Sikaflex®-292 - White - 10oz Tube with NozzleSikaflex®-292 is a non-sag 1-component polyurethane adhesive of thixotropic, paste-like consistency that cures on exposure to atmospheric moisture. It exhibits excellent adhesive properties and good mechanical strength.Features: Good gap-filling properties Can be painted Bonds well to a wide variety of substrates Wheelmark approved  Solvent-free and very low VOC Areas of Application:Sikaflex®-292 is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable to bond metals, particularly aluminum (including anodized finishes), metal primers and paint coatings (2-component systems),ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc. Seek the manufacturer’s advice and perform tests on original substrates before using Sikaflex®-292 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, and dust. Surface treatment dependson the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart.Consider that these suggestions are based on experience and have in any case to beverified by tests on original substrates.Application:Sikaflex®-292 can be processed between 10 °C and 40 °C (climate and product) butchanges in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use.Tooling & FinishingTooling and finishing must be carried out within the skin time of the sealant. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-292 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.Note: The domestically produced Sikaflex®-292 is not IMO certified Quick Guide (pdf)

Read more less

VR-140 PRO Mirror - BlackThe 6″ x 20″ VR-140 PRO offers unparalleled viewable range and clarity via prescription-grade optics.  For the first time ever, the boat driver can follow a skier (or wakeboarder, tuber, wake surfer, etc.) from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The premium mirror is housed in UV-resistant engineered polymer.  The spherical-tension socket provides infinite positioning for superior stability in the roughest waters.Click Here to Find Your Mirror Bracket Bracket sold separate.*Does not include cover*Sold as an Individual

Read more less

Standard Wiper Motor - 2.5" Shaft - 12V Features: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 80° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years

Read more less

Active Imaging 3-in-1 Nosecone for Ghost Trolling MotorAnglers get powerful fish-finding capability and high-resolution images of structure and cover below and to the sides of the boat with the optional Active Imaging 3-in-1 Nosecone transducer with Lowrance CHIRP, SideScan and DownScan Imaging™. The Active Imaging 3-in-1 Nosecone is easy to install and gives anglers with a compatible display the option to view the best of Lowrance CHIRP and DownScan Imaging on one screen with the exclusive FishReveal™ view.Features Easy to Install Supports 83/200/455/800kHz frequencies Lowrance CHIRP SideScan DownScan Imaging FishReveal™ Temperature Sensor

Read more less

Wireless Remote Key FOBWireless remote for use with Xi series motorsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Trim Plate Retrator for ST TabsThe PR500 Bracket assembly enables Lectrotab SMART TABS to be set in two different positions without the need for any additional tools. When the bracket handle is in the “Down” position, the SMART TABS will function as trim tabs. When the bracket handle is in the “UP” position, SMART TABS will be fully retracted. The brackets are ideal for use when storing a boat, beaching a tender, or in very shallow water conditions, such as those found near the beach. Replaces the standard transom bracket.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Teak Brite® Advanced Formula Teak Oil - 32ozMost advanced teak oil and sealer available. Will deliver long lasting protection even in tropical climates. Penetrates deep into wood (dry wood only) to feed and protect finish. Compatible with Life-Calk® seam compounds. (Hint: for a fantastic finish, allow teak to dry for at least 24 hours minimum before applying oil). Specifications: Type: Teak Box Dimensions: 3"H x 5"W x 7"L WT: 2.1 lbs UPC: 020537011881

Read more less

Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX-1421-4  - 4-Blade - 14" x 21 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 21 Material: Stainless Steel Diameter (Inches): 14" Rotation: Right Box Dimensions: 8"H x 16"W x 16"L WT: 16.85 lbs UPC: 652480200892 Quick Guide (pdf)Brochure (pdf)

Read more less

Non-Tipping 20oz Tumbler – TealThe Toadfish Non-Tipping 20oz Tumbler is made from high-grade stainless steel and is double-wall vacuum insulated to keep your drink icy cold or hot to the last sip. Featuring the SmartGrip suction technology, this tumbler will keep your drink upright and mess-free, along with being hard to tip but easy to lift.  Every tumbler comes with Toadfish's shatterproof lid, keeping you on the go without worrying about spilling your drink. Toadfish Model Number: TFNOTIP20OZTUM-TEALFeatures: Color: Teal SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift. Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip. Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant. Shatterproof Lid - Durable lid with an easy-slide tab will keep your drink safe and easy to sip. How to Use:  To use, simply place the Tumbler on any smooth surface, and it will keep your drink in place (securely upright) To remove, lift directly up This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Reed Switch Fuel Sender - 150 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 6" (150mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064352

Read more less

Replacement Control Box f/123DR-V2Replacement Control Box f 12 & 24 Volt dual Actuator Systems - 123DR-V2WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

30A 125V Power Inlet303SSEL-BProduct Features Solid cast 316 stainless steel Locking waterproof cap Easy Lock System Soft Touch cap stays open in the upright position 8-way right angle rear safety enclosure WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Box Dimensions: 4"H x 6"W x 9"L WT: 1.25 lbs UPC: 093344300172 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Hydraulic Steering Fluid - QuartThis is a perfect formulation for the most demanding marine environments. Engineered for use in all hydraulic steering solutions.Features: Applications: All Hydraulic Steering Systems High viscosity index Corrosion inhibited Oxidation resistant Excellent anti-wear performance Specifications: Size: Quart Type: ISO 15 Low Temp Mineral Hydraulic Fluid

Read more less

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

16oz Stainless Steel CleanerThis is a phosphoric acid-based stainless steel cleaner. Features: It removes rust staining and surface corrosion from polished marine-grade stainless steel  Shelf Life at 23 degrees Celsius is 24 months  Specifications: pH Value: 1.0 Size: 16oz bottle Contents: Contains non-ionic surfactants < 5%  Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used Recommended UseUsed for cleaning rust staining and surface corrosion from polished marine-grade stainless steel.Surface PreparationApply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge.Pre-treatmentClean with detergent.StorageThis product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Specifications: Type: Metal Box Dimensions: 3"H x 3"W x 9"L WT: 1.5 lbs UPC: 751354099393 Quick Guide (pdf)

Read more less

SWIVL-EZE LakeSport 2-3/8" Seat Mount with Friction Control - AluminumLakeSport Seat Mount is 2-3/8 inch Locking AO-Aluminum, with Friction Control, 3 Degree Tilt, ABYC Code - AO, Installed Height - 5/8 inch, Bulk Packaging. Hardware is Engineered to Exceed ABYC Standards Type A/Operator Models lead the industry with these features: Ergonomic positive-locking handles with stainless steel components inch-Slot inch locking channels (on adjustable-height models) are the safest manual adjustment available. All Models are reinforced for strength: All LakeSport posts are swaged and welded to the bases Bases have underside ribs for superior strength.

Read more less

SWIVL-EZE LakeSport 2-3/8" Extension Post - 13" HighFixed height lake sport Series pedestal seat extension post 238613L1 is 13 inches high. A great extension post for 238 lake sport seat mounts and socket bases. For use on fishing, pontoon, or cruising boats to provide seat elevation. Attwood develops high-value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.Features: Hard anodized, corrosion-resistant aluminum seat pedestal The locking latch has a low-friction ramped bottom for smooth Insertion into the base The release button operates smoothly requiring less effort to unlock post from 238 series base SELECT from Lake Sport series posts to get the perfect height for your boating fun All Springs are stainless steel Height measured from deck to top of seat mount

Read more less

1K HS Clear - 20oz Aerosol Can - Gloss Finish1K HS Clear is a high solids clearcoat, perfect for refinishing small accessories, door jambs, underhoods, inner panels, and new part cut-ins.Features: Improved fan pattern is second only to a spray gun Three gloss levels: gloss, semi-gloss, and matte Matches OEM finishes  Quick drying for increased production Shop floor compliant (NESHAP 6H) Save time and material Reduces repair time and steps to maximize shop efficiency Applications: Ez Coat™ Factory Pack™ Basecoat Properties: 20 oz. aerosol Coats: 2 - 3 medium coats Flash Time: 3 - 5 min between coats Coverage: 28.6 sq ft. @ 1 mil DFT

Read more less

Gator Patch 3" x 18" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

SingleViu 52mm (2-1/16") Water Temp. Gauge - 250° F - 291-22 OHMSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software. Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*291 - 22 Ohm Sender RequiredFeatures: 320-22 Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Water Temperature Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590683588 Owner's Manual (pdf)

Read more less

Smart Tab Trim Tabs 12" X 9" for 18'-22' Boats with 150-240 HPIf these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self-adjust and perform better for less money?The breakthrough technology in trim tabs is completely automatic, requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33% Faster Acceleration Increase top speed Provide a level, more comfortable ride at lower speeds Improve fuel economy, handling, and safety NO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).SPEED REGULATEDNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance. It will reduce the minimum planning speed by 33%Provide a level, more comfortable ride at lower speedsImprove economy, handling and safety.As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.INSTALLATION IS SIMPLEWith an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.*All mounting hardware, instructions, and templates are included.*SMART TABS require NO THROUGH HULL DRILLINGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Hydraulic Construction: Stainless Steel Box Dimensions: 5"H x 9"W x 12"L WT: 6.05 lbs UPC: 698690129189

Read more less

Drink HolderDrink holder with bulkhead/gunnel mount and rod holder post mountFor cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Lexan cover protects electrohydraulic unit from occasional wash down. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Chesapeake White SS 2" Depth Sounder with Thru-Hull TransducerPerimeter-lighted black dial with stylish Blue and White graphics, polished stainless steel bezel, and domed glass lens.The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.  Depth Sounder includes a Faria SN2060 thru-hull mount transducer w/26' cable.2" - Hole Size: 2.0625" (53mm)Specifications: Imperial and Metric Values Domed Glass Anti-fog, Scratch Resistant Lens Programmable Keel Offest  Stainless Steel Bezel 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Factory P/N DS0110*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Type: Depth Sounder Voltage - Input Range (Volts): 12/24 V Series: Chesapeake White Gauge Size: 2" Box Dimensions: 8"H x 8"W x 9"L WT: 2.1 lbs UPC: 759266138940 Owner's Manual (pdf)

Read more less

HDO Black Finishing Polishing Pad with CCS Technology 6.5" x 1"Conventional foam pads absorb polish too quickly. This reduces polish and pad performance because most of the polish is trapped below the working surface of the pad. CCS Technology™ solves this common problem using strategic patterns of partially closed foam cells. Benefits: Finish - Black foam pads are used for final refinement, jeweling & very light swirls on soft paint. Use with extra fine finishing polish.  The black foam works to refine your corrected surface to a flawless gloss, removing any trace of cutting haze from the correction stage(s) above. On very soft paints, the black foam could also work as a one-step process to remove very light swirls and finish perfectly in one go. Slow Rate of Polish Absorption – CCS pockets gradually release polish as needed by the operator. Prevents Pad Skipping – CCS pockets reduce surface tension, allowing the operator to run the pad flat on the working surface. Dual Layer – The dual-layer design reduces lateral/horizontal movement, resulting in a reduction of friction inside the pad, which increases durability by eliminating excessive heat and reducing foam fatigue. Fits Backing Plate: 6" Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 7"L WT: 0.2 lbs UPC: 850052845841 Quick Guide (pdf)

Read more less

Classic Stainless Steel Straight Wiper Blade - 14" Classic Stainless Steel Straight Wiper Blade replaces most standard blades on boats before 1990. It offers a "hook and catch" style arm as opposed to the current "slide and lock" system.Features: Durable, marine-grade stainless steel frame Replaces most standard blades on boats before 1990 Hook and catch style attachment Specifications: Length: 14" Frame material: Stainless steel Attachment: Hook and Catch style

Read more less

APEX Surface Mount for Starlink Mini - WhiteThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance.The APXMDM features end caps made from machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. These end caps are securely attached to black hard-anodized aluminum strips, providing the strength needed to firmly mount the Starlink Mini antenna on any flat surface, whether stationary or in motion.Enhanced Support for Mobile ApplicationsWhile the Starlink Mini Antenna comes with a pressure-fit kickstand suitable for flat, non-mobile surfaces, it requires additional support when mounted on a vehicle or other fast-moving vessel. The Seaview APXMDM mount offers a reliable and easily assembled solution, ensuring your antenna stays securely in place.Complete with Waterproof Cable SealIncluded with the APXMDM is Seaview's CG2090W horizontal cable seal, providing a waterproof entry point for your cables, essential for maintaining the integrity of your setup in any environment.Optional Removable Base KitFor added convenience, you can opt for the optional removable base kit (APXMDMRB) to easily remove the Starlink Mini antenna when needed.Choose the Seaview APEX APXMDM for a durable, reliable, and easy-to-install mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

Flush DrinkholderCut-Out: 3-7/8"Outer Diameter: 4-3/8"Depth: 2-1/4" - 3-1/8"Material: 304 Stainless Steel Includes mounting gasket, pad & 3/8" drain tube Fits cans, bottles & can coolers

Read more less

Perfect Pole - 5' to 9' ExtensionThe strongest, easiest-to-use cleaning extension poles on the market today.Patented Insta-just internal tracking system, with the exclusive Uni-Snap quick release mechanism, makes extending and collapsing the Perfect Pole quick and fool proof, eliminating frustrating alignment problems.  The button will pop up in the next hole, every time.  Changing accessories is a snap!Ideal for RV's and boats of all sizes.Features: Telescopes from 5' to 9'  No-look tracking system for foolproof adjustments   Teardop design makes Perfect Pole up to 67% stronger than other telescoping handles Comfortable hand grip  Designed to work with Swobbit System Uni-Snap quick release accessories *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 66"L WT: 2.3 lbs UPC: 633590456607 Brochure (pdf)

Read more less

2-3/8" Stowable Post ClipsConveniently stow your 2-3/8″ posts when not in use. (sold in pairs, for bulk see #2400104).

Read more less

One Box Indication Unit for BOLT Electric SystemAn attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster, and correct listing. Features: Convenient “All Up” and “All Down” buttons Trim tab position LEDs always show you where your tabs are Auto tab retraction (tabs retract up when the ignition is powered off) Easy-to-install single lock nut design Backed by Bennett’s outstanding customer support This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

Marine Formula™ 10oz AerosolMarine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remove these common marine adhesives and sealants. Quick Guide (pdf)

Read more less

Mercury 15, 20 EFI Remote Throttle/Tiller (2018-Present) & Tohatsu 9.9, 15, 20 EFI Remote Throttle/Tiller (2018+)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Recon™ Quick Release Bracket - HD Composite - BlackRemoving the trolling motor from a boat is quick and easy with the Heavy-Duty Composite Quick Release Bracket. Compatible with all Lowrance electric steer trolling motors and most non-Lowrance electric steer motors. The trolling motor is fastened securely to the boat with the bracket’s locking U-bar design, and a security locking point is available for use with a padlock (sold separately). Features: Compatible with all Lowrance electric steer trolling motors and most non-Lowrance freshwater electric steer motors Locking the U-bar secures the trolling motor to the baseplate Designed for use in freshwater environments Available security locking point for use with padlock (sold separately)

Read more less

Soft Washing Tool Uni-Snap and AdapterA professional wash made quick and easy.  Holds plenty of soap and water.Not recommended for non-skid or rough surfaces. *Includes adapter and bonnet Features: Over 70 sq. inches of cleaning surface Safe for all finishes including paint, fiberglass, windows and enclosures Dual-axis swivel head follows curves and contours for quick washing Uses replacement bonnets SW19140 *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 8"W x 14"L WT: 0.76 lbs UPC: 633590191409 Brochure (pdf)

Read more less

Rust Stain Remover - 500mlWhy use Marine Rust Stain Remover?Rust Stain Remover is an aquatic-safe safe strong surface cleaner that can be applied to coated or uncoated paint or gel coat to remove rust, minerals, and other contaminants from a vessel’s surface to help preserve the look, shine, and color of your pride and joy.Features: Aquatic safe Dissolves Rust Particles Fast Coating safe Simple steps to help you get the best results: Use in a well-ventilated area, out of direct sunlight Remove loose dirt using a hose or jet wash Shake the bottle well and wear gloves Spray the Rust Stain Remover directly onto the surface and leave to dwell for 3-5 minutes; during this time, ferrous particles will dissolve, forming a purple solution Do not allow the product to dry on the surface Rinse residue and repeat if necessary Where the surface is heavily soiled, you can agitate Rust Stain Remover with an MF1 ZeroR Microfibre Buff Cloth or a suitable soft-bristled brush Store in a cool, dry place Use within 12 months of opening Specifications: Type: Hard Water Box Dimensions: 3"H x 3"W x 8"L WT: 1.2 lbs UPC: 5060147725261

Read more less

Fiberglass Cleaner for Heavy Oxidation - 1lbFlitz Fiberglass Cleaner – Heavy Oxidation & Tarnish RemoverRestore the brilliance of your surfaces with Flitz Fiberglass Cleaner, the ultimate solution for tackling heavy oxidation, stains, and buildup. This premium formula works as a fiberglass polish, metal polish, and tarnish remover, effortlessly eliminating dullness, chalky residue, and discoloration.Perfect for boats, RVs, motorcycles, and outdoor equipment, it revives faded fiberglass, aluminum, brass, and more, leaving a smooth, polished finish with long-lasting protection. Whether you're restoring a classic car, polishing marine surfaces, or reviving weathered gel coat, Flitz delivers professional-grade results.Bring back the shine with a fiberglass cleaner that works as hard as you do. Tough on oxidation, gentle on surfaces—Flitz makes restoration easy!Features: Removes Heavy Oxidation: Safely cuts through thick layers of oxidation, revealing a fresh, smooth surface underneath. Non-Abrasive Formula: Cleans without scratching, preserving the integrity of your fiberglass. Easy to Apply: Simply apply, wipe, and buff! Leaves no messy residue! Versatile Use: Ideal for boats, RVs, and other fiberglass equipment. Bring back the shine to your fiberglass with Flitz Fiberglass Cleaner for Heavy Oxidation—designed for maximum cleaning power and a glossy, polished finish!Safely Removes:Tarnish, Rust, Water Stains, Chalking, Lime Deposits, Heat Discoloration, Lead & Powder Residue, Oxidation, Fingerprints, Bugs, Tar, Bird Droppings, Graffiti, and Dyes.Safely Cleans & Protects:Brass, Copper, Silverplate, Sterling, Chrome, Stainless Steel, Nickel, Bronze, Solid Gold, Aluminum, Anodized Aluminum, Pewter, Magnesium, Beryllium, Platinum, Acrylic, Factory Hot Gun Bluing, Painted Surfaces, Fiberglass, Plexiglass, Eisenglass, Glass, Cultured Marble, and more!*NOT FOR ELECTROPLATED FINISHES! Specifications: Type: Fiberglass Box Dimensions: 4"H x 4"W x 4"L WT: 1 lbs UPC: 065925034165

Read more less

Marine Touchless Sealant - 128ozHave you had trouble finding time to fully wax your car?  303® Touchless Sealant will save you hours! This Si02 formula is a completely TOUCHLESS quicker alternative to waxing your vehicle. Simply spray on, and rinse off – it’s that easy!  It only takes minutes to get that same water beading protection you get from a full wax, saving you hours spent in the garage.   It’s also great for those looking to prolong the time in between waxes, or ceramic coatings. Safe for clear coat, gel coat, fiberglass, plastics, windshields, and wheels too!Usage Directions:Wash your car out of direct sunlight while the surface is cool. While the surface is still wet and out of direct sunlight, spray a small amount of product evenly across the surface, treating one section of the vehicle at a time. Only a light mist of the product is needed. Immediately rinse the section off. You will see water beading on the surface, meaning it is now protected. Repeat the steps on all sections of the vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.Features: Provides superior water beading Protects against paint fading Lasts up to 2x longer than traditional wax! Simply spray on, and rinse! Also great for use on windshields and wheels! 128 fluid oz. 303 Touchless Sealant is safe to use on a variety of surfaces, such as:Paint Clear coat Wheels Glass Plastics Fiberglass Gel-coat Aluminium Hard plexiglass And more! Specifications: Type: Waxes & Polishes Box Dimensions: 5"H x 7"W x 10"L WT: 8.7 lbs UPC: 082043303997 Quick Guide (pdf)

Read more less

Diesel Formula Fuel Stabilizer & Performance Improver - 32ozSTA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer – Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.BOTTLE DIRECTIONS:To measure small quantities of this diesel fuel additive: remove small cap and seal (on long neck) squeeze bottle to desired level, and pour. To measure large quantities of fuel treatment: remove large cap and seal, pour (measurements on bottle side).USAGE DIRECTIONS:For in-season use: 1 oz. (30mL) treats up to 10 gallons (38L) of fuel. For storage: Use 1 oz. (30mL) to 5 gallons (19L).  DO NOT OVERTREAT. Diesel Formula STA-BIL® is recommended for use AT EVERY FILL UP for year round protection. Product does not contain alcohol.Features: Diesel fuel additive that prevents sludge and sediment formation Clean & lubricate entire fuel system Protect against corrosion with specially formulated diesel fuel STA-BILizers Reduces oxidation of diesel fuel caused by thermal breakdown Removes water Compatible with all ULSD & biodiesel blends Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 5"W x 10"L WT: 2.05 lbs UPC: 073905222549

Read more less

Sikaflex® 521UV UV Resistant LM Polyurethane Sealant - 10.3oz(300ml) Cartridge - WhiteSikaflex®-521 UV is a multi-purpose, UV resistant, non-sag, elastic, one-part silane-terminated polymer sealant, which cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex-521 UV is solvent and isocyanate free.Uses:Sikaflex®-521 UV bonds well to a wide variety of substrates without the need for special pre-treatment and is suitable for making permanent, high strength elastic seals. Compatible substrate materials include wood, metals, (particularly aluminum including anodized components), sheet steels (including phosphated, chromated and zinc-plated components), metal primers and paint coatings (two-part systems), ceramic materials, plastics and glass.Characteristics & Advantages: Very low VOC/solvent free Silicone and PVC-free Isocyanate-free High electrical resistance Resistant to aging and weathering WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Replacement 5" Dual Action Polisher Backing PlateFeatures: Designed specifically to work with Shurhold's Award winning Dual Action Polisher. 5" (125mm) polyurethane backing plate with 5/16" (24) treaded post Quick release hook and loop system, works with most 5.5" - 6.5" (140 -165mm) Velcro style pads Specifications: Type: Buffers & pads Box Dimensions: 1"H x 5"W x 5"L WT: 0.3 lbs

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum GraySikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses:Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.Characteristics & Advantages: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white) UL listed for potable water (black, gray, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Single Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

Instant Hull Cleaner - Easy to Use Gel Formula - 32 oz New Gel formula "sticks" where applied for maximum cling time and cleaning power. Spray onto the surface being cleaned. The use of rubber gloves is recommended. Allow to remain on the surface until the stain disappears, then rinse thoroughly with fresh water. Stubborn stains or spots may require a repeated application with longer soak time and gentle scrubbing. For best results, use when the temperature is over 50°F. To shine and protect the newly cleaned hull, apply any of Star brite’s Marine Polishes.Directions:Spray onto the surface being cleaned. Use of rubber gloves is recommended. Allow to remain on the surface until the stain disappears, then rinse thoroughly with fresh water. Stubborn stains or spots may require a repeated application with longer soak time and gentle scrubbing. For best results, use when the temperature is over 50°F. To shine and protect a newly cleaned hull, apply any of Star brite®’s Marine Polishes. NOTE: Avoid contact with fabrics and anti-fouling bottom paint as the product may cause discoloration. Some inferior quality decals may be discolored by this product; care must be taken to keep spray or drips off of these surfaces. Take precautions to prevent contact with boat trailers and any other surfaces that are not intended to be cleaned. Star brite’s liability is limited to the purchase price of this product.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mold & Mildew Stain Remover  - 32oz303 Mold & Mildew Stain Remover quickly and safely cleans and removes tough mold and mildew stains from virtually any water-safe surface.  Unlike other mold & mildew cleaner products on the market, this product does NOT contain bleach, and will leave behind a fresh scent, with no strong odors to worry about during or after use. Works safely on vinyl, plastic, painted surfaces and even safe enough for use on fabric.Features: Quickly removes mold & mildew stains on contact Does not contain bleach Works on ALL water-safe surfaces Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Diethanolamine,Ethylbenzene which are known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 4"W x 12"L WT: 2.3 lbs UPC: 082043305748

Read more less

Sikaflex® 295 UV - White - 10oz Tube with NozzleExterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of ApplicationSikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application:Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.Tooling & FinishingTooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.OverpaintingSikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less