Portable Bilge PumpSelf-priming, centrifugal pump.  Ideal for jon boats, utility boats, dinghies, inflatable boats, and all other small watercraft.  Also great for removing fluids from non-marine applications.Features: Powered by 3 D-cell batteries (not included) A wide strainer base adds stability Suction cup or screw mount - Includes clip to attach a hose to the transom Submersible and runs dry without damage Technical Specifications: Flow Rate - 4.17 GPM (15.79 LPM) Dimensions - 5” x 5” x 12” Hose - 3/4" x 36" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2000 Bilge Pump - 12 VDC, 2000 GPHHeavy duty and built to last. SHURFLOs 2000 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.Features: 3' Tinned Wire Assembly Anti-Airlock Tough Nylon Housing Ignition Protected Water Cooled Motors - Extended Life 3 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 6"H x 7"W x 9"L WT: 5.5 lbs UPC: 752324010127

Read more less

Proline Bilge Pump1000 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):60 L/M - 952 GPH Capacity Straight (13.6V): 73 L/M - 1150 GPHAmperage:3AFuze Size:5AConnection:3/4"Dimensions: 5"L x 3"W x 4"H Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 7"L WT: 0.9 lbs UPC: 729321221023

Read more less

Inline Booster High Flow Electric Galley Pump - 12VThis high-performance whale pump fits inline to increase the flow rate.Features: The narrow design is ideal for dropping into the water tank  Compact, quiet, lightweight design for use with pressure switch and microswitch systems An inexpensive way to upgrade a manual water system  Also suitable for pumping diesel  Low power consumption  Specifications: Pump Type: Inline Weight: 015 kg (0.3 lbs.) Voltage: 12 VDC Recommended Fuse Size: 5 amps Cable Length: 1m (3 ft.) Hose Connection: Suitable for 10 mm (38 in.) or 13 mm (1/2 in.) flexible hose use WX1511B (stern adapter 11-15 mm) and connect WX1504 (15 mm (5/8 in.) equal straight Filter Included: No  Length: 129 mm (5-1/16 in.) Width: 36 mm (1-7/16 in.) Materials: Pump Body: ABS Seal: Nitrile Strainer: Polyurethane  Impeller: PBT Cable: PVC Performance: Discharge Head: Flow rate per minute/current draw @ 12VDC 0 m (0 ft.): 15.8 liters (4 US gallons) 3.8 amps 1 m (3 ft.): 14.8 liters (4 US gallons) 3.7 amps 3 m (10 ft.): 12.8 liters (3.5 US gallons) 3.5 amps  1 Year Warranty: CE certified ISO 88846 ISO 10133 ABYC H-23 IP67

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24" Diameter: 1-3/4" Strokes/Gal: 6 Capacity: 10GM Hose Length: 24" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 GPM Type: Manual Box Dimensions: 2"H x 4"W x 27"L WT: 1 lbs UPC: 021083000077

Read more less

360GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 360GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 360 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104700 Brochure (pdf)

Read more less

Spare Motor for Cartridge - 12voltUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 729321285520

Read more less

1000 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 50 l/min - 800 GPH Capacity straight (13.6V/27.2V): 63 l/min - 1000 GPH Amperage: 3.2 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 7"W x 8"L WT: 1.1 lbs UPC: 729321079037 Owner's Manual (pdf)

Read more less

IL200 Plus In-Line Submersible Pump - 24V - 2.8GPMCentrifugal submersible and inline pump.Features:  Cable Length: 1(m) Connections: 1/2" (12.7mm) Hose Dimensions: 142mm long, 38mm diameter Maximum Current: 1.5(amps) Output: up to 12.7 litres/minute at up to .75bar (2.8 gallons/minute at 11psi) Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Bait tank aeration, diesel transfer, water transfer. Water Systems to 80 ºC Intermittent light duty Motor life approx 250 hours Actual Weight: 0.33 Kg  (Approx. 0.53 Kg packed) Specifications: Type: Electric Gallons Per Minute: 2.8 GPM Volts: 24v Box Dimensions: 3"H x 9"W x 13"L WT: 1 lbs UPC: 042237109873

Read more less

Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market. Specifications: Volts: 24v Type: Electric Outlet Size: 3/4" or 1" Operation: Automatic Gallons Per Hour: 800 GPH Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs UPC: 022697023476 Owner's Manual (pdf)Brochure (pdf)

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Round Rule Pumps w/Flow Rate 1500-2000gphWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 3"H x 6"W x 7"L WT: 0.15 lbs UPC: 042237085634

Read more less

Rule-A-Matic® Float SwitchYear after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12, 24, 36v Type: Switches Box Dimensions: 3"H x 5"W x 9"L WT: 0.4 lbs UPC: 042237095435 Owner's Manual (pdf)

Read more less

LoPro 900GPH Bilge Pump - AutomaticThe Rule LoPro™ 900 Automatic is a fully automatic low profile Bilge Pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4".It features a threaded discharge nozzle to which you can attach either a straight or a 90° fitting (included). In addition, you may use the tricuspid check valve (included) on the straight fitting to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose attached can also swivel 360° to route the hose perfectly. The pump features a sensing switch to control the pump. Unique to this pump are two settings, a high setting where the pump turns on when the water reaches 1-3/4" and a low setting where the pump turns on when the water reaches 1".Features: 900 GPH Low Profile Bilge Pump Fits into hard to reach places Fully Autuomatic- two settings available, high and low Threaded discharge ports with mulitiple fittings available Features a tricuspid check valve to minimize back flow of water 3 Year WarrantyWARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Automatic Gallons Per Minute: 15 GPM Gallons Per Hour: 900 GPH Type: Electric Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 042237114372 Brochure (pdf)

Read more less

Electronic Float Switch 12vCompact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch. False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability. Activates pump at 2" water level, deactivates pump at 3/4" water level. 12V. Handles up to 15 amps. Specifications: Volts: 12v Type: Switches Box Dimensions: 4"H x 6"W x 8"L WT: 0.5 lbs UPC: 7330717001131 Owner's Manual (pdf)

Read more less

Amazon Bulkhead Manual Bilge PumpFeatures: Connections: – for 25mm (1”) bore hose Dimensions: – 250mm long, 170mm wide, 120mm high, with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 45 litres/minute (10 gallons/minute) For surface mounting on bulkhead or deck. Light compact pump. Ports and bodies can be positioned in 96 different ways for maximum flexibility of installation. Stainless steel handle with bulkhead clips. Self-priming up to 4m. Packaged Dimensions: L:23.00 x H:16.00 x W:21.00cm Actual Weight: 0.96 Kg  (Approx. 1.26 Kg packed)

Read more less

7700D GPH Evacuator High Volume Utility Pump - 12VThe Rule Evacuator high-volume utility pump is ideal for fast evacuation of water from a vessel. A favorite of tow boat operators, the Evacuator is comprised of two 4,000-gallon per hour (GPH) or 15,141 liters per hour (LPH) pumps in tandem, with a net volume at open discharge of 7,700 GPH or 29,148 LPH.  The Evacuator pump is a useful utility pump for non-marine applications as well, including dewatering flooded basements, swimming pools, or excavations.A great alternative to gas-powered pumps, the Evacuator simply connects to a 12V battery. A 3-inch discharge hose is required in this application. Features: High capacity, 12V utility pump Discharges up to 7,700 GPH (29,148 LPH) Built-in backup allows each pump to operate independently, if necessary 3-inch barbed discharge port Long power leads at 7 feet (2 meters) Specifications: Gallons Per Hour: 7700 GPH Operation: Non-Automatic Outlet Size: 3" Type: Electric Volts: 12v Box Dimensions: 12"H x 12"W x 15"L WT: 13.65 lbs Owner's Manual (pdf)

Read more less

Cartridge ComboCombines the line of cartdrige bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.Specs: Capacity 3' head (13.6V): 50l/min - 800 GPH Capacity Straight (13.6V): 63l/min - 1000GPH Amperage: 3.2A Fuse Size: 5A Connection: 3/4" Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 5"H x 7"W x 8"L WT: 1.15 lbs UPC: 7330717013059

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36" Diameter: 1-3/4" Strokes/Gal: 4 Capacity: 13GPM Hose Length: 36" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 780 GPH Gallons Per Minute: 13 GPM Type: Manual Box Dimensions: 3"H x 4"W x 38"L WT: 1.4 lbs UPC: 021083000121

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36" Diameter: 1-3/4" Strokes/Gal: 4 Capacity: 13GPM Hose Length: 72" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 780 GPH Gallons Per Minute: 13 GPM Type: Manual Box Dimensions: 2"H x 6"W x 37"L WT: 2 lbs UPC: 021083000145

Read more less

Hand Bilge Pump 24" x 36"These Manual Bilge Pumps are designed for use in small boats without electrical power or for larger boats in emergencies where power is no longer available. Compact, lightweight, and easy to stow. Foot valve is removable for easy cleaning. Capacities from 6-13 GPM. Pumps feature removable hoses and storage clips. To prevent leaks, hose must be screwed in, NOT pushed in. Constructed of durable UV resistant injection molded nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 3"H x 5"W x 28"L WT: 1.8 lbs UPC: 035514503020

Read more less

Digital High Water Alarm - 12VThe 12V digital bilge sensor detects when there is water in the bilge or a tank. Field sensing digital technology, fully sealed without any moving parts.Will not corrode and are not affected by oil or debris.12V display panel, 1 LED and piezo alarm integrated, including 152mm (6″) wire leads, fuse and fuse holder.Features:Electronic SensorSpecifications:Weight: 0.05 kg/1 lb*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Alarms Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.5 lbs UPC: 7340176600400

Read more less

Smartbail - Compact Manual Bilge PumpWhale’s low-profile compact range is designed for confined spaces where you have limited space to fit your pump. A sleek integrated handle makes the pump instantly ready for use.Features: Thru-bulkhead (ideal for low-profile installation through a bulkhead) Fast installation (easy to install by one person from one side of the bulkhead) A compact size is ideal where space is limited Modern styling (sleek cover blends in with the deck fiberglass) No additional fittings are needed, allowing quick installation Comfortable operation (an easy-grip integrated handle) Easy pump action patented diaphragm Self-sealing design means no need for messy sealants It is important to ensure that a vented anti-siphon loop is incorporated into the system Quick Guide (pdf)Owner's Manual (pdf)

Read more less

400 GPH 12V Bilge Pump - Barbed PortA small, price-wise alternative in the submersible bilge family. The low-cost choice for boat owners who do not want to forsake quality.Features: Capacity straight (13.6V/27V): 30 I/min. - 475 GPH Voltage: 12 V DC Amperage: 2.5A Fuse Size: 3 A Connection: 3/4" Max height: 100mm - 4" Weight 0.35kg - 12oz CE-Approved Barbed Port Specifications: Type: Electric Box Dimensions: 4"H x 4"W x 5"L WT: 0.7 lbs UPC: 729321214056

Read more less

Heavy Duty Bilge Pump 1600 series 12v:The best choice when you are looking for high performance, heavy duty pumpsdesigned to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.CE-ApprovedFeatures: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH Amperage: 7 A Fuse Size: 10 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 149 mm - 5.86" Weight 1.3 kg - 2.75 lbs Specifications: Gallons Per Hour: 1600 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 6"W x 6"L WT: 3.4 lbs UPC: 729321160049

Read more less

Amazon Universal Manual Bilge PumpFeatures: Connections: – for 38 mm (1½ “) bore hose Dimensions: – 240mm long, 210mm wide, 150mm high, with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 100 litres/minute (22 gallons/minute) Flow direction reversible by exchanging inlet and outlet ports Quick-release clamp ring for rapid disassembly Optional through-deck kit permits operation from inside or outside the cabin Push-fit inlet and outlet elbows (1 supplied with pump) increase flexibility of installation Stainless steel handle with bulkhead clips Self-priming up to 4m Packaged Dimensions: L:24.00 x H:16.00 x W:24.00cm Actual Weight: 1.36 Kg  (Approx. 1.86 Kg packed)

Read more less

Heavy Duty Bilge Pump 4000 GPH - 24VFeatures: Limited 1 Year Warranty  Capacities of 1600, 2200, or 4000 GPH Liquid-cooled, 12-pole motor with double ball bearings for extended service life The shaft of stainless steel (SS2343) The impeller is carefully designed and tested to maximize head and flow 4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, and unique threaded port design Universal base plate and choice of two different ports makes for a simple installation Removable check valve included Heavy Duty Submersible Pumps can be combined with either an electronic float switch or the Ultima Switch for automatic operation Specifications: Capacity 1.0M head (13.6V/27.2V): 164 l/min - 2600 GPH Capacity straight (13.6V/27.2V): 252: l/min -4000 GPH 24V 7.5A Fuse Size: 15A Connection 1.5" and 2"

Read more less

MK5 Manual Black Waste Sanitation PumpWhale has led the way in manual diaphragm pumps for the marine world for decades.The Mk 5 sanitation is a reliable fully housed black waste pump - reliability when you need it mostFeatures and Benefits Can be mounted in various orientations/positions Tough plastic housing keeps in nasty smells Large virtually unblockable valves Easy to clean (no tools required) High performance- 56 ltrs (14.8 US gals) per minute Wide hose connections for maximum performance - 38 mm (1+") Lightweight design for easy operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 14.8 GPM Operation: Non-Automatic Outlet Size: 1-1/2" Type: Manual Box Dimensions: 8"H x 9"W x 12"L WT: 3.4 lbs UPC: 766478052704

Read more less

1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 1-1/8" Does not include Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH Amperage: 3 A Fuse size: 5 A Connection: 1-1/8"" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 16 oz. Specifications: Gallons Per Hour: 1250 GPH Operation: Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 7"W x 8"L WT: 1.1 lbs UPC: 729321082037 Owner's Manual (pdf)

Read more less

Supersub 12V 500GPH Low Profile Non-Automatic Bilge PumpThe narrow low profile compact bilge pump rangeSupersub Family- Narrow, low profile bilge pump fits deep down in small/ awkward bilge spaces where other pumps won't fit.Features and Benefits Low narrow design for confined bilge spaces Easy installation - outlet and pump body rotate to suit your installation High performance - Flow up to 1100 US gals per hour Efficient operation - Very low power consumption Easy to clean- snap fit assembly Low profile strainer - Leaves the bilge almost dry WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 766478951014

Read more less

Grey IC Waste Pump 24VUnique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pumpElectrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped outComplete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump.Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Waste Pumps Gallons Per Minute: 4.5 GPM Inlet Size: 3/4" or 1" Operation: Automatic Outlet Size: 3/4" or 1" Suction Lift (ft.): 3' Volts: 24v Operation Method: Automatic Box Dimensions: 6"H x 8"W x 12"L WT: 5.6 lbs UPC: 766478945723 Brochure (pdf)

Read more less

Automatic Submersible Bilge Pump - Electromagnetic Switch01604-00 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 12-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 1600 GPH Operation: Automatic Outlet Size: 1-1/8" or 1-1/4" Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 8"L WT: 4.25 lbs UPC: 729321916431

Read more less

Gusher 10 Manual Bilge Pump Thru Deck/Bulkhead MountWhale's long life diecast alloy range - robust designs for extreme conditions.Install Gusher 10 for the long haul.Features Durable Diecast Alloy Bilge Pump Robust design stands up to the toughest marine conditions Top performance- High flow non-choke valves, 65 ltrs (17 US gals) per minute 3 mounting options available Bulkhead, floor or thru deck mounting Designed for simple installation and maintenance Efficiency - Large non-choke valves Ideal for workboats, cruisers, offshore racing Easy pump action - Self priming Suitable for diesel transfer with Nitrile diaphragm (service kit AK3714 available separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1020 GPH Gallons Per Minute: 17 GPM Type: Manual Box Dimensions: 9"H x 9"W x 13"L WT: 6 lbs UPC: 766478374004

Read more less

EBSN 15 Amp Electric Switch f/Bilge PumpFeatures Operation managed by microcontroller. Advanced digital filter to distinguish the presence of water. Extended power supply range. Remote indication of operation status by led or remote control panel (optional). Manual remote pump switch-on by button or remote control panel (optional). Signal for prolonged bilge pump switch on (if led or remote control panel is installed). Protection against excessive battery rundown. Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. Functioning over a wide range of environmental temperatures. Resin-coated watertight casing. Easy installation. Specifications: Type: Switches Volts: 12/24v Box Dimensions: 3"H x 5"W x 7"L WT: 1.15 lbs UPC: 8057090045123

Read more less

Fish Box Evacuation Pump - 24VDC 5GPM Diaphragm w/1.5" FittingsThe fish box evacuation pump is perfect for emptying a fishbox after a day's fishing. Typically the fish box is not only used for storing the days catch but very often is used for a cooler for supplies. This means that there can be all manner of debris left in the bottom of the fish box at the end of the day. This self-priming pump is designed for passing typical debris, such as bait residue, particles of ice, fish scales, etc. Its dry-running capabilities and the 360° rotatable head allow this pump to be mounted in almost any position in the boat, allowing for total flexibility.Features: Flexible installation No filter required Compact and simple design 24V Dry running capapbility Connections for 38mm (1-1/2") Ports Up to 19 Liters per Minute (5 US Gallons) flow Relevant standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Minute: 5 GPM Volts: 24v Box Dimensions: 6"H x 8"W x 14"L WT: 6.95 lbs UPC: 671880575928

Read more less

EBSN 10 Amp Electric Switch f/Bilge PumpFeatures Operation managed by microcontroller. Advanced digital filter to distinguish the presence of water. Extended power supply range. Remote indication of operation status by led or remote control panel (optional). Manual remote pump switch-on by button or remote control panel (optional). Signal for prolonged bilge pump switch on (if led or remote control panel is installed). Protection against excessive battery rundown. Switch-on/switch-off delay to avoid false switch-on/switch-off cycling of the pump caused by the roll of the boat. Functioning over a wide range of environmental temperatures. Resin-coated watertight casing. Easy installation. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 3"H x 5"W x 7"L WT: 1.15 lbs UPC: 8057090045116

Read more less

Rule 2000Non-Automatic 24VEngineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 24 Volts DC .Voltage:24 (Vdc)Amp Draw: 4 (amp)Fuse Size:7.5 (amp)Height:152 (mm) 6 (inches)Width:108 (mm) 4-1/4 (Inches)Weight:1.3 (kg) 2-15 (lb)WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Gallons Per Minute: 33.3 GPM Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 24v Type: Electric Box Dimensions: 5"H x 5"W x 6"L WT: 3.2 lbs UPC: 042237083340 Owner's Manual (pdf)

Read more less

Automatic Bilge Pump 750 GPH - 12VFully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install.Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode.Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 2,7A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 750 GPH Gallons Per Minute: 12 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 12v Box Dimensions: 4"H x 5"W x 7"L WT: 1.3 lbs UPC: 7340176600158

Read more less

Standard Automatic Float Switch - 12/24 VDCThe SHURFLO series float switches provide the ultimate in reliability for your boat. Features: 3' Tinned Wire Assembly Non-Mercury Remote or Direct Mounting Ignition Protected 3 Year Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 3"H x 7"W x 9"L WT: 0.45 lbs UPC: 752324010615

Read more less

Rule 3700Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Non-Automatic Outlet Size: 1-1/2" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 6 lbs UPC: 042237083357 Owner's Manual (pdf)

Read more less

Ultima Bilge PumpUltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. All version are delivered with a removable check valve.The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.CE-ApprovedFeatures: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH Capacity straight (13.6 V): 79 l/min - 1250 GPH Amperage: 3 A Fuse Size: 5 A Connection: 1-1/8" and 1-1/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:117 mm - 4.6" Weight:0.66 kg - 23.3 oz. Specifications: Gallons Per Hour: 1250 GPH Operation: Automatic Outlet Size: 1-1/8" or 1-1/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs UPC: 729321472616 Owner's Manual (pdf)

Read more less

Grey IC Waste Pump 12VUnique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pumpElectrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped outComplete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump.Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Waste Pumps Gallons Per Minute: 5 GPM Inlet Size: 3/4" or 1" Operation: Automatic Outlet Size: 3/4" or 1" Volts: 12v Operation Method: Automatic Box Dimensions: 6"H x 8"W x 12"L WT: 5.4 lbs UPC: 766478945716

Read more less

Triple Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Triple Pump 12VDC:Three motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications:Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.0 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.75 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L  Weight 2.2 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Handy Boy Utility PumpVersatile polished brass multi-purpose hand pump Drain, fill or top up engine and gearbox oil Overcomes problem of hard to reach drain plugs and filler caps Oil and corrosion resistant brass neoprene construction with up to 1 1/2 GPM output 1001 other uses on any boat WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1.5 GPM Outlet Size: 1/2" Type: Manual Box Dimensions: 2"H x 9"W x 16"L WT: 1.8 lbs UPC: 671880028288 Quick Guide (pdf)

Read more less

Automatic Submersible Bilge Pump - Ultima Switch02274-001 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 16-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 220 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 8"L WT: 6 lbs UPC: 729321916486 Owner's Manual (pdf)

Read more less

Cartridge Bilge Pump 750GPH - 12VSubmersible bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install.Features: Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation  Replaceable cartridge motor  Easy maintenance and low power consumption Specifications: Including 19 mm (3/4″) straight and elbow detachable discharge ports  Amperage: 2,7 A  Fuse Size: 5A  For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Gallons Per Hour: 750 GPH Gallons Per Minute: 12 GPM Type: Electric Volts: 12v Operation: Non-Automatic Outlet Size: 3/4" Box Dimensions: 4"H x 4"W x 5"L WT: 0.85 lbs UPC: 7340176600028

Read more less

Gusher Urchin Manual Bilge Pump On Deck Mount Removable HandleSince the 1940s Whale engineers have refined our manual bilge pump designs and completed extended life testing - the result? Whale's iconic manual bilge pump rangeManufactured by hand using high grade materials and drawing on more than 60 years experience.Features Easy of operation - Smooth easy action Easy maintenance - Clamp ring easily removed for pump head rotation and quick maintenance Versatility of design - Dual size nozzles for 25 mm (1") or 38 mm (1+") hose to suit your plumbing Efficient performance - up to 55 ltrs (14.5 US gals) per minute Three different mounting models (deck, bulkhead and thru deck models) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 870 GPH Gallons Per Minute: 14.5 GPM Type: Manual Box Dimensions: 6"H x 8"W x 13"L WT: 2.15 lbs UPC: 766478902108

Read more less

500 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications: Amp Draw: 1.4 500 GPH Rated Voltage: 12V Fuse Size: 3A Outlet Hose Size: 3/4" I.D. Wire/Connector: 22" wire

Read more less

800 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications: 800 GPH Amp Draw: 2.5 Rated Voltage: 12V Fuse Size: 5A Outlet Hose Size: 3/4" I.D. Wire/Connector: 22" wire

Read more less