Standard Wiper Motor - 2.5" Shaft - 12V Features: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 80° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years

Read more less

Wiper Motor, 1000 Series, 12V, 2.5" Shaft, 65° SweepThe 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree.Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps

Read more less

Deluxe Stainless Steel Wiper Blade - 24"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Waterproof Standard Wiper Motor Kit 2-1/2" - 80°Waterproof Standard Wiper Motor Kit includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of corrosion resistant powder coated aluminum housing with stainless steel base plate, shaft, and knurled drive nut. IP66 rating. CE compliant. 3-year warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Standard Wiper Motor Kit 2-1/2" - 110°Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of powder coated aluminum and 304 stainless steel. CE compliant. 3-year warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Waterproof Wiper Motor 12V - 2.5" Shaft - 80° SweepThe 1.5 Waterproof Wiper Motor is made with a fully sealed powder coated aluminum waterproof base and housing to power a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination.Features: Available in three shaft lengths: 1.5", 2.5" and 3.5" (includes .5" length of knurled arm fitting) Factory pre-set sweep angles of 80 degrees or 110 degrees, with easy adjustment to 45 degrees or 60 degree Chrome plated solid brass knurled drive nut with brass and stainless steel driveshaft Two-speed motor Sealed 6" wire leads, 16 AWG Adjustable right or left self-parking 0.625" diameter shaft (16 mm) Available in 12V and 24V models Coast to park RF shielded circuitry Retail version includes 5 amp fuse and holder (operating switch not included) Measures approximately 7.75" L x 4" W x 2.75" D Stall torque: 109 in-lbs (125 kgf/cm; 12.3 Nm) Stall current: 11.5-13.0 amps No load current: 0.5-1.2 amps Replaces AFI 2000 motor

Read more less

Single Speed Intermittent Wiper Motor ControllerSynchronized control of single or dual speed 12V/24V wiper systems, features intuitive automotive style functionality. Easy to use with included Contura switch, and easy to install with ¼" spade connectors. IP67 potted aluminium construction for harsh environment durability.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deluxe Stainless Steel Wiper Blade - 14" - Black Powder CoatedThis deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms. Specifications:Length: 14 in.

Read more less

Wiper Motor MRV 12V 2.5" Shaft - 80°The MRV Wiper Motor easily powers 22" x 22" deluxe arm/blade combinations, or a 20" x 20" premier arm/blade combination at sweep sets of 80 degree or less.Features: Factory pre-set sweep of 80 or 110 degrees adjustable to 45, 60, 80 or 110 degrees 0.625" diameter shaft (16 mm) Available in 3 shaft lengths: 1.5", 2.5" and 3.5" (includes 0.5" length of knurled arm fitting) Corrosion-resistant casing Heavy-duty motor with right angle drive Two-speed motor, can be operated as one speed Solid brass knurled drive nut with brass and stainless steel drive shaft Adjustable right or left self parking, coast to park Retail version includes 5 amp fuse and holder Stainless steel fasteners and mounting bracket Use with three-position switch (not included) Compact size - 7.625" L x 4" W x 2" D Stall torque: 109 in-lbs (125 kgf/cm: 12.3 Nm) Stall current: 11.5 to 13.0 amps No load current: 0.5 to 1.2 amps

Read more less

Wiper Arm Deluxe Stainless Steel Single - 6.75"-10.5"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Wiper Arm Deluxe Stainless Steel Single - 14"-20"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Premier Wiper Arm - Stainless Steel - Single - 15-20"Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.Features: Compatible with 2.5 and 1.5 MRV wiper motors Wet single-wiper style Physical Specifications: Each in Package Height (in): 0.6" Each in Package Width (in): 3.1" Each in Package Length/Depth (in): 19.5" Each in Package Weight (oz): 12.8"

Read more less

Deluxe Stainless Steel Wiper Blade - 26"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Standard Wiper Motor Kit 2-1/2" - 80°Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of powder coated aluminum and 304 stainless steel. CE compliant. 3-year warranty. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Wiper Motor 1000 Series - 12V - 2.5" Shaft - 80°The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree.Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Read more less

Deluxe Stainless Steel Wiper Blade - 12"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Wiper Arm Deluxe Stainless Steel - Black - Single - 14"-20"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Wiper Arm Deluxe Stainless Steel - Black - Single - 10"-14"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Wiper Arm, Deluxe Black Stainless Steel Pantographic - 12"-17" AdjustableDeluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel The arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping For use with 2.5, 1.5, and MRV Motors Dry pantographic wiper style

Read more less

Deluxe Stainless Steel Wiper Blade - 22"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Wiper Arm Deluxe Black Stainless Steel Pantographic - 17"-22" AdjustableDeluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping For use with 2.5, 1.5 and MRV Motors Dry pantographic wiper style

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 14"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Deluxe Adjustable Pantograph Arm 19" - 24" Ultra HDDeluxe Adjustable Parallel Arm 19" - 24"Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Read more less

Deluxe Stainless Steel Wiper Blade - 20"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 22"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Wiper Motor 1000 Series - 12V - 2.5" Shaft - 110°The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree.Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Read more less

Deluxe Stainless Steel Wiper Blade - 16"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Wiper Arm Deluxe Stainless Steel - Black - Single - 18"-24"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Wiper Motor Cover MRV - WhiteThis easily installed cover for the MRV Wiper Motor is onstructed of white ABS plastic.

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 20"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Wiper Arm Deluxe Stainless Steel Single - 10"-14"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Wiper Motor 1000 Series - 12V - 1.5" Shaft - 80° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree.Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Read more less

Deluxe Stainless Steel Wiper Blade - 14"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 24"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Deluxe Adjustable Arm with Adjustable Tip 12" - 18" Ultra HD Deluxe Adjustable Arm with Adjustable Tip 12" - 18"Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Read more less

Deluxe Stainless Steel Wiper Blade - 18"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Dual Speed Intermittent Wiper Motor ControllerSynchronized control of single or dual speed 12V/24V wiper systems, features intuitive automotive style functionality. Easy to use with included Contura switch, and easy to install with ¼" spade connectors. IP67 potted aluminium construction for harsh environment durability.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deluxe Stainless Steel Wiper Blade - 12" - Black Powder CoatedThis deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms. Specifications:Length: 12 in.

Read more less

Deluxe Stainless Steel Wiper Blade - 16" - Black Powder CoatedThis deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms. Specifications:Length: 16 in.

Read more less

Deluxe Stainless Steel Wiper Blade - 11" - Black Powder CoatedThis deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms. Specifications:Length: 11 in.

Read more less

Deluxe Stainless Steel Wiper Blade - 18" - Black Powder CoatedThis deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms. Specifications:Length: 18 in.

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 16"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 18"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Standard Wiper Motor Kit with 1.5" Shaft, 14" Arm & 11" Blade - 12V Features: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 80° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years Quick Guide (pdf)

Read more less

Waterproof Standard Wiper Motor - 90/100 Degree - 12VFeatures: Motor with an adjustable sweep angle of 90 or 110 degrees Adjustable left or right self-parking Standard adjustment 90 degrees - left self-parking Motor shaft & mounting plate in stainless steel Black powder lacquered aluminum cover Arm/Blade combination up to 14"/14"

Read more less

Standard Wiper Motor Kit with 1.5" Shaft, 14" Arm & 14" Blade - 12VMotor Kit with 1.5" Shaft, 14" Arm & 14" Blade - 12 VoltFeatures: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 80° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years Quick Guide (pdf)

Read more less

Deluxe Adjustable Arm 19"-24" Ultra HD Deluxe Adjustable Arm 19"-24"Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Read more less

Deluxe Adjustable Arm with Adjustable Tip 19" - 24" Ultra HDDeluxe Adjustable Arm with Adjustable Tip 19" - 24"Features: 5/8" Shaft Powder Coated 304 Stainless Steel HD Stainless Steel Spring Will replace all Competitive Arms on HD motors

Read more less