Drain Plug & Housing - Coarse Thread - Black NylonFeatures: 24mm(15/16") Hole Diameter Water tight seal Retaining legs UV Stabilized Nylon plug and housing Specifications: Color: Black/Red Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800041589

Read more less

Sail Slide - Internal Track - 16mm(5/8") Wide x 32mm(1-1/4") LongImpact Resistant, U.V. Stabilized NylonWhite Specifications: Color: White Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 9316800210770

Read more less

C-Cleat Cam Cleat - Medium - Black w/Black Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring Specifications: Color: Black Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800450787

Read more less

C-Cleat Cam Cleat - Medium - Grey w/Grey Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800191604

Read more less

Quick Link - 8mm(5/16") DiameterQuick Links have large openings and secure threaded locking sleavesGrade 316 Stainless Steel Specifications: Color: Stainless Box Dimensions: 1"H x 2"W x 3"L WT: 0.3 lbs UPC: 9316800040797

Read more less

Opening Luff Rope PrefeederFeatures: Single-handed operation by pushing on the spring Easy to install with a lashing or fixed to the forestay Can be installed below any headsail foil or headsail reefing configuration Stainless steel forged part Applications: Ideal for bowman operations No need to remove the headsail from the luff grove Enables to save time during operations Smooth and easy sail hoist Specifications: Materials 316 stainless steel grade Weight (lb) 0.11

Read more less

Asymmetric Carbine Hook - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 4-23/32" Working load (lb) 3170 WLL (lb) 1980 Breaking load (lb) 9920 Weight (lb) 0.516 Dimensions (see 2nd image): A (inch) 15/16" B (inch) 5/8" D diameter (inch) 15/32"

Read more less

Micro Cam-Matic Aluminum CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 26g / .93oz Minimum line: 2mm / 3/32in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 91kg/ 200lb Breaking load: 181kg / 400lb Pawls: Aluminum

Read more less

Standard Cam-Matic® Aluminum CleatAluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications: Height: 30 mm / 1-3/16 in Length: 65 mm / 2-9/16 in Width: 32 mm / 1-1/4 in Weight: 71 g / 2.5 oz Minimum line: 3 mm / 1/8 in Maximum line:12 mm / 1/2 in Fastener spacing: 38 mm / 1-1/2 in Fasteners: 5 FH mm / 10 FH in Maximum working load: 136 kg / 300 lb Breaking load: 340 kg / 750 lb Pawls: Aluminum

Read more less

Removable Eye Deck Plate/AssemblySpecifications:  Eye Width 5/8" (16 mm) Eye Height 5/8" (16 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 3" (76 mm) Fasteners (4), 1/4" FH (6 mm) C/C A 2" (51 mm) C/C B 2" (51 mm) SWL 2250 lbs. (1020 kg) Weight 9.5 oz. (269 g) Deck plate hole is 3/4"-10

Read more less

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope DiameterSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load.Features: 360° Rotation Small T-Cleat & Fairlead Applications:Sheet leads and halyards on dinghies and catamaransMaterials: Alloy cleating arms Grade 316 Stainless Steel fittings Specifications: Color: Black Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 9316800203413

Read more less

Size 1 30mm Plain Bearing Pulley Block Single Fixed EyeThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durability. Also available in ball bearing sheave options, the lightweight modern design is available in variations that allow for a multitude of uses on every size craft.The 30mm sheave Size 1 block range is designed with an internal steel frame for added strength and durability. Available in plain and ball-bearing sheave options, the lightweight modern design is available in variations that allow for a multitude of uses on every size craft.Suitable for up to 8mm (5/16") rope. Quick Guide (pdf)

Read more less

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g

Read more less

Furling Top SwivelThe top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.Features: Drum Diameter: 25mm Sail Area: 100 square foot Break Load: 1,108kg Safe Working Load: 554kg Weight: 55g

Read more less

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are manufactured from marine grade 'Spectro' anodized aluminum, for high wear resistance and long life. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.The true clutch mechanism allows the line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanisms opening and closing action is precise and easy to operate, even with cold, wet hands.  A unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace it with printed colored inserts to denote at a glance the function of the unit (i.e. main, genoa, spinnaker, etc).The D0 550 clutch features the advantage of a bolt-together construction which allows for ease of servicing and replacement of parts.Features: Modern high-performance materials  True clutch mechanism  Protects lines Maintenance friendly Ergonomically designed Technical Specifications: Dimension (L x W x H)  - 5 ¼” x 2 ½” x 2 ½” (13.3 x  6.3 x 6.3 cm) Hole centres = 3 1/8” (79mm) Maximum Rope Capacity - .47” (1.2 cm) Maximum Holding Power – 1,212 Lb (550 kg) Weight - 1.2 lb (544 g) *Sold as an Individual  Specifications: Color: Black Box Dimensions: 3"H x 3"W x 6"L WT: 1.2 lbs UPC: 5035088815012 Quick Guide (pdf)Brochure (pdf)

Read more less

Micro Cam-Matic Aluminum Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead.Specifications: Weight: 33g / 1.2oz Maximum working load: 91kg / 200lb

Read more less

Aluminum Deck Cleat - 4"Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g)

Read more less

Fast Entry Cam Cleat - LargeFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 500 lbs (227kg) Line 1/4" - 5/8" (6mm - 16mm), Requires (2) 1/4" Flat Head Fasteners. 2-1/16" (52mm) Centers.

Read more less

T-Track Endstop for 1-1/4" Track - Grey1 1/4" Grey Endstop   Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 740507007279

Read more less

Stainless Steel Welded Pad Eye - 3"L x 1"WSpecifications: Eye Width 7/8" (22 mm) Eye Height 7/8" (22 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 1" (25 mm) Fasteners (2), 1/4" RH (6 mm) C/C 2-3/16" (55 mm) SWL 2500 lbs. (1135 kg) Weight 3.25 oz. (92 g)  Specifications: Color: Stainless Box Dimensions: 2"H x 2"W x 4"L WT: 0.1 lbs UPC: 740507007767

Read more less

Mid-Rail Chock/Cleat Stainless SteelSchaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 6-1/2" (165 mm) ID 1-7/16" (180 mm) Line Size 1/2" (13 mm) Track 1" x 1/8" (25 mm x 3 mm) Pin. Size 1/4" (6 mm) SWL 2500 lbs. (1140 kg) Weight .9 lb. (.41 kg).  Specifications: Color: Stainless Box Dimensions: 2"H x 2"W x 8"L WT: 1 lbs UPC: 740507022654

Read more less

Exit Plate/Flat for up to 1/2" LineSpecifications: Halyard Size 1/2" (12 mm) Mast Stat Opening 2-1/4"x 13/16" (57 mm x 21 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g) 

Read more less

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'. Eliminates possibility of halyard wrap with furling systems when properly installed. For halyards up to 5/8" (16mm). Uses (4) #10 RH Fasteners. L = 2" (51mm), Width = 2-3/4" (70mm), SWL = 2000 lbs (907 kg), Weight 4 oz (114 grams)  

Read more less

Symmetric Carbine Hook Without Eye - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working load (lb) 790 WLL (lb) 260 Breaking load (lb) 1320 Weight (lb) 0.062 Dimensions (see 2nd image): A (inch) 25/64" B (inch) 5/16" D diameter (inch) 15/64"

Read more less

V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications:Control lines on dinghies and catamaransMaterial:PTFE impregnated, glass and carbon fiber composite cleats Specifications: Color: Black Box Dimensions: 1"H x 1"W x 3"L WT: 0.1 lbs UPC: 9316800212989

Read more less

Series 60AP Rope Sheave - Acetal Solid Bearing - 60mm(2-3/8") ODRonstan’s range of Acetal sheaves is moulded from a specially modified ultra-violet resistant grade of material to provide a long service life in the tough marine environment. Acetal is well suited to the application, with characteristics of high strength and resistance to impact and wear. It also exhibits excellent low friction properties for bearing applications. .Features: High strength and durability, utilizing the self-lubricating properties of Acetal U.V. resistant acetal sheaves Specifications: Color: White Box Dimensions: 1"H x 3"W x 3"L WT: 0.1 lbs UPC: 9316800098835

Read more less

Low Friction Ring - 21mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features: Compact & lightweight Low friction Large shoulder secure allowing for rope lashing Durable Simple & reliable design Low maintenance Specifications: Color: Black Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800525966

Read more less

13mm Low Beam Track - 2MThis track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.Specifications: Weight (g): 429 g Weight (oz): 15.1 oz Mounting Hole Spacing (mm): 50 mm Mounting Hole Spacing (in): 1-31/32 in Fasteners (mm): 4 FH mm Fasteners (in): #8 FH in Minimum Curved Track Radius (m): 1.52 m Minimum Curved Track Radius (ft): 5 ft Length (m): 2 m Length (ft in): 6' 7" ft in Line Shedding Endstop: 2706 Splice Link: 2711

Read more less

Micro Carbo-Cam Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat.Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.Specifications: Weight: 26g / 0.9oz Maximum working load: 68kg / 150lb

Read more less

Symmetric Carbin Hook Without Eye - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications: Materials 316L stainless steel grade Length (inch) 4-23/32" Working load (lb) 2990 WLL (lb) 1670 Breaking load (lb) 8370 Weight (lb) 0.441 Dimensions (see 2nd image): A (inch) 53/64" B (inch) 5/8" D diameter (inch) 15/32"

Read more less

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Quick Guide (pdf)

Read more less

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features: Clamps onto shroud wire without causing damage Simple and convenient to install Durable marine grade nylon construction Specifications: Color - Black Material - Nylon Length - 100mm (4") Weight - 26 grams In the Box: Shroud cleat Mounting hardware Specifications: Color: Black Box Dimensions: 1"H x 3"W x 4"L WT: 1 lbs UPC: 5035088521104

Read more less

Sister Clip - Stainless Steel - LargeEffective means of quickly attaching and detaching ropes58.0mm(2-1/4") Length Specifications: Color: Stainless Box Dimensions: 1"H x 1"W x 2"L WT: 0.3 lbs UPC: 9316800053315

Read more less

Cam Fairlead - BlackMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Read more less

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

Read more less

Aluminum Deck Cleat - 8"Length 8" (203 mm), Line Score 5/8" (16 mm), Fasteners (2), 5/16" FH (8 mm), C/C A 2" (51 mm), Weght 8.5 oz. (240 g)

Read more less

Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 300 lbs (135kg) Line 1/4" - 7/16" (6mm - 12mm), Requires (2) #10 Flat Head Fasteners. 1.5" (38mm) Centers. Matches Competitors Center to center measurements. Specifications: Color: Black Box Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbs UPC: 740507903793

Read more less

T-Track Endstop for 1" Track - Grey1" Grey Endstop Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs UPC: 740507007255

Read more less

Stanchion Base Single - Heavy-DutyRugged SS Base is canted 5 degrees inboard to match most deck cambers. Features a 5/16" (8mm) welded rod reinforcement which also serves as a bail for snatch blocks and other gear. Specifications: Length 5-1/8" (130 mm) Width 2-3/4" (70 mm) T 1" (25 mm) Fastners (4), 1/4" (6 mm) Weight 14 oz. (397 g) 

Read more less

Stainless Steel Cleat - 6"6" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/2" (12mm), Length 6" (152mm), Height 1.2" (30mm), Fastener size 1/4" FH, Fastener center/center 1.5" (38mm), Weight 9.0oz (.26kg)

Read more less

Aluminum Deck Cleat - 5"Length 5" (127 mm), Line Score 1/2" (13 mm), Fasteners (2), #12 FH (6 mm), C/C A 1-1/4" (32 mm), Weght 2 oz. (57 g)

Read more less

Investment Cast Pad Eye - 3" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately. Specifications:  Eye Width 1-1/8" (29 mm) Eye Height 7/8" (22 mm) Eye Stock 1/2" (13 mm) Length 3" (76 mm) Width 3" (76 mm) Fasteners (4), 3/8" FH (10 mm) C/C A 1-1/8" (29 mm) C/C B 1-11/16" (43 mm) SWL 8500 lbs. (3800 kg) Specifications: Color: Stainless Box Dimensions: 2"H x 4"W x 5"L WT: 0.75 lbs UPC: 740507007866

Read more less

Asymmetric Carbine Hook - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working load (lb) 880 WLL (lb) 350 Breaking load (lb) 1760 Weight (lb) 0.068 Dimensions (see 2nd image): A (inch) 7/16" B (inch) 9/32" D diameter (inch) 15/64"

Read more less

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail blocks etc.The high-load eye, combined with the Dyneema loop, gives you a fast, efficient, simple, and extremely strong solution for changing the direction of any line. The hard anodised aluminium eye is designed to have very good wear-resistant properties with low friction, which, combined with the high-strength Dyneema loop, gives you an exceptional low weight to very high performance and load ratio.Features: High load eye compared to a standard plain bearing block on average across the range Friction increases by only 15% Strength increased by 272% Weight reduced by 51% Data based on using a 4mm D12 SK75 Dyneema core

Read more less

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The unique, super-low friction ball race system runs on a large diameter center boss, which ensures an extremely low friction performance.  Technical Specifications: Overall Diameter - 1- 4/10" (35mm) Hub Width -  .47" (12mm) Bore - .31" (8mm) *Sold as an Individual 

Read more less

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features: Wide eye opening for stowage of shackles Clamps onto shroud wire without causing damage Simple and convenient to install Durable marine grade nylon construction Specifications: Color - Black Material - Nylon Length - 100mm (4") Weight - 26 grams In the Box: Shroud cleat w/eye Mounting hardware Specifications: Color: Black Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 5035088521111

Read more less

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications: Material - Nylon Dimensions (Cleat length) - 4.37" (111 mm) Weight - 3.17 oz (90 g) Maximum Stanchion (Tube) Size - 1" (25mm)  *Sold as an Individual  Specifications: Color: Black Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs UPC: 5035088521005 Brochure (pdf)

Read more less

29mm Carbo Double Swivel Symmetrical Fishing PulleyDesigned to improve the deployment and retraction responsiveness and the precise presentation of bait teasers aboard sport fishing boats. The unit features two back-to-back 29 mm sheaves, which make it symmetrical and balanced. This is the first fishing pulley with a swivel on both ends, where earlier models had a single swivel at the head. This eliminates the need to manually rig another swivel at the opposite end. Getting rigging done and lures in the water much faster. Symmetrical, balanced, and mated sheaves prevent the pulley from capsizing and improve load alignment. The pulley’s low-friction design allows easier adjustment and movement of the teaser rig. This includes shaking grass and moving the rig in or out as the boat turns. Harken ball bearing technology helps crews react when there’s a fish on and everything else needs to come out of the water NOW.Specifications: Sheave Ø (mm): 29 mm Length (mm): 140 mm Length (in): 5-1/2 in Weight (g): 57 g Weight (oz): 2 oz Maximum line Ø (mm): 8 mm Maximum working load (kg): 150 kg Breaking load (kg): 1000 kg

Read more less