FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-PackThe Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.Features: 10 interlocking blocks stack to the desired height for customizable leveling Carrying handle easily twists to secure blocks together for storage Strong and durable construction Safe and easy to use Compatible with Camco Leveling Blocks

Read more less

Replacement MudflapReplacement mudflap for your existing ROCK TAMERS Mudflap System.Compatibility: 00108 Mudflap System - 2" Hub 00110 Mudflap System - 2.5" Hub 00112 Mudflap System - 3" Hub Features: Mudflap can be used for both left and right sides Mudflap is 3/8" thick, fiber reinforced rubber Rock Tamers trim plate is sold separately, part RT028 Mudflap measures 24" x 24" *Sold as an IndividualWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

3" Hub Mudflap System - Matte Black/StainlessROCK TAMERS™ is the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris.Perfect solution for consumers who want the utility aspect of mudflaps and to maintain their vehicle’s stylish and attractive appearance.*This patented system is easy to attach or remove from any standard 3" ball mountFeatures: Mudflap height is adjustable to maintain consistent ground clearance when towing various loads Overall width is adjustable and easily fine-tuned to fit any small, full size, or dually truck Width expands from 68 1/4" to 97 3/4" Mudflap measures 24" x 24" In the Box: 3" Center Hub/Matte Black Finish M10 Ball Mount Clamp Bolt x 2 M10 Jam Nut x 2 M10 Split Washer and M10 Flat Washer x 2 Hub Arm R (Right)  and Hub Arm L (Left) x 1 M6 Arm Clamp Bolt x 6 M6 Nylon Insert Hex Nut x 6 M18 Arm Pivot Bolt/Split Washer/Flat Washer x 2 5MM Allen Wrench x 1 Flap Support Rod x 2 Rod End Cap and Flap End Cap x 2 M5 Flap Retainer and End Cap Bolt x 2 M5 Nylon Insert Hex Nut x 4 Flap Clamp / Matte Black Finish x 2 Mudflap (SS Trim Plate) x 2 M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10 Bolt Hole Punch x 1 Rock Tamers Trim Plate x 2 M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16 Locking STAR PIN™ Wrench x 1 Instruction Manual  x 1 *Sold as a KitWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

2" Hub Mudflap System - Matte Black/StainlessROCK TAMERS™ is the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris.Perfect solution for consumers who want the utility aspect of mudflaps and to maintain their vehicle’s stylish and attractive appearance.*This patented system is easy to attach or remove from any standard 2" ball mountFeatures: Mudflap height is adjustable to maintain consistent ground clearance when towing various loads Overall width is adjustable and easily fine-tuned to fit any small, full size, or dually truck Width expands from 67 1/4" to 96 3/4" Mudflap measures 24" x 24" In the Box: 2" Center Hub/Matte Black Finish M10 Ball Mount Clamp Bolt x 2 M10 Jam Nut x 2 M10 Split Washer and M10 Flat Washer x 2 Hub Arm R (Right)  and Hub Arm L (Left) x 1 M6 Arm Clamp Bolt x 6 M6 Nylon Insert Hex Nut x 6 M18 Arm Pivot Bolt/Split Washer/Flat Washer x 2 5MM Allen Wrench x 1 Flap Support Rod x 2 Rod End Cap and Flap End Cap x 2 M5 Flap Retainer and End Cap Bolt x 2 M5 Nylon Insert Hex Nut x 4 Flap Clamp / Matte Black Finish x 2 Mudflap (SS Trim Plate) x 2 M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10 Bolt Hole Punch x 1 Rock Tamers Trim Plate x 2 M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16 Locking STAR PIN™ Wrench x 1 Instruction Manual  x 1 *Sold as a KitWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Draw Bar Storage Bag Black Don't bang your shins! Store the draw bar and keep your vehicle clean Remove the draw bar and hitch ball from your vehicle to prevent banging your shin. Store it conveniently in your tow vehicle. Bag is padded with a strong zipper closure. Will easily hold a 2" receiver drawbar and hitch ball with a 2" rise or a 4" drop. Made of strong 600 Denier polyester with PVC backing. Includes a carry handle and a pocket to hold hitch pin. Size: 15"L x 6"H x 4"D WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Curved Leveler & Wheel Chock *2-PackThe Camco Curved Leveler is a simple way to level your vehicle by giving a tire up to 4-inches of extra lift. The honeycomb design makes the leveler lightweight but durable. The drive-on curved design allows you to only drive on to as much height as needed, then chock the leveler at the exact right height. The included chock has non-slip rubber grippers on the bottom. Patented.Features: Easy drive-on leveler adds up to 4-inches in height Honeycomb design makes leveler lightweight, but durable Included chock has non-slip rubber grippers on the bottom The compact length makes the leveler compatible with tandem wheel spacing without modification Designed for use with trailers up to 30,000 lb. Patented

Read more less

Galvanized Coupler Lock Pin - 1/4" Square coupler pins add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Electrogalvanized steel construction for corrosion resistance. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Elite Lock - Single - Receiver Lock - 5/8" - BlackThe Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Trailer Hitch Receiver Extension, 2" to 2" Extension, 8" Length - 3,500 lbs.Features: Ideal for slide-out campers with extended overhangs 2" square tube opening for use with ball mounts and hitch-mounted accessories WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2.5" Hub Mudflap System - Matte Black/StainlessROCK TAMERS™ is the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris.Perfect solution for consumers who want the utility aspect of mudflaps and to maintain their vehicle’s stylish and attractive appearance.*This patented system is easy to attach or remove from any standard 2.5" ball mountFeatures: Mudflap height is adjustable to maintain consistent ground clearance when towing various loads Overall width is adjustable and easily fine-tuned to fit any small, full size, or dually truck Width expands from 67 3/4" to 97 1/4" Mudflap measures 24" x 24" In the Box: 2.5" Center Hub/Matte Black Finish M10 Ball Mount Clamp Bolt x 2 M10 Jam Nut x 2 M10 Split Washer and M10 Flat Washer x 2 Hub Arm R (Right)  and Hub Arm L (Left) x 1 M6 Arm Clamp Bolt x 6 M6 Nylon Insert Hex Nut x 6 M18 Arm Pivot Bolt/Split Washer/Flat Washer x 2 5MM Allen Wrench x 1 Flap Support Rod x 2 Rod End Cap and Flap End Cap x 2 M5 Flap Retainer and End Cap Bolt x 2 M5 Nylon Insert Hex Nut x 4 Flap Clamp / Matte Black Finish x 2 Mudflap (SS Trim Plate) x 2 M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10 Bolt Hole Punch x 1 Rock Tamers Trim Plate x 2 M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16 Locking STAR PIN™ Wrench x 1 Instruction Manual  x 1 *Sold as a KitWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

RockerBall Starter Kit - 5" DropThe CURT RockerBall™ cushion hitch provides improved comfort and enhanced control while towing, featuring our unique ShockDrop™ technology. An integrated cushion isolator allows the hitch ball to turn the standard ball mount into a cushion hitch with anti-rattle capabilities.The RockerBall™ ball mount kit is a shock-absorbing hitch accessory that dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chugging, and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy and uncomfortable and taking a toll on your towing system.The RockerBall™ completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount of stress placed on your vehicle, receiver hitch, brakes, and suspension system.The RockerBall™ is also extremely low-maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.This RockerBall™ hitch kit comes with a standard ball mount with a 5" drop and standard 2" shank to fit most class 3, class 4, and class 5 receiver hitches. It also includes an anti-rattle shim kit for maximum vibration resistance.The CURT RockerBall™ hitch ball is constructed from forged steel for exceptional strength. The base and ball mount are covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance.Features: Dynamic trailer ball featuring ShockDrop technology Dampen jerking and jarring from bumps and potholes for smoother towing Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on the tow vehicle's suspension and brakes for extended longevity Fits trailer hitches with a 2" x 2" receiver tube opening Virtually maintenance-free with no airbag or bearings to service Grease zerk fittings provide easy lubrication 5" drop for leveling towing with large or lifted trucks Forged steel ball for dependable towing power Durable black powder coat finish (chrome plating on the ball) Standard trailer ball diameter fits 2" couplers Rated for 7,500 lbs. GTW and 750 lbs. TW Tested for safety to meet SAE J684 specifications Specifications: Includes: 2" RockerBall #40047, ball mount #45050 and anti-rattle #22321 Ball Capacity: 7,500 lbs Ball Diameter: 2 in. Drop: 5in. Finish: Black powder coat Hub Warehouse: D01 Material: Forged steel Receiver Tube Size: 2 in. Shank Diameter: 2 in. Shank Length: 2 in. Tongue Weight: 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

Eaz-Lift 10" Wheel Stop with Wrench & Lock - MetalPrevent tandem-tire shift using just one piece of equipment- Eaz-Lift's Premium Metal Wheel Stop. Zinc-plated for corrosion resistance has raised ribs on the contact surface for increased traction, which helps prevent tire shift/slippage between tandem tires spaced from 3-10 inches apart. It also includes a comfort-grip ratchet wrench for easy installation and a lock to keep it secure.Features: Fits tire spacing from 3" - 10" Ratchet wrench included for easy installation Raised ribs for increased traction/less slippage Lock included for added security When compressed measures 14" Height x 4" Depth x 3" Width

Read more less

FasTen Leveling Blocks with T-Handle - 2x2 - Brown *10-PackThe Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.Features: 10 interlocking blocks stack to the desired height for customizable leveling Carrying handle easily twists to secure blocks together for storage Strong and durable construction Safe and easy to use Compatible with Camco Leveling Blocks

Read more less

Safety Chain Set (Pair) - Class IVProduct DescriptionZinc-plated, proof-coil chain features strong, heat-treated S-hooks to keep your trailer from separating from the tow vehicle if the coupler becomes unhitched. Remember to attach the open end of the hook up through the hole, not down, to prevent it from bouncing out. 24"L. Sold in pairs. 7600lb Capacity, 8/0 chain.

Read more less

Trailer Coupler Lift Handle Product DescriptionUse this trailer lift handle to make moving your trailer easier.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Wireless RV EZ LevelThe Camco Wireless RV EZ Level is the fastest, most convenient way to level your RV. It allows you to monitor your RV’s level in both axes simultaneously and has Bluetooth capabilities to display your RV levels on your smartphone or tablet. The EZ Level includes a free, easy-to-use mobile app, but can also be used without connecting to a device. Product features illuminated indicator lights—green means level; red indicates a low side. The EZ Level automatically shut off when it's not in use, extending the life of the (3) AA batteries (not included). Also features an on/off switch. The product is simple to operate and stow. Measures 8 5/16-inches (diameter) x 2 5/32-inches (tall).Features: Provides Fast and Easy RV Leveling: Allows you to monitor your RV’s level in both axes simultaneously Smartphone Compatible: Bluetooth capable to display your RV levels on your smartphone or tablet; Includes a free, easy-to-use mobile app; The EZ Level can be used without connecting to a device. Requires iOS 9.3 or higher or Android 7.0 or higher Illuminated Indicator Lights: Green means level; red indicates a low side Features: Automatic Shut Off Function plus on/off switch: Turns the level off when, not in use, extending the battery life Battery-Operated: Requires (3) AA batteries (not included) Simple to Operate and Stow: Unique design provides easy operation and stowing; Measurements: 8 5/16-inches (diameter) x 2 5/32-inches (tall)

Read more less

2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lb. Capacity - ChromeOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 1-3/4" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give peace of mind while towing to that next destination, CURT also carefully tests the trailer balls and ensures that each one meets U.S. VESC specifications.Features: It fits 2" couplers and accepts up to 3,500 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 3,500 lbs Ball Diameter: 2 in. Color: Silver Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 1-3/4 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

Switch Ball Trailer Ball Set - 1-7/8" & 2" Balls - 1-7/8" x 2-1/4" ShankCURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, switch balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the switch ball trailer ball allows different heads or ball sizes to be placed on the shank to accommodate different coupler sizes. This means there is no need to switch between ball mounts or even own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the switchball head, lift it off, and twist on another. The J-groove ensures a solid hold on your trailer while still allowing for easy removal of the trailer ball without tools or pins.This CURT Switch Ball trailer ball set comes with two ball attachments. Ball 1 features a ball diameter of 1-7/8" and a ball capacity of 3,500 lbs. Ball 2 has a 2" ball diameter and a ball capacity of 6,000 lbs. The shank measures 2-1/4" long and 1" in diameter. CURT constructs these interchangeable hitch balls from premium-grade steel for strength and gives them a bright nickel-chrome finish for a long life. To ensure your safety and provide you with a tow ball you can depend on, CURT switch balls are independently tested in accordance with SAE J684.Features: Fits 1-7/8" or 2" couplers and accepts up to 6,000 lbs. GTW (depending on ball) Exclusive 'J' groove design ensures a secure system No tools, coins, or pins are required for trailer ball installation Shank bears the weight, freeing the coupler from friction and binding Constructed from high-strength steel Protected by a premium-grade nickel chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Independently tested in accordance with SAE J684 for safety and proven safe Specifications: Ball 1 Diameter and Capacity: 1-7/8 in. - 3,500 lb. Ball 2 Diameter and Capacity: 2 in. - 6,000 lb. Finish: Chrome Hub Warehouse: D25 Neck Diameter: 1 in. Rise: 0 in. Shank Diameter: 1 in. Shank Length: 2-1/4 in. U.S. Patent (#): 5,169,168 Canadian Patent (#): 1,325,445 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

15' Dark Green Cargo Straps with "S" Hooks - 300 lbs - 2 PackWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.CURT cambuckle tie down cargo straps are a lightweight load-securing option and are especially useful when securing lighter loads and fragile cargo. They offer a direct influence over tension when tightening the strap, making it very difficult to over-tighten the strap and crush cargo. These cam straps are made of a tough, woven nylon material designed to be highly resistant to stretching and abrasion. They have a break strength of 900 lbs. and a work load limit of 300 lbs. They come equipped with rubber-coated S-hooks for a secure hold and strong resistance to corrosion and wear. These dark green cargo straps measure a total length of 15' and have a strap width of 1". Two cambuckle straps are included in this package.Packing up a vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to give yourself adequate storage room, even in the smallest cars. For that weekend getaway or trip cross-country, you can bring it all with CURT.Features: Two 15' long straps perfect for securing cargo in trailers, truck beds and more Offers a superior tiedown method compared to bungee cords and rope Provides a work load limit of 300 lbs. with a break strength of 900 lbs. Cambuckle mechanism allows for quick, direct tension on lighter loads Straps constructed from high-strength, woven nylon S-hooks coated in rubber for rust and wear resistance Cambuckles protected by a durable yellow zinc-plated finish Specifications: Break Strength: 900 lb. Capacity: 300 lb. Color: Dark Green Hook Finish: Rubber-coated Hook Style: S-hook Hub Warehouse: D25 Part Type: Cargo strap Quantity Per Package: 2 Strap Length: 15 ft. Strap Width: 1 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

1" Wheel Bearing KitIt may not be on the forefront of most drivers minds, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 1" diameter. Features: Features a 1" inside diameter Automatically maintains the correct internal pressure to avoid seal damage Specifications: Finish: Brushed Stainless Hub Warehouse: D25 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

2" Trailer Ball - 3/4" x 2-1/8" Shank - 3,500 lb. - Stainless SteelOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give you peace of mind while towing to that next destination, CURT also carefully tests out the trailer balls and ensures that each one meets U.S. VESC specifications.Features: Fits 2" couplers and accepts up to 3,500 lbs. GTW Stainless steel construction for excellent rust resistance Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 3,500 lbs Ball Diameter: 2 in. Color: Stainless Steel  Finish: Polished stainless Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

1-7/8" Trailer Ball - 3/4" x 2-1/8" Shank - 2,000 lb. Capacity - Stainless SteelOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.Features: Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Stainless steel construction for excellent rust resistance Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs Ball Diameter: 1-7/8 in. Color: Stainless Steel  Finish: Polished stainless Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

Switch Ball Trailer Ball Set - 1-7/8" & 2" Balls - 3/4" x 1-5/8" ShankCURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, switch balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the switch ball trailer ball allows different heads or ball sizes to be placed on the shank to accommodate different coupler sizes. This means there is no need to switch between ball mounts or even own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the switchball head, lift it off, and twist on another. The J-groove ensures a solid hold on your trailer while still allowing for easy removal of the trailer ball without tools or pins.This CURT Switch Ball trailer ball set comes with two ball attachments. Ball 1 features a ball diameter of 1-7/8" and a ball capacity of 3,500 lbs. Ball 2 has a 2" ball diameter and a ball capacity of 6,000 lbs. The shank measures 1-5/8" long and 3/4" in diameter. CURT constructs these interchangeable hitch balls from premium-grade steel for strength and gives them a bright nickel-chrome finish for a long life. To ensure your safety and provide you with a tow ball you can depend on, CURT switch balls are independently tested in accordance with SAE J684.Features: Fits 1-7/8" or 2" couplers and accepts up to 6,000 lbs. GTW (depending on the ball) Exclusive 'J' groove design ensures a secure system No tools, coins, or pins are required for trailer ball installation Shank bears the weight, freeing the coupler from friction and binding Constructed from high-strength steel Protected by a premium-grade nickel chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Independently tested in accordance with SAE J684 for safety and proven safe Specifications: Ball 1 Diameter and Capacity: 1-7/8 in. - 3,500 lb. Ball 2 Diameter and Capacity: 2 in. - 6,000 lb. Finish: Chrome Hub Warehouse: D25 Neck Diameter: 1 in. Rise: 0 in. Shank Diameter: 3/4 in. Shank Length: 1-5/8 in. U.S. Patent (#): 5,169,168 Canadian Patent (#): 1,325,445 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

5/8" Hitch Lock - 2" Receiver - Barbell - BlackMake the tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to be inserted into the fastener hole in the side of a receiver tube to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping a ball mount firmly attached, a CURT hitch lock goes one step further.CURT hitch locks allow users to lock the ball mount into the trailer hitch, deterring theft and preventing anyone from detaching a trailer from the ball mount and towing away from the property without permission. This CURT hitch lock features a barbell design and comes with a 5/8" pin diameter to fit a 2" receiver tube size (usable pin length is 2.850"; will not work with double-walled receiver tubes). CURT barbell hitch locks are comprised of a pin with two end caps and a round locking mechanism. This hitch lock is key-operated and activated with a simple 1/4-turn. Also, the hitch lock comes with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate in towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of the towing setup. For a boat, ATV, or camper, keep the toys more secure with CURT hitch locks.Features: 5/8" diameter pin fits 2" x 2" receiver tubes The usable pin length is 2.850" (not compatible with double-walled receiver tubes) Protected by a durable black finish Easy-to-operate, 1/4-turn lock activation A watertight dust cap prevents internal corrosion Includes two keys for added convenience Specifications: Finish: Semi-gloss black powder coat Hub Warehouse: D25 Material: Carbon steel Part Type: Hitch lock Pin Diameter: 0.625 in. Receiver Tube Size: 2 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank  - 2,000 lb. Capacity - ChromeCURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At CURT, the trailer balls are engineered to be precisely fitted. When we stamp 1-7/8" into the top of each hitch ball, we actually mean 1-7/8".This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.Features: It fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs Ball Diameter: 1-7/8 in. Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 1-5/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

1/2" Hitch Lock with 5/8" Adapter - 1-1/4" or 2" Receiver - Barbell- Stainless SteelMake the tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to be inserted into the fastener hole in the side of a receiver tube to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping a ball mount firmly attached, a CURT hitch lock goes one step further.CURT hitch locks allow users to lock the ball mount into the trailer hitch, deterring theft and preventing anyone from detaching a trailer from the ball mount and towing away from the property without permission. This CURT hitch lock features a barbell design with a stainless finish and comes with a 1/2" pin diameter and a 5/8" diameter adapter sleeve. This allows it to be used on either a 1-1/4" or 2" receiver tube size. CURT barbell hitch locks are comprised of a pin with two end caps and a round locking mechanism. This hitch lock is key-operated and activated with a simple 1/4-turn. Also, the deadbolt hitch lock comes with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of the towing setup. For a boat, ATV, or camper, keep the toys more secure with CURT hitch locks.Features: 1/2" diameter pin fits 1-1/4" x 1-1/4" receiver tubes 5/8" adapter sleeve allows mounting in 2" x 2" receiver tubes Stainless steel construction for lasting rust resistance Easy-to-operate, 1/4-turn lock activation A watertight dust cap prevents internal corrosion Includes two keys for added convenience Specifications: Finish: Polished stainless  Hub Warehouse: D25 Material: Stainless steel Part Type: Hitch lock Pin Diameter: 0.5 and 0.625 inches Receiver Tube Size: 1-1/4 or 2 inches  Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

Towing Starter Kit with 2" Ball - 2" Shank - 7,500 lbs - 4" DropThe towing starter kit by CURT Manufacturing is the most convenient way to get set up with the basic towing gear you will need for a brand-new trailer hitch. The starter kit eliminates the need for you to make multiple purchases and to try to figure out if you are buying the right products to fit your existing equipment. The CURT towing starter kit includes a ball mount, trailer ball, hitch pin and clip, hitch lock, and a rubber receiver tube cover. It has everything you need to get your trailer coupled to your receiver hitch.This kit features a ball mount with a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It measures 8-1/4" long, has 4" of drop, and 2" of rise. CURT ball mounts are CNC-formed and robotically welded to be an exact fit for your towing application. They are built with quality steel for strength and coated with a high-gloss black powder coat finish for durable corrosion and scratch resistance.Features: Rated at 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2" x 2" receiver tube opening Factory-torqued trailer ball accepts 2" couplers CNC-formed, robotically welded, and mechanically descaled for a perfect fit Key-operated hitch lock adds security to your trailer Hitch tube cover protects the receiver from grime and rust when not in use A sturdy, reusable case keeps items well-protected Assembled in the USA Specifications: Includes: Ball mount #45050, trailer ball #40037, hitch lock #23515, hitch tube cover #22272, pin & clip and reusable case Drop 4 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 7,500 lb. Hub Warehouse: D01 Length: 8-1/4 in. Rise: 2 in.  Tongue Weight (TW): 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Reusable case is able to be shelved or hung on pegs*Weight capacity may change if the trailer ball is removed

Read more less

1/2" Hitch Lock with 5/8" Adapter - 1-1/4" or 2" Receiver - Deadbolt - ChromeMake the tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to be inserted into the fastener hole in the side of a receiver tube to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping a ball mount firmly attached, a CURT hitch lock goes one step further.CURT hitch locks allow users to lock the ball mount into the trailer hitch, deterring theft and preventing anyone from detaching a trailer from the ball mount and towing away from the property without permission. This CURT hitch lock features a deadbolt design and comes with a 1/2" pin diameter with a 5/8" diameter adapter sleeve. This allows it to be used on either a 1-1/4" or 2" receiver tube size. CURT deadbolt hitch locks have a solid, square-shaped lock mechanism and a bent handle for easier gripping. This deadbolt hitch lock is key-operated and activated with a simple 1/4-turn. Also, the deadbolt hitch lock comes with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate in towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of the towing setup. For a boat, ATV, or camper, keep the toys more secure with CURT hitch locks.Features: 1/2"-diameter pin fits 1-1/4" x 1-1/4" receiver tubes 5/8" adapter sleeve allows mounting in 2" x 2" receiver tubes Protected by a durable chrome-plated finish Easy-to-operate, 1/4-turn lock activation A watertight dust cap prevents internal corrosion Includes two keys for added convenience Specifications: Finish: Chrome Hub Warehouse: D25 Material: Carbon steel Part Type: Hitch lock Pin Diameter: 0.5 and 0.625 inches Receiver Tube Size: 1-1/4 or 2 inches  Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

ActiveLink 1-1/4" Receiver Shank - Up to 3500 lbsActiveLink is a revolutionary towing solution uniquely designed for an active lifestyle. Its intuitive approach was carefully engineered to allow users to quickly, easily, and securely swap out accessories like never before. Stop struggling underneath the vehicle with awkward hitch accessories and experience the difference with ActiveLink.ActiveLink is all about versatility and ease of use, providing a solid hitch hookup for whatever accessory users need. Simply install the multi-function shank into an existing receiver hitch. Then, choose an accessory, load up the cargo, and start the adventure! Users can select the ActiveLink bike rack, cargo carrier, or other accessory—whichever is needed for the day's activities.Unlike a traditional shank that requires users to get down on their hands and knees and feel around grimy components to line everything up, ActiveLink makes things easy. It has a bottom pivot point on the shank that provides a resting point for the accessory attachment, perfectly lining up the hitch pin holes for an effortless connection. Drop in the accessory or swap it out in a snap. It's that easy.ActiveLink is built for an outdoor, active lifestyle, featuring a strong steel construction and a weather-resistant finish. It also promotes a comfortable towing experience, featuring built-in anti-rattle components for a quieter drive.Features: Unique connections allow users to easily swap out accessories as needed Patent-pending design for fast, secure accessory attachment with a pin and clip The bottom bolt provides an integrated resting point for struggle-free installation Tilt-away feature for easier access to the vehicle cargo area Compatible with ActiveLink bike racks and cargo carrier Anti-rattle hitch pin and anti-rattle hand wheel for reduced noise Plastic interior lining protects against scratches and helps suppress vibration Tested and rated for 3,500 lbs. GTW and 350 lbs. TW Strong steel construction Dual E-coat and carbide black powder coat for lasting weather resistance Notes:Includes shank only (accessories sold separately)Specifications: Finish: Black Powder Coat  Gross Trailer Weight: 3,500 lbs. Hub Warehouse: D25 Installation Time (Exact): 0 Material: Carbon Steel Max Load: 180 lbs. Mount Type Description: Not applicable Product Weight: 5.9 lbs. Tongue Weight: 350 lbs. Receiver Tube Size: 1-1/4 in. Warranty: Limited Lifetime warranty (one-year finish, one-year parts)

Read more less

2-5/16" Trailer Ball - 1" x 2-1/8" Shank - 7,500 lb. Capacity - ChromeOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This 2-5/16" trailer ball features a ball capacity of 7,500 lbs. It features a 1" shank diameter, a 2-1/8" shank length, 0" of rise, and a nickel-chrome finish to protect against the elements. To give you the power you need to tow with confidence, CURT 2-5/16" trailer hitch balls are thoroughly tested for safety and meet U.S. VESC specifications.Features: Fits 2-5/16" couplers and accepts up to 7,500 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 7,500 lbs Ball Diameter: 2-5/16 in. Color: Silver Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 1 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 250 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

HD Rubber Wheel Chock with Handle & Single Trailer MountCURT HD wheel chocks are the perfect accessory for saving space and staying safe. These unique wheel chocks mount to the trailer frame and prevent the need to store them inside a truck or RV. The unique bracket mounts to the trailer frame and includes snap-rings that quickly store wheel chocks out of the way and outside of a vehicle. No more dirty wheel chocks inside the truck or SUV!This HD wheel chock is made from heavy-duty materials and prevents trailer or vehicle movement. The dense rubber construction provides improved traction to prevent chock slippage or movement, and the high-density steel brackets avoid bending or breaking with use. Finished with a weather-resistant liquid A-coat that prevents rusting and corrosion and a bold orange powder coat for durability.The kit includes self-tapping screws for mounting the included bracket to the trailer frame and prevents the need for pre-drilling holes for ease of installation. The snap-ring clips stow away the wheel chocks and prevent the loss of pieces when not in use. Quickly and easily install the bracket and go and store the wheel chocks on a trailer without losing pieces or getting dirty.Features: HD Wheel Chock with Mounting Bracket Quickly mounts the wheel chock to the trailer frame for easy storage Convenient storage prevents dirt inside a truck or RV Snap-ring clip with wire lanyard stores chock and prevents lost pieces Large handles in wheel chock provide easy carrying and use The ridged bottom surface prevents chock slippage and movement Heavy-duty rubber and steel construction provides long-lasting durability Self-tapping screws and trailer frame mounting brackets included Notes:Includes wheel chock (1), bracket (1), snap-ring clips (1), and mounting hardwareSpecifications: Finish: Blank Hub Warehouse: D25 Installation Time (Exact): 0 Material: Recycled rubber Product Weight: 8.590 lbs. Warranty: One-Year Limited Warranty

Read more less

Adjustable Aluminum Roof Rack Kayak HoldersPursue a passion for the water with CURT kayak roof racks. This roof-mounted kayak carrier set is highly versatile, easy to use, and reliably secure for transporting kayaks or paddleboards wherever the adventure leads.This kayak roof carrier is easily adjustable to accommodate virtually any size kayak. The arms fully rotate to be as wide or as narrow as needed to mount all kinds of kayaks, including single kayaks and double kayaks. The rotating arms feature notched pivots to securely lock into place incrementally, keeping the watercraft safely cradled over bumps, hills, and potholes.The CURT kayak roof rack is engineered for universal installation. The mounting brackets easily and securely attach to virtually any roof rack rail, including CURT roof rack cross bars. Installation requires no tools, utilizing quick-release handles and making it easy to attach or detach the kayak carrier whenever needed.To help protect the kayak or paddleboard when mounted, the arms are equipped with integrated foam padding. This helps prevent scuffs, scratches, and other unsightly damage. Additionally, the kayak carrier brackets come with adjustable straps that provide increased security for the kayak during travel.For long-lasting resilience to the elements as well as frequent water exposure at the lake, river, or other bodies of water, CURT roof rack kayak holders are constructed from carbon black powder-coated aluminum. The aluminum tubing is lightweight for easy handling and installation, but it is also strong and highly resistant to corrosion.The CURT kayak roof rack kit is perfect for use as a kayak carrier for a car, van, crossover, SUV, or truck. It is tested and rated for a weight capacity of 75 pounds to accommodate most kayaks and paddleboards. The lightweight design is easy to use as needed, and the rotating arms fold up completely to allow for convenient storage. This package includes two kayak roof rack brackets, straps, attachment hardware, and a storage bag.Features: Lightweight, powder-coated aluminum construction with 75-lb. capacity Rotating arms pivot to fit virtually any size kayak or paddleboard Notched pivot points for precise positioning and locking Universal brackets mount on any roof rack cross bars with no tools required Foam padding protects kayaks from scuffs and scratches Straps loop around the kayak for secure travel Arms fold up in seconds for convenient, compact storage Storage bag included for easy portability and storage Includes:Includes two kayak racks, straps, hardware, and storage bagSpecifications: Finish: Carbide black powder coat Hub Warehouse: D25 Material: Aluminum/stainless assembly Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

Coupler Lock - 1/4" Pin - 7/8" Latch Span - Barbell - ChromeSometimes a safety pin and coupler latch are just not enough to keep the toys safe. While CURT safety pins and coupler latches are made to keep couplers securely latched onto the trailer ball, they are no substitute for the locking power provided by a CURT coupler lock.CURT coupler locks are designed to add security to a trailer and towing equipment. Instead of merely retaining the coupler latch mechanism, it locks it into place and greatly deters any tampering and theft of a trailer while it is coupled to the vehicle. CURT coupler locks are key-operated and come in several different styles to choose from.This coupler lock features a barbell design to keep the pin well-protected from tampering. It comes with a chrome finish and offers a pin span of 7/8" with a pin diameter of 1/4". All CURT coupler locks are made to fit latch-type couplers and include two keys. Protect boats, campers, and even utility trailers the right way with a CURT coupler lock.Features: 1/4" pin fits latch-type couplers with a max span of 7/8" Easy-to-operate, 1/4-turn lock activation A watertight dust cap prevents internal corrosion Protected by a durable chrome-plated finish Includes two keys for added convenience Specifications: Finish: Chrome Hub Warehouse: D25 Part Type: Coupler Lock Span: 7/8 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

Towing Starter Kit with 2" Ball - 1-1/4" Shank - 3-1/4" Drop - 3,500 lbsThis CURT towing starter kit features a class 2 ball mount #45521 with a 1-1/4" x 1-1/4" shank to fit a class 1 or 2 trailer hitch. Like all CURT ball mounts that are made in the USA, the class 2 ball mounts are CNC-formed and robotically welded for clean, accurate weld lines. This class 2 features a powder coat finish and comes with a pre-torqued, chrome-plated 2" trailer ball. It offers a 3-1/4" drop, a gross trailer weight capacity of 3,500 lbs. and a tongue weight rating of 350 lbs.Also included in this towing starter kit is a CURT hitch pin and clip #21403. This hitch pin features a 1/2" diameter and is constructed from solid steel to ensure reliable strength. It also comes with a zinc finish and a grooved end that allows the clip to be inserted at any angle. All CURT 1/2" pins come with a 105-degree bend, making them easier to handle and operate when mounting the ball mount, and will fit any CURT ball mount or hitch-mounted accessory with a 1-1/4" x 1-1/4" shank.For the new hitch owner and towing veteran alike, a CURT towing starter kit is the perfect accessory to bring.Features: Rated at 3,500 lbs. gross trailer weight and 350 lbs. tongue weight Fits trailer hitches with a 1-1/4" x 1-1/4" receiver tube opening Factory-torqued trailer ball accepts 2" couplers The USA-made ball mount is CNC-formed and robotically welded for a perfect fit 2-5/8" rise or 3-1/4" drop for precise trailer leveling 1/2" hitch pin fits any 1-1/4" x 1-1/4" receiver tube A grooved pin allows clip attachment at any angle Ball mount protected by a durable powder coat finish Trailer ball features a polished chrome-plated finish Specifications: Includes: Loaded ball mount #45521, 2" trailer ball #40003, pin & clip Drop: 3-1/4 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 3500 LB Hub Warehouse: D25 Tongue Weight (TW): 350 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Weight capacity may change if the trailer ball is removed

Read more less

2-5/16" Trailer Ball - 1" x 2-1/8" Shank - 7,500 lbs - Stainless SteelThe CURT 2-5/16" trailer ball does not mess around. Simply put, it is a solid piece of towing equipment that makes all others look like they're just spinning their wheels. CURT 2-5/16" trailer balls are made with expert engineering to be packed with strength and durable enough to withstand the harsh wear of heavy-duty towing. Anything a class 5 trailer hitch and class 5 ball mount can handle, CURT has a 2-5/16" trailer ball to match. These tow balls are perfect for towing all types of heavy receiver-style trailers, including dump trailers, toy haulers, farm trailers, chopper boxes, dual-axle utility trailers, deluxe RVs, small yachts, and more. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.).This 2-5/16" trailer ball features a ball capacity of 7,500 lbs. It features a 1" shank diameter, a 2-1/8" shank length, a 0" rise, and a stainless steel finish to protect against the elements. To give users the power to tow with confidence, CURT 2-5/16" trailer hitch balls are thoroughly tested for safety and meet U.S. VESC specifications.Features: Fits 2-5/16" couplers and accepts up to 7,500 lbs. GTW Stainless steel construction for excellent rust resistance Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 7,500 lbs Ball Diameter: 2-5/16 in. Color: Stainless Finish: Polished Stainless Hub Warehouse: D25 Material: Forged Steel Part Type: 2 5/16 in. Trailer Ball Shank Diameter: 1 in. Shank Length: 2 1/8 in. Shank Rise: 0 in. Torque: 250 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank

Read more less

2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lbs. - ChromeOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get users to the destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit a 2" trailer coupler like a hand in a glove. The hitch ball is able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 1-3/4" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give peace of mind while towing to that next destination, CURT also carefully tests the trailer balls and ensures that each one meets U.S. VESC specifications.Features: Fits 2" couplers and accepts up to 3,500 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 3,500 lbs. Ball Diameter: 2 in. Color: Silver Finish: Chrome-plated Hub Warehouse: D25 Material: Forge steel Part Type: 2 in. Trailer ball Shank Diameter: 0.75 in. Shank Length: 1-3/4 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

2" RockerBall Cushion Hitch Trailer Ball - 3500 lbsThe CURT RockerBall™ trailer ball provides improved comfort and enhanced control while towing, featuring our unique ShockDrop™ technology. An integrated cushion isolator allows this hitch ball to turn a standard ball mount into a cushion hitch with anti-rattle capabilities.The RockerBall™ trailer ball dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking, and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy and uncomfortable and taking a toll on your towing system.The RockerBall™ completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount of stress placed on your vehicle, receiver hitch, brakes, and suspension system.The RockerBall™ is also extremely low-maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.The RockerBall™ tow ball retrofits onto a variety of standard ball mounts, virtually any mount with a 2-inch wide trailer ball tongue platform and a 3/4-inch trailer ball hole. The anti-swivel base keeps the hitch ball properly oriented and locked in place when fully torqued.The CURT RockerBall™ hitch ball is constructed from forged steel for exceptional strength. The base is covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance.Features: Dynamic trailer ball featuring ShockDrop technology Dampens jerking and jarring from bumps and potholes for smoother towing Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Retrofits onto most existing ball mounts to improve current towing experience Virtually maintenance-free with no airbag or bearings to service Grease zerk fittings provide easy lubrication Anti-swivel base fits 2" wide ball mount tongues with 3/4" diameter hole Forged steel construction for dependable towing power Durable carbide black powder coat finish on base and chrome plating on ball Standard trailer ball diameter fits 2" couplers Rated for 3,500 lbs. gross trailer weight Tested for safety to meet SAE J684 specifications Specifications: Patent: # 11,192,408 Ball Capacity: 3,500 lbs Ball Diameter: 2 in. Finish: Chrome Hub Warehouse: D25 Material: Forged steel Shank Diameter: 2 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Ball mount sold separately (not compatible with Rebellion XD ball mount)*The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger than the diameter of the threaded shank

Read more less

1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lbs. - ChromeCURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches the coupler size is essential. At CURT, the trailer balls are engineered to be precisely fitted. When CURT stamps 1-7/8" into the top of each hitch ball, CURT means 1-7/8".This CURT tow ball features a ball capacity of 2,000 lbs. It can tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment can handle the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, CURT's 1-7/8" balls are tested for users’ safety and meet all U.S. VESC specifications.Features: Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs. Ball Diameter: 1-7/8 in. Color: Silver Finish: chrome-plated Hub Warehouse: D25 Material: Forge steel Part Type: 1-7/8 in. Trailer ball Shank Diameter: 0.75 in. Shank Length: 1-5/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

2" Trailer Ball - 1" x 2-1/8" Shank - 7,500 lbs. - ChromeOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get users to the destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit a 2" trailer coupler like a hand in a glove. The hitch ball can tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These hitch balls are an excellent extension of class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) This particular 2" trailer ball offers a ball capacity of 7,500 lbs. It features a 1" shank diameter, a 2-1/8" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give users peace of mind while towing to the next destination, CURT also carefully tests the trailer balls and ensure that each one meets U.S. VESC specifications.Features: Fits 2" couplers and accepts up to 7,500 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 7,500 lbs. Ball Diameter: 2 in. Color: Silver Finish: Chrome-plated Hub Warehouse: D25 Material: Forge steel Part Type: 2 in. Trailer ball Shank Diameter: 1 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 250 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

Zinc Plated Steel Receiver Pin with Clip The corrosion resistant zinc plated steel receiver pin ensures your ball mount or other hitch-mounted accessories stays securely engaged to your trailer hitch. Hitch pin clip included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

S-Hook Keepers (Pair) - BlackProduct DescriptionThis handy rubber keeper provides an extra measure of safety for the safety chain by preventing the S-hook from bouncing out when you're driving on bumpy roads. Sold in pairs S-hook not included WARNING: This product can expose you to chemicals including CADMIUM which is known to the State of California to cause cancer or other reproductive harm, and di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Receiver Lock 5/8" for 3" Square Class V Receivers Sleeved to 3/4' Dogbone StyleThe Draw Tite  5/8 In. diameter dogbone lock is primarily designed for towing for securing class V towing ball mounts that have a 3 In. sized receiver tube.Features: For use with 3 In. square shanks Class V Bright zinc finish 4 In. span Traditional flat key Always write down your key number Sleeve to 3/4 inch WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Galvanized Coupler Lock Pin - 5/16" Square coupler pins add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Electrogalvanized steel construction for corrosion resistance. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

FasTen Leveling Blocks XL with T-Handle - 2x2 - Grey *10-PackThe Camco FasTen XL Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. The larger size has an increased weight capacity of blocks individually and in a stack, and also provides more surface area for leveling. Each block adds a full inch to stack height. Camco’s FasTen XL Leveling Blocks can be used with single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handle secures blocks together for storage and easily pulls up for carrying, or pushes down for more compact storage. Individual block measures: 10.5” x 10.5” x 1.5”. Stack height should not exceed 4-1/2 inches.Features: The larger 10.5” x 10.5” design withstands more weight and creates more surface area for leveling 10 interlocking blocks stack to the desired height for customizable leveling Carrying handle easily twists to secure blocks together for storage Strong and durable construction Safe and easy to use

Read more less

2.5" Center Hub - Matte BlackThe centerpiece in the well-designed ROCK TAMERS 2.5" Hub Mudflap System.Features: Replacement hub Fits a 2.5" hitch Bolt Kit RT052 x 2 units may be needed to secure the hub Matte Black with forged aluminum *Sold as an IndividualWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Brass Coupler LockMakes your trailer virtually theft-proof, whether it's on or off the car. Brass coupler lock prevents theft and accidental uncoupling. Brass Solid cast and heat treated for toughness Corrosion resistant Fits standard trailer coupler lock levers 1/4" lock pin 3/4" wide opening Comes with 2 keysWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stabilizer Jack Pads - Rubber - 6.2" x 6.2" *4-PackThe Camco recycled rubber stabilizer jack pads help prevent jacks and stabilizers from sinking into soft ground. The flexible material is great for use on uneven surfaces such as gravel, tree roots, and rough earth because it absorbs uneven pressure instead of cracking or wobbling. Recycled rubber stabilizer jack pads are UV resistant, weather-proof, and constructed of recycled materials. Nests perfectly with most stack jacks. Each pad measures 6.5" x 9" X .75". Set of 4.Features: Helps prevent jacks and stabilizers from sinking into soft ground Can be used on uneven surfaces such as gravel, tree roots, etc. Compatible with Camco stabilizer jacks and plastic jack pads, the pad surface is 6.2” x 6.2” Integrated handle for ease of use, included strap for storage Constructed of recycled materials, UV resistant and weather-proof

Read more less

Motor SupportSupports the cantilevered weight of the motor.Features: Cast aluminum head with high-strength aluminum shaft Stabilizes engine and steering mechanism when trailering Varying adjustability Includes 15″ black EPDM rubber holding strap Bolt-on & over the roller strap-on Warranty: 5 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less