Vertical Bunk Bracket Dimpled - 7-1/2"Adjustable bunk bracket. Used when mounting bunks on edge. Ideal for small craft trailers. A single bracket will allow the bunk board to pivot with the hull as the boat is loaded. Double brackets hold the board in place.Features: 7-1/2" Slot 7/16" x 4-3/8" 11 gauge materical, galvanized finish Dimpled style

Read more less

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2" bunk flange hole centers & 1 hole centered 10 gauge material *Sold as kit with (2) brackets, (2) 7/16" x 1" head cap screws, and (2) 7/16" nylon lock nuts.

Read more less

Bolt-On Fender Step Pad - 3" Left Hand/Right HandThis fender step pad is ideal for the do-it-yourselfer. Step pad can be welded or bolted to your trailer fender. Step pad can also be bolted to your trailer frame with u-bolts. U-bolts NOT included.Features: Galvanized Finish 12 Gauge Steel 1-3/16"H x 3"W x 15-1/4"L Left Hand/Right hand

Read more less

5' Roller BunkRoller bunks make loading and unloading small craft at very short or even dry ramps easy. Great for ramps where it is not practical to float the boat onto the trailer. Pre-assembled and pre-drilled for easy installation. May be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards.Features: Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel Supports up to 1500lbs of well distributed weight Mounting hardware not included Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bow Roller - Yellow PVC - 3" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket. Features: Yellow PVC 3" x 1/2" ID

Read more less

Center Swivel Bracket - 2"Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2" bunk flange hole centers 11 gauge material Sold individually

Read more less

ScuffBuster™ Standard - 5.75" x 4.5" - Solid Bowguard - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 8"L WT: 0.3 lbs UPC: 672057026373 Brochure (pdf)

Read more less

Bunk CarpetingFeatures: Bunk Carpeting 12" x 144" Black Limited 5-Year Warranty WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Vertical 90° Bunk Bracket - 5" x 8" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

4" Bow Bell Roller Assembly - Black TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Black TPR 5-1/2" diameter 8" Wide 1/2" shaft Fits 4" wide center roller bracket

Read more less

Flex Keel Pad - Full Cap Style - 12" x 3" - GoldThese Thermal Plastic Rubber (TPR) pads cushion the trailer cross members to protect your boat keel. Full cap style mounts on the center of any 3" wide cross member or axle that the keel might hit.Features: Yellow TPR 3" W x 12" L 5/16" thick 3/4" deep sides for mounting Mount using four rivets or screws, two through each side (hardware not included).

Read more less

Stake PocketThe easiest and most secure way to add removeable sides to a trailer. Sized to receive standard 2" x 4" studs.Features: Bolts onto trailer 11 gauge Hot dipped galvanized 3/8" holes for bolting to frame Center hole for an optional locking bolt Dimensions: 2-1/2" x 1-1/2" x 3-1/2"

Read more less

Heavy Duty Spare Tire Carrier27310GGet that spare tire out of your way, mount it up on its side and it looks great too. Hot dipped galvanized for lasting protection. Holds either 4 or 5 lug wheels and fits all trailers frames up to 3" wide by 4" high. Extra heavy duty welded steel construction for worry free trailering. Offset height raises tire and provides additional ground clearance.WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pontoon Bolster Bracket - 15-3/4" x 2"Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.

Read more less

Panel Bracket Assembly 12" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 10" on center

Read more less

1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" TongueProduct DescriptionThis roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4", black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue. 2 to 2-1/2" trailer tongue.Features: Spool roller supports your boat's keel as it sits on the trailer Prevents the bow from making contact with your winch Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer Requires 7/16" fasteners (not included) Sturdy, 1/8" galvanized steel bracket resists corrosion Black rubber roller delivers long-lasting performance Made in USA Specifications: Roller length: 4" Shaft diameter: 5/8" Diameter of mounting holes (each): 7/16" Spacing of mounting holes: 3" apart on center Typically installed flat on the tongue of a boat trailer, this spool roller bracket assembly stabilizes the keel of the boat during trailering.

Read more less

Double Slot Swivel Bolster Bracket Assembly - 12"C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G.Features: Bolster bracket: 12" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 4-3/4" Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2" Overall assembly length is 12"

Read more less

Bow Roller - Black - 3" Diameter - 3-1/8"W - 1/2" IDBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features: Black natural rubber 3" Diameter 3-1/8" wide 1/2" shaft

Read more less

Vertical 90° Bunk Bracket - 5" x 10" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

Hi-Mount Spare Tire CarrierFeatures: Spare Tire Carrier Hi-Mount Bolt-On Limited 5-Year Warranty WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

ScuffBuster™ XL with Notch - 9" x 8.75" - Notched - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 11"W x 11"L WT: 0.7 lbs UPC: 672057806388 Brochure (pdf)

Read more less

FlexStep® Pro Package - AluminumThe Adjustable & Removable Trailer Step - Make Boating Easier & More ConvenientMegaware FlexStep® Pro is an innovative multi-angle/extendable step system that attaches to your trailer frame, allowing easy access to virtually anywhere on your boat.Megaware EngineeringThe Megaware FlexStep® Pro makes boating more convenient than ever. This innovative multi-angle/extendable step system attaches to your trailer frame, allowing easy access to virtually anywhere on your boat. A quick, spring loaded pull handle and locking pin system adjusts the Megaware FlexStep® Pro to 16 positions for maximum reach.Megaware FlexStep® Pro is manufactured from lightweight, high tensile 6063-T6 anodized aluminum ensuring the highest quality. Each step safely holds up to 300 lbs.Using just four bolts, the Megaware FlexStep® Pro mounts to your trailer frame (2-3" deep by up to 4" wide*) in just minutes and easily disconnects with a single pin for safe storage during travel.*Larger trailer frames may be accommodated by purchasing longer bolts available at any hardware store.Features: 16 Adjustable Positions Extends from 17 to 21 Inches Removable for Safe Travel and Stowing Fits Most Trailer Rails Brochure (pdf)

Read more less

Spool Roller 5" - 5/8" ID - Gold TPR with Bushing White SolidFeatures: Fits standard brackets and shaft sizes Natural rubber 2-7/8" Diameter 4-7/8" Width Gold TPR 5/8" Shaft

Read more less

Vertical 90° Bunk Bracket - 5" x 6" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

3" Bow Bell Roller Assembly - Blue TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Blue TPR 4-1/2" diameter 6" Wide 1/2" shaft Fits 3" wide center roller bracket

Read more less

Spare Tire Carrier - w/Lug Nuts27206A Length: 12"Specially shaped 7/16" U-Bolt fits under trailer tongues up to 3" wide to secure a spare tire securely on top of the tongue. For all 4 and 5 lug spare wheels from 8" to 14" and most 15" wheels.WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Tail Light ProtectorAdded protection for fragile trailer tail lights. Mounts between the existing tail light mounting brackets and the lamp using the two lamp mounting studs. Mounting holes fit standard DOT brake/tail lamps. No hardware required for installation. Aluminum tread 0.080" thick

Read more less

Heavy Duty Spare Tire Cover27410Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.Tire Size: 12"Diameter:21"Depth:6-1/2"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

ScuffBuster™ XL - 9" x 8.75" - Solid - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 11"W x 11"L WT: 0.75 lbs UPC: 672057806371 Brochure (pdf)

Read more less

ScuffBuster™ Standard with Notch - 5.75" x 4.5" - Notched Bowguard - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 8"L WT: 0.25 lbs UPC: 672057026380 Brochure (pdf)

Read more less

4' Roller BunkRoller bunks make loading and unloading small craft at very short or even dry rams easy. Great for ramps where it is not practical to float the boat onto the trailer. Pre-assembled and pre-drilled for easy installation. Maybe be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards.Features: Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel Supports up to 1500lbs of well distributed weight Mounting hardware not included Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bow Roller - Yellow PVC - 4" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket.

Read more less

3" Bow Bell Roller Assembly - Black TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Black TPR 4-1/2" diameter 6" Wide 1/2" shaft Fits 3" wide center roller bracket

Read more less

Fold-Away Bolt-On Hinge KitFeatures: Hinge Kit 2" x 3" Trailer Beam Z-Max 600 Zinc Finish Raing 5,000 lbs. 48" Pivot Limited 5-Year Warranty WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Center Swivel Bracket - 2-1/2"Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets. Features: Bolt-on installation Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2" bunk flange hole centers 11 gauge galvanized steel Made in the USA Sold individually

Read more less

Panel Bracket Assembly 5" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center.

Read more less

Wobble Roller Retainer Ring - Zinc PlatedUsed by many trailer manufacturers to secure wobble rollers onto their individual shafts. Zinc plated. Two retainer rings and two 1-1/8" washers per blister package.

Read more less

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 4" L *Comes packaged with nuts and washers.

Read more less

5" Adjustable Keel Roller Assembly f/3" Tongue - BlackProduct DescriptionAdjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Features: Fits 3" tongue width 5" black rubber roller Includes pair of 3/8" bolts

Read more less

Ribbed Roller 4 Pack - Gold Replace your ribbed wobble rollers with this thermal-plasticized rubber ribbed roller kit Rollers fit 1-1/8" shaft Kit includes four 5" x 3" ribbed rollers with polypropylene hub, four Delrin bushings for 3/4" shaft, for 1-1/8" washers, four 3/4" washers and four retainer rings

Read more less

Fold-Away Bolt-On Hinge KitFeatures: Hinge Kit 3" x 3" Trailer Beam Z-Max 600 Zinc Finish Rating 5,000 lbs. 48" Pivot Limited 5-Year Warranty WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Roller Bunk Mounting Bracket - 11"Perfect for use under roller bunks when the bunks need to be raised up off the frame.  Adjustable 11 ga top swivel bracket allows bunks to tilt to the shape of the hull. Features: 11” tall 1/2” swivel bolt included 7/16” hole for mounting to roller bunks

Read more less

Flex Keel Pad - Edge Cover Style - 10" x 1-1/2" - BlackThese black poly pads cushion the trailer cross members to protect your boat keel. Edge cover style mounts on the trailing edge of any width cross member or axle.Features: Black poly material 10" L x 1-1/2" W 3/8" thick 4-1/2" hole centers Mount using two rivets or screws through the top (hardware not included).

Read more less

Roller Shaft 5/8" x 13" with Cap NutsReplacement Roller shaft and cap nuts.Features: 5/8" diameter x 13" long Zinc Plated Comes with two 5/8" cap nuts

Read more less

Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 6-1/4" Max Grip: 5.690"

Read more less

3" Bow Bell Roller Assembly - Yellow TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Yellow TPR 4-1/2" diameter 6" Wide 1/2" shaft Fits 3" wide center roller bracket

Read more less

Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 3" L *Comes packaged with nuts and washers.

Read more less

Poly 2' Trailer Glyde Slicks 6-PackPart #: P05-06W Launch & load your boat with ease Eliminates friction between the bottom of the boat & the runners Easily installed on carpeted or bare bunks Evenly distribute the weight of the boat For all boats: aluminum, fiberglass & wood Includes stainless steel screws & instructions Dimensions: 2'L x 1-1/2"W - 7/16"ThickThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less