Swivel Nut Strainer - 1/2" Barb Inlet - Clear BowlClean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PIRANHA™ Angled Port Aerator 600 Livewell Pump - 12 VDC, 600 GPHSmart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO Livewell Pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning. Features: Submersible Anti-Airlock Removable Cartridge High Density Nylon Housing Heavy Duty Water Cooled Motor Includes Hex Nut & Washer Ignition Protected ISO 8846 2 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Hour: 600 GPH Volts: 12v Box Dimensions: 3"H x 9"W x 10"L WT: 1.5 lbs UPC: 752324006991

Read more less

Caged Automatic Float Switch - 12/24 VDCThe SHURFLO series float switches provide the ultimate in reliability for your boat. Features: 3' Tinned Wire Assembly Non-Mercury Remote or Direct Mounting Ignition Protected 3 Year Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 4"H x 7"W x 9"L WT: 0.7 lbs UPC: 752324010622

Read more less

SLV Fresh Water Pump - 12 VDC - 1.0 GPMThis compact automatic demand pump offers durability and dependability making it ideal for low volume, intermittent duty applications. The SLV Pump self-primes up to 2.5 vertical feet while delivering over 1.0 GPM. A 12 volt low power consumption motor, equipped with a thermal protector and long life pressure switch rated to 30 PSI, provides high pump performance and reliability.Features: Single-Fixture 12 VDC Self-Priming Run Dry Capability 30 PSI Shut-Off Pressure Long Life Pressure Switch This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 30 Gallons Per Minute: 1 GPM Box Dimensions: 3"H x 6"W x 10"L WT: 1.6 lbs UPC: 752324011278

Read more less

Replacement Blade for Chinook with Rocker Switch - BlackReplacement Blade specifically for Chinook with Rocker Switch.Color: Black

Read more less

Ultimate 757 24V 2-Speed 7" Fan - Direct Wire - WhiteDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 24V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

Ultimate 747 24V 2-Speed 7" Fan with Lighter Plug - WhiteCaframo's most popular marine fan. FingerSafe blade allows for maximum airflow. Two-speed options.Industry recognized and a long-time favorite of sailors! The model 747 Ultimate 24 Volt DC fan is recognized by Practical Sailor magazine as a "Best Buy" in the marine market. It features a Fingersafe blade that does not require a protective grill and has a shock-absorbing leading edge that flexes when it is stopped. The resulting maximum airflow makes the 747 Ultimate the top choice for sailors heading to hot, humid climates.Features: Two speeds Comes with two mounting options (permanent or removable suction cup) Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

Service KitJabsco Service Kit is for Manual 29090 and 29120 Series Toilets from 1998-2007.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 3"H x 6"W x 7"L WT: 0.4 lbs UPC: 671880524131

Read more less

Flush Pro Valve Kit - 5/8"Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 5/8" Hose Sizes Kit Includes:Water Inlet Fitting (Part #0499) Owner's Manual (pdf)

Read more less

Impeller KitMaterial:NeopreneDrive Type:Double Flat DriveNumber of Blades:12Dimensions: Diameter:3-3/4" Shaft Width:1" Shaft Diameter:3-9/16" Insert Material:PlasticJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:12Dimensions: Diameter:2-1/4" Shaft Width:1-1/4" Shaft Diameter:5/8"Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Hose AdapterPerfect solution to remove that unsightly hose bib deck fitting and rusty knob. This will enable you to connect your water hose in seconds.Enables you to quick-connect your water hose in seconds. Position this fitting close to your anchor windlass to clean muddy anchors, or locate one on each side of your vessel to make cleanups much easier. Combine the deck washdown fitting with a hose coil washdown hose and keep the deck clutter free.Features: Extra 3/4" GHT male hose adaptor suitable for HoseCoil Water flow available with an easy twist of the fitting Easy to install Position this fitting close to your anchor windlass to clean those muddy anchors. Or locate one on each side of your vessel to make those cleanups much easier Just combine the Quick Release Deck Washdown fitting with a Hose Coil Washdown hose and a high volume Jabsco PAR-Max 4 Washdown pump to keep the deck clutter free Comes with a pre-installed check valve that connects your hose with a simple twist to the deck fitting, even under full pressure Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 8"W x 8"L WT: 0.3 lbs UPC: 671880550253

Read more less

iL200 Plus In-Line & Submersible Pump 12VCentrifugal submersible and inline pump; Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Bait tank aeration, diesel transfer, water transfer Water Systems to 80°C Continuous rating but should not be run dry for long periods Specifications Output:tup to 12.7 litres/minute at up to .75bar (2.8 gallons/minute at 11psi) Connections:t1/2" (12.7mm) Hose Dimensions (L x H):t142 x 38 (mm) Amp Draw:t2.5 (amp) Weight:t260 (g) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2.8 GPM Volts: 12v Type: Electric Box Dimensions: 3"H x 9"W x 14"L WT: 1 lbs UPC: 042237109866 Owner's Manual (pdf)

Read more less

Float Switch w/CoverPart #: 4201-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features: 36" Wire 12V and 24V CE Rated Includes Cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 2"H x 6"W x 9"L WT: 0.5 lbs UPC: 022697420176 Quick Guide (pdf)

Read more less

Par-Max Shower Drain/General Purpose Pump - 3.5GPM-25psi-12VDC with StrainerLong-life fully serviceable shower drain pump.Features: 3.5 GPM (13.2 lpm) at 3ft (1m) head Self-priming up to 10ft (3m) allows mounting above wet bilges Diaphragm design allows extended dry running Continuous rated, heavy duty motor sealed for harsh bilge environments Thermal overload protection automatically stops the motor if it overheats due to overloading, with an auto re-start feature Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 8849 MARINE (Bilge Pump Standard) Complete with Pumpgard Oil resistant elastomers Fitting: Connections for 3/4" (19mm ) ID hose Size: 7.7" long x 4.2" wide x 4.1" high (19.6cm x 10.6cm x 10cm) Weight: 5.0lb (2.1kg) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 3.5 GPM Max PSI: 25 Volts: 12v Box Dimensions: 5"H x 7"W x 14"L WT: 6.5 lbs UPC: 671880595667 Owner's Manual (pdf)

Read more less

Perko 1-1/4" Thru-Hull Connection f/ use with Hose BronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumTechnical Information Regular Length - Plain Bronze: Hose Size Inches: 1-1/4 Mounting Hole Diameter Inches: 1-5/8 Maximum Hull Thickness Inches: 1-7/8 O.D. Flange Inches: 2-3/4 Model Number: 0350007DPP Ship Weight: 6.6/12.6 lbs. Made in the USA Specifications: Hose Size: 1-1/4" Material: Bronze Box Dimensions: 2"H x 2"W x 6"L WT: 1.25 lbs UPC: 085226028366

Read more less

Perko 1-1/2" Thru-Hull Connection f/ use with Hose Chrome Plated BronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumTechnical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 1-1/2 Mounting Hole Diameter Inches: 1-7/8 Maximum Hull Thickness Inches: 1-7/8 O.D. Flange Inches: 3-1/8 Model Number: 0350008DPC Ship Weight: 8.2/16.1 lbs. Made in the USA Specifications: Hose Size: 1-1/2" Material: Bronze Box Dimensions: 3"H x 3"W x 5"L WT: 1.5 lbs UPC: 085226036156

Read more less

Perko 1" Thru-Hull Connection f/ use with Hose Chrome PlatedBronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumTechnical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 1 Mounting Hole Diameter Inches: 1-5/16" Maximum Hull Thickness Inches: 1-3/4" O.D. Flange Inches: 2-1/4" Model Number: 0350006DPC Ship Weight: 4.6/8.4 lbs. Made in the USA Specifications: Hose Size: 1" Material: Bronze Box Dimensions: 2"H x 2"W x 6"L WT: 0.8 lbs UPC: 085226036095

Read more less

Perko 5/8" Thru-Hull Connection f/ use with Hose Chrome PlatedBronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumTechnical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 5/8 Mounting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-1/16 O.D. Flange Inches: 1-1/2 Model Number: 0350004DPC Ship Weight: 1.9/3.3 lbs. Made in the USA Specifications: Hose Size: 5/8" Material: Bronze Box Dimensions: 1"H x 1"W x 4"L WT: 0.15 lbs UPC: 085226036019

Read more less

Perko 1-1/2" Thru-Hull Fitting w/ Pipe Thread BronzeFlange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8 inch from flange.Cast bronze.Technical Information: Pipe Size Inches: 1-1/2 Mouting Hole Diamete Inches: 1-7/8 Maximum Hull Thickness Inches: 2-1/4 O.D. Flange Inches: 3 Model Number: 0322DP8PLB Ship Weight: 7.6/15.0 lbs. MADE IN THE USA Specifications: Hose Size: 1-1/2" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 1.45 lbs UPC: 085226028496

Read more less

Perko 1-1/4" Thru-Hull Fitting w/ Pipe Thread BronzeFlange is machined to fit hull and grooved to retain bedding compound. Neckis threaded to approximately 3/8 inch from flange.Cast bronze.Technical Information: Pipe Size Inches: 1-1/4 Mouting Hole Diamete Inches: 1-5/8 Maximum Hull Thickness Inches: 2 O.D. Flange Inches: 2-3/4 Model Number: 0322DP7PLB Ship Weight: 6.0/29.4 lbs. MADE IN THE USA Specifications: Hose Size: 1-1/4" Material: Bronze Box Dimensions: 2"H x 3"W x 6"L WT: 1.15 lbs UPC: 085226035975

Read more less

Impeller Removal Tool1-9/16" to 2-9/16" (40mm - 65mm)Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Impeller Removal Tool2-9/16" to 4-5/8" (65mm - 118mm)Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

iL500 Plus Pump Kit 12vFlow rate to 7 USgallons/minPressure up to 14 psiFeatures: Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Water transfer, deck shower, or deck wash Continuous rating but should not be run dry for long periods Includes Spray Nozzle, 4m cable with battery clips, 4m layflat hose. WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 7 GPM Reversible: No Volts: 12v Box Dimensions: 3"H x 10"W x 14"L WT: 2.3 lbs UPC: 042237109897 Owner's Manual (pdf)

Read more less

Conversion KitConvert Jabsco manual toilet compact and regular bowl models to full electric operation without the need to alter existing inlet or discharge seacocks. Also converts most toilets with 4 bolt screw pattern on a 3-3/4" diameter bolt circle such as Graco, Raritan, Wilcox Crittenden, Mansfield and Sealand Push button flushing for ease and simplicity of operation Comprehensive kit has all necessary parts, including flushing pump, macerator pump, switch, adaptors, clamps hose and fastening Flushing pump self-priming up to 4ft vertical lift May be installed 3ft below the waterline For installations fitted with vented loops use a solenoid valve on inlet hose Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) Fitting:Connections for 5/8" - 3/4" ID inlet hose, 1" - 1-1/2" ID outlet HoseSize: 13-1/4" long x 8-1/4" wide x 3-1/4" highWARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Inlet Size: 5/8" or 3/4" Outlet Size: 1" or 1-1/2" Suction Lift (ft.): 4' Volts: 12v Type: Misc Box Dimensions: 4"H x 9"W x 15"L WT: 8 lbs UPC: 671880032414 Owner's Manual (pdf)

Read more less

Engine Oil Changer Oil Drain PumpPolished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser.Features: Screws onto threaded male 3/4" garden hose (GHT) fitting on top of dipstick tube. Gives simple "one-hand" pumping Complete with 2ft of 1/2" ID drain hose WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less