Mold & Mildew Stain Remover - 16ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 16 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 3"W x 8"L WT: 1.2 lbs UPC: 860007772771 Quick Guide (pdf)

Read more less

Instant Leak Plug & Sealant - 14ozStay Afloat is an instant-leak plug and sealant. It is a simple and versatile material intended to be used to stop or slow water leaks. Used alone, it requires no mixing, measuring, or curing. It is easily molded and applied by hand into holes, gaps, and cracks. Applied in sufficient quantity, it can stop or slow many types of leaks, and when combined with other material(s), such as wood or plastic, it can stop or slow larger leaks.Stay afloat has been used in many rescue operations, yet it takes common sense to know where, when, and how it can be used. (It is not a miracle product or gimmick.) In most cases, Stay Afloat is a temporary fix, and leaks should be permanently repaired as soon as possible.Features:Additional applications include sealing, lubricating, and water-proofingSpecifications:Size: 14oz Quick Guide (pdf)

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - BlackSikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses:Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.Characteristics & Advantages: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white) UL listed for potable water (black, gray, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Quick Dry Water Blade - 18"Swobbit award winning water blades are made of high quality, medical grade silicone.  Perfect for a drying all types of surface types and surface sizes. No need for messy towels or chamois. Whether marine, auto, RV or aviation, Swobbit water blades make protecting your investment, a simple one. Features: T-Bar edge whisks away water in one pass Dries virtually any surface in 1/3 the time of messy towels, chamois or squeegees  15 times less friction than towels Safe for all finishes including paint, fiberglass, windows and enclosures Can be used with the Quick Dry Uni-Snap adapter (SW21215) to dry hard to reach areas *Sold as an Individual  Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 3"W x 18"L WT: 0.59 lbs UPC: 633590213149 Brochure (pdf)

Read more less

Instant Brass & Copper Tarnish RemoverNatural Organic salts formula Instantly Removes heavy tarnish without rubbing. Safer than traditional acid-based cleaners. Just spray & rinse. Use Indoors or Out.Instantly removes:Heavy tarnish, Rust & corrosion, Calcium deposits & stains, Heavy oxidation, Water spots & stainsSafe on:Glass, aluminum, painted surfaces, fiberglass, stucco, brick, porcelain, brass & copper. Works great on heavy tarnish, rust & corrosion, calcium deposits & stains, heavy oxidation, water spots & stains.Not for: Chrome or Patina finishes. WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Metal Box Dimensions: 2"H x 4"W x 10"L WT: 1.2 lbs UPC: 065925018066

Read more less

845 Insulator Wax - 16ozA user-friendlier version of the No. 476s paste, No. 845 stands as Collinite’s most legendary product to date. Famous for its versatility, durability, and DIY ease of use, Insulator wax is ideal for both small and large surface area jobs where lasting protection and timely job completion are desired, but hard buffing and frequent reapplication are not practical. Leaves behind carnauba shine and durable polymer coating that preserves the finish and shields against the elements: UV, rain, snow, salt, dust, dirt, grime, bugs, staining, and more. Features:  Average spread/coverage: 1,200-2,000 sq. ft. Provides high gloss shine 4-7 months of weather protection Applications: For hand & dual action buffers use The best results/spread comes from the dual action buffer Minimal buffing required, Collinite 845 Insulator Wax is Collinite’s most “machine friendly” automotive wax Many professional detailers are successfully using 845 Insulator Wax as a topper for ceramic coatings 845 will take on a thicker gel consistency in colder temperatures and a thinner liquid consistency in warmer temperatures. The different viscosities do not alter the performance. It can be used in either form 845 Insulator was can be layered after waiting 12 hours between each coat *Sold as a individual Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 8"L WT: 0.95 lbs UPC: 638234008457

Read more less

Quick Dry AdapterPremium cleaning adapters and accessories offer you flexibility and ease with your maintenance.  Whether boats, auto, RV or aviation, our cleaning adapters and accessories make protecting your investment, a simple one.Designed and constructed with quality in mind, we’re bringing innovative ideas and products to the market. Features: Allows you to use the 14" or 18" water blade  Works with the Perfect Pole telescoping handle Dry hard to reach areas like decks, hardtops, roofs, hull sides and more, quickly and easily  Adapter is adjustable to 180 degrees. *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 3"W x 9"L WT: 0.29 lbs UPC: 633590212159 Brochure (pdf)

Read more less

Clear Plastic Restorer - Step 1 - 8 oz Removes scratches, yellowing, and haze from plastic surfaces to restore clarity. Designed for isinglass enclosures, windscreens, headlights, and navigation lights on boats, cars, and RVs. The formula makes dull plastic surfaces showroom bright with minimal effort.Directions:It can be applied by hand or with a buffer. Simply apply a small amount to a soft, clean cloth and rub in a circular, overlapping motion. Allow it to dry and then buff with a soft, clean cloth. The results are impressive and fast. After the surface is clean, clear, and restored, follow up with an application of Clear Plastic Polish to seal and protect the newly-restored finish.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mold & Mildew Stain Remover - 32ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 32 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs UPC: 860007772788 Quick Guide (pdf)

Read more less

Rocker Stopper Boat StabilizerRocker Stoppers help dampen the rocking motion of boats at anchor. Simply tie Rocker Stoppers approximately 44 cm (18″) apart, making a string of them, with a 5-10 pound weight attached at the bottom of the string. Hang one string off each side of the boat. Just four units per side are what it takes on most boats to 36′. Be sure you hang them where they will always be underwater. Many people use mushroom anchors with their Rocker Stoppers because this type of weight nests well inside the last Rocker Stopper in your string. Use 10 mm (3/8″) braided nylon or 3-stranded nylon line.Use without a weight (or with a reduced weight) for drift fishing. Rocker Stoppers will slow down drift substantially. They are also great to use at the end of a dock to stabilize the tip from rocking. Rocker Stoppers nest together and each one is 33 cm (14″) in diameter.It’s lightweight and molded of high impact, virtually indestructible styrene. Can be deployed or retrieved in seconds. Unaffected by saltwater and cannot affect the sides of your boat. Units are made to “nest” within each other, so storage is a breeze.A Number of Rocker Stopper Units Needed on Each Side of the Boat (Sail or Power): Up to 26 feet (0-8 m) – 3 27 to 36 feet (8-11 m) – 4 37 to 42 feet (11-13 m) – 5 43 to 50 feet (13-15 m) – 8 Quick Guide (pdf)

Read more less

Perfect Pole - 3' to 6' ExtensionThe strongest, easiest-to-use cleaning extension poles on the market today.Patented Insta-just internal tracking system, with the exclusive Uni-Snap quick release mechanism, makes extending and collapsing the Perfect Pole quick and fool proof, eliminating frustrating alignment problems.  The button will pop up in the next hole, every time.  Changing accessories is a snap!SW45650 Our most popular telescoping handle. Ideal for RV's and boats of all sizes.Features: Telescopes from 3' to 6'  No-look tracking system for foolproof adjustments   Teardop design makes Perfect Pole up to 67% stronger than other telescoping handles Comfortable hand grip  Designed to work with Swobbit System Uni-Snap quick release accessories *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 41"L WT: 1.5 lbs UPC: 633590456508 Brochure (pdf)

Read more less

FSR Big Job Fiberglass Stain Remover - 2-LiterFSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. It can also be used anywhere else fiberglass stains may crop up-shower stalls, furniture, etc. Use for removing road soil from trailered boats and recreational vehicles. Its non-abrasive quality means that it's safe to use on white painted surfaces as well as on gel-coat. Just be sure to test a small area first to be sure FSR will not damage finish. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse.For really big clean-up jobs. 67.8 fl oz (2 liter) bottle. Specifications: Type: Fiberglass Box Dimensions: 3"H x 7"W x 10"L WT: 4.7 lbs UPC: 011698079209 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

12oz Aerosol Can - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 2"W x 10"L WT: 0.95 lbs UPC: 770153200120

Read more less

Waterless Wash & Fabric Refresher - 1qtThe Xanigo Marine Waterless Wash is the perfect way to keep the boat clean between Xanigo Marine Mold & Mildew Preventer applications without the use of harsh chemicals or wasting water. No hose or running water is needed!Protect investments by protecting against mold and mildew on seats, life jackets, vinyl, canvas, ropes, carpets, and other areas with high moisture.Specifications:Bottle Size: 1 quartThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.3 lbs UPC: 860007772740 Quick Guide (pdf)Brochure (pdf)

Read more less

Adjustable Transom SaverThe transom saver adjusts from 28 in. to 59 in. to reach where others will not on hard to access trailer crossbars that extend under the boat. Comes with easy to install bracket attachment. Fits most popular brands of trailers and is easily removed for loading and unloading.Features: Adjustable from 28 in. to 59 in. Includes bracket attachment Fits most trailer brands Easily removable Owner's Manual (pdf)

Read more less

Fresh Water Inlet - 316 Stainless SteelThe Fresh Water Inlet is designed to provide a fresh water hookup to a pressurized water system while moored. Standard female swivel hose connector. Comes complete with a black plastic watertight plug for use when not connected to onshore water. Pipe size: 1/2" FIPT x 3/4" FGHT. Constructed of corrosion resistant investment cast 316 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plug-In Locking Air-Ride Post - 14-1/4" to 21"Features: Pedestals Can Be Locked In Position To Prevent Rotating Or Unlocked To Rotate Freely Provides Safe, Stable Seating Fits Any 2-3/8″ Plug-In™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gator Patch 3" x 6" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Non-Tipping 20oz Tumbler – GraphiteThe Toadfish Non-Tipping 20oz Tumbler is made from high-grade stainless steel and is double-wall vacuum insulated to keep your drink icy cold or hot to the last sip. Featuring the SmartGrip suction technology, this tumbler will keep your drink upright and mess-free, along with being hard to tip but easy to lift.  Every tumbler comes with Toadfish's shatterproof lid, keeping you on the go without worrying about spilling your drink. Toadfish Model Number: TFNOTIP20OZTUM-GRAPHFeatures: Color: Graphite SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift. Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip. Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant. Shatterproof Lid - Durable lid with an easy-slide tab will keep your drink safe and easy to sip. How to Use:  To use, simply place the Tumbler on any smooth surface, and it will keep your drink in place (securely upright) To remove, lift directly up This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Adjustable Transom Saver - Composite - Roller/BoltProtect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during traileringProtect your boat and engine with Attwood Transom Savers: Support the cantilevered weight of the motor Stabilize engine and steering mechanism when trailering The Attwood Difference: Tough components - You'll get long life from our adjustable toggles with replaceable rubber padsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Boat/RV Polish & Gloss Enhancer16ozRestores brilliant gloss on fiberglass and painted marine or RV surfaces after cleaning. Restores valuable oils to feed and nourish the fiberglass or painted surfaces. Especially effective on dark colors. *Use polish only after the surface has been cleaned and restored to a "like new" or "average" finish.Benefits Effortless application and wipe-off in full sun Product can be safely applied with a Dual Action Polisher Product can be applied by hand High Speed Rotary Non-Scratch Creates a brilliant high-gloss surface VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 11"L WT: 1.2 lbs UPC: 070382145163

Read more less

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

Marine Aerospace Protectant  - 32ozNo other product provides this much protection for your boat and water gear.  Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean.  Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays.  It’s safe for use on outdoor gear and apparel, too.Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates.  Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage.  And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials - vinyl, rubber, fiberglass and more.No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.Features: Powerful UV blockers prevent fading, cracking and premature aging Ideal for - Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing, helmets, visors, and goggles.  Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels or headlights. Dries to a clear matte finish Restores lost color and luster Easy to use - Simply spray on and wipe dry Safe and effective for vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Corrosion Protection Box Dimensions: 3"H x 4"W x 11"L WT: 2.25 lbs UPC: 082043003507

Read more less

Sikaflex® 505UV High Performance Exterior Grade Sealant - 10.3oz(300ml) Catridge - WhiteSikaflex®-505UV is a one-component silane terminated polymer (STP) with excellent UV and weathering resistance, and excellent adhesion to a wide variety of substrates.Uses:Sikaflex®-505UV is suitable for use on a wide variety of substrates; including aluminum, steel, glass, marble, wood and many different types of plastic.Characteristics & Advantages Contains no solvents or isocyanates Low VOC content Excellent tooling characteristics Fast curing even at low temperatures Easily paintable Non-yellowing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Fuel Stabilizer - 1 GallonAMERICA’S #1 FUEL STABILIZER TREATMENTSTA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.USAGE DIRECTIONS:Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc.PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 5"H x 7"W x 10"L WT: 7.16 lbs UPC: 073905222136

Read more less

Rust Stopper - 12ozSTA-BIL® Rust Stopper is an aerosol spray that delivers a protective coating for exposed metals, preventing rust and corrosion. Untreated and treated metals can rust within weeks of exposure. STA-BIL® Rust Stopper prevents rust and corrosion by protecting metal surfaces with a long-lasting barrier while maintaining joint and pivot points to move freely. Use anywhere metal needs to be protected from rust and corrosion.  Prevents rust and corrosion – Fights the formation of rust and corrosion on exposed metal surfaces  Long Lasting Protection – Leaves a film coating on metal surfaces that is proven to withstand the test of various weather conditions  Water Resistant – Specialized formula prevents normal water erosion and keeps the protected surface from developing water stream markings resulting in uneven corrosion.  Lubricates and Penetrates – Use to lubricate parts and tools to stop squeaks and sticking  Stops Existing Rust – Once rust is present, our innovative formulation stops rust in its tracks while offering a protective coating in its place. DIRECTIONS:Shake Well before using. Apply two to three inches away from the surface (if possible) and swipe back and forth to apply an even coat on the surface of the metal.Removal: High pressure, cold water pressure wash (1,000-3,000 psi) is recommended. A standard, industrial strength pressure washer will suffice. Can also be removed by warm water detergent wash or with a commercial-grade biodegradable cleaner.Features: Prevents rust and corrosion on interior and exterior metal surfaces Corrosion inhibitor with long lasting protection preventing future rust Water resistant formula prevents normal water erosion Lubricates and penetrates to stop squeaks and sticking Stops existing rust in its tracks Made in the U.S.A. Specifications: Type: Hard Water Box Dimensions: 3"H x 3"W x 8"L WT: 1.05 lbs UPC: 073905220033

Read more less

Marine Aerospace Protectant - 1 GallonNo other product provides this much protection for your boat and water gear.  Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean.  Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays.  It’s safe for use on outdoor gear and apparel, too.Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates.  Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage.  And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials - vinyl, rubber, fiberglass and more.No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.Features: Powerful UV blockers prevent fading, cracking and premature aging Ideal for - Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing, helmets, visors, and goggles.  Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels or headlights. Dries to a clear matte finish Restores lost color and luster Easy to use - Simply spray on and wipe dry Safe and effective for vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Corrosion Protection Box Dimensions: 5"H x 7"W x 11"L WT: 8.1 lbs UPC: 082043003705

Read more less

World's Best Rope Handle Bucket - 5 Gallon - WhiteForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: White  Size: 5-gallon bucket Dimensions (inch): 14.75" H x 12" W

Read more less

Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - BlackSikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.Uses:General all-purpose, high strength marine sealant, which may be used for light duty bonding with long open time capability for humid climates or jobs requiring more time that remain permanently elastic.Characteristics & Advantages: Use above and below water line Resists salt water Paintable and sandable Excellent bond NSF approved for potable water USDA approved for incidental food contact WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Aktivator-205 Clear 250ml BottleSika® Aktivator-205 is a solvent-based colorless clear adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-205 is designed for the treatment of bond faces prior to the application of Sikaflex® and Sikasil® adhesives and sealants.   Features: Enhanced adhesion on various substrates Short flash-off time Easy to use Transparent Areas of Application:Sika® Aktivator-205 is used to improve adhesion on non-porous substrates such as metals, plastics, ceramic screen prints, and painted surfaces. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-205 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Read more less

Aluma Guard - 16oz. Spray BottleAluma Guard One-Step Protectant is the easy and safe way to restore and preserve aluminum and other metals including stainless steel, brass and chrome. Specially formulated by Rupp Marine, Aluma Guard forms a protective coating on surfaces that prevents penetration of harmful substances and restores a lasting shine. Guards against pitting and corrosion caused by the harsh effects of marine use (saltwater). Requires No Rubbing or Polishing. Sold individually. Specifications: Type: Metal Box Dimensions: 2"H x 4"W x 11"L WT: 1.5 lbs UPC: 784703101164

Read more less

Rubber Seal Protectant - 3.4oz303 Rubber Seal Protectant is an easy, convenient way to keep the rubber seals of doors, windows conditioned and pliable.  Helps protect against drying and cracking in extreme temperatures, and rejuvenate color and elasticity to old seals, keeping them looking and performing like new! Features: Conditions rubber seals on doors, windows, hoods and trunks Protects against drying and cracking in extreme temperatures Rejuvenates color to old seals, restores elasticity Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Vinyl & Rubber Box Dimensions: 3"H x 4"W x 8"L WT: 0.45 lbs UPC: 082043303249

Read more less

Marine Clear Vinyl Protective Cleaner - 32oz303 Clear Vinyl Protective Cleaner offers superior protection against the harmful effects of UV rays.  This product is all you need to safely clean and protect against yellowing and cracking of vinyl, clear vinyl, Strataglass and Eisenglass boat windows, leaving a non-streaking finish.Features: Safely cleans and protects against yellowing and cracking of vinyl and clear vinyl Safe for use on vinyl windows like Strataglass™ and Eisenglass Leaves a non-streak finish with no left behind residue Provides superior UV protection Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Vinyl & Rubber Box Dimensions: 3"H x 4"W x 12"L WT: 2.25 lbs UPC: 082043302150

Read more less

Throttle Knob - 1-7/8" - Gold GroovesFeatures: 316 Cast Stainless Steel 1-7/8" Throttle Control Knobs Fit Hynautic D-Dec/Sturdy Controls Throttle Knobs are colored for Sight and Grooved for Feel - Meets ABYC Specifications

Read more less

Seafood Bowl - 12" - Stainless Steel - 2 Layer Serving BowlServe seafood the way it was meant to be enjoyed—fresh, flavorful, and beautifully presented. This elegant, dual-purpose serving bowl is perfect for everything from chilled oysters to sizzling paella. The vented, two-layer design is self-draining and allows users to serve cold seafood over ice without the mess of puddling water. Flip the top layer to create a snug lid that keeps hot dishes warm while minimizing condensation. Whether users are plating cocktail shrimp, tuna tartare, or a steamy seafood medley, this bowl brings both function and sophistication to the table.Specifications: Construction: Stainless steel Bowl Base Size: 12.5” Bowl Height: 3.25” (first layer) Bowl Height: 1.75” (second layer) Quick Guide (pdf)Brochure (pdf)

Read more less

World's Best Rope Handle Bucket - 3.5 Gallon - WhiteForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: White  Size: 3.5-gallon bucket Dimensions (inch): 10.75" H x 12" W

Read more less

World's Best Rope Handle Bucket - 3.5 Gallon - BlackForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: Black Size: 3.5-gallon bucket Dimensions (inch): 10.75" H x 12" W

Read more less

Bucket Seat/LidFeatures: Contoured, durable and soft lid for seating Protects bucket contents from weather Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 12"W x 12"L WT: 0.9 lbs UPC: 703485121092

Read more less

LifeSeal® Sealant Cartridge - WhiteA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free. Owner's Manual (pdf)

Read more less

Heavy Duty Oxidation Remover16ozRemoves moderate oxidation, scratches, stains and tough water spots on all fiberglass gel coat marine or RV surfaces. Restores color by effectively removing surface degradation.Benefits Effortless application and wipe-off in full sun Product can be safely applied with a Dual Action Polisher Product can be applied by hand High Speed Rotary Non-Scratch Brings back to like-new condition VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 9"L WT: 1.3 lbs UPC: 070382149161

Read more less

Classic Stainless Steel Straight Wiper Blade - 11" Classic Stainless Steel Straight Wiper Blade replaces most standard blades on boats before 1990. It offers a "hook and catch" style arm as opposed to the current "slide and lock" system.Features: Durable, marine-grade stainless steel frame Replaces most standard blades on boats before 1990 Hook and catch style attachment Specifications: Length: 11" Frame material: Stainless steel Attachment: Hook and Catch style

Read more less

Deluxe Stainless Steel Wiper Blade - 16"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

SikaBiresin® AP077 White Gallon BPO Hardener RequiredSikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films.Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage:SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates.Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below waterline applications

Read more less

Rod Holder Gimbal Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Large, 30" by 12-5/8" deep with towel bar. UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large has hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 10.2 lbs UPC: 035514326728

Read more less

Drop-In Hidden Horn V.3 with Grills Drop-In Hidden Horn V.3 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet screw-in grill. Hole size 2-3/4” diameter. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577066.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 9"W x 15"L WT: 0.85 lbs UPC: 035514432078

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Trolling Motor Mount for MK, Garmin, Rhodan, & Power PoleThe Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.Features:Maneuverability and PositioningThe Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.Adjustable Stowed PositionThe ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.High-Quality MaterialsThe use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.Corrosion ResistanceThe anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.Stainless Lock Pin and HardwareThe utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.Backing Plate for StrengthThe inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.Easy InstallationThe patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.CompatibilityQuick release bracket necessary for install with trolling motorComes pre-drilled for the quick release brackets for the followingMinn Kota Ulterra Terrova Quick release bracket models RTA 54/62 (fits all 36V permanent magnet motors)Minn Kota Quest Instinct Quest Terrova Quest Ulterra Quest Quick release bracket RTA 55/56 (fits all new Brushless/Quest motors)*Minn Kota RTA17 (fits all 24v motors for Smaller units)GarminKraken 24v/36v 48" to 110"Rhodan Large mount 6 bolt 36v 84"/96"108"/120" Smaller mount 4 bolt 24v Power PoleMOVE PV offshore trolling motors up to 96" shaft length (need a Sea Swivel XL for the 110" shaft length model)Limited Lifetime WarrantyFor salt water or fresh water use. Sea Swivel offers a limited lifetime warranty.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has a 6-minute working time and develops working strength in 40 minutes. AT-8040 has a 12-month shelf life when stored at 72°. Weld Mount recommends that wherever possible this adhesive be refrigerated. Packaged in a 30ml cartridge this adhesive does not require the adhesive gun or mixing tips. The 30ml cartridge will bond 30-50 parts. Quick Guide (pdf)Owner's Manual (pdf)

Read more less