G3 Anchor Winch Wireless Remote - Auto DeployThe TRAC Outdoors G3 Anchor Winch Wireless Remote allows you to wirelessly raise and lower your anchor. It provides remote control and push-button anchor winch operation.Features: Use the wireless remote anywhere in the boat For use with the TRAC G3 Fisherman 25 (69002/T10108-G3) or Pontoon 35 (69003/T10109-G3)

Read more less

Foot Switch - Up - WhiteAnchor lifting switch w/safety cover to prevent accidental push-button operation.

Read more less

Deckhand 40 Remote Switch25' cord allows you to operate the DeckHand 40 from anywhere on the boatWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Seal Kit f/2200 & 3500 Series Windlass GearboxesKit includes: (2) 55 x 70 x 8 oil seal (2) 20 x 2 O-ring (1) Sight glass (1) O-ring ID 90mm section dia. 2mm (1) 25 x 47 x 7 oil seal

Read more less

Kit Freedom Key - WasherMaxwell key/washer kit for Maxwell Freedom series windlasses.

Read more less

Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Each standard DeckHand model runs on a 12-volt battery (not included) and features a 2-year warranty.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

QNC CHC Chain CounterQNC CHC is a complete and reliable tool to remotely operate the windlass and check the length of the lowered chain by means of the color graphic display. The panel surface is completely black tempered glass.Features: Automatic descent function Up alarm function Anchor weighing function in case of sensor failure. Windlass management with auto-free fall. Display the lowered chain length, in meters, feet, and fathom. Glass front Extremely thin profile Capacitive keys High brightness 3.5” color graphic display Multilingual user interface Power supply 12/24 Vdc Functioning over a wide range of environmental temperatures Protection rating IP67 CAN bus Communication Interface

Read more less

Foot Switch - Down - WhiteAnchor lowering switch w/safety cover to prevent accidental push-button operation.

Read more less

FootswitchSafety cover prevents accidental operation.

Read more less

FootswitchSafety cover prevents accidental operation.

Read more less

T6415-12 Reversing Solenoid 12V Unit for Windlass MotorsThe Quick T6415 is a reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external connections, this unit is very easy to install. The casing of this unit is IP66 waterproof. This unit is sold complete with the solenoid unit and product sheet.

Read more less

Stainless Steel Anchor Swivel for Chain Size 5/16"-1/2"316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.Specifications: Chain Size: 5/16" to 1/2" Strength: 17000lbs Material: Stainless Steel Length: 4-11/16" Width: 13/16" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

V1/V2/V3 Gypsy and Stripper Kit (No. 002)Replacement gypsy and stripper for Lewmar V1, V2 and V3 windlasses and the obsolete model Concept 1 windlass. Compatible With: V1, V2, V3 and Concept 1 windlassesTechnical Specifications: Rope Size - 1/2" to 5/8 (13 to 15.8 mm) (3 strand) Chain Size - 5/16" (7.94 mm) (G4) *Sold as an Individual 

Read more less

V4/V5 Windlass Gypsy #203 Replacement gypsy on Windlass Model V4/V5Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 5/8" (16 mm) (3 strand hard lay up) Chain Size - 3/8" (10 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

CHSX Deck Switch Open - BlackCompatible with 12/24V Lewmar electric winches and windlasses, the CHSX Deck Switch offers a protected switch that is weather-resistant, easily installed, easy to use, and prevents accidental activation. Features: Suitable for DC electric windlasses running on 12 or 24v IP67/5 rated for water resistance Twin sealed switch compartment New lower-profile design with updated styling Technical Specifications: Material - Composite plastic Position - Open In the Box: Deck switch Instruction manual *Sold as an individual Quick Guide (pdf)

Read more less

Generation 3 Pro-Series Gears and Shaft Kit Gears and shaft kit for Generation 3 Pro-Series windlasses.Compatible With: Pro-Series Generation 2 windlasses*Sold as an Individual 

Read more less

V700 1st Compound Gear Replacement 1st compound gear assembly for V700 windlass.Compatible With:Lewmar V700 windlass*Sold as an Individual  Owner's Manual (pdf)

Read more less

Deck Foot Switch - Windlass Down - Stainless SteelLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Read more less

Wired Windlass RemoteLewmar's wireless windlass remote. The socket must be positioned so that the operator can easily reach it.Features: Choose a clean, smooth, flat location Rear access is required for installation and maintenance There must be sufficient space behind the chosen position to pass the socket cable The back of the socket must not be exposed to contact with water or humidity Take particular attention when drilling the panels or parts of the boat. The holes must not weaken or cause the breakage of structural elements of the boat Make the electrical connections according to the wiring diagram

Read more less

Pro-Series Generation 3 Washer Kit Replacement washer kit for Pro-Series Genration 3 windleasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual 

Read more less

V700 Compound Gear Assembly Replacement compound gear assembly for V700 windlass.Compatible With:Lewmar V700 windlass*Sold as an Individual  Owner's Manual (pdf)

Read more less

Pro-Series Generation 3 Gasket Kit Replacement gasket kit forPro-Series Genration 3 windleasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual 

Read more less

Pro-Series Stripper Kit Replacement stripper and fasteners for Pro-Series windlasses.Compatible with: Pro-Series and Pro-Fish windlasses*Sold as an Indivudual

Read more less

V700 Fastening Kit 1 (Metric) Replacement fastening kit 1 for V700 windlasses.Compatible With:Lewmar V700 windlass*Sold as an Individual Owner's Manual (pdf)

Read more less

Pro Series Generation 1 & 2 Motor - 12V Replacement 12 V motor for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box:12 V Motor x  one (1)*Sold as an Individual

Read more less

V700 Combo Gypsy - 1/4" Replacement combo gypsy for V700 windlass - 1/4" (6 mm)Compatible With:V700 WindlassTechnical Specifications: Rope Size - 1/2" (12.7 mm)  Chain Size - 1/4" (6.35 mm)  *Sold as an Individual  Owner's Manual (pdf)

Read more less

Pro-Fish Drive Cap Assembly KitAllow your Series Pro-Fish 700 and 1000 windlass models to allow the anchor and rode in free-fall fashion.  No more waiting for the for the windlass motor to mechanically lower the anchor.Features: Direct replacement part Able to be manually overridden or controlled with a standard winch handle Made of Stainless Steel In the Box: Drive Cap with pin Plunger Instruction Manual *Sold as an Individual 

Read more less

Dual Gypsy Rope/Chain 6-7mm - 1/4"Features: Replacement gypsy for Lewmar Pro-Series 700, 1000, and Pro-Fish 700 windlasses Capable of handling metric chain

Read more less

Pro-Series Clutch Nut LeverPro-Series windlass clutch nut lever (wrench) is designed for installation and tensioning of windlass free-fall mechanism.Compatible with: Pro-Series windlass Por-Fish Windlass V700 Windlass *Sold as an Individual

Read more less

Deck Foot Switch - Windlass Up - White PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Read more less

Deck Foot Switch - Windlass Up - Stainless SteelLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Read more less

Guarded Rocker Switch (Up/Down)The guarded rocker switch controls the up and down function of all anchor windlass models with a solenoid/contactor or control box. The switch can be mounted at the helm as the main switch for operation or mounted at a second station as a secondary switch.  It features a raised plastic guard surrounding the rocker switch which helps prevent accidental activation of the windlass, enabling safer operation. Technical Specifications: Switch Direction - Up/Down Material - Plastic Power - 12/24V Color - Black *Sold as an Individual

Read more less

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each

Read more less

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass

Read more less

Reversing Solenoid Pack - 24VMaxwell Reversing Solenoid Pack 24V, replaces P19046.

Read more less

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rode CounterAuto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode. Rode length monitoring from the helm. Large LCD display with adjustable red back lighting shows length of anchor rode deployed. Display in feet or metres. Docking alarm warns skipper when anchor is close to docking. Easy set up with pre-programmed calibrations for rope/chain ropes. Install one or more units or combine with the AA550RC, AA500C or AA601 for multiple stations. Works on 12 or 24V DC. Standard 60mm (2.36) marine instrument console. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Maxwell AA560Panel Mount Windlass Controller and Rode Counter Preset stopping point on retrieval One-touch function to deploy and retrieve a preset length of rode Adjustable back lit display in feet, metres or fathoms Graphic LCD screen featuring intuitive user interface for simple operation Displays windlass speed and direction, plus battery voltage Safety lock to help protect against accidental windlass deployment Logs windlass operation hours to help ensure regular windlass maintenance This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation One foot switch supplied standard with each winch (except Freedom, Liberty and hydraulic units). UV stabilized plastic Quick Guide (pdf)Brochure (pdf)

Read more less

Pro-Series Bearings Kit Bearing kit for Generation 1 and 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual

Read more less

Gypsy Drum Deck Unit - V4/V5 Lewmar introduces the world's first compact stainless steel windlass for power and sailboats. The beautifully styled deck unit conceals a robust, reliable drivetrain, worm gearbox, and splined shaft for maximum strength and control.Features: Rope-chain gypsy Cone clutch for smooth, effortless control Manual Free-Fall W.A.R.P Drum (Drum version only) Robust and reliable drive train Manual override (optional) The most oversized rope chain windlass in the range *You will also require a gypsy, motor gearbox, circuit breaker, contactor, and switches. Owner's Manual (pdf)

Read more less

Spring-Pressure Arm for RC6, 8 & 10Maxwell Spring-Pressure Arm specifically for RC6, RC8 and RC10.

Read more less

Up/Down Footswitch - Compact, WhitePart #: P104809Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring. Quick Guide (pdf)Brochure (pdf)

Read more less

EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES)For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if accidentally dropped overboard. Quick Guide (pdf)Brochure (pdf)

Read more less

Stripper Arm Kit For Freedom 500Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Read more less

Quick T6315 is a non-reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external connections, this unit is very easy to install. The casing of this unit is IP66 waterproof. This unit is sold complete with the solenoid unit and product sheet. For use with 700, 1000, 1400, 1500, 1700 Watt Motors, 12V.

Read more less

Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)

Read more less