Fresh Water Inlet - 316 Stainless SteelThe Fresh Water Inlet is designed to provide a fresh water hookup to a pressurized water system while moored. Standard female swivel hose connector. Comes complete with a black plastic watertight plug for use when not connected to onshore water. Pipe size: 1/2" FIPT x 3/4" FGHT. Constructed of corrosion resistant investment cast 316 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Control Valve/Regulator - Low Output Replacement valve/regulator.Compatible Devices: A10-205  A10-205-CSA  A10-205AU-1  A10-207-3  A10-207-3-CSA  A10-207-3AU-1  A10-215  A10-215-CSA A10-215AU-1  A10-217-3  A10-217-3-CSA  A10-217-3AU-1  A10-703  A10-703-CSA  A10-803  A10-803-CSA  A10-918-2  A10-918-2-CSA A10-918-2GS  A10-918-2GS-CSA C10-603T  C10-603T-CSA *Sold as an Individual Quick Guide (pdf)

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Read more less

Rod Holder Gimbal Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Large, 30" by 12-5/8" deep with towel bar. UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large has hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 10.2 lbs UPC: 035514326728

Read more less

Crab/Lobster Tool Set - 2 Shell Cutters & 4 Seafood ForksThe most innovative crab and lobster tools on the market. Everything you need to open and enjoy fresh, hard-shelled seafood without the mess. Also, for every product sold, Toadfish will replant new oyster beds to help clean our coastal waters. Let’s Put ‘Em Back.Toadfish Model Number: TFCRABLOBSETProducts Included:2x Shell CuttersFlawlessly cuts shells instead of smashing them. Creates less mess and stunning presentations. Works on all species of hard-shelled crustaceans: blue, stone, Dungeness, rock, and lobster. Includes a built-in bottle opener. Patent Pending.4x Seafood ForksA multi-use fork with a scoop on one end and a fork on the other, allowing you to pull out those hard-to-reach pieces of delicious meat with ease.For Seafood LoversWhen it comes to great seafood, it’s all about fast, simple access to the good stuff. Our pair of serrated cutters let you neatly open shells to quickly dive in. Use the multi-use forks with a helpful scoop on one end and a fork on the other. No chips, splinters, or frustration, just a great time digging in & feasting on your favorite meal.The Perfect Gift SetInvited to a beach cookout or seafood bash? Bring the host a Toadfish Crab & Lobster Tool Set and you’ve got a friend for life. Or host your own shellfish soiree with your set on display. Each piece is a delight for the senses, beautiful in looks, and a joy to hold with a super-comfortable ergonomic form.

Read more less

Drink HolderDrink holder with bulkhead/gunnel mount and rod holder post mountFor cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Four Drink/Binocular Rack - TeakFeatures: 14-1/4"L x 4"W x 3-1/2"H Holds 4 cans or bottles, or 2 drinks and one pair of binoculars

Read more less

Horizontal Mount Enclosure with Additional 5' Feeder HoseFor installing a washdown hose on our boat, home or spaHoseCoil's Horizontal Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 5' HoseCoil constructed of high performance polyether material. HoseCoil features solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection.The Horizontal Mount Enclosure can be used to plumbed directly into your existing pressurized water system or raw water washdown pump. Included is a 5' feeder hose for direct connection to an external water spigot. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 11"W x 23"L WT: 4.5 lbs UPC: 659988116823

Read more less

Toilet Tissue Rack Spring-loaded bar 1-7/8"H x 5-1/2"W x 3-3/4"D

Read more less

Stand-Up Paper Towel Holder 13-1/2"H x 5-7/8" diameter Fits standard or jumbo roll Oiled finish

Read more less

Propane /Butane Canister Storage Locker/Tote Bag - Pacific BlueSafe, convenient and essential for boats without approved propane or butane gas storage lockers.  Features: Stows 3 disposable butane or propane canisters safely out-over-the-water Has heavy nylon adjustable straps with snap connectors for attaching to a horizontal rail or lifeline Made of water and fade resistant heavy duty breathable process dyed acrylic boat cover material. *Sold as an Individual 

Read more less

Coil Hose - 40'Camco’s 40-Foot Coiled Hose is ideal for marine use, as well as general cleaning, car washing and daily gardening. It features strain relief to help prevent kinking. Brass hose fittings are both durable and rust resistant. The hose self-coils for easy storage. Includes a 1-year limited warranty.Features: 40-foot coil hose is ideal for marine use, as well as general cleaning, car washing and daily gardening Strain relief reduces kinking Brass hose fittings are durable and rust resistant Hose self-coils for easy storage 1-year limited warranty *Storage bag not included

Read more less

Large Stainless Steel Cupholder (Fits YETI)Features: Wider mouth fits larger water bottles and can coolers (including Most Yeti Sizes) Drink pad made with UV-resistant vinyl for longer life Drink pad cushions a beverage Vinyl pad affixed without adhesive Includes Thick Mounting tap & 3/8" drain tube Specifications: Material: 316 Stainless Steel For Use In: Freshwater and Saltwater Cut Out: 4-1/8" O.D.: 4-11/4" Depth: 3-1/8"

Read more less

Electronic Pulse Ignition Retro-Fit KitUpgrade and replace the piece for the Piezo igniter. The Electronic Pulse Ignition kit lights the first time and every time with the battery operation. Includes one (1) AAA battery.Compatible With: 10-960 12-662 *Sold as an Individual

Read more less

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Read more less

Rectangular 12" x 18" Grill Cover - Navy BlueThese grill covers are designed specifically to fit any Magma rectangular grill with a 12” X 18” grilling surface and are available in boating’s most popular colors.  Constructed from breathable solution-dyed acrylic fabric that is water and fade-resistant.  The material is guaranteed with a 5-year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals.  The convenient drawstring and cam-lock assembly keep it secured while underway or in windy conditions.Compatible With:Magma rectangular grill with a 12” X 18” grilling surface*Sold as an Individual 

Read more less

Anti-Slip Stomp Pad Set - 3.75" x 12.75"Features: EVA foam for a soft cushion Textured finish for extra grip Laser Etched Logo 3M pressure adhesive on the backside Stick on top of Sacs to walk over

Read more less

Soft-Mate Can and Air Horn HolderFeatures: Perfect size for beverage cans, hand held air horns Flexible P.V.C. Includes mounting screws Height: 3-2/2" (8.9cm) Width: 4" (10.1cm) Diameter: 2-3/4" (7.0cm)

Read more less

Universal Flush Mount Frame for NRX130 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic NRX 130 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame

Read more less

Universal Flush Mount Frame for NRX 35/50 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic NRX 35, and NRX 50 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 20"W x 24"L WT: 5.9 lbs UPC: 808282390013

Read more less

Rubber Tip Nozzle with Comfort GripTough & Rugged Deluxe Hose Nozzle with Comfort Grip and Impact Resistant Rubber Tip.Features: TOUGH & RUGGED: Well constructed from premium ABS material with sturdy components throughout.  ERGONOMIC SOFT RUBBER COMFORT GRIP: The soft rubber handle makes this nozzle very comfortable in your hand so you can water for long periods of time. FLOW CONTROL LEVER: Easy Lever control of the water pressure means that you can adjust the pressure for different uses. Choose from a soft, delicate shower all the way to a high-velocity jet.  IMPACT RESISTANT RUBBER TIP: Won’t damage delicate surfaces when dropped. Won’t damage nozzle when dropped.  FITS ALL STANDARD GARDEN HOSES: This nozzle features 3/4” connectors. Perfect for watering Your Garden, Lawn, and Flower Beds. It’s also Great for washing your Car, Boat or RV.  100% Customer Satisfaction Guarantee: Every HoseCoil product enjoys a 2 year warranty. Specifications: Weight: 8oz. Dimensions: 9" x 6" x 2" Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 6"W x 9"L WT: 0.4 lbs UPC: 659988121889

Read more less

75' Blue Flexible Hose Kit with Rubber Tip NozzleHoseCoil Flexible Hose Kits are designed and built for durability. The hose has a 600 PSI rating and is protected by a UV-resistant l0O0D Tetoron fabric outer cover. This material is extremely tough, with excellent resistance to abrasion and fading. It is mold and water-resistant, dries quickly, and is designed to easily slide across surfaces without getting snagged or leaving marks like some traditional garden hoses. The hose fittings are built from non-marring sturdy black plastic, and the spigot fitting features a brass end for added strength. The fittings are field¬serviceable, meaning that they can be disassembled and reassembled if the hose ever needs to be repaired. The included spray nozzle is our popular WNSl0 model with a soft rubber comfort grip and impact-resistant rubber tip to protect surfaces from drop damage. Features: Lightweight and strong 600 PSI durable hose Field serviceable fittings Rubber Tip Nozzle included

Read more less

Blue Hose with Flex Relief - 25'HoseCoil 25' HP Self Coiling Hose with Flex Relief are lightweight, self-coling hoses. The hoses are built with standard 3/4" field serviceable soild brass fittings, and HoseCoil's newly upgraded (HP) high performance Polyether material. A HoseCoil hose is the the perfect solution for using and storing a hose.Features: Polyurethane Light Weight - Easy to use Self Coiling - Easy to stow 85-90% Usable Length - Excellent extendibility Solid Brass/Stainless Steel Connectors - Improved flow rate and rust free use 360 Gallons per Hour Flow Rate High Quality Brass or Stainless Steel Fittings *Replaces the HS2500U Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 6"W x 21"L WT: 1.9 lbs UPC: 659988107579

Read more less

Commercial Pilot PRO 25' Hose Kit with Boat Bumper Metal Body NozzleThis kit includes a 25' black PRO Series Coiled hose, Boat Bumper Metal Body Nozzle, and a brass swivel with quick release.20' PRO Series Coiled Hose:This PRO Series hose is tough and rugged, made from top-of-the-line High Performance Polyether material for optimal durability and UV stability in a marine environment. It features a 4.75" coil and dual strain reliefs to reduce kinking, and the 1/2" ID (inner diameter) of the hose provides a 30% increase in flow rate over 3/8" ID hoses. The PRO Series is not only larger in diameter, but also features a thicker hose wall for added strength and durability. Built with 3/4" garden style brass fittings, it fits all standard US hose connections, with a field-serviceable design for easy hose repairs using common hand tools.Boat Bumper Metal Body Nozzle:The Boat Bumper Metal Body Nozzle is designed with a big rubber tip that protects gelcoat and other boat surfaces from drop damage. Its adjustable spray pattern ranges from a wide-angle rinse to a focused stream for tackling stubborn debris. The strong metal body construction, solid brass spray mechanism, and stainless steel components combine to ensure long-lasting performance and precise flow control.Quick Release & Swivel Fitting:The brass swivel keeps the spray nozzle properly aligned when attached to the rigid coiled hose and features a quick release for easy removal. Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 7"W x 16"L WT: 3.6 lbs UPC: 659988124729

Read more less

True North Deluxe 9206 120VAC High-Performance Space Heater - 600W, 900W & 1500W600, 900, and 1500 watt electric space heater. Rugged, steel body construction. Dual overheat protection.This rugged AC electric heater keeps the cabin warm on the chilliest of those early and late season nights in the marina. The model 9206 True North AC heater was recognized by Powerboat Reports as being the best. There is no other heater on the market that delivers the performance and quality of the True North.Features: Steel construction 3 heat settings (600, 900, and 1500 Watt) Option of a 'fan only' setting Built-in thermostat Anti-freeze setting Low profile design Made in Canada 5-year warranty Benefits: Years of trouble-free use Extended boating season Greater on-board comfort Can use for 'no heat' air circulation Eliminate snow or frost build up on boat top Cannot tip over Easy to stow when not in use Owner's Manual (pdf)Brochure (pdf)

Read more less

Universal Flush Mount Frame for NRX130S Compressor Refrigerators - Stainless SteelA universal stainless steel flush mount installation frame for the Dometic NRX 130S fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 26"W x 35"L WT: 9.2 lbs UPC: 808282390006

Read more less

Horizontal Round Rail Mount with Knob - 1-1/2"Magma's horizontal round rail mount with the knob replacement part.Specifications: Mount: 1-1/2" Weight: 0.93lbs/0.43kg Exterior Construction Materials: 18-8 Stainless Steel and 356 Anodized Aluminum Warranty: 1 Year

Read more less

Piezo Igniter and Ceramic Electrode with Wire & Fasteners Replacement igniter and electrode.Compatible with: A10-207 A10-217 A10-918  A10-918L A10-918LS  A10-1218L  A10-1218LS A10-1225L  A10-1225LS  *Sold as an Individual 

Read more less

Flush DrinkholderCut-Out: 3-7/8"Outer Diameter: 4-3/8"Depth: 2-1/4" - 3-1/8"Material: 304 Stainless Steel Includes mounting gasket, pad & 3/8" drain tube Fits cans, bottles & can coolers

Read more less

Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Read more less

Inboard/Outboard Rail MountThe Kuuma Grill Rail Mount is ideal for using your Kuuma grill aboard your boat by mounting it on any cockpit rail. This mount allows your grill to hang outside the rail to protect fiberglass from spills and splatters.Compatible With:Any Kuuma grillFeatures: Can be used on 7/8" - 1-1/4" round horizontal railings or on 1-1/4" square railings All installation hardware included Made of rust-resistant anodized aluminum Dimensions (L x W x H) - 9" x 2" x 2.5" *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - GreyCamco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Read more less

Single Cell Phone Dash Pocket - Strom Grey/BlackThe SeaDek Cell Phone Dash Pocket features a cut-out size pocket to fit most cell phones.Features: Keeps phones and other small items stored safely Adheres directly to the dashboard Specifications: Color: Storm Grey/Black Overall Dimensions: 6.9″ x 9.9″ Pocket Dimensions: 4.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

PRO 25' with Dual Flex Relief 1/2" ID HP Quality HoseThe 1/2” ID HoseCoil PRO provides a 47% increase in flow rate over 3/8” ID. HoseCoil PRO features a large 4.75” coil for better ease of handling and dual strain reliefs to reduce kinking. The HoseCoil PRO is not only larger in size, it is made with much thicker material for added strength and durability. Built with 3/4” garden style fittings, it fits all standard US hose connections. Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 5"W x 16"L WT: 2.45 lbs UPC: 659988120288

Read more less

Single Stage Regulator with 300 PSI Gauge & 20" Pigtail with Wall MountA single-port, single-stage, remote-mounted regulator. It comes complete with a pressure gauge, mounting brackets, and a 20" POL pigtail hose.Specifications: Die-cast zinc body 3/8" FPT outlet 20" POL pigtail hose included Dimensions: 6 1/2" H x 3 1/4" W x 3 1/4" D UL-listed

Read more less

22lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC ApprovedThis composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.Features: Non-corrosive 3-layer fiberglass composite cylindrical Ergonomic collar for a nice look The handle makes it easier to carry Type 1 valve Frequent Questions:Where can they be refilled?These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station.How safe are these cylinders?These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.”When do they need to be recertified?Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here.How long is the useful life of the cylinder?Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC.Will cylinders work in cold climates?The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix.Will the cylinders work in warm climates?The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

40" x 80" 6mm Teak Full Sheet - Brushed Texture - Storm Grey/Dark Grey (1016mm x 2032mm x 6mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet has a modern brushed texture and non-skid qualities for optimal comfort.Features:2.5″ Teak line spacingSpecifications: Color: Storm grey/dark grey Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed

Read more less

Mako Logo Helm Pad - White/Storm Grey EmbossedThe Mako Boat Helm Pad is a large, 16″ x 39″ white over storm gray anti-fatigue pad with a routed Mako logo.SeaDek Helm Pads provide the utmost comfort while standing for long hours on the water. Made from closed-cell PE/EVA blended foam material, this soft yet durable pad features .8" foam that absorbs impact and a brushed surface with exceptional non-skid characteristics to provide safety and stability. The Mako Helm Station Pad is backed with our 3M pressure-sensitive adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Storm Grey with logo Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Dek Magic 32oz Spray Cleaner for SeaDek *Case of 12*Dek Magic is formulated specifically for SeaDek. Removes fish blood, grease, oil, wine, and more. These 32 oz bottles are perfect for fighting those tough stains.Features: Environmentally friendly Formulated specifically for SeaDek Tackles tough stains Removes fish blood, grease, oil, wine, and more Specifications:Size: 32oz bottle*Sold as a pack of 12

Read more less

Embossed 4-Piece Step Kit - Snow CamoGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material. Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry.  Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.Technical Specifications: Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2" Color - Snow Camo Material - Closed PE/EVA cell foam *Sold as an Individual

Read more less

Large Realtree Helm Pad - Storm Grey/Black Timber Pattern The softest, most comfortable SeaDek pad with a laser-etched Realtree camo pattern.  Your knees and back will thank you after a day on our Dual Density Realtree helm pad.  Featuring an ultra-comfortable low-density .7" foundation with our legendary standard .1" top layer for traction and durability.  All helm pads utilize a robust 3M™ adhesive for an easy peel-and-stick application. Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Storm Grey/Black Timber Pattern  Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Large Helm Pad - Caribbean Blue/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Caribbean Blue/Storm Grey Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Sirocco II 3-Speed 7" Gimbal Fan - Black - 12-24V The Sirocco II Fan offers increased durability, combined 12 and 24-volt capability, improved user interface, and increased timer settings. The Sirocco II is truly the next step in cabin comfort,The best cabin fan available in the marine market! The model 7010 Sirocco II 12-24 Volt fan features a unique gimbaled design that allows airflow to be directed in any direction of the cabin - 360°. The Sirocco II can also be folded flat and out of the way against the bulkhead when not in use. With its multiple speeds, timer settings, and quiet operation there is no other marine fan that can match the Sirocco II's performance. It truly is the premium choice for comfortable cabins and salons.Features: Unique gimbaled design Three-speed push-button control Ultra-quiet, long-life motor Increased durability Combined 12 and 24 Volt autosensing Improved user interface Four preset timer settings (3, 6, 9, or 12 hours) Timer indicator lights and automatic dimming Stylish design available in a black or white finish Benefits: Allows full 360° rotation for limitless positioning Quiet, comfortable cabins Efficient use of space Battery-friendly Matches any boat interior Easy to install Same mounting footprint as Sirocco Made in Canada

Read more less

Fillet Table Only - 30" Features: UV stabilized high-density polypropylene Solid one-piece construction for long life and easy maintenance Large, 30" wide by 12-5/8" deep, includes hose holder and towel bar Easily accessible knife and pliers holders Knives and pliers not included DOES NOT INCLUDE MOUNTING HARDWARE WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 33"L WT: 7.25 lbs UPC: 035514326810

Read more less

Marine Kettle® On-Shore Stand Larger and more stable than the original.  Cook on-shore or any flat surface with this 18-8 stainless steel and brass grill stand.  It easily collapses for flat compact storage without tools.  Compatible With:All model Marine Kettle® grills*Sold as an Individual  Quick Guide (pdf)

Read more less

Teak Drinkholder with Removable Cockpit Table Top - Holds 4 GlassesFeatures: Table Top Dimensions: 16" x 24" Drinkholder holds four glasses Can be used without table Fits all 7/8" or 1" diameter tubing pedestal steering guards Easily removed

Read more less

Non-Tipping 10oz Rocks Tumbler - WhiteJust add your favorite cocktail to the Toadfish Rocks tumbler and keep your drink accident-free and always chilled. Includes built-in graduated measurements for the perfect pour and a shatter-proof lid with a removable slider. This is your new go-to companion from bourbon to coffee. The Toadfish Rocks Tumblers hold on when others can't.Toadfish Model Number: TF10OZROCKS-WHITE Features: Color: White SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift. Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip. Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant.  Graduated Measurements - Built-in graduated measurements so you get a perfect size to pour every time.  Shatterproof Lid - Durable lid with an easy-slide tab will keep your drink safe and easy to sip. How to Use:  To use simply place the Rocks Tumbler on any smooth surface and it will keep your drink in place (securely up-right). To remove, lift directly up.

Read more less