Flipper Manual Galley Hand Operated PumpWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.Self priming Lever operated hand pump.Features Ideal for installing between two sinks- swivelling outlet Fine flow control Easy operation - Light back & forth pump action Suitable for fresh water and saltwater 7 ltrs capacity (1.85 US gals) per minute WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1.85 GPM Box Dimensions: 3"H x 7"W x 10"L WT: 0.6 lbs UPC: 766478041807

Read more less

Wash Down Flexible Hose - 25'Features: Expandable X-hose flexible hose Easy to use, portable, folds up after use, easy to stow away Handles wash down pump pressure Size: 25' Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 9"W x 12"L WT: 0.7 lbs UPC: 729321218887

Read more less

Par-Max HD5 Heavy Duty Water Pressure Pump - 12V - 5 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 5 GPM Box Dimensions: 5"H x 6"W x 18"L WT: 8.4 lbs UPC: 671880841948 Brochure (pdf)

Read more less

HotShot HD4 Heavy Duty Washdown Pump - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Max PSI: 60 Volts: 12v Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 8"W x 17"L WT: 8.8 lbs UPC: 671880841917 Brochure (pdf)

Read more less

Gusher Foot Operated Galley Pump Left Handed LeverWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce. The simple solution for fresh water dellivery in small galleys.Features Smooth double action Self primes and operates dry without damage Easy, smooth hands free operation Ease of installation- Multi-directional inlet and outlet hose connections 3 mounting options (including thru bulkhead) Left and right oriented foot lever versions available Also ideally used to prime Whale In-Line Booster pumps Pumps fresh and salt water 15 ltrs (4 US gals) per minute WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 7"W x 10"L WT: 2 lbs UPC: 766478055101

Read more less

Low Pressure Cyclone Centrifugal Pump - 12VSilent running. Single tool servicing. 2m (6 foot) suction lift when wet.A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 9 Amp Fuse Size: 10 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 29.7 GPM Max PSI: 8.7 Volts: 12v Box Dimensions: 6"H x 6"W x 12"L WT: 6.9 lbs UPC: 671880579377 Owner's Manual (pdf)

Read more less

Low Pressure Cyclone Centrifugal Pump - 24VSilent running. Single tool servicing. 2m (6 foot) suction lift when wet.A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 4.5 Amp Fuse Size: 7 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 29.7 GPM Max PSI: 8.7 Volts: 24v Box Dimensions: 6"H x 6"W x 12"L WT: 7.2 lbs UPC: 671880579384 Owner's Manual (pdf)

Read more less

Mag Drive Centrifugal Pump - 11GPM - 110V ACDesigned for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.Pump Head is manufactured in chemical resistant thermo-plastics - entirely non-metallic.UL listed, ignition and thermally protected fan cooled motor.Features: 11.35 GPM open Flow 110V AC 60Hz 1/2" NPT ports for easy connection 18 foot head WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 110v Gallons Per Minute: 11 GPM Box Dimensions: 8"H x 10"W x 11"L WT: 6.8 lbs UPC: 671880623148 Quick Guide (pdf)

Read more less

Par-Max HD5 Heavy Duty Water Pressure Pump - 12V - 5 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 8.4 lbs UPC: 671880841955 Brochure (pdf)

Read more less

IC Retail Kit 12V Gulper IC Pump & Strainer ICAt the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance.Features & Benefits Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically Pre-wired and assembled - just connect power Remote mounted pump for easy inspection- high,dry and protected Soft start - protects the pump for long life Small footprint strainer fits into very confined bilge spaces Low current controlled switching - no switch failure from high currents On/off delay - prevents cycling Environmentally friendly - no mercury Time delay to allow for optimum drainage Override wire included to allow for manual activation Non-choke valves - no filter to block/clean Long life - pump self primes and runs dry without damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Volts: 12v Box Dimensions: 7"H x 8"W x 12"L WT: 5.2 lbs UPC: 766478945693

Read more less

CM90 Circulation Pump - 23.7GPM - 12V - 1-½" OutletA line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation.System Pressure: -0.3 to +3.0 bar; stationary max. 4.0 barLiquid: water/glycol mixture; max. 60% glycol, fresh and salt waterMotor Service Life: More than 5,000 hours at nominal voltage 10,000 start/stops. Interchangeable motor.Motor, Voltage: Nominal 13.6V DC for use between 10-16V Nominal 27.2V DC for use between 20-32VInput Power: Max. 125WDry Running: 30 minutesDimensions: 244mm (L) x 120mm (W) x 150mm (H)Ports:Ø 20mm (3/4") & Ø 38mm (1-1/2")Weight: 3.0kg (6.6lbs)Body: PPA, glass-fiber reinforcedMounting: Separate universal bracket for flat surfaces Specifications: Gallons Per Minute: 23.7 GPM Volts: 12v Box Dimensions: 5"H x 7"W x 11"L WT: 6.6 lbs UPC: 7330717012915

Read more less

Aqua Jet Wash Down PumpsThe new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.CE-ApprovedFeatures: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:20 l/min - 5.2 GPM Pressure Cut Off: 5 bar - 70 psi Fuse Size: 20 A Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb, Motor: WD 5.2 - 185 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene Specifications: Gallons Per Minute: 5.2 GPM Max PSI: 70 Volts: 12v Box Dimensions: 6"H x 7"W x 11"L WT: 7.3 lbs UPC: 729321406079 Owner's Manual (pdf)

Read more less

Babyfoot Manual Galley Foot Operated PumpWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.Self-priming foot pump designed for easy installation and use.Features Simple foot operated solution for pumping water in the galley Smooth and easy operation Comfortable to use - angled top section Compact for installing in confined spaces Ideal as a priming pump for use with Whale in line impeller electric pumps The ideal foot pump for a simple freshwater system WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2.2 GPM Box Dimensions: 3"H x 5"W x 7"L WT: 0.6 lbs UPC: 766478461803

Read more less

AQUA KING™ II Supreme Fresh Water Pump - 12 VDC - 5.0 GPMSHURFLO's AQUA KING II fresh water pump is designed for boats with multi-fixtures providing "Just like home" shower pressure, and can operate at lower flow conditions with low cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With a heavy duty motor built to withstand the tough marine environment, this motor features an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING II fresh water pump can run dry without damage. Inlet strainer and 1/2" hose barb fittings are included. Ignition protected. Thermally protected.Features: 5901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 55 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 7.8 lbs UPC: 752324011865

Read more less

AQUA KING™ II Standard Fresh Water Pump - 12 VDC, 3.0 GPMSHURFLO's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected and can run dry without damage.Features: 3901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 55 Gallons Per Minute: 3 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 4.9 lbs UPC: 752324012381

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 12V - 4 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 7.85 lbs UPC: 671880841870 Brochure (pdf)

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4 GPM Max PSI: 60 Volts: 24v Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs UPC: 671880841900 Brochure (pdf)

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 12V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 4 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 7.85 lbs UPC: 671880841863 Brochure (pdf)

Read more less

Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 3 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs UPC: 671880841801 Brochure (pdf)

Read more less

Stainless Steel Quick-Release Hose Deck Mount Fitting & Hose AdapterStainless Steel Deck Mount Fitting, 1/2" NPT Female Inlet, 3/4" GHT Male Hose Adapter.The Quick Release Connector provides the perfect installation solution for your HoseCoil washdown or garden style hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again! This clever design will allow you to flush mount the Quick Release into your cockpit or bulkhead.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 8"W x 8"L WT: 1.4 lbs UPC: 671880550239 Brochure (pdf)

Read more less

Spray NozzleFeatures: Aqua Jet Spray Pistol Replacement Compatible with either the 3.5 or the 5.2 Wash Down Pump Kits Constructed out of heavy duty plastic Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 7"W x 7"L WT: 0.3 lbs UPC: 729321913034

Read more less

High Flow Dual Pump System - 12 VDC - 10.0 GPMThe most advanced system available. This fully-automatic, quiet unit delivers water smoothly and consistently.Features: Replaces 5907 System Delivers up to 10 GPM at Open Flow Includes the AQUA KING II Supreme 5.0 Pump and PRO BLASTER II Ultimate 5.0 Pump 12 VDC 55 PSI Shut-off Pressure Built to Withstand the Harsh Marine Environment with Electro-Coated Motor, O-ring Seals and Fully-Sealed Wire Entries This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 55 Gallons Per Minute: 10 GPM Box Dimensions: 7"H x 7"W x 24"L WT: 17.8 lbs

Read more less

Wash Down Control - 12V - 2-Way On/OffSwitch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matt black finish has an integrated fuse holder and operating light. Fuses are not included.Features: Enables automatic bilge pumping Matte black finish 12-Volt 2-way on off controls Fuses not included

Read more less

PRO BLASTER™ II Washdown Pump Ultimate - 12 VDC - 5.0 GPMSHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provide a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.Features: 5901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 8.25 lbs UPC: 752324011926

Read more less

Marine Air Conditioning Self-Priming Circulation Pump - 115VAC, 4.5GPM, 50PSI Bypass, Run-Dry Capable EDM ValvesShurflo will keep your air conditioning running. Air locking often occurs when you lower your boat into the water. Pentair Shurflo Self-priming Circulation Pumps help prevent air locking and keep your air conditioning system up and running. Compatible with all types of boats that are trailerable or not constantly in the water.Specifications: 4.5 GPM 115V Self-priming 50 psi bypass EPDM valves Benefits: Designed with automatic demand Operates quietly Includes thermal protection Can run dry without damage Mounts in any position Recommended Accessories for 5/8" Hose: One inlet strainer 255-215 Two 5/8" hose barb swivel elbows 244-3936 One 5/8" straight 244-2936 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 115v Gallons Per Minute: 4.5 GPM Sea Water Flow Rate: 4.5 GPM Voltage - Input Range (Volts): 115v Box Dimensions: 6"H x 6"W x 12"L WT: 7.6 lbs UPC: 752324329823 Brochure (pdf)

Read more less

Pre-Pressurized Accumulator Tank - 24 oz.Specifically designed to be installed downstream of your pump, this tank helps reduce unwanted cycling, pulsation and pressure spikes, while helping to prolong pump life and save battery power. SHURFLO's accumulator tank uses a patented domed displacement diaphragm to minimize noise and power usage. This 24 oz. accumulator tank accommodates space constraints in your RV.Features: Reduces Pump Cycling Smooths Water Faucet Pulses Pre-Pressurized to 30 PSI with Built-In Diaphragm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Max PSI: 125 Type: Accumulator/Pressure Tanks Box Dimensions: 5"H x 6"W x 11"L WT: 1.35 lbs UPC: 752324009626

Read more less

BLASTER™ II Washdown Pump - 12 VDC - 3.5 GPMSHURFLO's new 4238 series wash down pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all deck wash down plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the BLASTER II Series pumps are designed for the toughest marine wash down applications. SHURFLO's quality reputation has been built on the reliability and dependability of every pump we build. The BLASTER II Series wash down automatic demand pumps are thermally protected and can run dry without damage. Fittings and nozzle included. Ignition protected.Features: 3901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Max PSI: 45 Volts: 12v Gallons Per Minute: 3.5 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 6.1 lbs UPC: 752324012404

Read more less

HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 8"W x 18"L WT: 10 lbs UPC: 671880842006 Brochure (pdf)

Read more less

Sensor Max II 5 GPM Variable Speed Freshwater Pump - 12V, 40 PSIExceptional performance and life for total peace of mind with your onboard water system. The Sensor-Max II is the most sophisticated freshwater delivery pump featuring variable speed technology. The Sensor-Max II incorporates a high-performance five-chamber design with an advanced pressure sensor and variable speed programming that automatically adjusts the motor speed to deliver the right flow and pressure the water system requires. The result is an extremely quiet pump operating smoothly in the background for a truly exceptional onboard experience for total peace of mind while at sea. Features: Quiet operation with no water hammer Consistent pressure and smooth, steady flow Eliminates the need for an accumulator tank High flow capacity, supplies up to five outlets Conserves power by adjusting motor speed as needed Robust co-molded diaphragm and cast aluminum lower housing for long life Quick Guide (pdf)

Read more less

3700 GPH General Purpose End Suction Centrifugal Pump - 24VThe Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 24 volts DC. Features: 3700-GPH 24-Volt White/Red 3-Year Warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Aqua Jet Duo WPS 10.4 Gallons - 24V Water Pressure Pump SystemHigh capacity unit with two parallel connected Aqua Jet WPS capacity 40 l/min fixed on a base with PUM Protector inlet strainers and a 2 liters pre-pressurized accumulator tank. Quiet and pulsation free even at low speeds, the Aqua Jet five chamber diaphragm pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sounds levels in relation to water flow are placed at a premium - such as in shower and galley applications. Operates in fresh or sea water. Self priming. Aqua Jet units have PP/PPA body, EPDM valves and santoprene diaphragm. Capacity: 10.4 GPM/Pressure Cut-Off: 41 psi/Fuse Size: 25 Amp/Connection: 3/4" hose. Features: Two parallel-connected Aqua Jet WPS fixed on a base with PUM Protector inlet strainers and 2 liters pre-pressurized accumulator tank 5-chamber Aqua Jet WPS pumps provide a reliable "heart" for small boat and RV water pressure systems Lower noise and water pulsation 10.4 GPM Capacity

Read more less

General Purpose Pump FIP F4 - 24V - 12 GPMDC 24V F4 size FIP pump with capacity 45 L/min (12 GMP). Used for pumping water, oils and chemicals.Features: Pump body in brass, stainless steel shaft and high quality impeller Reversible flow direction Self priming up to 5m vertical lift Interchangeable with Johnson Pump 10-24689-02 Specifications: Weight: 1 kg/2 lbs Dimensions: 180/7L x 90/3.5H x 120/4.7W mm/in  Port Connections: 19mm (1/2″)Type: Reversible flow direction by changing polarity Fuse: 6A *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Gallons Per Minute: 12 GPM Volts: 24v Box Dimensions: 4"H x 5"W x 8"L WT: 6.3 lbs UPC: 7340176600943

Read more less

Water Pressure Pump - 12V - 5.3 GPMPremium water pressure pump 12V with capacity 20l/min (5,3GPM). For continous supply of pressurized water on demand. Cut off pressure 2,8 bar (40 psi).Features: Extra heavy duty sealed pressure switch, smooth and pulsation free flow, very quiet operation  Serve up to 5 outlets Easy to install with quick connect ports for 1/2″ or 3/4″ hose  Inlet strainer 40 mesh included Specifications:Fuse Size: 15A Specifications: Volts: 12v Gallons Per Minute: 5.3 GPM Box Dimensions: 4"H x 7"W x 11"L WT: 6.05 lbs UPC: 7340176600578 Brochure (pdf)

Read more less

General Purpose Pump FIP F4 (12 GPM) - 12VDC 12V F4 size FIP pump with capacity 45 L/min (12 GMP). Used for pumping water, oils and chemicals.Features: Pump body in brass, stainless steel shaft and high quality impeller Self priming up to 5m vertical lift Reversible flow direction by changing polarity Interchangeable with Johnson Pump 10-24689-01 Specifications: Weight: 1 lg/2 lbs Dimensions: 180/7L x 90/3.5H x 120/4.7W mm/in  Port Connections: 19mm (1/2″) Fuse: 12,5A  *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Gallons Per Minute: 12 GPM Volts: 12v Box Dimensions: 4"H x 5"W x 8"L WT: 6.45 lbs UPC: 7340176600936

Read more less

Blaster II Washdown Pump - 24 VDC - 3.5 GPM - 45 PSIThe Shurflo Blaster II Washdown Pump design was created with a unique over-molded single-piece diaphragm, ensuring long life and top performance in all marine washdown applications.Features: Thermally protected and can run dry without damage Sealed switch Ignition Protected 2 each 3/4" hose barb fittings, 1 each 3/4" GHT (M) fitting Nozzle included (aftermarket models only) Specifications: Dimensions: 9" x 4.9" x 4.1" (229 x 124 x 104 mm) Voltage: 24 DC Flow Rate: 3.5 GPM (13.2 LPM) Amps (Max): 3.5 Shut-Off Pressure: 45 PSI (3.1 Bar) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 3.5 GPM Max PSI: 45 Volts: 12v Box Dimensions: 5"H x 6"W x 11"L WT: 6 lbs UPC: 752324012411 Quick Guide (pdf)

Read more less

5.5 GPM Water Pump - 12VThe 5.5 GPM 12V High-Powered Multi-Use Water Pump delivers exceptional performance and versatility, making it the perfect solution for freshwater supply, washdowns, livewell circulation, and water transfer. Built with a powerful five-chamber diaphragm, this heavy-duty pump ensures high water flow while reducing cycling for smooth and consistent operation. With a shut-off pressure of 60 PSI, it provides precise pressure control for multiple fixtures operating simultaneously.Designed for durability and reliability, the 55-Series pump features waterproof sealing, run-dry capability, and excellent heat dissipation, ensuring extended pump life and quiet operation. Its compact, efficient design makes it ideal for marine, RV, and industrial applications, offering flexibility without sacrificing performance. Backed by a 4-year warranty and compliant with RoHS, SGS, and ISO standards, this pump guarantees superior quality and peace of mind.Features:  High-Flow Performance: The five-chamber diaphragm design delivers up to 5.5 GPM with reduced cycling, ensuring a smooth, powerful water flow for up to 5 fixtures simultaneously. Precision Pressure Control: Shut-off pressure of 60 PSI provides stable and predictable performance, perfect for high-demand water supply and washdown applications. Run-Dry Capability: Designed to handle dry running under normal workloads without damage, offering enhanced durability and peace of mind during operation. Multi-Purpose Functionality: Ideal for freshwater supply, saltwater washdowns, livewell/baitwell circulation, water transfer, and more – a versatile pump for boats, RVs, and industrial use. Built-In Bypass Function: Reduces rapid cycling and enhances pump efficiency by allowing water to flow back to the inlet side of the pump during bypass mode. Durable and Quiet Operation: Built with waterproof seals, a dustproof motor, and superior heat dissipation, this pump operates quietly and efficiently while extending its lifespan. Easy Installation and Maintenance: Includes 9-inch (22.8 cm) 16 AWG leads for secure wiring and standardized fittings for hassle-free connection to your water system. 4-Year Warranty: Backed by COMMODORE’s 4-year warranty and compliant with RoHS, SGS, and ISO standards, ensuring premium quality and reliable performance.. Specifications: Voltage: 12V Open Flow Rate: 5.5 GPM (Gallons Per Minute) Shut-Off Pressure: 60 PSI (4.2 BAR) Priming Capabilities: 6 feet (1.8 meters) suction lift Max Draw: 15.0A Max Temperature: 140°F (60°C) Ports: 1/2"-14 MNPT Max Recommended Temperature: 140°F (60°C) Unit Weight: 6.08 lbs (2.76 kg) Included Components: Dual-size straight fitting and filter Quick-connect wiring for hassle-free setup Specifications: Gallons Per Minute: 5.5 Volts: 12 Box Dimensions: 6"H x 6"W x 11"L WT: 7.1 lbs UPC: 817683023109 Brochure (pdf)

Read more less

Aqua Jet WPS 4.0 GPM Water Pressure Pump - 24VQuiet and pulsation-free even at low speeds, the Aqua Jet five-chamber diaphragm pump provides the perfect water pressure solution for both small and medium-sized leisure and commercial boats. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are at a premium - such as in shower and galley applications. Operates in fresh or seawater. Self-priming. It is recommended to install a pump with an accumulator tank. Always use a PUM Protector inlet filter before the pump intake. 100-watt motor with PP/PPA body, EPDM valves, and Santoprene diaphragm. 9.46" L x 8.42" W x 4.33" H. Weight: 4.5 lbs. Capacity: 4.0 GPM/Pressure Cut-Off: 41 psi/Fuse Size: 5 Amp/Connection: 3/8" NPT/hose/1/2", 1/2" NPT/hose 3/4"; 1/2" NPT, 3/4" hose.Features: 5-chamber Aqua Jet WPS pumps provide a reliable "heart" for small boat and RV water pressure systems Lower noise and water pulsation 4.0 GPM Capacity Specifications: Gallons Per Minute: 4 GPM Volts: 24v Box Dimensions: 6"H x 7"W x 11"L WT: 6.7 lbs UPC: 729321912938

Read more less

AQUA KING™ II Standard Fresh Water Pump - 24 VDC, 3.0 GPMShurflo's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, ensuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected, and can run dry without damage.Features: 3901 replacement Sealed switch Sealed motor Corrosion-resistant electro-coated motor 4 independent chambers Built-in check valve Co-molded diaphragm Adjustable switch Self-priming up to 6 Feet Dry run capability Thermally protected Ignition-protected, CE Specifications: Voltage: 24 VDC Flow Rate: 3.0 GPM (11.35 LPM) Amps: 3.8 Shut-Off Pressure: 55 PSI (3.8 BAR) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 3 GPM Max PSI: 55 Volts: 24v Box Dimensions: 5"H x 6"W x 11"L WT: 5 lbs UPC: 752324012398 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

HotShot HD6 Heavy Duty Washdown Pump - 24V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 8"W x 17"L WT: 9.9 lbs UPC: 671880842020

Read more less

Par-Max 3 Water Pressure Pump - 24V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 40 Gallons Per Minute: 3 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs UPC: 671880841825 Brochure (pdf)

Read more less

CM90 Circulation Pump - 17.2GPM - 12V - 3/4" OutletCM90 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body. Specifications: System Pressure:-0.3 to 3.0 bar; stationary max. 4.0 bar Liquid: Water/glycol mixture; max. 60% glycol, fresh and salt water Motor service life: More than 5,000 hours at nominal voltage, 10,000 start/stops. Interchangeable motor Dry running: 30 minutes Dimensions: 244mm L x 120mm W x 150mm H Weight: 6.6lbs Capacity: 17.2 GPM Ports: 3/4" Specifications: Gallons Per Minute: 17.2 GPM Volts: 12v Box Dimensions: 6"H x 8"W x 11"L WT: 6.7 lbs UPC: 7330717013172

Read more less

Water Booster System - 40 PSI - 4.5GPM - 12VThe Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of:12V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainerWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Max PSI: 40 Volts: 12v Box Dimensions: 9"H x 14"W x 17"L WT: 11.55 lbs UPC: 705474280018 Owner's Manual (pdf)

Read more less

15' White Coiled Hose with Adjustable NozzleFeatures: 15' White Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 7"W x 17"L WT: 1.3 lbs UPC: 725060044015

Read more less

Commercial Duty Water PuppyFlow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft)Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard). MotorPermanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump Port Type1/2" Internal Pipe Threads 1" External Hose Barb Adapter for 3/4 " External Garden Hose Thread included WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9 GPM Max PSI: 2.1-8.7 Volts: 12v Box Dimensions: 4"H x 6"W x 10"L WT: 6.9 lbs UPC: 671880532129 Owner's Manual (pdf)

Read more less

Par-Max HD3 Heavy Duty Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 3 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 6.95 lbs UPC: 671880841832 Brochure (pdf)

Read more less

Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 25 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 25 Gallons Per Minute: 3 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.85 lbs UPC: 671880841788 Brochure (pdf)

Read more less

HotShot HD4 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 12"W x 17"L WT: 10.4 lbs UPC: 671880841924 Brochure (pdf)

Read more less

RV Water Pump with Strainer - 12V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less