High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core

Read more less

Size 4 58mm Plain Bearing Pulley Upright BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-bearing components and interior frame are from marine grade 316 stainless steel and both plain and ball-bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up 12mm (7/16″) rope. Quick Guide (pdf)

Read more less

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are from marine grade aluminum, anodized for long life in the harsh marine environment.True clutch mechanismThis true clutch mechanism allows lines to be adjusted through the unit in the closed, locked position with minimal slippage. Release under load is positive and requires little effort. The mechanism’s opening and closing action is precise and easy to operate, even with cold, wet hands. A positive handle lock in the closed position is also featured.Kind to linesThe clutch’s cam and base, manufactured from high grade extruded aluminium, feature a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines.Stainless steel rope fairleads are fitted to both line entry and exit points; a feature which helps to prevent wear to both clutch and lines.Bolt-together construction for straightforward servicingThe DO 550 clutch range features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. A full range of components is available from our Barton stockist.Important fitting notes: rope clutchesWhen fitting ensure a fair lead straight through the clutch to prevent wear to side plates and/or reducedload capabilities.For best performance site clutch approximately 1ft (300mm) forward of the winch to ensure a fair leadboth vertically and horizontally.Use Barton deck organisers forward of the clutch to gain perfect alignment.Always use a bolt-through fastening with a suitable sealant.A drilling template is provided on our packaging for your convenience.Ergonomically designed handleThe handle is strong and easy to grip, with a positive smooth lock and unlock action.A unique feature of this new design is the removable insert on the top face of the handle.These inserts are available packaged separately with a selection for both cruising and racing yachts.

Read more less

Size 6 64mm Plain Bearing Pulley Single Block Fixed EyeThe Size 6 Barton blocks are designed as our high-load cruiser block range and are of rugged construction. It features high-grade injection molded side plates, with all load-carrying components from 316-grade stainless steel. Side plates are through-bolted and riveted for added strength and security. This good-looking and versatile range is designed for use on larger cruising and racing yachts. All are designed for ease of use with our ball-bearing mainsheet traveler system.The 64mm sheave Size 6 high load cruiser block range is of rugged construction, featuring high-grade injection molded side plates, with all load-carrying components from 316-grade stainless steel. Side plates are through-bolted and riveted for added strength and security. This good looking and versatile range is designed for use on larger cruising and racing yachts. All are designed for ease of use with our ball bearing mainsheet traveller system.Designed around a 64mm (2 1/2") sheave and to work with 14mm (9/16") ropes.

Read more less

'K" Cam MiniManufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins.'K' cams are very strong, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst maintaining minimum wear to both cam and line.'K' Cam bases feature a stainless steel wear bar for prolonged life.The cams utilise stainless steel leaf springs which give a smooth but positive action and a longer life span than conventional wire springs.'K' cam cleats come with a range of accessories including Pillar fairleads, Wire fairleads, and Top fairleadsSpecifications: Holding power 190kg (420lbs) Maximum line 10mm (3/8”) Hole centres 30mm (1 3/16) Weight 17g (0.6oz) Specifications: Color: Black/White Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 5035088701001

Read more less

Size 1 30mm Plain Bearing Pulley Block Double with SwivelThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durability. Also available in ball bearing sheave options, the lightweight modern design is available in variations that allow for a multitude of uses on every size craft.The 30mm sheave Size 1 block range is designed with an internal steel frame for added strength and durability. Available in plain and ball-bearing sheave options, the lightweight modern design is available in variations that allow for a multitude of uses on every size craft.Suitable for up to 8mm (5/16") rope. Quick Guide (pdf)

Read more less

Size 5 54mm Plain Bearing Pulley Block Reverse ShackleThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up to 12mm 7/16" rope. Quick Guide (pdf)

Read more less

Size 5 54mm Plain Bearing Pulley Block Single Block Fixed EyeThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up to 1 to 2mm 7/16" rope. Quick Guide (pdf)

Read more less

Size 7 70mm Plain Bearing Pulley Block Single SwivelThe size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber nylon reinforced molded side plates with an internal 316 stainless steel frame that is through-bolted and riveted for added strength and durability. This well-designed and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 70mm sheave Size 7 high load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber nylon reinforced molded side plates with an internal 316 stainless steel frame that is through-bolted and riveted for added strength and durability. This well designed and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Built with 70mm (2 13/16") sheaves and designed for a maximum rope size of 14mm – 9/16" rope.

Read more less

S-Hook - 9.5mm(3/8") DiameterS-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release.Grade 316 stainless steel Specifications: Color: Stainless Box Dimensions: 1"H x 3"W x 3"L WT: 0.4 lbs UPC: 9316800039739

Read more less

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free. Specifications: T-316 Stainless Steel construction Supplied with backing plate Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 7"L WT: 0.6 lbs UPC: 762799485856

Read more less

Rigging Tape - Black - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or people. When used as directed, the tape actually bonds to itself and makes one solid piece. It can also be used on hot objects for an emergency repair or radiator hoses, etc. Rigging tape is sold in black or white and packaged in a reusable, retail clamshell pack with color header and instructions.  Specifications: Color: Black Box Dimensions: 2"H x 5"W x 8"L WT: 0.25 lbs UPC: 762799501167

Read more less

Size 5 54mm Plain Bearing Pulley Block Single Double TangThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.Features:Suitable for up 12mm/7/16" rope Quick Guide (pdf)

Read more less

Transom Bung & Socket Set - BlackThis screw-type drain bung and socket is still among the best available. They are supplied with a rubber ‘O’ ring for a watertight seal. Quick Guide (pdf)

Read more less

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core Available in six sizes. Manufactured in marine grade aluminium with a hard anodised finish. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm. Quick Guide (pdf)

Read more less

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core Available in six sizes. Manufactured in marine grade aluminium with a hard anodised finish. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm. Quick Guide (pdf)

Read more less

Stainless Steel Welded Pad Eye - 2-1/4"L x 5/8"WSpecifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 1/4" (6 mm) Length 2-1/4" (57 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-11/16" (42 mm) SWL 750 lbs. (350 kg) Weight 1.75 oz. (50 g) Specifications: Color: Stainless Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 740507007804

Read more less

Size 1 Deck Organizer - 4 SheaveDesigned for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size up to 7/16"Deck organizers can be double-stacked.Technical Specifications: Material - Spectro Anodized Aluminum  Dimensions (L x W x H) - 7.87" x 1.1" x 1" (200 x 28 x 25 mm)  Weight -  7.05 oz  (200 g)   Sheave Material - Molded Acetal Sheave Diameter - 1.26" (32 mm) Sheave Width - .67" (17 mm) Maximum Line Diameter - .47" (12 mm) *Sold as an Individual  Quick Guide (pdf)Brochure (pdf)

Read more less

Kevlar Cam Cleat MidiManufactured from a composite Kevlar/Zytal material, this advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines while maintaining minimum wear to both cam and line.Specifications: Max Line Ø: 6 mm - 12 mm (0.4 - 0.55 inches) Fastenings Ø: 5 mm (0.20 in.) Fastenings Center: 40 mm (1.57 in.) Holding Power: 230 kg (507.1 lbs) Weight: 34 kg (74.96 lbs)

Read more less

Pillar Fairlead for 70300 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.Features: Made for Barton’s 70300 Maxi Cam Cleat Stainless steel pillars to add strength and wear resistance

Read more less

Pillar Fairlead for 70200 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.Features: Made for Barton’s 70200 Midi Cam Cleat Stainless steel pillars to add strength and wear resistance

Read more less

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low friction ball race system features Delrin balls running on a large diameter center boss, which ensures an extremely low friction performance.  Technical Specifications: Overall Diameter - 2- 3/10" (58mm) Hub Width -  .71" (18mm) Bore - .24" (6mm) *Sold as an Individual

Read more less

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of lines, while maintaining minimum wear to both cam and line.Specifications: Max Line Ø: 10mm - 14mm(0.4" - 0.55") FasteningsØ: 5mm (0.20") Fastenings Center: 50mm (1.97") Holding Power: 260kg (573.20lbs) Weight: 50kg (110.23lbs) Specifications: Color: Black Box Dimensions: 1"H x 3"W x 4"L WT: 0.3 lbs UPC: 5035088703005

Read more less

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size up to 7/16"Deck organizers can be double stacked.Technical Specifications: Material - Spectro Anodized Aluminum  Dimensions (L x W x H) - 11.3" x 1.1" x 1" (287 x 28 x 25 mm)  Weight -  10.41 oz  (295 g)   Sheave Material - Molded Acetal Sheave Diameter - 1.26" (32 mm) Sheave Width - .67" (17 mm) Maximum Line Diameter - .47" (12 mm) *Sold as an Individual  Quick Guide (pdf)Brochure (pdf)

Read more less

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbs UPC: 5035088815470 Brochure (pdf)

Read more less

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 5035088815463 Brochure (pdf)

Read more less

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective and reliable means of automatic bailing Made of stainless steel and guaranteeing years of trouble free servicing Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 7"L WT: 0.75 lbs UPC: 9316800468089

Read more less

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

Read more less

Stainless Steel Cleat - 3"3" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/4" (6mm), Length 3" (76mm), Height .6" (15mm), Fastener size #8 FH, Fastener center/center .78" (20mm), Weight 1.3oz (.04kg)

Read more less

Cam Fairlead - RedMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Read more less

Double Stanchion Tube - 26"Double lifeline stanchion is 26" tall and accepts up to 5/16" (8mm) diameter coated wire. Works with Schaefer base 36-01. L 26" (660 mm), W 1" (25 mm), T 1/16" (1.5 mm), Weight 1 lb. 6 oz. (624 g)

Read more less

Stainless Steel Welded Pad Eye - 2"L x 5/8"WSpecifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 3/16" (5 mm) Length 2" (51 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-7/16" (37 mm) SWL 650 lbs. (295 kg) Weight .5 oz. (14 g) Specifications: Color: Stainless Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 740507007781

Read more less

Drain Plug Only - Plastic NylonFeatures: Plug to suit RF294 & RF737 Water tight seal Retaining legs UV Stabilized Nylon plug Specifications: Color: Black/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.05 lbs UPC: 9316800031252

Read more less

Symmetric Carbine Hook - Length 100mm - 13/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape With eye to attach a webbing or a splicing Applications:For fastening applications Specifications: Materials 316L stainless steel grade Length (inch) 3-15/16" Working load (lb) 2640 WLL (lb) 1100 Breaking load (lb) 5510 Weight (lb) 0.291 Dimensions (see 2nd image): A (inch) 19/32" B (inch) 33/64" D diameter (inch) 25/64"

Read more less

Standard Cam-Matic® Aluminum Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.Specifications: Weight: 85g / 3 oz. Maximum working load: 136kg / 300lb.

Read more less

Horn Cleat - Nylon - 76mm(3") LongFeatures: Rope Ø: 4mm(5/32") U.V. Satbilized Nylon Specifications: Color: Black Box Dimensions: 1"H x 1"W x 4"L WT: 0.1 lbs UPC: 000676849026

Read more less

Symmetric Carbine Hook - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Symmetrical shape With eye to attach a webbing or a splicing Applications:For fastening applications Specifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working load (lb) 1940 WLL (lb) 570 Breaking load (lb) 2860 Weight (lb) 0.159 Dimensions (see 2nd image): A (inch) 33/64" B (inch) 7/16" D diameter (inch) 5/16"

Read more less

Symmetric Carbine Hook Without Eye - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working load (lb) 1940 WLL (lb) 700 Breaking load (lb) 3520 Weight (lb) 0.137 Dimensions (see 2nd image): A (inch) 33/64" B (inch) 33/64" D diameter (inch) 5/16"

Read more less

Stainless Steel Welded Pad Eye - 1-7/8"L x 5/8"WSpecifications: Eye Width 3/8" (10 mm) Eye Height 3/8" (10 mm) Eye Stock 3/16" (5 mm) Length 1-7/8" (48 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-5/16" (33 mm) SWL 250 lbs (115 kg) Weight .5 oz. (14 g) Specifications: Color: Stainless Box Dimensions: 1"H x 2"W x 4"L WT: 0.05 lbs UPC: 740507007774

Read more less

2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

Read more less

Micro Standard Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb

Read more less

Standard Carbo-Cam® Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead.Specifications: Weight: 54g / 2 oz. Maximum working load: 91kg / 200lb.

Read more less

Ball Bearing Swivelling Cam Cleat BaseSwivel cleat bases permit easy cleating and releasing from any angle.Swivel cleat bases permit easy cleating and releasing from any angle. Height adjustable arm for optimum cleating angle. Twin ball bearing race minimises friction. Adjustable ratchet system prevents the arm from falling to leeward. Twin rows of ball bearings support the cleat arm, and stops are provided to limit rotation to 260°. The rotation stop on the cleat arm moulded cleat arm cradle part can be cut off to allow full 360° rotation. Fork fittings have a 5mm pin to permit direct attachment to the head post of a block (ie. not using a shackle). Suits traditional post/shackle head blocks and Dyneema® Link head Orbit Blocks™.Features: Height adjustable arm Twin ball bearing race Adjustable ratchet system Applications:Mainsheet systems on dinghies and sportboats to 8M(26')Materials: Alloy cleating arms Fiber reinforced Nylon base Grade 316 stainless steel fittings Specifications: Color: Black Box Dimensions: 3"H x 3"W x 9"L WT: 0.8 lbs UPC: 9316800145836

Read more less

Anchor Chain Claw-Hook TensionerThe "Claw Hook" design features a shorter overall length. The claw design will grab 1/4", 5/16" and 3/8" chain. The toggled claw enables you to grab the chain quickly and easily. Two 1/4" mounting holes are provided in the base of the unit and the claw has 1-1/2" of finite adjustment. The overall length closed is adjustable between 11" and 13" with a 2-1/8" throw or quick release. The handle/lever is secured when closed with a ball type QR pin attached with a lanyard.  

Read more less

Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines.  The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining rod, through-bolted onto a fully enclosed backing plate for a clean finish.  Ideal for racers and cruisers alike.  The Stanchion Bullseye has no moving parts so weight is kept to a minimum and no new holes are required in the deck. The superior, super smooth, hard-anodized finish on the high load eye provides low friction and excellent support for slick running lines, and excellent abrasion resistance for long-term service life.  Making sailing life smoother.Compatible With: Stanchions up to 1" to 1.25" (25 to 31.75 mm) wide  Maximum Rope Diameter - 3/8" (9.56 mm) Bore - .58" (16 mm) Dimensions (L x H x W) - 3.2" x 2.1" x 2.1"  (79 x 55 x 55mm) Weight - 3.2 oz (90 g) *Sold as an Individual  Specifications: Color: Black Box Dimensions: 3"H x 3"W x 6"L WT: 0.25 lbs UPC: 5035088087143 Brochure (pdf)

Read more less

Quick Cleat - 5/16" - WhiteThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.)  The Barton Marine Quick Cleat offers exceptional value. From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other.Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Features: Dupont Zytel Construction Easy to install Technical Specifications: Color - White Material - Zytel nylon Working Load - 154 lb (70 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1-1/16" (2.7 cm) Weight - 2 oz (55 g) *Sold as an Individual  Brochure (pdf)

Read more less

Fairlead Black Plastic with Stainless Steel Liner - 8.5mm(5/16") IDFairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.Materials: Impact resistant, U.V. stablized Nylon Stainless steel liner Specifications: Color: Black Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 9316800300679

Read more less

Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is strong enough to cope with poor leads.Soft attachment specialistsSHOCKS are designed primarily for 'soft attachment'; spliced to a line end or lashed in place. The elongated attachment aperture is also ideal for webbing attachment, ensuring the intended orientation is maintained.Virtually limitless applicationsThe applications for SHOCKS are virtually limitless, including numerous high performance dinghy and small sailboat rigging applications including tweakers, vangs, trapezes, cunninghams, barber haulers and kite bridles. They are also handy on larger boats for uses such as lazy jacks, sail covers, tie-downs, ladder and motor hoists.Hidden performanceAt a mere 2.5g (0.1 oz), SHOCKS are outstanding performers in the strength and weight stakes. The clever design and exacting finishing also provide excellent free running at moderate changes of angle. Small & hi-tech line specialists SHOCKS accept lines from 1.4mm (1/16") up to 8mm (5/16") and function just as well with hi-tech uncovered braids as with traditional double braids.Features: Performance & versatility Ultra lightweight Ultra compact Durable Color coded Impact resistant Small line optimised High load capacity Poor alignment tolerant Soft attachment compatible Grit & salt resistant Applications:Unlimited uses, including kitesurfing, paragliders, sports kites, power kites, stunt kites, depower kites, traction kites, for deflection or purchase system on control linesMaterials:Anodized AluminumSpecifications:Rope Ø:1.4mm-5mm(1/16" - 3/16")Height:8.5mm(5/16")Width: 14.9mm(9/16")Length:22.9mm(7/8")M.W.L.:175kg(385lbs)B. L.:350kg(770lbs)Weight:2.5g(0.01oz) Specifications: Color: Grey Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 9316800502530 Brochure (pdf)

Read more less