Rocker Stopper Boat StabilizerRocker Stoppers help dampen the rocking motion of boats at anchor. Simply tie Rocker Stoppers approximately 44 cm (18″) apart, making a string of them, with a 5-10 pound weight attached at the bottom of the string. Hang one string off each side of the boat. Just four units per side are what it takes on most boats to 36′. Be sure you hang them where they will always be underwater. Many people use mushroom anchors with their Rocker Stoppers because this type of weight nests well inside the last Rocker Stopper in your string. Use 10 mm (3/8″) braided nylon or 3-stranded nylon line.Use without a weight (or with a reduced weight) for drift fishing. Rocker Stoppers will slow down drift substantially. They are also great to use at the end of a dock to stabilize the tip from rocking. Rocker Stoppers nest together and each one is 33 cm (14″) in diameter.It’s lightweight and molded of high impact, virtually indestructible styrene. Can be deployed or retrieved in seconds. Unaffected by saltwater and cannot affect the sides of your boat. Units are made to “nest” within each other, so storage is a breeze.A Number of Rocker Stopper Units Needed on Each Side of the Boat (Sail or Power): Up to 26 feet (0-8 m) – 3 27 to 36 feet (8-11 m) – 4 37 to 42 feet (11-13 m) – 5 43 to 50 feet (13-15 m) – 8 Quick Guide (pdf)

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - NavyThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Navy can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - GraphiteThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Graphite can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - TealThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Teal can cooler Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Vinyl Coat™ - Sea Ray Mystic White - 12ozMarine Vinyl Coat is a line of flexible aerosol coatings to match, restore or change the color of most marine vinyl and plastic surfaces. Features: Covers stains, fading and prepped mildew Superior adhesion Outstanding UV protection  Stays flexible, will not crack Excellent hiding  Quick drying Applications: Vinyl Plastic marine surfaces Quick Guide (pdf)Brochure (pdf)

Read more less

Pump Protector - 4ozEver get your pressure washer out in the spring, fire it up, and you see water leaking from the bottom of the pump with no water pressure? This is due to seals going bad because of no lubrication, or in cold climates, water in the pump during the winter freezes and causes the cast pump to crack. STA-BIL Pressure Washer Pump Protector is quick and easy to use year-round to keep everything working properly inside your pressure washer. This product is great for protecting pressure washer pumps during storage as well as keeping pistons and seals fresh during the season for easy trouble-free startups. It is simple to use and takes seconds to protect your investment. The next-generation anti-freeze and lubricant will protect your pressure washer pumps 24/7. Screw the pump protector onto the water hose inlet of the pressure washer, with the pressure washer wand disconnected. Push down on the STA-BIL Pressure Washer Pump Protector trigger and hold until you see foam come out the side the wand connects onto. Your pressure washer is now lubricated and any standing water has been pushed out.Features: Protects Pressure Washer Pumps During Storage Protects Pistons and Seals From Damage Can Safely Be Drained Next Generation Anti-Freeze and Lubricant Formula Coats and Protects Components Of Pressure Washer To Prevent Freezing Helps Prevent Harmful Buildup Of Hard Water Mineral Deposits

Read more less

Transom Door Latch Handle - Catch Plate IncludedIdeal for one handed operation of Transom Doors. 316 SS Hand Buffed and Electro-Polished. Includes Handle and Catch Plate.Specifications:  Weight 2.8 lbs (1.27kg) Length 9-5/8" (244mm) Height 2-3/4" (70mm)   Base Plate 4-1/2" (114mm) x 3-1/2" (89mm) Uses (4) 1/4" Flat Head Fasteners

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - SeagrassThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Seagrass can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

0-Degree Rod Holder Rack for Water Mat *Mat Not IncludedAre you tired of the water mat taking up valuable space on board your boat? We have a cost-effective solution to help you store your water mat away and keep your decks free and open.  This product is universal and will work on any boat that has two rod holders that are five feet or less apart.*The Rack is NOT intended to be used when the boat is in tow on the road.Features: Securely transport one water mat per rack system The Poseidon Rack system comes as a set of two and includes two 15-foot straps for securing your water mat to your rack A rotating design that will work on any orientation of your rod holders Made of marine-grade starboard with 316 stainless steel fasteners and screws Manufactured in the U.S.A. The Rack is bent to conform to your water mat to make securing your mat to the rack a breeze Specifications:Dimensions: The rack is 14 x 12 x 4 inchesWhich Option Should You Choose? The 30-degree option is our most common flush mount on the gunwale of your boat The 0-degree option is common for rod holders that are on the transom. When placing your fishing rod into the rod holder, it should be completely vertical. The 15-degree option is commonly found on the back of a leaning post

Read more less

30-Degree Rod Holder Rack for Water Mat *Mat Not IncludedAre you tired of the water mat taking up valuable space on board your boat? We have a cost-effective solution to help you store your water mat away and keep your decks free and open. This product is universal and will work on any boat that has two rod holders that are five feet or less apart.*The Rack is NOT intended to be used when the boat is in tow on the road.Features: Securely transport one water mat per rack system The Poseidon Rack system comes as a set of two and includes two 15-foot straps for securing your water mat to your rack A rotating design that will work on any orientation of your rod holders Made of marine-grade starboard with 316 stainless steel fasteners and screws Manufactured in the U.S.A. The Rack is bent to conform to your water mat to make securing your mat to the rack a breeze Specifications:Dimensions: The rack is 14 x 12 x 4 inchesWhich Option Should You Choose? The 30-degree option is our most common flush mount on the gunwale of your boat The 0-degree option is common for rod holders that are on the transom. When placing your fishing rod into the rod holder, it should be completely vertical. The 15-degree option is commonly found on the back of a leaning post

Read more less

15-Degree Rod Holder Rack for Water Mat *Mat Not IncludedAre you tired of the water mat taking up valuable space on board your boat? We have a cost-effective solution to help you store your water mat away and keep your decks free and open.  This product is universal and will work on any boat that has two rod holders that are five feet or less apart.*The Rack is NOT intended to be used when the boat is in tow on the road.Features: Securely transport one water mat per rack system The Poseidon Rack system comes as a set of two and includes two 15-foot straps for securing your water mat to your rack A rotating design that will work on any orientation of your rod holders Made of marine-grade starboard with 316 stainless steel fasteners and screws Manufactured in the U.S.A. The Rack is bent to conform to your water mat to make securing your mat to the rack a breeze Specifications:Dimensions: The rack is 14 x 12 x 4 inchesWhich Option Should You Choose? The 30-degree option is our most common flush mount on the gunwale of your boat The 0-degree option is common for rod holders that are on the transom. When placing your fishing rod into the rod holder, it should be completely vertical. The 15-degree option is commonly found on the back of a leaning post

Read more less

RibPort Base with 3M Backing - GreyTired of being limited to rigging and outfitting your inflatable boats, stand-up paddle boards, and coolers the traditional way? Introducing the revolutionary RAILBLAZA RibPort Base with 3M Backing! This innovative product allows you to enhance your water adventures by adding StarPort attachments such as rod holders, drink holders, navigational lighting, and even a camera mount – all without having to cut any holes into the craft itself. Installation is simple! The 4.5×6” base is easily applied with the included 3M adhesive backing to any flat surface, so you can instantly attach any RAILBLAZA accessory. Plus, it’s available in your choice of three colors: black, white, or grey.  With the RAILBLAZA RibPort Base with 3M Backing, you’ll never be limited by your gear ever again. Unlock endless possibilities and create a whole new level of fun on the water today!Say goodbye to limited water adventures and HELLO to limitless possibilities with the RAILBLAZA RibPort Base with 3M Backing! Instantly customize your inflatable boats, stand-up paddle boards, and coolers with the no-hassle installation of StarPort attachments. Get yours in black, white, or grey - it's time to get creative!RibPort Base with 3M Backing Overview:TIRED OF BEING LIMITED? - The RAILBLAZA RibPort Base with 3M Backing is a revolutionary new product that allows you to add StarPort attachments to your inflatable boats, stand-up paddle boards, and coolers without having to cut any holes in the craft itself.SIMPLE INSTALLATION - The 4.5x6” base is easily applied with the included 3M adhesive backing to any flat surface, so you can instantly attach any RAILBLAZA accessory. Plus, it’s available in your choice of three colors: black, white, or gray.UNLOCK ENDLESS POSSIBILITIES - With the RAILBLAZA RibPort Base with 3M Backing, you’ll never be limited by your gear ever again. Add rod holders, drink holders, navigational lighting, and even a camera mount to your adventures - all without having to cut any holes into the craft itself.Features: Add accessories to your inflatable boat, SUP, or cooler without tools Installation is simple with the included 3M adhesive backing Available in black, white, or grey Unlock endless possibilities for your next water adventure Specifications: Weight: 0.42 lbs Material Composition: UV stabilized AES plastic Non-leeching UV stabilized PVC plastic Stainless Steel Fasteners 3M VHB Pad Parts Included: 1 x RibPort 1 x 3M Backing Available in 3 colors  03-4064-11 - RIBPort Black 03-4064-21 - RIBPort White 03-4064-51 - RIBPort Grey

Read more less

PowerGuard PRO Battery BoxExperience the difference between PowerGuard PRO Series Battery Protection Upward-facing vents let gases out while reducing water in-take by 94% - vs. PowerGuard 27 Series Polypropylene composite material is impervious to acid leaks and other external factors Engineered spill channels direct water away from the battery With PowerGuard PRO, the battery is always within reach Folding entry panels provide easy access to the battery terminals without the need to remove the mounting strap A versatile bidirectional design allows contact from any angle Ergonomic handles provide more comfort when transporting the battery PowerGuard PRO takes security seriously Reinforced mounting hardware ensures the battery and box stay anchored Spacer blocks are removable to fit Group 24, 27, and 31 batteries The snap-locking lid gives confidence that the battery will remain secure Specifications: Dimensions with Lid Installed - Internal Dimensions (L x W x H): 13-1/8" x 7" x 11" Outside Dimensions (L x W x H): 21" x 11-1/4" x 11-1/2" Color/Style: Black/Vented Quick Guide (pdf)

Read more less

CFX5 95DZ Ice-Free 95L Electric Cooler - BlackThis is the Big One. Dual zone cooling and a capacity that lets you get nomadic for a while – or go all out with campsite dinners. Vacuum Insulated Panels deliver outstanding insulation, and two cooling compartments keep everything at the right temp – ice cream won’t melt, cheese won’t freeze. You can control it with our smartphone app, a carbon steel frame protects, and – cheers – a bottle opener’s built in.Features: The 96L DZ capacity holds up to 133 x 12 oz cans – a large size for big groups and extended nomadic travel Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery, or allows deep draw on dual batteries. Two cooling zones allow you to bring refrigerated and frozen foods all at once. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Dual Advanced Materials and Design in a 95L DZ Dual-Zone Electric Cooler Refrigeration technology - Compressor Technical Specifications: Product Dimensions - 20.87" (D) x 18.58" (H) x 37.87" (W) Product Weight - 63.50lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 1.15A at 100V, 0.48A at 240V Rated Input Current (DC) - 4.5A at 24V, 9.8A at 12V Rated Input Power - 65W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 20"H x 23"W x 39"L WT: 75.4 lbs UPC: 034223507589 Owner's Manual (pdf)

Read more less

Size 44 Low Profile Hatch Seal KitReplacement seals for the Low Profile hatch range. Works by holding the Acrylic pane into the frame.In the Box: Gasket Instruction manual *Sold as an Individual 

Read more less

12" x 18" Wahoo FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011934185

Read more less

Stainless Steel Baby Snap 3/4" - 2-PackFeatures: Expertly crafted, stainless steel Designed to match rigorous quality standards 2 per pack, 3/4"

Read more less

Teak Flag Pole 1-1/4" x 36"Boaters appreciate teak's traditional beauty because of its intricate grainpatterns and color variations. The high oil content of the wood keeps itfrom deteriorating or warping in the harsh marine environment of sun, wind,and water. Teak's natural oils and Silica (sand) make it impervious toinsects and wood rot. To maintain the lasting beauty of teak, it should becleaned using a good teak cleaner and oiled periodically with a quality teakoil.Features: Made from the finest grade A, kiln-dried teakwood No deteriorating or warping Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 36"L WT: 0.8 lbs UPC: 040011953636

Read more less

12" x 18" Swordfish FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011934482

Read more less

12" x 18" Blue Marlin FlagFisherman's Catch FlagsAll Flags Measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011932983

Read more less

Fixed Filet Knife Set - 4 Knives - 5”, 6”, 7” & 8” Fixed KnivesThe Toadfish Fixed Fillet Knife Set brings together all four of our high-performance blades—5”, 6”, 7”, and 8”—in one premium collection. Each knife is crafted with a corrosion-resistant coated blade and an ergonomic, non-slip handle designed for all-day comfort and control. Whether you're breaking down small inshore species or tackling big offshore fillets, this set gives you the ideal tool for every job.Housed in a durable, water-resistant zip-up carrying case, this collection is built for life on the water. The custom-molded interior keeps each knife secure and protected, while the compact design makes it easy to take from boat to cleaning station and beyond.Whether users are on the dock, in the kitchen, or out in the wild, the Toadfish Fixed Fillet Knife Set should be the go-to for clean cuts, easy handling, and dependable performance.Toadfish Model Number: TFFILETSET (GIFT SET)Features: Non-slip ergonomic handle 8CR14 High Carbon Stainless Steel with Titanium Coating Non-Slip Raised Rib Rubber Grip Tapered standard flex designs Custom zip-up carrying case – Durable, organized, and ready to travel Products Included: 5” Flex Fillet Knife – For precise cuts and delicate work 6” Fillet Knife – All-around utility for most species 7” Fillet Knife – Ideal for medium to large fish 8” Breaking Knife – Heavy-duty power for big cuts Custom zip-up carrying case – Durable, organized, and ready to travel

Read more less

Gator Patch 6" x 9" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Gator Patch 3" x 18" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Gator Patch 9" x 12" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Gator Patch 3" x 6" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Trolling Motor Support XLKeep your electric trolling motor safe and secure with the Trolling Motor Support XL from RAILBLAZA! This clever accessory ensures peace of mind out on the water and while traveling. Its easily adjustable height lets you find the perfect fit for your electric trolling motor shaft, and its flexible strap will hold it in place during transit so you can avoid any unnecessary damage or vibration. Thanks to the handy offset feature, this support can be positioned inboard or outboard to match the alignment of your motor perfectly. And when you’re ready to get down to serious fishing, the support can be removed to create an unobstructed deck space. The best part is that it can be mounted to any RAILBLAZA StarPort mount so you can install it on any application – now that’s convenient!Keep your electric trolling motor in tip-top shape with the Trolling Motor Support XL from RAILBLAZA! Easily adjustable and removable, this clever accessory ensures peace of mind out on the water and while traveling. Plus, its flexible strap and offset feature make it perfect for any application – now that's convenient!Trolling Motor Support XL Overview:KEEP YOUR ELECTRIC TROLLING MOTOR SAFE - The RAILBLAZA Trolling Motor Support XL is the perfect way to keep your electric trolling motor safe and secure while you're out on the water. Its easily adjustable height lets you find the perfect fit for your electric trolling motor shaft, and its flexible strap will hold it in place during transit so you can avoid any unnecessary damage or vibration.HANDY OFFSET FEATURE - The support can be positioned inboard or outboard to match the alignment of your motor perfectly, and when you're ready to get down to serious fishing, the support can be removed to create an unobstructed deck space.CHOOSE YOUR MOUNT- The support can be mounted to any RAILBLAZA StarPort base mount so you can install it on any application – now that's convenient!Features: Can be offset inboard or outboard to suit the alignment of your Trolling motor shaft. Height is adjustable to suit different shaft heights. The flexible strap holds the shaft captive to avoid vibration on the road or water. Can be removed to create a clear deck when the trolling motor is in use Specifications: Weight: 0.70 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included:1 x Trolling Motor Support XL assembly

Read more less

Pontoon Boat RailMount StarPort 28-32Get ready to take your Pontoon boat experience to the next level with the amazing Pontoon RailMount StarPort 28-32! This base mount allows you easy and secure attachment of any RAILBLAZA accessories for all your needs. You won’t have to worry about drilling holes; simply screw it together and it’s off to wherever you need to go. With its rubber grips and stainless-steel mounting screws, it fits perfectly on the 1 1/8″ or 1 ¼” square rails commonly found on Sun Tracker boats. The Pontoon RailMount is great for those who want to change the location of their Rod Holder II, Fillet Table, Drink Holder, StowPod, or many other RAILBLAZA accessories. Don’t wait – make your party barge dreams come true with the versatile Pontoon RailMount StarPort 28-32 today!Make more room on your pontoon boat with the RAILBLAZA Pontoon RailMount 28-32! This revolutionary base mounts securely and easily attachs any StarPort RAILBLAZA accessories to your rails. It even comes with all installation hardware, so there's no drilling required - just attach, move, and go! Can make adding and removing a bimini top a snap.Pontoon Boat RailMount StarPort 28-32 Overview:SECURE ATTACHMENT - The RAILBLAZA Pontoon RailMount 28-32mm is the perfect way to attach any RAILBLAZA accessory to your party barge railing. This marine rail mount has a simple screw-together design, meaning it can be easily moved from spot to spot with no drilling required!FIT FOR 28MM OR 32MM RAILS - This rail mount can fit both 28mm (1-1/8”) and 32mm (1-1/4”) square rails, making it compatible with a variety of Pontoon boats. All installation hardware is provided, including rubber grips and stainless steel screws.EASY INSTALLATION - No drilling required! Simply screw the Pontoon RailMount together and you're ready to go!Features: Rubber inserts avoid slippage when attached to rails StarPort locking slide secures accessories in place UV stabilized plastic The unique design avoids interference with the rail wall Specifications: Weight: 0.33 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x Pontoon Boat Railmount 1 x StarPort2 x non-slip rubber inserts 2 x M6 x 30mm screws & moly bond coated nuts 2 x M6 x 16mm screws & moly bond coated nuts Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 3"W x 5"L WT: 0.35 lbs UPC: 814162021076

Read more less

Quick Flush Kit for OMC OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010602

Read more less

CFX5 25 Ice-Free 25L Electric Cooler - BlackThe most compact and portable CFX5 25L ice-free electric cooler holds 40 cans and can be conveniently stored in the back of your SUV or fit in the back seat – great for day trips, duos, or solo adventures. Highly efficient Vacuum Insulated Panels deliver outstanding insulation, the lid seals tightly, and the compressor takes you down to -7°F. Control it with our smartphone app and stay adventure-ready.Features: The 25L capacity holds up to 40 x 12 oz cans – a compact size for up to three people’s weekend adventures and long solo trips. Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery or allows deep draw on dual batteries. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Single Advanced Materials and Design in an Ice-Free 25L Electric Cooler Refrigeration technology - Compressor Warranty - 5 Year Limited Technical Specifications: Product Dimensions - 22.4" (D) x 16.54" (H) x 13.46" (W) Product Weight - 29.77lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 0.85A at 100V, 0.36A at 240V Rated Input Current (DC) - 3.2A at 24V, 7.2A at 12V Rated Input Power - 45W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 15"H x 19"W x 24"L WT: 34.4 lbs Owner's Manual (pdf)

Read more less

CFX5 45 Ice-Free 45L Electric Cooler - BlackThe versatile CFX5 45L has a minimal footprint, holds 67 cans, and is your ice-free electric cooler for camping trips, portable fridge for the van or boat. Efficient Vacuum Insulated Panels deliver outstanding insulation, the lid’s gasket seals tightly, and the compressor takes it down to -7°F. You can control it with our app, the rugged build is road-ready, and – cheers – a bottle opener’s built in.Features: The 45L capacity holds up to 67 x 12 oz cans – a versatile size for up to five people’s weekend adventures, family camping trips, and extended nomadic travel. Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery or allows deep draw on dual batteries. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Single Advanced Materials and Design in an Ice-Free 45L Electric Cooler Refrigeration technology - Compressor Warranty - 5 Year Limited Technical Specifications: Product Dimensions - 27.32" (D) x 18.74" (H) x 15.67" (W) Product Weight - 40.35lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 0.94A at 100V, 0.39A at 240V Rated Input Current (DC) - 3.7A at 24V, 8.1A at 12V Rated Input Power - 49W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 17"H x 21"W x 29"L WT: 46.65 lbs UPC: 034223507558 Owner's Manual (pdf)

Read more less

CFX5 35 Ice-Free 35L Electric Cooler - BlackThe CFX5 35L is a super-versatile size – holds up to 50 cans and is easy to carry – make it your ice-free electric cooler for camping trips and family outings. The highly efficient Vacuum Insulated Panels deliver outstanding insulation, the lid’s gasket seals tightly, and the compressor takes you down to -7°F. Control it with our smartphone app and stay adventure-ready.Features: The 35L capacity holds up to 50 x 12 oz cans – a versatile size for up to four people’s weekend adventures and long solo trips. Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery or allows deep draw on dual batteries. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Single Advanced Materials and Design in an Ice-Free 35L Electric Cooler Refrigeration technology - Compressor Warranty - 5 Year Limited Technical Specifications: Product Dimensions - 27.32" (D) x 16.02" (H) x 15.67" (W) Product Weight - 36.60lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 0.90A at 100V, 0.38A at 240V Rated Input Current (DC) - 3.4A at 24V, 7.6A at 12V Rated Input Power - 47W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 17"H x 18"W x 28"L WT: 42.5 lbs UPC: 034223507541 Owner's Manual (pdf)

Read more less

CFX5 55IM Ice-Free 55L Electric Cooler - BlackAn electric cooler that doesn’t require ice – but it makes it. Nice. Holds up to 84 cans, so it’s a go-to for long weekends with friends or as a travel fridge. Vacuum Insulated Panels deliver outstanding insulation, the lid’s gasket seals tightly, and the compressor takes it down to -7°F. Control it with our smartphone app, power it with our optional Obsidian solar panels, and a bottle opener’s built in.Features: The 55L capacity holds up to 84 x 12 oz cans – a large size for up to six people’s weekend adventures, family camping trips, and extended nomadic travel Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery, or allows deep draw on dual batteries. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Single Advanced Materials and Design in an Ice-Free 55L Electric Cooler Refrigeration technology - Compressor Technical Specifications: Product Dimensions - 17.91" (D) x 18.90" (H) x 28.35" (W) Product Weight - 44.54lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 0.96A at 100V, 0.40A at 240V Rated Input Current (DC) - 4.0A at 24V, 8.5A at 12V Rated Input Power - 55W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 20"H x 20"W x 30"L WT: 54.35 lbs UPC: 034223507565 Owner's Manual (pdf)

Read more less

Low Profile Group 24 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Patented design Install with #10 fasteners Specifications: Battery Series: 24/24M Inside Dimensions: 10-5/8" x 7-1/4" x 8-1/2" Quick Guide (pdf)

Read more less

Safety Bailer KitWaterproof emergency flashlight, Bailer with easy-grip handle, 50' (15.2 m) marine rope with float, Pea-less flat safety whistle with lanyard, Seamless "O" Ring.Features: For use where a bailing device is required Integrated handle is easy to grip Includes a water tight lid and functions as a dry storage container *Note: Two (2) AA batteries required, but not included, for the 5-piece Bailer Safety Kit (11830-2).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

16" x 24" Deluxe Sewn 50 Star FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011954244

Read more less

Pontoon 30" Flag Pole Mount & 16" x 24" US FlagDeveloped with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips. The 30" comes complete with a 16" x 24" sewn U.S. Flag. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 8"W x 33"L WT: 0.8 lbs UPC: 040011264893

Read more less

1/2" D-Sponge Gasket 7'7' of D-Sponge gasket for hatch repairModel years 1990 to present

Read more less

Teak Flag Pole - 1" x 24"Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.Features: Made from the finest grade A, kiln-dried teakwood No deteriorating or warping Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 24"L WT: 0.6 lbs UPC: 040011953612

Read more less

Skipper Flag Clips w/SS Screw Eyes (4pk)Stainless Steel Skipper Clips provide an easy way of attaching flags, canopies, curtains, etc. The extended length of these versatile clips reaches grommets 3/4" from fabric edges. Package includes (4) Skipper Clips and self-tapping screw eyes for attachment to wood, metal of fiberglass. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 2"W x 5"L WT: 0.2 lbs UPC: 040011579331

Read more less

Teak Flag Pole - 3/4" x 18"Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.Features: Made from the finest grade A, kiln-dried teakwood No deteriorating or warping Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 18"L WT: 0.2 lbs UPC: 040011953605

Read more less

12" x 18" Jolly Roger Novelty FlagNovelty Design FlagsAll novelty flags measure 12" x 18" with 2-sided screen printed graphics and brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011931887

Read more less

Universal Flush Mount Frame for NRX115 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic NRX 115 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 26"W x 33"L WT: 8.8 lbs UPC: 808282390044

Read more less

Group 27 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features: The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle Molded base mounts with four #10 Panhead fasteners Specifications:Inside Dimensions: 12-3/8" L x 7-1/8" W Quick Guide (pdf)

Read more less

Heavy Duty Group 27 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Install with #10 fasteners Specifications: Inside Dimensions: 12" L x 6-7/8" W Battery Series: 27/27M Quick Guide (pdf)

Read more less

Size 8 Opening PortlightLewmar Stainless portlights feature polished stainless 316 outer frames. Inside the boat, they are finished with a chrome plastic trim. The handles and hinges leave the lens clear of obstructions, giving it an uncluttered view and a clean modern look. Portlight handles apply the correct pressure evenly onto the seal in the closed position. Portlight handles are unable to vibrate open when in the closed position.Features: Flyscreens are supplied as standard The acrylic lens is tinted grey Technical Specifications: Frame Material - Stainless Steel Dimensions (W x L x H) - 7-11/16" x 17-13/16" x 1.5" Weight - 4.18lb In the Box: Portlight Mounting hardware Instruction manual *Sold as an Individual Owner's Manual (pdf)

Read more less

12" x 18" Deluxe Sewn 50 Star FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011954183

Read more less

Weather SealLength: 10'Height: 1/2"Width: 1/2"Color: BlackTACO Metals supplies quality weather seal that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for live-wells, exterior doors, instrument covers and electronic boxes. TACO weather seal products are made of specially formulated rubber compounds, designed and engineered to provide maximum sealing capacity and protect against weathering and vibration. Absorbs shock and reduces vibration Offers superior resistance to water absorption, sunlight and extreme temperatures Durable EDPM synthetic rubber compound Ideal for live-wells, exterior doors, instrument covers and electronic boxes Adhesive backing for convenient installation This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Read more less