specifications Description Transom Trim Control - 50 AMP

Read more less

TH Marine Kong Wave TamerModel: SKTM-F-R-DP Heavy gauge aluminum construction Protects electronics from extreme conditions Anodized finish—red Universal hole pattern fits most electronics brackets. Can easily be drilled for any other models. Allows electronics to be mounts in center of front deck behind trolling motor pedal Allows easy viewing while fishing from either side of boat Specifications Description Kong Wave Tamer Red

Read more less

TH Marine Kong Wave TamerModel: SKTM-F-BK-DP Heavy gauge aluminum construction Protects electronics from extreme conditions Anodized finish—black Universal hole pattern fits most electronics brackets. Can easily be drilled for any other models. Allows electronics to be mounts in center of front deck behind trolling motor pedal Allows easy viewing while fishing from either side of boat Specifications Description Kong Wave Tamer Black

Read more less

TH Marine Mini Kong MountModel: SKLK-SAST-DP Unique "DOWEL PIN LOCK" No Slip Joints Quick Release Spring Loaded Base Multi-Position Pivot Points in Base Easy to Adjust Wing Nut Locks on Joints Three Models to Fit Any Electronic Unit Annodized Aluminum with Stainless Fasteners Kong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.When your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.

Read more less

TH Marine Mini Kong MountModel: SKLK-NAST-DP Unique "DOWEL PIN LOCK" No Slip Joints Quick Release Spring Loaded Base Multi-Position Pivot Points in Base Easy to Adjust Wing Nut Locks on Joints Three Models to Fit Any Electronic Unit Annodized Aluminum with Stainless Fasteners Kong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.When your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.Specifications Description No arm - 6" top plate

Read more less

TH Marine Mini Kong MountModel: SKLK-LAST-DP Unique "DOWEL PIN LOCK" No Slip Joints Quick Release Spring Loaded Base Multi-Position Pivot Points in Base Easy to Adjust Wing Nut Locks on Joints Three Models to Fit Any Electronic Unit Annodized Aluminum with Stainless Fasteners Kong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.When your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.Specifications Description 5" arm - 6" top plate

Read more less

TH Marine Mini Kong MountModel: SKLK-LALT-DP Unique "DOWEL PIN LOCK" No Slip Joints Quick Release Spring Loaded Base Multi-Position Pivot Points in Base Easy to Adjust Wing Nut Locks on Joints Three Models to Fit Any Electronic Unit Annodized Aluminum with Stainless Fasteners Kong™ Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping, moving, shifting or smashing on your boat while running in any conditions. The Kong™ Mini was tested in the most severe conditions by top touring pros.When your day is done simply pull the spring loaded tab at the base to release the Kong Mini and your electronic unit from the base freeing it to be locked away and protected. The Kong Mini is made from anodized aircraft aluminum and stainless steel for strength and durability.Specifications Description 5" arm - 12" top plate

Read more less

TH Marine KVD Kong ExtremeModel: SKLK-KONG-1-DP Tames the largest beast of marine electronics Zero movement in the roughest water conditions Marine grade mount for freshwater or saltwater All 6061 T6 aircraft aluminum & SS The KVD KONG electronics mount is an extreme electronics mount. The KONG is the only electronics mount truly designed and built to give a rock solid, no movement mount for the largest and heaviest marine electronics.

Read more less