GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.Specifications: Dimensions (DxH): (inch) 3-19/32" x 1-5/18" / (mm) 91.6 x 49.5  Weight: 7.1 oz / 201 g. Temperature Range: -22° F to 176° F / -30° C to 80° C Case Material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7 What's In The Box? GA 38 Surface mounting bracket Pole mounting bracket Under-deck mounting bracket Mounting hardware BNC-SMA antenna cable (32 ft/10m) Installation instructions Specifications: Type: Antennas Box Dimensions: 4"H x 4"W x 6"L WT: 0.8 lbs UPC: 753759318703

Read more less

External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external antenna giving the antenna a clear view of the sky. The GPA680 comes with an antenna, 5M (16') cable, and mounts.

Read more less

Cortex® H1 Handset Cradle (Gen 2)This non-powered cradle securely holds the Cortex H1 tethered or Cortex H1P portable handsets.

Read more less

Antenna Cable for Cortex® V1 & M1Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS.Features: Cable fitted for Cortex® V1 & M1 32' cable Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 6"L WT: 0.8 lbs UPC: 753759319311

Read more less

Charging Handset Cradle for Cortex H1P Portable HandsetMount your H1P (portable) handset anywhere on the boat where 12-24vDC can be reached. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. The charging connectors are gold-plated preparing for the elements and suitable for mounting outdoors. Specifications: Type: Chargers Box Dimensions: 1"H x 4"W x 6"L WT: 0.1 lbs UPC: 0793618020293

Read more less

External Weatherproof Single Speaker for Cortex M1 Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing.Features: 3” 70 Watt Speaker Frequency response of 80Hz-18Khz 4 Ohms impedance UV resistant polymer housing IP66 water-resistant for marine applications Polypropylene cone Heavy-duty molded ABS plastic basket and grill construction Rear plastic water guard housing protects magnet and internal components Surface installation 75mm (2 1/8”) cut out  Supplied with 2m (6.5ft) or cable Single speaker Specifications: Type: Speakers Box Dimensions: 4"H x 4"W x 4"L WT: 0.85 lbs UPC: 793618020231 Quick Guide (pdf)

Read more less

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place it won't fall out due to vibration or shock.Features: 1 x Waterproof mini connector (IPx7 rated) 1 x Standard USB-A PC connector 5M (16') in length

Read more less

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

Read more less

Splitter Patch 2M Cable for Cortex M1 to External VHF2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1. Specifications: Type: Cables Box Dimensions: 1"H x 6"W x 8"L WT: 0.25 lbs UPC: 0793618020330

Read more less

Bulkhead Connector Kit for Cortex H1Adding a station for your Cortex H1 is as easy as mounting the bulkhead connector kit and connecting it to 12-24 VDC. Specifications: Type: Misc Box Dimensions: 1"H x 3"W x 4"L WT: 0.05 lbs UPC: 0793618020361

Read more less

Replacement External WiFi Antenna for Cortex M1Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters.

Read more less

Cellular Low Loss Cable for Cortex - 5M (16')Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail. Specifications: Type: Cables Box Dimensions: 4"H x 7"W x 10"L WT: 1.25 lbs UPC: 0793618020385

Read more less

Protective Cover for Vision AIS DisplaysProtective cover designed to fit firmly over the Vision AIS display. It will protect your Vision AIS against harsh sunlight, sea spray, and even light knocks. It is a form-fitting cover molded in a way that will hold its shape, unlike some other display protectors. The pull tab is designed as a loop that can also be used as a tether point if you require a lanyard to ensure the cover never gets lost.

Read more less