With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 029402007691

Read more less

Ulterra/RT Ulterra Corded Foot PedalDual mode operation controls AutoStow/Deploy and Power Trim as well as steering, speed, prop on/off, Spot-Lock, and AutoPilot. Includes an 18' cord with a waterproof connector.Features: Spot-Lock ON/OFF button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options AutoPilot ON/OFF button with LED indicator Momentary/Constant ON button with LED indicator Rotary speed control dial 18' cable with waterproof connector plug Works in conjunction with i-Pilot, i-Pilot Link, and new GPS navigation systems Compatible with Ulterra and Riptide Ulterra trolling motors model year 2017 and after

Read more less

RTA-62 Quick Release BracketEasily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" and 87" shaft trolling motors.Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security. Designed for use in freshwater or saltwater

Read more less

3/8" Backing Disk for Minn Kota Quest - 2-PackSpecifications: Size: 3/8" Backing Disk Specifically for Minn Kota Quest 2-Pack

Read more less

14" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 14" x 8" x ½”Suggested hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Read more less

5/16" Backing Disk for Kraken Mounts - 2-PackSpecifications: Size: 5/16" Backing Disk Specifically for Kraken Mount 2-Pack

Read more less

Small Offset Trolling Motor Plate for Garmin’s KrakenThe Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18.5" x 13.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

PowerPlus 12V 26 AMP On-Board Battery Charger & Maintainer Versatile Battery Compatibility: Lead-Acid:Effectively charges traditional lead-acid batteries. AGM:Optimizes charging for advanced AGM batteries. Lithium:Delivers precise charging profiles for lithium-ion batteries, including 36V lithium marine trolling motor or golf cart batteries. Built for Harsh Environments: IP68 weather-resistant:Withstands rain, snow, dust, and even submersion for extended periods. Perfect for year-round golf cart storage or charging outdoors, or marine applications where exposure to the elements is common. Shock and vibration resistant:Engineered to handle the demands of golf cart operation on uneven terrain or marine environments with rough water conditions.   The Battery Tender® PowerPlus 26 AMP On-Board 12V Battery Charger and Maintainer provides high-voltage power in a compact package. This IP68 weather-resistant charger offers several interchangeable adapters for golf carts or marine applications. The ring terminals directly connect to your battery for optimal charging. Mounting brackets make on-board installation seamless so your charger stays secure. PowerPlus chargers are also available for additional applications in 24V, 36V, and 48V. Features: STAY CHARGED: This 26 AMP Charger provides a full charge to your 12V battery before automatically switching to float mode maintaining proper voltage levels without overcharging.  PROTECTED: Rated IP68 weather resistant and shock and vibration resistant; with safety features including spark-proof and reverse charging protection.  CONNECT AND FORGET: With a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage spaces for your convenience  SAFE AND SECURE: Spark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power.  Includes:  12v  26 AMP Battery Charger Mounting Hardware 6.5' AC input 4.9' DC output cables 12' Accessory cables Reach 12 Feet Dimensions 11.88" x 7.48" x 3.22", 7.67 lbs Included in the Box 12V 26 AMP battery charger, mounting hardware, 6.5 foot AC input, 4.9 foot DC output cables, 12 foot accessory cables, ring terminal cables with 40A fuse Warranty 2 Year   DC Power Connector - Plug & Receptacle Battery Tender® Black Power Connect Trolling Motor D/C Connector is an onboard connector for DC to DC connections. Perfect for battery connections to trolling motors, navigational electronics, or any DC accessory. The unique screw and lock device provides a positive connection that avoids vibration and water incursion. More Power, Less Weight Upgrade your marine vehicle’s power supply and electrical flow with the Battery Tender® DC Power Connector for trolling motors, navigational electronics, and other DC accessories. Weighing just over 7 ounces, our small 2-pin connector is rated at 80 amps of continuous service, allowing for a more powerful power source without weighing you down.  Built to Last  Engineered with only the best materials, we have the utmost confidence in our trolling motor plug's ability to handle the rigors of the water. We’ve even included a 5-year warranty that covers material and workmanship defects for your peace of mind. The internal and external hardware feature corrosion-resistant stainless steel with silver-plated copper contacts to last longer and be trusted to get the job done time and time again.  Features: Easy configuration  For 12,24,36 Volts Applications: Receptacle, plug, gasket, and cable cover screws (2) Specifications: Voltage Rating: 0-48VDC (UL), 0-48VDC (CSA) Current Rating Amperes (with a 6-AWG wire connection): 80 amps (UL), 40 amps (CSA) Volts: DC only Housing Flammability: UL94HB Class (3) (4) Connector Weight: 0.45 lbs Connector Dimensions (inch): 2" X 3.25" X 3.5" Total Kit Weight: 0.05 lbs Receptacle Connector Dimensions (inch): 1.5" X 3" X 1"  

Read more less

PowerPlus 24V 20 AMP On-Board Battery Charger & Maintainer Versatile Battery Compatibility: Lead-Acid:Effectively charges traditional lead-acid batteries. AGM:Optimizes charging for advanced AGM batteries. Lithium:Delivers precise charging profiles for lithium-ion batteries, including 36V lithium marine trolling motor or golf cart batteries. Built for Harsh Environments: IP68 weather-resistant:Withstands rain, snow, dust, and even submersion for extended periods. Perfect for year-round golf cart storage or charging outdoors, or marine applications where exposure to the elements is common. Shock and vibration resistant:Engineered to handle the demands of golf cart operation on uneven terrain or marine environments with rough water conditions.   The Battery Tender® PowerPlus 20 AMP On-Board 24V Battery Charger and Maintainer provides high-voltage power in a compact package. This IP68 weather-resistant charger offers several interchangeable adapters for golf carts or marine applications. The ring terminals directly connect to your battery for optimal charging. Mounting brackets make on-board installation seamless so your charger stays secure. PowerPlus chargers are also available for additional applications in 12V, 36V, and 48V. Features: STAY CHARGED: This 20 AMP Charger provides a full charge to your 24V battery before automatically switching to float mode maintaining proper voltage levels without overcharging.  PROTECTED: Rated IP68 weather resistant and shock and vibration resistant; with safety features including spark-proof and reverse charging protection.  CONNECT AND FORGET: With a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage spaces for your convenience  SAFE AND SECURE: Spark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power.  Includes:  20 AMP Battery Charger Mounting Hardware 6.5' AC input 4.9' DC output cables 12' Accessory cables Reach 12 Feet Dimensions 11.88" x 7.48" x 3.22", 7.67 lbs Included in the Box 24V 20 AMP battery charger, mounting hardware, 6.5 foot AC input, 4.9 foot DC output cables, 12 foot accessory cables, ring terminal cables with 40A fuse Warranty 2 Year   DC Power Connector - Plug & Receptacle Battery Tender® Black Power Connect Trolling Motor D/C Connector is an onboard connector for DC to DC connections. Perfect for battery connections to trolling motors, navigational electronics, or any DC accessory. The unique screw and lock device provides a positive connection that avoids vibration and water incursion. More Power, Less Weight Upgrade your marine vehicle’s power supply and electrical flow with the Battery Tender® DC Power Connector for trolling motors, navigational electronics, and other DC accessories. Weighing just over 7 ounces, our small 2-pin connector is rated at 80 amps of continuous service, allowing for a more powerful power source without weighing you down.  Built to Last  Engineered with only the best materials, we have the utmost confidence in our trolling motor plug's ability to handle the rigors of the water. We’ve even included a 5-year warranty that covers material and workmanship defects for your peace of mind. The internal and external hardware feature corrosion-resistant stainless steel with silver-plated copper contacts to last longer and be trusted to get the job done time and time again.  Features: Easy configuration  For 12, 24, 36, and 48 Volts Applications: Receptacle, plug, gasket, and cable cover screws (2) Specifications: Voltage Rating: 0-48VDC (UL), 0-48VDC (CSA) Current Rating Amperes (with a 6-AWG wire connection): 80 amps (UL), 40 amps (CSA) Volts: DC only Housing Flammability: UL94HB Class (3) (4) Connector Weight: 0.45 lbs Connector Dimensions (inch): 2" X 3.25" X 3.5" Total Kit Weight: 0.05 lbs Receptacle Connector Dimensions (inch): 1.5" X 3" X 1"  

Read more less

PowerPlus 36V 18 AMP On-Board Battery Charger & Maintainer Versatile Battery Compatibility: Lead-Acid:Effectively charges traditional lead-acid batteries. AGM:Optimizes charging for advanced AGM batteries. Lithium:Delivers precise charging profiles for lithium-ion batteries, including 36V lithium marine trolling motor or golf cart batteries. Built for Harsh Environments: IP68 weather-resistant:Withstands rain, snow, dust, and even submersion for extended periods. Perfect for year-round golf cart storage or charging outdoors, or marine applications where exposure to the elements is common. Shock and vibration resistant:Engineered to handle the demands of golf cart operation on uneven terrain or marine environments with rough water conditions.   The Battery Tender® PowerPlus 18 AMP On-Board 36V Battery Charger and Maintainer provides high-voltage power in a compact package. This IP68 weather-resistant charger offers several interchangeable adapters for golf carts or marine applications. The ring terminals directly connect to your battery for optimal charging. Mounting brackets make on-board installation seamless so your charger stays secure. PowerPlus chargers are also available for additional applications in 12V, 24V, and 48V. Features: STAY CHARGED: This 18 AMP Charger provides a full charge to your 36V battery before automatically switching to float mode maintaining proper voltage levels without overcharging.  PROTECTED: Rated IP68 weather resistant and shock and vibration resistant; with safety features including spark-proof and reverse charging protection.  CONNECT AND FORGET: With a low maintenance design, our universal vehicle charger and maintainer is compact, lightweight, and easy to operate even in small storage spaces for your convenience  SAFE AND SECURE: Spark-proof during lead connection and automatically detects reverse polarity to ensure a correct, locked-in connection before providing power.  Includes:  36v 18 AMP Battery Charger Mounting Hardware 6.5' AC input 4.9' DC output cables 12' Accessory cables Reach 12 Feet Dimensions 11.88" x 7.48" x 3.22", 7.67 lbs Included in the Box 36V 18 AMP battery charger, mounting hardware, 6.5 foot AC input, 4.9 foot DC output cables, 12 foot accessory cables, ring terminal cables with 40A fuse Warranty 2 Year   DC Power Connector - Plug & Receptacle Battery Tender® Black Power Connect Trolling Motor D/C Connector is an onboard connector for DC to DC connections. Perfect for battery connections to trolling motors, navigational electronics, or any DC accessory. The unique screw and lock device provides a positive connection that avoids vibration and water incursion. More Power, Less Weight Upgrade your marine vehicle’s power supply and electrical flow with the Battery Tender® DC Power Connector for trolling motors, navigational electronics, and other DC accessories. Weighing just over 7 ounces, our small 2-pin connector is rated at 80 amps of continuous service, allowing for a more powerful power source without weighing you down.  Built to Last  Engineered with only the best materials, we have the utmost confidence in our trolling motor plug's ability to handle the rigors of the water. We’ve even included a 5-year warranty that covers material and workmanship defects for your peace of mind. The internal and external hardware feature corrosion-resistant stainless steel with silver-plated copper contacts to last longer and be trusted to get the job done time and time again.  Features: Easy configuration  For 12, 24, 36, and 48 Volts Applications: Receptacle, plug, gasket, and cable cover screws (2) Specifications: Voltage Rating: 0-48VDC (UL), 0-48VDC (CSA) Current Rating Amperes (with a 6-AWG wire connection): 80 amps (UL), 40 amps (CSA) Volts: DC only Housing Flammability: UL94HB Class (3) (4) Connector Weight: 0.45 lbs Connector Dimensions (inch): 2" X 3.25" X 3.5" Total Kit Weight: 0.05 lbs Receptacle Connector Dimensions (inch): 1.5" X 3" X 1"  

Read more less

G-Force Trolling Motor Handle & Cable  - RedEndorsed and proven by Gerald "G-Man" Swindle.The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology.This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors.Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy!As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations.*NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS* WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quick Release Plate System - White This quick-release bracket allows you to easily install or uninstall your Force® Kraken trolling motor.

Read more less

24V Trolling Motor Wiring Kit with 70A Plug & ReceptacleThe Marinco Trolling Motor Wiring Kit makes trolling motor installation simple, packaging everything you need for a clean and professional set-up into a single box. Take the guesswork out of trolling motor installation with the Marinco Trolling Motor Wiring Kit. Bringing together the industry’s most trusted brands, the kit features marine-grade equipment for quality installations that go the distance. Clear instructions and color coding make installation quick and easy. And get total peace of mind, knowing you’ve got everything you need for a professional set-up – all in a single box.Features: Pre-terminated Connections for Quick and Easy Installation Bonded Cable for Ease of Routing Ancor® Lugs and Heat Shrink Tubing Includes Jumper to put Batteries in Series Kit Includes: 44ft of 6/2AWG Bonded Cable 50A Blue Sea Systems® 285 Series Circuit Breaker Pre-terminated Lug Connections (5/16” lugs for universal battery terminal connections, color coordinated for positive and negative) One Series Jumper for Battery Connection 70A Marinco Trolling Motor Plug and Receptacle

Read more less

Quick Release Plate System - BlackThis quick-release bracket allows you to easily install or uninstall your Force® Kraken trolling motor.

Read more less

Talon Side Shim Kit - BMSThe Talon BMS (Bob's Machine Shop) Side Shim Kit fills the recess gap on side of BMS jack plate; for jack plate mounting - port or starboard side.

Read more less

G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

Extra Power Puck - BlackComes ready with a power plug installed.

Read more less

G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

24V 6 Gauge Heavy Duty Series SystemAlways on the cutting edge of rigging and power solutions, CONNECT-EASE has been watching the trolling motor landscape change significantly as Minn Kota, Power-Pole, Garmin, Lowrance, and others launch more powerful and torque-enabled models in everything from 12 to 36 volts; there are even some 48-volt models starting to appear. The upcoming years will be fascinating as Minn-Kota showcases the pre-launched, completely redesigned brushed and new brushless trolling motors—everything from Terrova to Ulterra to Ultrex—as exciting QUEST series versions in these trolling motor families.The same goes for Power-Pole with their recently introduced MOVE brushless trolling motors. Garmin and Lowrance also promise to show some advanced, trolling motor designs.Yes, trolling motors are getting a lot more advanced, and with that, rigging will become an even greater challenge. These brushed and brushless trolling motors require clear, clean, and reliable power, which is where CONNECT-EASE trolling motor rigging and power solution products come in.Features: 6-gauge wire, a quick and easy installation, and powerful, proven performance for any 24V trolling motor installation Lithium-compatible and the best power connection for 60-120 amp lithium batteries and any brand/model 24V trolling motor Heat-shrinkable butt splices

Read more less

36V Parallel Kit for 2-36V Batteries to 1 MotorUse with all 36V Trolling Motors, Rigging, and Battery Removal is a Foolproof Plug and Play System with Built-in Onboard Charging Leads integrate your onboard charger through pre-wired connections and heat-shrinkable splices the best marine corrosion protection "Double Time" 36V parallel Kit for (2) 36V batteries to (1) 36V trolling motor W charging Leads.

Read more less

24V Single Case Batter Trolling Motor SystemFact: Lithium batteries have greatly reduced weight while greatly increasing consistent voltage and power, as well as runtime. Designed specifically for lithium battery users, meets the CONNECT-EASE INGNITE SINGLE CASE.Designed to power any 24-volt trolling motor on the market, this CONNECT-EASE IGNITE SINGLE CASE features a six-gauge wire, onboard charging leads, a 60-amp circuit breaker, and a negative connection block, offering anglers quick installation with everything preconfigured for proven, reliable performance. It also includes a 24V single-case battery connection and a 60-amp circuit breaker negative connecting post.The system is the best power connection for any trolling motor with 60–100 AH lithium single-case batteries, which include Dakota Lithium, Amped, Norsk, Monster, Lithium Pro, Abyss, and more.Features: Plug-and-play connections 6-gauge wire, onboard charging leads, 60A circuit breaker, and negative connection block— bringing a quick and easy installation and powerful, proven performance to any 36V trolling motor installation Lithium compatible and the best power connection for a 60–120-amp lithium battery and any brand/Model 36V trolling motor. Integrate the onboard charger through pre-wired connections 60A circuit breaker included

Read more less

12V Single Trolling Motor Kit 8 GaugeFeatures: 8 Gauge marine grade equipment connection Plug & Play Connections Lithium Compatible Suitable for use t-40° to 221° UL1977 120 Amp Rating Lithium Compatible

Read more less

36V Heavy Duty 6 Gauge SystemThis Connect-Ease kit is a 36V heavy-duty series kit with a 6 gauge wire.Features: Plug-and-play connections Features 6 gauge wire, bringing a quick, easy installation and powerful, proven performance to any 36V trolling motor installation.  Lithium compatible and the best power connection for a 36V 60–120-amp lithium battery and any brand/model 36V trolling motor Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof

Read more less

24V Parallel Kit for 2 24V Batteries to 1 MotorThe Connect-Ease “Double Time” 24V parallel kit allows the combination of two 24-volt lithium batteries for much longer trolling motor runtime. Perfect for serious anglers, guides, professional tournament anglers, or anyone who wants to be on the water for countless, continual hours without any loss of power on a single charge.The charging connection mates with Dakota Lithium, Amped, and other 24V charger connections.Features: Plug-and-play connections are lithium-compatible Parallel 24V batteries for better performance Integrate the onboard charger through pre-wired connections Heat-shrinkable butt splices

Read more less

12V Parallel Battery Connection KitEasy 12 Volt Parallel Battery Connection system for boats, ice houses, and ag equipment.Features: Parallel multi-purpose 8 gauge parallel system for powering small trolling motors, wenches, halogen lights, Ag Equipment, etc. Plug & Play Connections Lithium Compatible Suitable for use t-40° to 221° UL1977 120 Amp Rating Lithium Compatible

Read more less

3 12V Battery Parallel Quick Connect SystemThe Connect-Ease RCE312VRV allows connecting three 12-volt batteries in parallel to increase users' runtime when away from any wired, plug-in power source. The Connect-Ease (3) 12V parallel system was specifically designed with RV and off-grid enthusiasts in mind whose power requirements may also require a “solar” connection. The RCE312VRV is compatible with other solar products, and does provide a direct Heat Shrinkable accessory splice connection that can be used to input to a solar panel; other additional, third-party low amperage accessories can be added.Features: Plug & Play Connections Solar connection designed to recharge all 3 12V batteries. Handles 60 to 240 amps of DC power. Lithium Compatible

Read more less

24V Trolling Motor Separated Battery SystemThis is a 24V Series trolling motor with a charger kit for separate battery compartments found on Lund, Crestliner, Pro Craft, and many boats. Connect-Ease's patented systems take the hassle out of boat wiring with an easy-to-install connection system that takes the guesswork and hassle out of 24V battery connections.The perfect 24V series trolling motor and battery connection keep serious fishing enthusiasts on the water longer. For those who want the ability to disconnect, remove, or replace batteries quickly without removing on-board charging systems, Connect-Ease's system correctly connects batteries in series every time.Installation:Once Connect-Ease’s products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Easily replace batteries in tight compartments without dropping nuts, connections, or tools at the bottom of the boat. This easy-to-use system allows batteries to be removed in seconds and 24V systems to be hooked up easily and correctly every time. Connect-Ease’s multi-bank on-board charging leads are the perfect connection for the best performance from high-output trolling motors. Keep spare batteries with Connect-Ease’s additional 12V battery easy connections.Install in seconds for quick battery replacement for extra-long days, weekends, or tournaments on the water.Features: Plug-and-play connections are lithium-compatible 8-gauge marine-grade wire with a 60" separate battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof One-year warranty Saltwater approved Made in the USA

Read more less

12V Trolling Motor Connection with ChargingUsers can do this by themselves since this versatile product allows them to connect any 12V trolling motor, MotorGuide, MinnKota, onboard charging systems, or other power needs. Also, this charging connection can be connected to shallow water anchors, sporting clay machines with solar charging, and ATVs with accessory needs. Features: How-to instructions are included Plug-and-play connections lithium-compatible 8-gauge marine-grade wire with heat-shrinkable butt splices Integrated charging leads

Read more less

36V Trolling Motor Separated Battery SystemThis is a 5 ft. extension on the RCE36VB5CHK kit. Designed for boats with two batteries in one compartment and the third in a different compartment.Features: Plug & play connections 8-gauge marine grade wire with 60” separated battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible

Read more less

24V Series Standard Trolling Motor SystemCheck out this easy-to-use system for fishing and outdoor enthusiasts who want to quickly connect, remove, or just disconnect their marine batteries for charging, replacement, storage, or possible theft.Connect-Ease's patented system takes the guesswork and frustration out of hooking up 24-volt trolling motors and correctly connecting batteries in series every time. Connect-Ease's industrial-grade, corrosion-free connections provide clean voltage, keeping high-output trolling motors in top condition.Easy battery removal and replacement from tight boating compartments now only takes seconds, without tools. The product features corrosion-free connections and provides the voltage vital for marine equipment performance and longevity.Once Connect-Ease products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug-and-play connections lithium-compatible 8-gauge wire, onboard charging leads, bringing a quick and easy installation and powerful, proven performance to any 24V trolling motor installation Lithium compatible and the best power connection for 60–120-amp lithium batteries and any brand/model 24V trolling motor Makes rigging and battery removal foolproof Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved 1- 24 volt trolling motor connection 2 - 6 AWG easy 12-volt battery connectors with 24V bridge 50-Amp rating

Read more less

12V Parallel Battery Connection SystemThis 12V parallel battery connection kit creates the perfect parallel connection for use in extended battery power needs, such as 12V trolling motors, ATVs, RVs, ice houses, agricultural equipment, sump pumps, lights, cabins, and anywhere extended 12V power is needed. Also, for boats and other applications needing to create more power for running 12V trolling electronics, live wells, bilge pumps, power poles, and more starting batteries for large outboards, batteries draw power from both batteries and will charge together off the alternator or charger at the same time. If users need more power and voltage to start, using this product, users can run all their electronics, live wells, and bilge pumps off a dual battery setup. This is the product to power a boat for longer days on the water without the worry of draining the main battery, so users will always have the power they need to spend more time on the water. Features: Plug-and-play connections are lithium-compatible Parallel multi-purpose 6-gauge battery connections with an 8-gauge parallel system for powering small trolling motors, wenches, halogen lights, AG equipment, etc. Marine grade components

Read more less

Quik12 12V Trolling Motor/Lawn Tractor Quick Connect SystemThis 12V quick-connect kit is designed for a lawn tractor or trolling motor.Applications: Lawn tractors Trolling motors Ag equipment Boat lifts Ice houses Kayaks, duck boats, and more Features: Plug-and-play connections lithium-compatible Suitable for use t -40° to 221° UL1977 120 amp rating

Read more less

36V Trolling Motor Connection SystemThis easy-to-use 36V series quick connect/disconnect system keeps serious fishing enthusiasts on the water longer.The perfect 36V series connection with multi-battery onboard charging leads is the perfect connection for the best performance from high-output trolling motors. Keep spare batteries on board with Connect-Ease's additional 12V easy battery connections for quick battery replacement in seconds for extra-long days, weekends, or tournaments out on the water. For those who want a trouble-free way to maintain and replace trolling motor batteries with on-board charging systems.Everything stays perfectly connected! Protect the expensive equipment.Easily replace batteries in tight compartments without the hassle of dropping nuts, connections, or tools at the bottom of the boat. This easy-to-use product allows batteries to be removed in seconds and 36V series systems to be hooked up within a snap, easily and correctly every time.Once Connect-Ease's products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug & play connections 8-gauge marine-grade wire with heat-shrinkable butt splices Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved Made in the USA  

Read more less

24V Trolling Motor Connection SystemThis easy-to-use 24V quick-connect-disconnect system keeps serious fishing enthusiasts on the water longer.The perfect 24V series trolling motor and battery connection. For those who want the ability to disconnect, remove, or replace batteries quickly without removing on-board charging systems, Connect-Ease’s system correctly connects batteries in series every time.Installation:Once Connect-Ease’s products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Easily replace batteries in tight compartments without dropping nuts, connections, or tools at the bottom of the boat. This easy-to-use system allows batteries to be removed in seconds and 24V systems to be hooked up easily and correctly every time. Connect-Ease’s multi-bank on-board charging leads are the perfect connection for the best performance from high-output trolling motors. Keep spare batteries with Connect-Ease’s additional 12V battery easy connections.Install in seconds for quick battery replacement for extra-long days, weekends, or tournaments on the water.Features: Plug-and-play connections are lithium-compatible Features 8-gauge wire and onboard charging leads, bringing a quick and easy installation and powerful, proven performance to any 24V trolling motor installation Lithium-compatible and the best power connection for 60–120-amp lithium batteries and any brand/model 24V trolling motor Integrated charging leads Makes rigging and battery removal foolproof One-year warranty Saltwater approved Made in the USA

Read more less

36V Standard Trolling Motor SystemToday’s high-output trolling motors require good power sources. This easy-to-use system is designed for those who take their fishing seriously.Easy battery removal and replacement from tight boating compartments now only takes seconds and no tools are needed.Created for the sportsman who wants to easily connect, replace, or just disconnect their 36-volt marine battery systems from tight boat compartments in seconds. This connection kit keeps trolling motor connections intact, whether the batteries are connected or out of the boat.Connect-Ease's patented system takes the hassle and frustration out of remembering how to connect 36-volt trolling motors with the proper 36-volt series for battery hookups. The product features corrosion-free connections and provides the voltage vital for marine equipment performance and longevity.Once Connect-Ease's products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug & play connections 8-gauge marine-grade wire with heat-shrinkable butt splices Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved Made in the USA

Read more less

Ultrex Lift Assist Cylinder for 80LB Motors with 45” Shaft LengthThese replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ and Humminbird® MEGA 360 Imaging™ reduces the effort required for motor stow and deploy replaces the factory standard lift assist cylinder Designed for 24V, 80lb Ultrex™ motors with a shaft length of 45"

Read more less

MKR-US2-15 Lowrance 8-Pin Tripleshot ADP for Hook2Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Hook2 fish finder with a Universal Sonar 2 transducer on your trolling motor.Features:Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Weedless Wedge™ Props (MKP-7) The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter:   3 - 5 / 8"Prop Nut Kit:        "A" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKR-DSC-15 DSC Transducer Adapter Cable - Lowrance® 8-PINThe adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in dual-spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

MKR-DSC-12 DSC Transducer Adapter Cable - Garmin® 4-PINThe adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

Prop & Nut Kits "A" (MKP-9) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota® prop dimensions (3/8", 1/2" and 5/16"). Includes prop nut and washer. Requires a crescent wrench for installation. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKA-60 Stabilizer KitReduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use.Features: Reduces motor bounce in the stowed position Absorb vibrations to protect the motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removable, it leaves only a low-profile base Stabilizer shafts can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon

Read more less

Weedless Wedge™ 2 Props (MKP-33) Minn Kota®s exclusive prop is the only of its kind that is 100 percent weedless. Unique design features swept-back and flared blades to "wedge" weeds away while conserving battery power. Moves through heavy vegetation, even at slow speeds. Motor Diameter:   4"Prop Nut Kit:        "E" Fits Motor Models With Serial Number Prefix "WW"TERROVA 80, TERROVA 80/US2, TERROVA 80/AP, TERROVA 80/AP/US2, TERROVA 101, TERROVA 101/US2, TERROVA 101/AP, TERROVA 101/AP/US2, MAX 80, MAX 80/BG /US2, MAX 80/US, MAX 80/H/3X, MAX 101, MAX 101/US, MAX 101/h, MAX 101/H/3X, MAX PRO 80, MAX PRO 80/BG /US2, MAX PRO 80/US, MAX PRO 101, MAX PRO 101/BG /US2, MAX PRO 101/US, MAX 80T, MAX 80/H, 80PD, 80PD/AP, 80PD/US, 80PD/AP/US, VECTOR 80/3X, VECTOR 101/3X, VANTAGE 80, VANTAGE 101, RT80/ST /CP, RT80/ST/CP/AP, RT101/ST/CP/AP, RT PRO 80, RT PRO 101, RT80/SM/L&D, RT80/SM/BG, RT80SM/BG/3X, RT80/SM/L&D/3X, RT101/SM/BG, RT101/SM/BG/3X, RT80/B, RT80/B/L&D, RT80/B/3X, RT80/B/L&D/3X, RT80/S, RT80/S/3X, RT101/B, RT101/B/3X, RT 101/S, RT101/S/3X, RT80/AP, MK80EM, MK101EM, MK160EM, MK202EM, RT 80EM, RT 101EM, RT 160EM, RT 202EM, RT101/SF, RT80/SF, FORTREX 101/US2, FORTREX 101, FORTREX 80/US2, FORTREX 80, TRAXXIS 80WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

lil' Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hp Locks "down" for trolling, "up" for cruising Made of highest quality polycarbonates with stainless steel hardware Owner's Manual (pdf)

Read more less