Plug-In Locking Air-Ride Post - 14-1/4" to 21"Features: Pedestals Can Be Locked In Position To Prevent Rotating Or Unlocked To Rotate Freely Provides Safe, Stable Seating Fits Any 2-3/8″ Plug-In™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Locking Fuel Fill Insert(0525) Black Plastic with Zinc Alloy Lock Cylinder Dual purpose key opens fill cap & locking insert Fits most PERKO vented fills Quick Guide (pdf)

Read more less

Folding Seat HingeUse to build a folding seatLength:2"Width:3-3/16"Depth:1-1/4"Fastener:#10(4)Material: 304 Stainless Steel Specifications: Material: Stainless Steel Color: Stainless Box Dimensions: 1"H x 1"W x 1"L WT: 1 lbs

Read more less

Stainless Steel Round Louvered Vent - 5" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Spare Cap f/1313 Gas FillNon-Locking Spare Cap f/1313 Gas Fill

Read more less

Mortise Latch Set with Turn Button Features:Chrome Plated Zinc Alloy Turn Button Lock Bevel can be Reversed During Installation Specifications: Door Thickness: 1" - 1-3/8" Escutcheon Dimensions Screw Size: 6

Read more less

PVC Coated Grab Handle - White - 9-3/4"Soft Grip Handle with concealed fasteners. Constructed of injection molded nylon with PVC coating. Installs with two #10 FH fasteners (included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Roller Catch - Surface Mount Constructed of sturdy injection molded nylon. These catches feature stainless steel springs and provide secure closure for cabinet doors. Installs with four #8 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Spare Waste Cap with O-RingFeatures:Black Polymer Cap

Read more less

Open Base Cleat(1188)Chrome Plated Zinc AlloyLength Overall: 8"Dimensions Base: 4" x 2-1/8"Max Rope Size: 5/8" Specifications: Finish: Chrome Construction: Zinc Size: 8" Box Dimensions: 2"H x 4"W x 8"L WT: 0.55 lbs UPC: 085226013379

Read more less

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills(1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32" Specifications: Construction: Plastic Box Dimensions: 2"H x 3"W x 6"L WT: 0.15 lbs UPC: 085226029707 Quick Guide (pdf)

Read more less

Push To Close Latch Point - ChromeWhen your door or drawer design calls for elegant simplicity, make it a point to choose the new push-to-close Southco Point Latch. Its flush-mount design features a retractable metal pull knob that pops up at the push of a button to provide a consistent grip and a solid feeling of quality in the latch's operation. And the latch can be slammed closed and remain secured regardless of the knob's position – exposed or retracted.Features: Point Push To Close Latch Oval Perpendicular Housing Chrome Housing Chrome Knob

Read more less

Replacement Key for Compression HandlesFeatures:Key Fits: 8726B, 8228B, 8228W, S-9415B, S-9415W

Read more less

Transom Door Latch Handle - Catch Plate IncludedIdeal for one handed operation of Transom Doors. 316 SS Hand Buffed and Electro-Polished. Includes Handle and Catch Plate.Specifications:  Weight 2.8 lbs (1.27kg) Length 9-5/8" (244mm) Height 2-3/4" (70mm)   Base Plate 4-1/2" (114mm) x 3-1/2" (89mm) Uses (4) 1/4" Flat Head Fasteners

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-Handle Latch - Chrome Plated Zamac/Black Nylon - Locking - Freshwater OnlyFeatures: Nylon Body and CP Zamac handle Locking T-Handle latch Short Offset Cam Bar Nylon body is Black Neoprene O-ring & Key fastener included Surface Depth - 1/8"-3/4" Diameter - 3" Cut-Out - 2-1/2" Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Concealed Soft Draw Latch with Keeper - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Read more less

Solid Teak Grab Handle 1-3/8"W x 9-3/4"L x 2-1/4"H Pre-drilled 3/16" mounting holes Fasteners not included Mounts almost anywhere

Read more less

Louvered Door & FrameCutout: 11" x 11"Right Hand Opening

Read more less

Hollow Back 304 Stainless Steel Rub Rail Insert 3/4" x 6'Sold in 6' increments. Features: Sold in 6' Stainless Steel Type-304/316L Drilled and countersunk for #8 screws on 6-inch centers 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Four Drink/Binocular Rack - TeakFeatures: 14-1/4"L x 4"W x 3-1/2"H Holds 4 cans or bottles, or 2 drinks and one pair of binoculars

Read more less

Pop-Out Knob Latch w/Fixed Grip Threaded Body - Black PlasticFeatures: Material: Plastic Material Grade: ABS Finish: Natural Color/Appearance: Black Access Restriction: No Restriction Grip Type: Fixed Installation: Threaded body and nut Panel Thickness: 1.200-19.000mm (0.05-0.75") Profile: Low Profile

Read more less

Toilet Tissue Rack Spring-loaded bar 1-7/8"H x 5-1/2"W x 3-3/4"D

Read more less

Pop-Out Knob Latch Plastic Chrome Plated Fixed Grip Threaded Body .05-.75Features: Material: Plastic Material: Grade ABS Finish: Chrome Plated Access Restriction: No Restrictriction Grip Type: Fixed Installation: Threaded Body and Nut Panel Thickness: 1.200-19,000 mm (0.05-0.75 Profile: Low Profile Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Solid Teak Handrails Two-Loop Handrail 23"L x 2-3/8"H x 1"D

Read more less

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fender HookThis fender hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" lineFeatures: The spring-loaded hook keeps the line captive against the surface Constructed of corrosion-resistant investment-cast 316 stainless steel with rubber gasket Installs with two #8 FH fasteners (not included) Specifications: Length (inch): 2-1/16"     Width (inch): 1-1/4 Depth (inch): 5/8" Line Size (inch): 1/4"-3/8"                             Fastener: #8 FH Weight: 0.24 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Grabber Catch Latch - Side Mount - Black - Pull-Up Force 13N (3lbf)Features: Spring-loaded over-center latching One assembly includes catch and keeper Material and Finish: PC/ABS, black Performance Details: Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF) Flammability rating: UL94-HB Installation Notes: Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching. Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)

Read more less

Stand-Up Paper Towel Holder 13-1/2"H x 5-7/8" diameter Fits standard or jumbo roll Oiled finish

Read more less

Flush Pull Latch - Pull To Open - Non-Locking Black PlasticSpecifications: Material: Plastic Material Grade: PC / PBT Blend Finish: Natural Color/Appearance: Black Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 12.000-17.000 mm (0.47-0.67 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Latch-tite™ Lifting Handle - 3" Round - Stainless SteelStainless Steel Type 316Deluxe PolishedLatch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Round design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.The Latch-tite™series is for applications that require a heavy-duty, high performance construction and high quality appearance.Features: Cast stainless steel Deluxe polish finish Unique patented stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration Over center anti-rattle handles provide quiet operation Concealed fasteners Mold plugs available upon request for boat builders Specifications: Dimensions: 3" Diameter Edge Thickness: 3/32" Adjust Depth: 2-7/8" Hole Size: 2-9/16" Overall Depth: 3-13/16" Screw: #8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills(1324) Black Plastic with Gasket Built in Lock Cylinder Size #1 Fits PERKO Fills 0520, 0527, 0528, 0557, 0599 and 1270 Cap Outside Thread Diameter: 1-7/8" Specifications: Construction: Plastic Box Dimensions: 2"H x 3"W x 6"L WT: 0.2 lbs UPC: 085226364440 Quick Guide (pdf)

Read more less

Low Profile Cowl Vent/Snap-On Deck Plate - Dip Molded PVCLow Profile Cowl Vents are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV-resistant dip-molded PVC. Available with a white or traditional red interior. Avoid contact with acetone or strong solvents.Specifications: Diameter: 3" Installed Height: 4-1/4" Required Hole Size: 3-3/4: Int. Color: Red Specifications: Type: Parts Box Dimensions: 6"H x 7"W x 8"L WT: 1.1 lbs UPC: 035514727204

Read more less

Stainless Steel/Nylon Hatch SpringThis strong Hatch Spring has an internal cable that prevents the spring from being overextended during normal use. Ideal for larger hatches and dock boxes. Constructed of corrosion resistant formed 304 stainless steel with heavy duty molded nylon mounting pads on both ends. Installs with eight #10 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Replacement Eye Bolt for Suspending Transducer for Ultra & Pro Pack IIReplacement Eye-Bolt AssemblyWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Barrel Bolt - Chrome Finish - 2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rail Mount Cleat 4-5/16"This Rail Mount Cleat includes a Heavy-Duty Cleat (043340). Ideal for easy attachment of fender, flag halyards, canvas tie downs, and related accessories. Constructed of UV-resistant injection-molded nylon with stainless hardware.Specifications: 4 5/16" long 7/8" to 1" Rail

Read more less

Removable Round Rail Mount Clamps - Injection Molded Nylon/EDPM/Stainless SteelRemovable Round Rail Mount Clamps are great for retrofitting your existing rails to mount a wide variety of items, including fillet tables, solar panels, GPS, cell phone holders, cup holders, binocular racks, etc. Clamps fit 3/4", 1", and 1-1/4" tubing. Includes shims, thumb screws, and all mounting hardware. Constructed of UV-stabilized injection-molded nylon with stainless hardware.

Read more less

Remote Wireless Horn Button - Steering Wheel Hub MountThis horn button works with a simple push. Essentially, the remote wireless momentary push-button horn switch is activated by pushing the button transmitter to send a signal to the receiver, which activates the existing horn. Features: The receiver connects to the existing horn switch wiring for easy installation The receiver works up to 50 ft. away from the horn button The transmitter button uses a CR2032 battery (included) and is installed to wheel center cap either by double-back tape or two #8 fasteners (included) Specifications: Horn Button Diameter: 2-15/16 in. Horn Button Depth: 7/8 in. Transmitter Width: 2-1/4 in. Transmitter Length: 1-1/4 in. Maximum: 20A. 12VDC. Volts: 12 Amps: 20 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Skene Chocks - 4-1/2"These Skene Chocks provide a smooth lead for your mooring or dock lines minimizing chafing. The tips of these chocks are designed to overlap, preventing the motion of the boat from causing the line to accidentally work free of the chock. Left and right skene chocks included. Accommodates lines up to 3/4”. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Round Louvered Vent - 4" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 4” 0.88 in2. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gas Filled Lift Spring - 20" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length: 20" Lift Capacity: 30 lbs Box Dimensions: 1"H x 1"W x 21"L WT: 0.4 lbs UPC: 035514321938

Read more less

Flush Hatch Pull Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gas Filled Lift Spring - 17" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length: 17" Lift Capacity: 40 lbs Box Dimensions: 1"H x 1"W x 18"L WT: 0.1 lbs UPC: 035514321891

Read more less

Screw-Out Deck Plate - White - 6" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less