Yamaha Jet Boat Custom 25' – 850lb Ballast Bag - GreyAdd 850lbs to the rear of your Yamaha with the FatSac Yamaha Jet Boats Custom for 25' Yamaha boat models.The FatSac High Yamaha Jet Boats Custom 25 FatSac is designed to be tied down to the swim platform step of your 25' Yamaha, adding 850lbs to the rear of your boat so you can get wake surfing.Fits 2017 and newer 25' Yamaha BoatsFeatures: Adds 850lbs of Ballast Includes plug and W730 fitting for use with the FATSAC Supa Tsunami Pump Includes 4 built-in anchor points so you can secure this to the platform (tie-downs not included) In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 7"H x 11"W x 15"L WT: 9.75 lbs UPC: 817177024216 Brochure (pdf)

Read more less

10' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Side Sac Ballast Bag - Pair - 260lbs Each - GrayThis set of two 260 lb ballast bags are great for adding weight in compact compartments such as the ski locker, under seats, or next to direct drive motor.The FatSac Side ballast bags fit along the side of the engine compartment on direct drive inboard boats but will also fit under the seats and in compact storage compartments in many boats making them ideal for stashing weight where it will be hidden.One of the more versatile wakeboard ballast bag sizes from FatSac, the Side Sac Set can be used in multiple locations throughout the boat to add additional ballast where it's neededSold as a pair, for extra value.Features: Side Sac (Set) 260 lbs each 48 x 12 x 12 inches In the Box: Ballast Bag x 2 Six Valves/Caps (W731 x 2, W749 x 2 and W730 x 2) *Sold as a PairWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 9.2 lbs UPC: 817177020348 Brochure (pdf)

Read more less

5' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

V-drive Wakesurf Fat Sac Ballast Bag - 400lbs - GrayThe FatSac V-Drive ballast bag is a perfect option for mid-size ballast bags.As FatSac's most versatile sac, the V-Drive Fat Sac can be used nearly anywhere in the boat.Place it in the bow, the walk way, on a seat, beside a seat, or in a storage locker to enhance the wakeboard or surf wake behind your boat. The V-Drive Wake Surf Sac is the same bag that is sold in a pair as the W701 Series of ballast bags.Features: V-drive Fat Sac 42 x 16 x 16 inches In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1)  *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 6 lbs UPC: 817177020645 Brochure (pdf)

Read more less

5' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Yamaha Jet Boat Custom 27' – 1,200lb Ballast Bag - GreyAdd 1,200lbs to the rear of your Yamaha with the FatSac Yamaha Jet Boats Custom for 27' Yamaha boat models.The FatSac High Yamaha Jet Boats Custom 27 FatSac is designed to be tied down to the swim platform step of your 27' Yamaha, adding 1,200 lbs. to the rear of your boat so you can get wake surfing.Fits 2017 and newer 27' Yamaha BoatsFeatures: Adds 1,200lbs of Ballast Includes plug and W730 fitting for use with the FATSAC Supa Tsunami Pump Includes 4 built-in anchor points so you can secure this to the platform (tie-downs not included) In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 7"H x 13"W x 16"L WT: 11.8 lbs UPC: 817177024230 Brochure (pdf)

Read more less

20' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Tube Fat Sac Ballast Bag - 370lbs - GrayThanks to its long and narrow shape, the FatSac Tube Sac is perfect for adding 370lbs of hidden ballast.The FatSac Tube Sac is the perfect shape for ski locker found in the floor of most boat. It's longer and narrow profile also make it incredibly versatile for use in other areas of the boat, such as the bow walk-way, or in storage compartments and under seats.  There's a reason this is one of our most popular bags; it's incredibly versatile, and will fit in a number of locations depending on where you need ballast.Whether you need additional weight up front for wakeboarding or if you need additional ballast under seats in the midship for surfing, the Tube Sac is the perfect size to fit in most ski and wakeboard boats.Features: Tube Sac 62 x 16 x 10 inches In the Box: Ballast Bag Three Valves/Caps (W731 x 1, W749 x 1 and W730 x 1) *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 6.2 lbs UPC: 817177020409 Brochure (pdf)

Read more less

10' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Open Bow Triangle Fat Sac Ballast Bag - 650lbs - GrayThe FatSac Series Open Bow Sac is triangular in shape and fits open bow boats. Place it up front and fill it for a huge improvement in wake transition and density. The shape of this sac allows the ability to fine-tune the forward and aft weight distribution.The FatSac Open Bow Sac is triangular in shape and is designed to completely fill the open bow area. Place it up front and fill it for a huge improvement in wake transition and density. The shape of this bag allows the ability to fine-tune the forward weight distribution by partially filling.This bag adds a lot of weight, so it should only be used if you have an equal amount of weight in the back of the boat. In conjunction with more weight in the rear, adding 650lbs of weight to the front of the boat will make the wake deeper with a longer and smoother transition. Features: Open Bow Triangle Conforms to fit in open bow In the Box: Ballast Bag Three Valves/Caps (W731 x 1, W749 x 1 and W730 x 1) *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 9.7 lbs UPC: 817177020522 Brochure (pdf)

Read more less

Integrated Bow Fat Sac Ballast Bag - 425lbs - GrayThe FatSac Series Integrated Bow Sac makes for a quick and easy solution to add critical weight in the front of the boat for improved wake performance.The FatSac Series Integrated Bow Sac is designed to fit under the seats of open bow boats adding needed weight to the front of the boat for the perfect weight distribution. It will fit under the seats of any open bow boat so it's out of the way and the bow seating is still available.It's a common misconception that weight in the rear of the boat is what it takes to build a great wake.While weight positioned towards the rear of the boat is definitely important, it's actually critical that the amount of ballast added to the boat be distributed evenly from the front to the rear.  That makes the FatSac Integrated Bow ballast bag  a very important ballast upgrade on just about every boat, whether you're concentrating on surfing, wakeboarding, or both.By far one of the most popular wakeboard ballast bags, the Integrated Bow Sac is the perfect companion bag to maintain proper wake shape and boat handling characteristics if you plan on adding a significant amount of weight to the back of the boat.  This bow bag will hold 425 lbs fully loaded.Features: Integrated Bow Sac Body: 20 x 29 x 12 inches Arms: 32 x 12 x 12 inches In the Box: Ballast Bag Five Valves/Caps (W731 x 3, W749 x 1 and W730 x 1) *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 7"H x 13"W x 18"L WT: 8.5 lbs UPC: 817177020584 Brochure (pdf)

Read more less

15' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Original Ballast Bag - 750lbs - GrayThe FatSac Original 750 lb is the most popular wakeboard ballast bag of all time and a great universal bag for many boats.There's a reason the FatSac wakeboard ballast bag is continually one of our best selling products; it offers a huge amount of weight for a great price, in a very versatile size.  Looking for a better surf wake from your direct drive or v-drive boat?  Want a better wakeboard wake or need more weight in the front of the boat?  The FatSac works in almost any common location for nearly every application, which means chances are, it's the ballast bag you've been looking for.The FatSac Ballast Bag is the original ballast bag that redefined new standards of weighting a wakeboard boat. The versatility of its size is the secret to the FatSac's success, it's the sweet spot for volume versus weight, which means it will fit in almost any boat, and offer a huge increase in wake size.Features: Highest Quality HeyTex layered materials UV resistant Double welded seams with seam tape for highest quality and strength. Each sac comes with the fittings needed to use the over the side supa pump. Just switch out the fittings to plumb the bags into an automatic fill/empty system Offered in Black or Gray (other colors available for additional cost) Sacs can be personalized with custom printing (for an additional cost) Sit, Stand and walk across full sacs with no issue. Size: 750 lbs. = 50" x 20" x 20" In the Box: Ballast Bag  Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 8 lbs UPC: 817177020164 Brochure (pdf)

Read more less

Yamaha Jet Boat Custom 19' - 650 Pound Ballast Bag - GreyAdd 650 lbs to the rear of your Yamaha with the FatSac Yamaha Jet Boats Custom 19 for 19' Yamaha boat models.The FatSac High Yamaha Jet Boats Custom 19 FatSac is designed to be tied down to the swim platform step of your 19' Yamaha, adding 650 lbs to the rear of your boat so you can get wakesurfing.Fits 2017 and newer 19' Yamaha BoatsFeatures: Adds 650 lbs of Ballast Includes plug and W730 fitting for use with the FATSAC Supa Tsunami Pump Includes 4 built-in handles so you can secure this to the platform (tie-downs not included) In the Box: Ballast Bag Three Valves/Caps (W731 x 1, W749 x 1 and W730 x 1) *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP),Diisononyl Phthalate (DINP) which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 14"W x 16"L WT: 6.9 lbs UPC: 817177023196 Brochure (pdf)

Read more less

Yamaha Jet Boat Custom 21' - 725 Pound Ballast Bag - GreyAdd 725 lbs to the rear of your Yamaha with the FatSac Yamaha Jet Boats Custom 21 for 21' Yamaha boat models.The FatSac High Yamaha Jet Boats Custom 21 FatSac is designed to be tied down to the swim platform step of your 21' Yamaha, adding 725 lbs to the rear of your boat so you can get wakesurfing.Fits 2017 and newer 21' Yamaha BoatsFeatures: Adds 725 lbs of Ballast Includes plug and W730 fitting for use with the FATSAC Supa Tsunami Pump Includes 4 built-in handles so you can secure this to the platform (tie-downs not included) In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP),Diisononyl Phthalate (DINP) which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 13"W x 16"L WT: 8.65 lbs UPC: 817177023189 Brochure (pdf)

Read more less

15' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Yamaha Jet Boat Custom 24' - 800 Pound Ballast Bag - GreyAdd 800lbs to the rear of your Yamaha with the FatSac Yamaha Jet Boats Custom 24 for 24' Yamaha boat models.The FatSac High Yamaha Jet Boats Custom 24 FatSac is designed to be tied down to the swim platform step of your 24' Yamaha, adding 800lbs to the rear of your boat so you can get wakesurfing.Fits 2017 and newer 24' Yamaha BoatsFeatures: Adds 800 lbs of Ballast Includes plug and W730 fitting for use with the FATSAC Supa Tsunami Pump Includes 4 built-in handles so you can secure this to the platform (tie-downs not included) In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP),Diisononyl Phthalate (DINP) which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 8"H x 14"W x 17"L WT: 9.35 lbs UPC: 817177023172 Brochure (pdf)

Read more less

Rear Seat/Center Locker Ballast Bag - 650lbs - GrayThe FatSac Seat / Center Locker Sac is a versatile ballast bag that works well in place of the rear seat on inboards, in the center locker, or anywhere else it fits.The FatSac Center Locker/Rear Seat Sac is one of the most versatile wakeboard ballast bags that FatSac currently offers, finding a perfect home in many locations throughout the boat. Its low profile design means it will fit in many storage areas including the center locker, under seat storage, or in place of the rear seat, yet the generous length and width add up to 650 lbs. of ballast. Thanks to great design and construction, sitting, standing or walking on the bag is perfectly fine.Features: Rear Seat Bottom / Center locker sac 62 x 26 x 10 inches In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 8.3 lbs UPC: 817177020461 Brochure (pdf)

Read more less

V-drive Fat Sacs - Pair - 400lbs Each - GraySold as a set of two 400 lb ballast bags, the FatSac Series V-Drive Sacs Set works well in the rear lockers of v-drive boats or split up with one bag in the bow of the boat and one in the rear area.The FatSac Series V-Drive Sacs are sold as a set and are designed to fit in the compartments on either side of the engine in v-drive boats.  The V-drive ballast bags are perfect for building massive wakeboarding and wakesurfing wakes.  A pair of V-drive sacs also works great on either side of the engine in a direct drive boat for a great wakeboard wake, or put one on the side of the engine, and one between the engine and rear seat for a perfectly surfable wave.Features: Highest Quality HeyTex layered materials. UV resistant Double welded seams with seam tape for highest quality and strength. Each sac comes with the fittings needed to use the over the side supa pump Just switch out the fittings to plumb the bags into an automatic fill/empty system Offered in Black or Gray (other colors available for additional cost) Sacs can be personalized with custom printing (for an additional cost) Sit, Stand and walk across full sacs with no issue. Size: 400 lbs. eaach (800 lbs. total) = 42" x 16" x 16" In the Box: Ballast Bag x 2 Eight Valves/Caps (W731 x 4, W749 x 2 and W730 x 2) *Sold as a PairWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 10.9 lbs UPC: 817177020225 Brochure (pdf)

Read more less

Brick Fat Sac Ballast Bag - 155lbs - GrayThe compact size of the FatSac Fat Brick makes it small enough to stash anywhere, but it offers enough capacity to balance the weight distribution within any type of boat.If you constantly struggle to keep the weight in your boat balanced, the FatSac Fat Brick is for you. Have a lot of batteries or a big stereo that makes the boat always lean to one side? This 155lb. ballast bag is compact and makes it easy to adjust the weight in the boat from side to side so that you always have a clean wake with no wash.Offset the driver's weight when Slalom Skiing with this 155 lbs. square ballast bag.Features: Highest Quality HeyTex layered materials. UV resistant Double welded seams with seam tape for highest quality and strength. Each sac comes with the fittings needed to use the over the side supa pump Just switch out the fittings to plumb the bags into an automatic fill/empty system Offered in Black or Gray (other colors available for additional cost) Sacs can be personalized with custom printing (for an additional cost) Sit, Stand and walk across full sacs with no issue. Size: 155 lbs. = 16" x 16" x 16" In the Box: Ballast Bag Two Valves/Caps (W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 4.3 lbs UPC: 817177020287 Brochure (pdf)

Read more less

20' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

1-1/8" Barbed In-Line Check Valve with O-Rings for Auto Ballast SystemControl the flow of water in an integrated wakeboard ballast system with this 1 1/8" in-line check valve.Designed for use in automated ballast systems, this 1 1/8" check-valve features barbed ends for easy installation into 1 1/8" wakeboard ballast hose. Flow through design reduces restriction so you can spend more time wakeboarding, and less time filling ballast bags.*Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 3"H x 3"W x 5"L WT: 0.3 lbs UPC: 817177021581 Brochure (pdf)

Read more less

Flow-Rite 3/4" Elbow Quick Connect Socket for Auto Ballast SystemFeatures:These connect to FatSacs W736, custom machined fittings*Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 3"W x 4"L WT: 0.05 lbs UPC: 817177021475 Brochure (pdf)

Read more less

3/4" Quick Release Connect with Suction Stopping TechnologyFeatures: Unique version of the standard male Quick Connect fitting with their "suction stopping" technology.  Sac Valve Threads w/O-Rings For Auto Ballast Systems *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.1 lbs UPC: 817177023134 Brochure (pdf)

Read more less

Flow-Rite 1-1/8" Straight Quick Connect Socket for Auto Ballast SystemFeatures: They also fit 1.0" Diameter hose These connect to FatSacs W743, W743-SS, W743-DOUBLE, & W748 custom machined fittings *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.05 lbs UPC: 817177021468 Brochure (pdf)

Read more less

Female Quick Connect with CapThe standard connector that comes with every FatSac ballast bag and allows you to connect various FatSac Quick Twist adapters.  Fitting system comes with the Quick Twist adapter and the Quick Twist Cap connected together for ease of use.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac ballast bag a quick and simple task.  No more struggling with old waterbed valves and water spilling inside the boat.  Simply twist, pull, replace and you're ready to go! Features:Sac valve threads*Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 817177021352 Brochure (pdf)

Read more less

Supa Pump 3.0 with Inline SwitchSuper Fast! Super lightweight, easy to use over the boat pump! Now with an in-line on-off switch! Bigger hose for faster fills! Compatible with all FatSac bags!The Supa also comes with a helically reinforced hose that prevents kinks. The hose has also been extended to 12 1/2’ to accommodate larger boats and deeper hulls. We have also lengthened the power cord to 15’ as boats continue to get longer. The plug has been upgraded to stainless steel to prevent the rust and corrosion we saw on previous models. It has custom-machined FatSac brand fittings, making it directly compatible with the cap and chain fitting on your FatSacs.Specifications: Lightest and fastest pump available from start to finish Even faster than our Supa Tsunami Fill bags in minutes Bigger hose for fast fills! 12.5’ long hose to accommodate deeper hulls and longer boats 15’ long power cord perfect for longer boats Stainless steel outlet adapter to prevent rust/corrosion Now with an in-line on-off switch Custom machined fittings to increase flow - compatible with the W730 fitting provided in all stock bags or available for purchase under 'FITTINGS' The pump is compatible with older FatSac bags

Read more less

Check Valve and AdapterThe FATSAC Check Valve and Adapter is a two part fitting that replaces the FATSAC Quick Twist/Sac Thread Adapter that comes with ballast bags.The FATSAC Check Valve and Adapter is an optional upgrade for FATSAC ballast bags that replaces the standard Quick Twist Adapter.  Just as easy to connect and disconnect as the standard fitting, the W744 Check Valve adapter also features an integrated check to prevent water from exiting the bag when disconnecting and connecting the pump for filling or draining.Features: Air Inflation Valve - simply use a standard air pump to inflate Includes all O-rings needed, and by-pass adapter fitting for emptying water Manual 1 way check valve when manually filling bags with Supa Pump  *Sold as in individualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 3"W x 3"L WT: 0.45 lbs UPC: 817177021529 Brochure (pdf)

Read more less

Wally Plug with O-RingsFatSac Replacement Ballast Bag Plug is used to plug unused holes on FatSac ballast bags. Fits the proprietary thread pattern used on FatSac bags making a perfect water-tight seal that won't leak or back out over time.Off-the-shelf FatSac ballast bags include the required number of bag plug fittings, but if you're misplaced one or want to have extras, this is the fitting you need to close any unused holes on the bag.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac a quick and simple task. Features: Wally plug O-ring *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 817177021376 Brochure (pdf)

Read more less

Flow-Rite 1-1/8" Elbow Quick Connect Socket f/Auto Ballast SystemFeatures: Also fit 1.0" Diameter hose These connect to FatSacs W743, W743-SS, W743-DOUBLE, & W748 custom machined fittings *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 3"W x 4"L WT: 0.05 lbs UPC: 817177021482 Brochure (pdf)

Read more less

Rope LadderAttwood's 5-step, white boarding ladder. Sturdy 11-3/4" blow molded steps, textured step surface and steps connecting by a nylon rope with a top loop to secure to a cleat or a railing.Features: Non-anodized aluminum tubing Polyethylene steps 11" hooks and support legs Folds flat for storage Sturdy 11-3/4" blow molded steps Textured step surface for sure footing Steps connected by a nylon rope with top loop that quickly secures to cleat or railing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Female GHT-Male Quick Connect with O-RingsFeatures: Female GHT Male quick connect  O-Rings Included *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 2"L WT: 0.05 lbs UPC: 817177021383 Brochure (pdf)

Read more less

Board Rack Mounts - 2.38" Pipe Clamp - SilverBoard Rack Mounts will fit your 2.38" tube tower.  Machined from aerospace-grade billet aluminum. Electropolished and anodized for years of maintenance-free use.  These will pair perfectly with all PTM Watersports Board Racks.Mounting hardware included.Board rack not included.*Sold as a Pair Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 10"W x 13"L WT: 5.8 lbs UPC: 856099004852

Read more less

High-Pressure Verifier GaugeEasily and accurately read the exact pressure of your SUP, boat, or other inflatable. Connects to standard high-pressure HR valves. For high pressure up to 20 PSI.

Read more less

Low-Pressure Verifier GaugeEasily and accurately read the exact pressure of your SUP, boat, or other inflatable. Connects to standard high-pressure HR valves. For low pressure up to 9 PSI. 

Read more less

SUP D-Ring & Bungee KitThis kit is suitable for all Solstice Watersports SUPsIn the Box: 96" of 1/4" bungee cord 4 stainless D-rings & anchor pads 1 fl. oz. of vinyl cement

Read more less