Bilge-B-Dry Quad Pump 24v Dry Biilge SystemModel: BBD-2025-244 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 0.7 amps (24 vdc) Idle Current 0.03 amps (24 vdc) Pump Maximum flow 1.0 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ hours Control board Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 2.4 LB (not including tubing, pickup, or accessories) Tubing Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 24 vdc (20 — 26 vdc) What's in the Box: Four motors/diaphragm pumps 20 feet of input tubing provided (PVC or PU) - ¼" OD 6 feet of output tubing provided (PVC or PU)-3/8" OD

Read more less

Bilge-B-Dry Quad Pump 12v Dry Biilge SystemModel: BBD-2025-124 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 1.4 amps (12 vdc) Idle Current 0.05 amps (12 vdc) Pump Maximum flow 1.0 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ hours Control board Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 2.4 LB (not including tubing, pickup, or accessories) Tubing Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 12 vdc (8 — 14 vdc) What's in the Box: Four motors/diaphragm pumps 20 feet of input tubing provided (PVC or PU) - ¼" OD 6 feet of output tubing provided (PVC or PU)-3/8" OD

Read more less

Quad Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Quad Pump 12VDC:Four motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases. Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.4 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 1.0 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 2.4 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

Bilge-B-Dry Triple Pump 24v Dry Biilge SystemModel: BBD-2025-243 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 0.5 amps (24 vdc) Idle Current 0.03 amps (24 vdc) Pump Maximum flow 0.75 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ hours Control board Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 2.2 LB (not including tubing, pickup, or accessories) Tubing Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 24 vdc (20 — 26 vdc) What's in the Box: Three motors/diaphragm pumps 20 feet of input tubing provided (PVC or PU) - ¼" OD 6 feet of output tubing provided (PVC or PU)-3/8" OD

Read more less

Bilge-B-Dry Triple Pump 12v Dry Biilge SystemModel: BBD-2025-123 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 1.0 amps (12 vdc) Idle Current 0.05 amps (12 vdc) Pump Maximum flow 0.75 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ Control board Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 2.2 LB (not including tubing, pickup, or accessories) Tubing Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 12 vdc (8 — 14 vdc) What's in the Box: Three motors/diaphragm pumps 20 feet of input tubing provided (PVC or PU) - ¼" OD 6 feet of output tubing provided (PVC or PU)-3/8" OD

Read more less

Triple Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Triple Pump 12VDC:Three motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications:Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.0 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.75 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L  Weight 2.2 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

Bilge-B-Dry Dual Pump 24v Dry Biilge SystemModel: BBD-2025-242 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 0.37 amp (24 vdc) Idle Current 0.03 amp (24 vdc) Pump Maximum flow 0.50 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ hours Control board Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 2.0 LB (not including tubing, pickup, or accessories) Tubing Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 24 vdc (20-26 vdc) What's in the Box: Two motors/diaphragm pumps 10 feet of input tubing provided (PVC or PU) - ¼" OD 6 feet of output tubing provided (PVC or PU)-3/8" OD

Read more less

Bilge-B-Dry Dual Pump 12v Dry Biilge SystemModel: BBD-2025-122 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 0.73 amps (12 vdc) Idle Current 0.05 amps (12 vdc) Pump Maximum flow 0.50 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ hours Control board Wireless Connectivity Yes Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 2.0 LB (not including tubing, pickup, or accessories) Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 12 vdc (8 — 14 vdc) What's in the Box: Two motors/diaphragm pumps 10 feet of input tubing (diameter (PVC or PU) - ¼" OD) 6 feet of output tubing (diameter (PVC or PU)-3/8" OD)

Read more less

Dual Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina! Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical).  Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.   An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water.BBD Dual Pump 12VDC:Two motors/diaphragm pumps10 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup.  BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 0.73 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.50 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L  Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 2.0 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

Bilge-B-Dry Single Pump 12v Dry Biilge SystemModel: BBD-2025-121 The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation! An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc. Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. Pump diaphragm design can run dry for extended periods of time without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices. Quick disconnect wiring harness with optional "trigger" connection to a helm switch, float switch or water sensor. An environmentally friendly low-profile bilge water pickup design with a replaceable filter system. Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Specifications Max current 0.35 amps (12 vdc) Idle Current 0.05 amps (12 vdc) Pump Maximum flow 0.25 GPM Pump head 10 feet Pump suction 5 (vertical) feet Diaphragm design Able to run dry for extended periods without damage Life expectancy 1000+ hours Control board Wireless Connectivity Yes Life expectancy 100,000 cycles Wi-Fi & RF Grant FCC Rule Part 15C Dimensions (in) Enclosure 4.1 H x 6.8 W x 7 L Rectangular Pickup 0.98 H x 2.4 W x 3.9 L Weight 1.8 LB (not including tubing, pickup, or accessories) Input tubing 1/4" Outer Diameter Output tubing 3/8" Outer Diameter Input Voltage 12 vdc (8 — 14 vdc) What's in the Box: One motor/diaphragm pump 10 feet of input tubing (diameter (PVC or PU) - ¼" OD) 6 feet of output tubing (diameter (PVC or PU)-3/8" OD)

Read more less

Bilge-B-Dry Builge Water Pickup (2-Pack)Model: BWP-2023-001Our uniquely designed low-profile bilge water pickup with a replaceable filter helps reduce harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. If water flow is reduced, this area can easily be wiped clean. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which unlike other dry bilge systems, eliminates the need for a secondary filter. Please note: large amounts of petroleum (oil or diesel) will quickly saturate the pickup filter material and impact flow performance.Includes TWO (2) low-profile bilge water pickups. Does not include stainless hold-down bracket. Brackets sold separately.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups every three months in season.Specifications Dimensions (inches) 0.98 H x 2.4 W x 3.9 L Dimensions (mm) 25 H x 60 W x 100 L What's in the Box:Low-profile bilge water pickup (qty 2)

Read more less

Bilge-B-Dry Filter Material for PickupModel: FM-2024Are you looking to replace your low-profile bilge water pickup? No need to discard or throw away the pickup enclosure! Replacing the internal filter material is easy and helps reduce plastic waste.1. Separate bottom plate from enclosure 2. Remove and discard old material 3. Install sponge in the center 4. Place the oil absorbent material over the sponge 5. Snap the bottom plate back into placeThe filter material must be re-installed in the order it was removed with all material to prevent pump clogging and damage.What's in the Box:Four (4) sponges and Four (4) oil absorbent pads.

Read more less

Bilge-B-Dry Stainless Steel BracketModel: SSHD-001Stainless hold-down bracket for low-profile bilge water pickups. (Qty 1 Bracket per order)Use the stainless hold-down bracket to help secure your low-profile bilge water pickup, if neededBRACKETS ARE NOT INCLUDED WITH BILGE-B-DRY ORDERS

Read more less

Stainless Hold-Down BracketStainless hold-down bracket for low-profile bilge water pickups. BRACKETS ARE NOT INCLUDED WITH BILGE-B-DRY ORDERS. If needed, use the stainless hold-down bracket to help secure your low-profile bilge water pickup.Specifications: Dimensions (inches): Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm): Rectangular Pickup: 50 H x 60 W x 100 L

Read more less