DIN Rail Mounting Kit for NDC-5, EMU-1-BAS & NBF-3-BAS on Top Hat or G Section RailsThe kit is suitable for use with a top-hat-rail, type EN 50 022, or a G section, type EN 50 035.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:Type: Mounting Brackets

Read more less

Rear Panel Mount NMEA2000 Wired Micro 5-Pin - MalePanel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead/panel.The female panel mount wired connector can easily replace any of the existing ‘drop’ glands on the Actisense QNB-1 to create a quick pluggable NMEA 2000 connection option.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications:Electrical Rated Current - 4A Rated Voltage - 60VDC Mechanical Contacts - Brass, gold-plated Contact Carrier - Nylon & GF Contact Polarization - Standard M12-"A"-Polarization Mating Thread - M12 Housing - Brass, nickel-plated Mounting Thread - PG9 Mounting Nut - Brass, nickel plated - PG9 Mounting Hole Diameter - 15.3mm Wires - 18 AWG (stripped and tinned) Wire Jacket - PVC Weight - 20g Approvals and Certifications Protection - IP67 (when mated) Operating Temperature - -25°C to +90°C Connector Specification - Meets IEC61076-2-101 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): N/A Connection Gender: Male Data Interface: NMEA 2000 Owner's Manual (pdf)Brochure (pdf)

Read more less

Rear Panel Mount NMEA2000 Wired Micro 5-Pin - FemalePanel-mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead/panel.The female panel mount wired connector can easily replace any of the existing ‘drop’ glands on the Actisense QNB-1 to create a quick pluggable NMEA 2000 connection option.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.Technical Specifications:Electrical Rated Current - 4A Rated Voltage - 60VDC Mechanical Contacts - Brass, gold-plated Contact Carrier - Nylon & GF Contact Polarization - Standard M12-"A"-Polarization Mating Thread - M12 Housing - Brass, nickel-plated Mounting Thread - PG9 Mounting Nut - Brass, nickel plated - PG9 Mounting Hole Diameter - 15.3mm Wires - 18 AWG (stripped and tinned) Wire Jacket - PVC Weight - 20g Approvals and Certifications Protection - IP67 (when mated) Operating Temperature - -25°C to +90°C Connector Specification - Meets IEC61076-2-101 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): N/A Connection Gender: Female Data Interface: NMEA 2000 Owner's Manual (pdf)Brochure (pdf)

Read more less

NMEA2000 Micro Terminator - MaleActisense terminators are exceptionally robust, designed to withstand the harsh conditions of the marine environment, and are easy to install.Each NMEA 2000 installation must have precisely two termination resistors installed, one at each end of the backbone, to ensure proper operation and signal integrity.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledgeTechnical Specifications:Electrical Rated Voltage (power pair) - 60VDC Rated Current - 4A Internal Termination Resistors - 120 Ω ± 1% 500mW Mechanical Male Contact - Brass, gold plated Contact Carrier - PA66 (30% Glass filled), black Contact Polarization - Standard M12 -“A”- polarization Mating Thread - M12 Screw Cap - Brass, nickel plated O-Ring Seal - Rubber, Black Housing - PVC, black Weight - 15g Approvals and Certifications Protection - IP67 (when mated) Operating Temperature - -25°C to +70°C Storage Temperature - -40°C to +85°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): N/A Connection Gender: Male Data Interface: NMEA 2000 Owner's Manual (pdf)Brochure (pdf)

Read more less

NMEA2000 Micro Terminator - FemaleActisense terminators are exceptionally robust, designed to withstand the harsh conditions of the marine environment, and are easy to install.Each NMEA 2000 installation must have precisely two termination resistors installed, one at each end of the backbone, to ensure proper operation and signal integrity.The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledgeTechnical Specifications:Electrical Rated Voltage (power pair) - 60VDC Rated Current - 4A Internal Termination Resistors - 120 Ω ± 1% 500mW Mechanical Female Contact - Phosphor bronze, gold plated Contact Carrier - PA66 (30% Glass filled), black Contact Polarization - Standard M12 -“A”- polarization Mating Thread - M12 Screw Cap - Brass, nickel plated O-Ring Seal - Rubber, Black Housing - PVC, black Weight - 15g Approvals and Certifications Protection - IP67 (when mated) Operating Temperature - -25°C to +70°C Storage Temperature - -40°C to +85°C This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): N/A Connection Gender: Female Data Interface: NMEA 2000 Owner's Manual (pdf)Brochure (pdf)

Read more less

RJ45 Waterproof Ethernet Connector for NDC-5RJ45 Field-Fit Ethernet connector.Allows for complete customization of Ethernet network cabling lengths, reducing cost, waste, and the overall weight of your boat.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

DIN Rail Mounting Kit f/Use w/USG-2 on Top Hat or G Section Rails - 1 Clip, 2 ScrewsFor use with the USG-2 (Hydra case)The kit is suitable for use with a top-hat-rail, type EN 50 022 or a G section, type EN 50 035.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:Type: Mounting Brackets

Read more less

Universal Strain Relief BracketThis strong stainless steel strain relief bracket ensures neat installation and tidy cables by securing any loose cables directly to the bulkhead.Perfect for the installation of the Actisense PRO-Range products; however, its smart design is ideal for any strain relief application.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:Type: Misc

Read more less

Pluggable Screwless Connector Pack for PRO-NCD-1E/1E2KConnector pack for the PRO-NDC-1E. Allows for simple screwless connection of wiring from inputs and outputs.This pack is suitable for use with PRO-NDC-1E and PRO-NDC-1E2K.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:Type: Parts

Read more less

9-Pin, D-Type Molded Cable Assembly - Female9-pin, D-type molded cable assembly.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pluggable Screwless Connector Pack for PRO-NBF-1Connector pack for the PRO-NBF-1. Allows for simple screwless connection of wiring from inputs and outputs.This pack is suitable for use with PRO-NBF-1.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:Type: Parts

Read more less

Spare Shielded Cable for Connecting USB-2 to PCUSB cable accessory for use with the Actisense USG-2.*Note: The USG-2 ships with this cable included in the box, but it is also available as an accessory in case a replacement is needed.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:Type: Cables

Read more less