Airmar TM265C Low/Medium CHIRP Transom Mount Transducer with Raymarine 11-Pin Mix-N-Match CableModel: TM265C-LM-11R Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz, 25 deg to 16 deg port-starboard beamwidt, Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz, 16 deg to 11 deg beamwidth, Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Transom mount stainless steel bracket for installation on boats of all propulsion types SEALCASTTM, seamless, urethane housing for long life in the water Patented Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) Medium Frequency 85-135 kHz (16 deg-11 deg) Cable-Length 10 m (33 feet) Housing Urethane/Stainless Bracket Mounting Style Transom Power Rating 1 kW Single or Dual Frequency CHIRP-Ready Dual-Band Transducer Functions Depth, Temperature Transom Angle 3 deg to 21 deg What's in the Box: TM265C-LM-MM Transom Mount Hardware MMC-11R-LDB Cable

Read more less

Airmar TM265C Low/Medium CHIRP Transom Mount Transducer with Bare Wire Mix-N-Match CableModel: TM265C-LM-0 Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz, 25 deg to 16 deg port-starboard beamwidt, Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz, 16 deg to 11 deg beamwidth, Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Transom mount stainless steel bracket for installation on boats of all propulsion types SEALCASTTM, seamless, urethane housing for long life in the water Patented Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) Medium Frequency 85-135 kHz (16 deg-11 deg) Cable-Length 10 m (33 feet) Housing Urethane/Stainless Bracket Mounting Style Transom Power Rating 1 kW Single or Dual Frequency CHIRP-Ready Dual-Band Transducer Functions Depth, Temperature Transom Angle 3 deg to 21 deg What's in the Box: TM265C-LM-MM Transom Mount Hardware MMC-0 Cable

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Mix-N-Match ConnectorModel: B265C-LM-MM Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit"

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Navico Blue 7-Pin Y- Mix-N-Match CableModel: B265C-LM-BL2 Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-BL2 Cable"

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Navico 9-Pin mix-N-Match CableModel: B265C-LM-9N2 Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-P2N Cable"

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Garmin 12-PinMix-N-Match CableModel: B265C-LM-12G Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-12G Cable"

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Furuno 12-Pin Mix-N-Match CableModel: B265C-LM-12F Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-12F Cable"

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Raymarine 11-Pin Mix-N-Match CableModel: B265C-LM-11R Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-11RLDB Cable"

Read more less

Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Bare Wire Mix-N-Match CableModel: B265C-LM-0 Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25 deg to 16 deg beamwidth - Maximum depth of 914 m (3000 feet) Medium frequency: 85 to 135 kHz - 16 deg to 11 deg beamwidth - Maximum depth of 457 m (1500 feet) 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID(R) technology Hull Type: Fiberglass or wood Exclusive Xducer ID(R) technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000 feet). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).SpecificationsCable-Length10 m (33 feet) Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Max Deadrise Up to 20 deg with fairing Max Deadrise Angle 20 deg Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75) What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-0 Cable"

Read more less

Airmar PM265-LH TransducerLow/High CHIRPModel: 41-542-4-01 8 Internal Ceramic Assemblies Depth & fast Response Water Temperature Sensor Chirp Technology L/H Frequencies 1 kW Bronze Transducer Housing Hull Type: Fiberglass Flat Edge Design for Pocket/Keel Mount Installation Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000 feet) with 5 to 10 times greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 103 kHz of total bandwidth in just one installation, saving customers time and money.A pocket/keel mount model in the Chirp Thru-Hull product line, the PM265 L/H Chirps across the following bandwidths:L/H Model - Low Frequency 42-65 kHz, High Frequency 130-210 kHzSpecificationsHull deadriseN/A Acoustic window Urethane Weight 5.2 kg (11.465 lb)

Read more less

Airmar M265C Depth Only Low Medium In-Hull Transducer with Raymarine 11-pin Connector, Low Dual-Band Mix--N-Match CableModel: M265C-LM-11R Depth only 1 kW of power for great, deep to mid-depth performance Low frequency: 42 kHz to 65 kHz Medium frequency: 85 kHz to 135 kHz 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Plastic transducer housing and mounting tank Patented Xducer ID(R) technology The M265LM Chirp-ready in hull is a perfect mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band of 42 to 65 kHz provides deep-water performance down to 914 m (3000 feet).It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band, operating between 85 and 135 kHz, is excellent for identifying targets suspended close to the bottom on structure and within the water column.The transducer is installed in the included tank which is cut to the boat's deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M265LM is a popular choice for customers not wanting to drill a hole in their hull and for trailered or lifted boats.SpecificationsAcoustic WindowUrethane Cable-Length 9 m (30 feet) Connector Airmar 12-Pin (MMC) Deadrise Range 0 deg to 22 deg Display Connector MMC-11R-LDB Raymarine 11-pin Connector, Low Dual-Band Frequency Band Low-Medium Housing Material Plastic Hull Material Solid fiberglass only Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Max Deadrise Accommodates a deadrise angle up to 30 deg with the longest side of the tank installed parallel to the centerline (keel) of the hull Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Max Vessel LOA 11 m (36 feet) and above Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Mounting Style In-Hull Power Rating 1 kW Single or Dual Frequency CHIRP-Ready Dual-Band Transducer Functions Depth Dimensions 8.19in H x 8.71in L x 6.02in W What's in the Box: M265C-LM-MM MMC-11R-LDB Raymarine 11-pin Connector, Low Dual-Band

Read more less

Airmar M265C Depth Only Low Medium In-Hull Transducer with Bare Wire Mix-N-Match CableModel: M265C-LM-0 Depth only 1 kW of power for great, deep to mid-depth performance Low frequency: 42 kHz to 65 kHz Medium frequency: 85 kHz to 135 kHz 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Plastic transducer housing and mounting tank Patented Xducer ID(R) technology The M265LM Chirp-ready in hull is a perfect mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band of 42 to 65 kHz provides deep-water performance down to 914 m (3000 feet).It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band, operating between 85 and 135 kHz, is excellent for identifying targets suspended close to the bottom on structure and within the water column.The transducer is installed in the included tank which is cut to the boat's deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M265LM is a popular choice for customers not wanting to drill a hole in their hull and for trailered or lifted boats.SpecificationsAcoustic WindowUrethane Cable-Length 9 m (30 feet) Connector Airmar 12-Pin (MMC) Deadrise Range 0 deg to 22 deg Display Connector MMC-0 Bare Wire Frequency Band Low-Medium Housing Material Plastic Hull Material Solid fiberglass only Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Max Deadrise Accommodates a deadrise angle up to 30 deg with the longest side of the tank installed parallel to the centerline (keel) of the hull Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Max Vessel LOA 11 m (36 feet) and above Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Mounting Style In-Hull Power Rating 1 kW Single or Dual Frequency CHIRP-Ready Dual-Band Transducer Functions Depth Dimensions 8.19in H x 8.71in L x 6.02in W What's in the Box: M265C-LM-MM MMC-0

Read more less

Airmar M265C-LH Low High CHIRP In-Hull Transducer with Garmin 12-PinModel: M265C-LH-12G Depth only 1 kW of power for great deep-water performance Low frequency: 42 to 65 kHz, 25 deg to 16 deg beamwidth, Maximum depth of 914 m (3000 feet) High frequency: 130 to 210 kHz, 10 deg to 6 deg beamwidth, Maximum depth of 304 m (1000 feet) 103 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Plastic transducer housing and mounting tank Patented Xducer ID(R) technology We know that specific frequencies excel at detecting certain species of fish: Bluefin Tuna-60 kHz, squid-133 kHz, and cod-175 kHz. The M265LH transducer includes all these frequencies plus every other frequency in the high and low bandwidths. This powerhouse delivers excellent resolution, bottom discrimination, and bait and game-fish separation at all depths.Airmar's M265LH is packed with a seven-element, low-frequency array that operates between 42 and 65 kHz for excellent deep-water performance. The high-frequency ceramic operates between 130 and 210 kHz with a narrow, 10 deg to 6 deg, bandwidth-perfect for picking apart structure and pinpointing tight-holding fish in structure.The transducer is installed in the included tank which is cut to the boat's deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M265LH is a popular choice for customers not wanting to drill a hole in their hull and for trailered or lifted boats.SpecificationsCable-Length10 m (33 feet) Connector Garmin 12-Pin Deadrise Range 0 deg to 22 deg Frequency Band Low-High Housing Material Plastic Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Max Deadrise Accommodates a deadrise angle up to 30 deg with the longest side of the tank installed parallel to the centerline (keel) of the hull Max Depth Low frequency- 914 m (3000 feet), High frequency- 304 m (1000 feet) Mounting Style In-Hull Single or Dual Frequency CHIRP-Ready Dual-Band High Frequency 130-210 kHz High Frequency Beamwidth 10 deg-6 deg

Read more less

Airmar M265C Depth Only Low Medium In-Hull Transducer with Navico Dual 7-Pin BL, Y-Cable - 1m Mix--N-Match CableModel: M265C-LM-BL2 Depth only 1 kW of power for great, deep to mid-depth performance Low frequency: 42 kHz to 65 kHz Medium frequency: 85 kHz to 135 kHz 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Plastic transducer housing and mounting tank Patented Xducer ID(R) technology The M265LM Chirp-ready in hull is a perfect mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band of 42 to 65 kHz provides deep-water performance down to 914 m (3000 feet).It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band, operating between 85 and 135 kHz, is excellent for identifying targets suspended close to the bottom on structure and within the water column.The transducer is installed in the included tank which is cut to the boat's deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M265LM is a popular choice for customers not wanting to drill a hole in their hull and for trailered or lifted boats.SpecificationsAcoustic WindowUrethane Cable-Length 9 m (30 feet) Connector Airmar 12-Pin (MMC) Deadrise Range 0 deg to 22 deg Display Connector Navico Dual 7-Pin BL, Y-Cable - 1m Mix-n-Match Cable Frequency Band Low-Medium Housing Material Plastic Hull Material Solid fiberglass only Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Max Deadrise Accommodates a deadrise angle up to 30 deg with the longest side of the tank installed parallel to the centerline (keel) of the hull Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Max Vessel LOA 11 m (36 feet) and above Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Mounting Style In-Hull Power Rating 1 kW Single or Dual Frequency CHIRP-Ready Dual-Band Transducer Functions Depth Dimensions 8.19in H x 8.71in L x 6.02in W What's in the Box: M265C-LM-MM Navico Dual 7-Pin BL, Y-Cable - 1m Mix-n-Match Cable

Read more less

Airmar M265C Depth Only Low Medium In-Hull Transducer with Navico 9-Pin Y-Cable - 1m Mix--N-Match CableModel: M265C-LM-9N2 Depth only 1 kW of power for great, deep to mid-depth performance Low frequency: 42 kHz to 65 kHz Medium frequency: 85 kHz to 135 kHz 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Plastic transducer housing and mounting tank Patented Xducer ID(R) technology The M265LM Chirp-ready in hull is a perfect mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band of 42 to 65 kHz provides deep-water performance down to 914 m (3000 feet).It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band, operating between 85 and 135 kHz, is excellent for identifying targets suspended close to the bottom on structure and within the water column.The transducer is installed in the included tank which is cut to the boat's deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The M265LM is a popular choice for customers not wanting to drill a hole in their hull and for trailered or lifted boats.SpecificationsAcoustic WindowUrethane Cable-Length 9 m (30 feet) Connector Airmar 12-Pin (MMC) Deadrise Range 0 deg to 22 deg Display Connector Navico 9-Pin Y-Cable - 1m Mix-n-Match Cable Frequency Band Low-Medium Housing Material Plastic Hull Material Solid fiberglass only Low Frequency 42-65 kHz Low Frequency Beamwidth 25 deg-16 deg Max Deadrise Accommodates a deadrise angle up to 30 deg with the longest side of the tank installed parallel to the centerline (keel) of the hull Max Depth Low frequency- 914 m (3000 feet), Medium frequency- 457 m (1500 feet) Max Vessel LOA 11 m (36 feet) and above Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16 deg-11 deg Mounting Style In-Hull Power Rating 1 kW Single or Dual Frequency CHIRP-Ready Dual-Band Transducer Functions Depth Dimensions 8.19in H x 8.71in L x 6.02in W What's in the Box: M265C-LM-MM Navico 9-Pin Y-Cable - 1m Mix-n-Match Cable

Read more less

B265LH Bronze Chirp Thru Hull 1kW with Fairing BlockRequires Mix and Match CableImagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fish separation at all depths. The B265LH is packed with a seven-element, low-frequency array that operates at anywhere between 42 kHz and 65 kHz. It has a wide, 25° beam that will adjust by several degrees as the frequency is tuned up or down the band. The single, high-frequency ceramic operates at any frequency between 130 kHz and 210 kHz and has a narrow, 6° beam that is adjustable by several degrees. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, Chirp Broadband Transducer Technology.Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° port-starboard beamwidth High—CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth 103 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Bronze transducer housing with High-Performance Fairing Boat Size: 8 m (25’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Thru-Hull Chirp: Low/High Box Dimensions: 7"H x 18"W x 26"L WT: 23.2 lbs UPC: 801769001419

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Garmin 12-Pin Mix-n-Match CableModel: B175C-12-MW-12G Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Furuno 12-Pin Mix-n-Match CableModel: B175C-12-MW-12F Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Raymarine 11-Pin Mix-n-Match CableModel: B175C-12-MW-11R Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Bare wire Mix-n-Match CableModel: B175C-12-MW-0 Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.****************************************************************** As of 05/29/2024 the bare wire only works with the Garmin GSD28 ******************************************************************SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - requires Mix-N-Match CableModel: B175C-0-MW-MM Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match "

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Humminbird 9-Pin Mix-n-Match CableModel: B175C-0-MW-HB Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-HB 9-Pin Humminbird Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Garmin 8-Pin Mix-n-Match CableModel: B175C-0-MW-8G Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-8G 8-Pin Garmin Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Humminbird 14-Pin Mix-n-Match CableModel: B175C-0-MW-14HB Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-14HB 14-Pin Humminbird Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Garmin 12-Pin Mix-n-Match CableModel: B175C-0-MW-12G Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-12G 12-Pin Garmin Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - requires Mix-N-Match CableModel: B175C-12-MW-MM Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match "

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Furuno 12-Pin Mix-n-Match CableModel: B175C-0-MW-12F Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-12F 12-Pin Furuno Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Raymarine 12-Pin Mix-n-Match CableModel: B175C-0-MW-12R Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-12RHM-Pin Raymarine Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Humminbird 9-Pin Mix-n-Match CableModel: B175C-12-MW-HB Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Garmin 8-Pin Mix-n-Match CableModel: B175C-12-MW-8G Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

Airmar B175MW Medium Ultra-Wide 0 deg Tilted ElementTM Thru-Hull - with Bare Wire Mix-n-Match CableModel: B175C-0-MW-0 Fixed 0 deg tilted version for 0 deg to 7 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.****************************************************************** As of 05/29/2024 the bare wire only works with the Garmin GSD28 ******************************************************************SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box: MMC-0 Bare Wire Mix-n-Match Cable B175C-0-MW-MM 0d Tilt Medium CHIRP Ultra Wide"

Read more less

Airmar B175MW Medium Ultra-Wide 12 deg Tilted ElementTM Thru-Hull - Humminbird 14-Pin Mix-n-Match CableModel: B175C-12-MW-14HB Fixed 12 deg tilted version for 8 deg to 15 deg hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted ElementTM Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.SpecificationsPower Rating1 kW Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 11 m (36 feet) Hole Size 95 mm (3-3/4) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30 feet) Max Depth 400 m (1300 feet) Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57 deg to 73 deg (Port/Starboard) X 16 deg average (Fore/Aft) Water Temperature -10 deg to 40 degC (14 deg to 104 degF) Cable End Mix-N-Match What's in the Box:B175C-12-MW-MM Medium Ultra-Wide Chirp

Read more less

B175 Medium Ultra-Wide 1kW 12-Degree 12-Pin Connector for GarminAirmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Features: Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300') Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Pins: 12-Pin Box Dimensions: 8"H x 10"W x 12"L WT: 9.9 lbs UPC: 801769019537

Read more less

Airmar TM265C Low/High CHIRP Transom Mount Transducer with Navico 7-Pin & Y-cable Mix-N-Match CableModel: TM265C-LH-BL2 8 Internal Broadband Ceramics Depth & fast response water temperature sensor Urethane housing and stainless steel mounting bracket Can retrofit to existing TM258 & TM260 bracket Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) High frequency 130-210 kHz (10 deg to 6 deg beamwidth) Boat Size 8 m to 12 m (25 feet to 40 feet) Boat type Outboards, I/O Hull type Fiberglass, Wood, Metal Hull Deadrise Up to 28 deg Acoustic Window Urethane What's in the Box: TM265CLH-MM Transom Mount Hardware MMC-BL2

Read more less

Airmar TM265C Low/High CHIRP Transom Mount Transducer with Mix-N-Match PlugModel: TM265C-LH-MM 8 Internal Broadband Ceramics Depth & fast response water temperature sensor Urethane housing and stainless steel mounting bracket Can retrofit to existing TM258 & TM260 bracket Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) High frequency 130-210 kHz (10 deg to 6 deg beamwidth) Boat Size 8 m to 12 m (25 feet to 40 feet) Boat type Outboards, I/O Hull type Fiberglass, Wood, Metal Hull Deadrise Up to 28 deg Acoustic Window Urethane What's in the Box: TM265CLH-MM Transom Mount Hardware

Read more less

Airmar TM265C Low/High CHIRP Transom Mount Transducer with Navico 9-Pin x 2 Mix-N-Match CableModel: TM265C-LH-9N2 8 Internal Broadband Ceramics Depth & fast response water temperature sensor Urethane housing and stainless steel mounting bracket Can retrofit to existing TM258 & TM260 bracket Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) High frequency 130-210 kHz (10 deg to 6 deg beamwidth) Boat Size 8 m to 12 m (25 feet to 40 feet) Boat type Outboards, I/O Hull type Fiberglass, Wood, Metal Hull Deadrise Up to 28 deg Acoustic Window Urethane What's in the Box: TM265CLH-MM Transom Mount Hardware MMC-9N2

Read more less

Airmar TM265C Low/High CHIRP Transom Mount Transducer with Raymarine 11-Pin Mix-N-Match CableModel: TM265C-LH-11R 8 Internal Broadband Ceramics Depth & fast response water temperature sensor Urethane housing and stainless steel mounting bracket Can retrofit to existing TM258 & TM260 bracket Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) High frequency 130-210 kHz (10 deg to 6 deg beamwidth) Boat Size 8 m to 12 m (25 feet to 40 feet) Boat type Outboards, I/O Hull type Fiberglass, Wood, Metal Hull Deadrise Up to 28 deg Acoustic Window Urethane What's in the Box: TM265CLH-MM Transom Mount Hardware MMC-11R

Read more less

Airmar TM265C Low/High CHIRP Transom Mount Transducer with Garmin 12-Pin Mix-N-Match CableModel: TM265C-LH-12G 8 Internal Broadband Ceramics Depth & fast response water temperature sensor Urethane housing and stainless steel mounting bracket Can retrofit to existing TM258 & TM260 bracket Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) High frequency 130-210 kHz (10 deg to 6 deg beamwidth) Boat Size 8 m to 12 m (25 feet to 40 feet) Boat type Outboards, I/O Hull type Fiberglass, Wood, Metal Hull Deadrise Up to 28 deg Acoustic Window Urethane What's in the Box: TM265CLH-MM Transom Mount Hardware MMC-12G

Read more less

Airmar TM265C Low/High CHIRP Transom Mount Transducer with Bare Wire Mix-N-Match CableModel: TM265C-LH-0 8 Internal Broadband Ceramics Depth & fast response water temperature sensor Urethane housing and stainless steel mounting bracket Can retrofit to existing TM258 & TM260 bracket Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fish finders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, Chirp uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fish finder.Specifically designed for small boats (25 feet-40 feet), the TM265LH Chirps across the following bandwidths:LH Model - Low Frequency 42-65 kHz/High Frequency 130-210 kHzSpecificationsLow frequency42-65 kHz (25 deg to 16 deg beamwidth) High frequency 130-210 kHz (10 deg to 6 deg beamwidth) Boat Size 8 m to 12 m (25 feet to 40 feet) Boat type Outboards, I/O Hull type Fiberglass, Wood, Metal Hull Deadrise Up to 28 deg Acoustic Window Urethane What's in the Box: TM265CLH-MM Transom Mount Hardware MMC-0

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount - Requires MMC CableModel: TM185C-MW-MM Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box:TM185MW Medium Ultra-Wide Chirp-ready Transom Mount

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount with MMC-8G Garmin 8-Pin MMC CableModel: TM185C-MW-8G Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box: TM185MW Medium Ultra-Wide Chirp-ready Transom Mount MMC-8G Garmin 8-Pin MMC Cable

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount with MMC-HB Humminbird 9-Pin MMC CableModel: TM185C-MW-HB Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box: TM185MW Medium Ultra-Wide Chirp-ready Transom Mount MMC-HB Humminbird 9-Pin MMC Cable

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount with MMC-14HBX Humminbird 14-Pin MMC CableModel: TM185C-MW-14HB Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box: TM185MW Medium Ultra-Wide Chirp-ready Transom Mount MMC-14HBX Humminbird 14-Pin MMC Cable

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount with MMC-12F Furuno 12-Pin MMC CableModel: TM185C-MW-12F Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box: TM185MW Medium Ultra-Wide Chirp-ready Transom Mount MMC-12F Furuno 12-Pin MMC Cable

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount with MMC-12G Garmin 12-Pin MMC CableModel: TM185C-MW-12G Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box: TM185MW Medium Ultra-Wide Chirp-ready Transom Mount MMC-12G Garmin 12-Pin MMC Cable

Read more less

Airmar TM185MW Medium Ultra-Wide Chirp-ready Transom Mount with MMC-0 Bare Wire MMC CableModel: TM185C-MW-0 Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300 feet) Medium frequency: 60-100 kHz 57 deg to 73 deg beamwidth (port/starboard) 16 deg average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Simple installation on transom of the boat Great performance at boat speeds below 30 knots Easy maintenance and low-cost replacement Exclusive Xducer ID(R) technology AIRMAR's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready TM185 Medium Ultra-Wide (MW) Transom Mount transducer. The TM185MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73 deg port-starboard to 16 deg average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar's new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz.The TM185MW Transom Mount is a 1 kW transducer housed in one of AIRMAR's most popular housings. Transom models are best suited for small and trailered vessels where a thruhull installation is not practical. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.SpecificationsPower Rating1 kW Transom Angle 2 deg to 22 deg Functions Depth, Temperature Acoustic Window Urethane Cable-Length 9 m (30 feet) Freq Med Wide 60-100 kHz Housing Urethane/Stainless Bracket Max Depth 400 m (1300 feet) Medium-Wide Beamwidth 57 deg to 73 deg beam p/s 16 deg average f/a Mounting Style Transom Single or Dual Frequency CHIRP-Ready Single-Band Weight 4.2 kg (9.2 lb.) What's in the Box: TM185MW Medium Ultra-Wide Chirp-ready Transom Mount MMC-0 Bare Wire MMC Cable

Read more less

Airmar SS175C-0-L 0d TiltModel: SS175C-0-L Depth & fast-response water-temperature sensor Low-CHIRPS from 40 kHz to 75 kHz, 32 deg to 21 deg beamwidth Available in 0 deg or 12 deg tilted versions only Covers popular fishing frequency of 50 kHz plus everything else in the bandwidth Steel transducer housing Exclusive Xducer ID(R) technology Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000 feet) with 5 to 10 times greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.This transducer is designed for smaller boats up to 36 feet (11 m).A tilted element model in the Chirp Thru-Hull product line, the SS175L Chirps across the following bandwidth:L Model - Low Frequency 40-60 kHzSpecificationsHull Deadrise0 deg to 7 deg hull deadrise Acoustic Window Urethane Weight 2.7 kg (6 lb) Boat Size Up to 8 m (25 feet) Hull Type Steel or aluminum

Read more less