12V Motor for Windlass V2This 12V motor is designed to power Lewmar's Windlass V2.

Read more less

Pro-Series Generation 3 Seals & Screws Kit Replacement seals and screws kit for Pro-Series Generation 3 windlasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual

Read more less

Pro-Series Generation 3 Motor Kit - 12V Replacement 12 V motor for Pro-Fish and Pro-Series windlasses.Compatible With:Pro-Fish and Pro-Series (700/1000) windlasses.*Sold as an Individual

Read more less

V1 Gypsy Only Fast Fit Deck Unit Replacement gypsy only Fast Fit deck unit for V1 Windlasses.Compatible With:V1 windlasses*Sold as an Individual

Read more less

Pro Series Seals, Dowels & Screws Kit Seals, Dowels, and Screws Kit for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Dowel 1/4" x 1 1/4" x three (3) Dowel, 6 x 30 mm x one (1) Dowel, 8 x 45 mm x one (1)  Socket HD cap screw 10-24UNC x 1 1/4" x six (6) Wiper seal x two (2) *Sold as an Individual 

Read more less

Pro-Series Bearings Kit - 2nd GenerationBearing kit for Generation 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar Pro-Series and Pro-Fish windlasses - Generation 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual 

Read more less

Stainless Steel Chain Stopper - 5/16" - 3/8"Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

V4/C4 Motor Gearbox - 24VElectric and hydraulic motor gearboxes to suit Lewmar's windlass models V4/V5 and Lewmar's Capstan C4/C5.

Read more less

HRC1002L 2 Button Remote Control with LEDMultipurpose watertight handheld remote control with integrated LED lamp.The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.HRC multipurpose hand-held remote controls are designed for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.Features: A connecting cable extensible up to 4.2M A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

WCS830 Windlass Control SwitchWindlass control board (UP/DOWN)Electric device enabling windlass even in the rudder area. IP67 front seal.

Read more less

Freedom Shaft Service KitMaxwell shaft service kit for Maxwell Freedom series windlasses.

Read more less

Replacement Stripper Arm for RC10 & HRC10Maxwell replacement stripper arm specifically for RC10 and HRC10.

Read more less

Generation 2 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

HRC1004L 4-Button Remote with LED LightThe main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.HRC multipurpose hand-held remote controls are designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.HRC Remote Controls Are Supplied Complete With: A connecting cable is extensible up to 4.2 m. A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

HRC1004 4 Button Remote ControlHRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use.ApplicationsDesigned for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc.Features: Watertight 4 buttons This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pro-Series Control Arm Kit Replacement control arm for Pro-Series 700 and 1000 windlasses.Compatible with:Pro-Series 700 and 1000 windlasses*Sold as an Individual 

Read more less

CHSX Deck Switch Closed - BlackCompatible with 12/24V Lewmar electric winches and windlasses, the CHSX Deck Switch offers a protected switch that is weather-resistant, easily installed, easy to use, and prevents accidental activation. Features: Suitable for DC electric windlasses running on 12 or 24v IP67/5 rated for water resistance Twin sealed switch compartment New lower-profile design with updated styling Technical Specifications: Material - Composite plastic Position - Closed In the Box: Deck switch Instruction manual *Sold as an individual Quick Guide (pdf)

Read more less

Lewmar Deck Foot Switch - Windlass Down - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

V700 Fall Safe Kit Fall Safe kit for Lewmar V700 windlass.Compatible With:Lewmar V700 windlassIn the Box: Fail Safe Lever  Fail Safe Shoulder Screw Fail Safe Spring Fail Safe Pawl Mounting Screw *Sold as an Individual  Owner's Manual (pdf)

Read more less

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Reversing Solenoid Pack - 12VMaxwell Reversing Solenoid Pack 12V, replaces P19045.

Read more less

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pro-Series Clutch & Cone Kit Replacement clutch and cone for Pro-Series windlasses.Compatible With:Pro-Series and Pro-Sport 550 Windlasses*Sold as an Individual

Read more less

Pressure Arm Upgrade KitMade specifically for Maxwell's Freedom Series of Windlasses.

Read more less

Generation 3 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 3 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

Pro-Fish Plunger Kit Replacement plunger kit for Pro-Fish windlasses.Compatible With:Pro-Fish windlass*Sold as an Individual

Read more less

Replacement Windlass Motor Kit - 12VReplacement Windlass Motor.Compatible with:  Lewmar V700  Lewmar Sprint 600  Technical Specifications: Power Supply - 12V Current Draw - 40Amp In the Box: Motor Gasket Mounting hardware *Sold as an Individual

Read more less

Lewmar Deck Foot Switch - Windlass Up - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

HRC1002Multipurpose watertight hand held remote control 2 Button.HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 metres, a watertight deck plug and socket, and a support bracket for stowing after use. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Foot SwitchStamped 304 Stainless Steel/Rubber Cover.This Foot Switch is normally off and momentarily on when depressed by foot. Ideal for use with windlasses. Constructed of corrosion resistant stamped 304 stainless steel and rubber. Installs with ten #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pro-Sport Motor - 150W - 12V Replacement motor for Pro-Sport series windlasses requiring 12 V and 150 watts.Compatible With:Pro-Sport windlasses*Sold as an Individual

Read more less

Windlass Control Solenoid - 12VDual-direction windlass control solenoid.Compatible with: Pro Sport Pro Series & Pro Fish 700 Pro Series & Pro Fish 1000 V700 Technical Specifications: Direction - Up and Down Nominal Voltage - 12 VDC Dimensions (H x W x D) - 2.5" x 2-3/8" x 2-1/8" *Sold as an Individual  

Read more less

Solenoid in Watertight Control Box - 12VHeavy-duty dual-direction solenoid that controls the up/down operations of Lewmar Concept 1 and V-Series windlasses. Features: Controls Up / Down operation Ideal for windlass installations in chain locker or other damp locations Nominal voltage - 12V *Sold as an Individual

Read more less

Dual Direction Solenoid - 12VA replacement dual-direction sealed solenoid/contactor that controls up/down direction.Compatible with: Horizon windlasses  Sprint 600 & 1000 windlasses Pro Series 700 & 1000 windlasses Pro Fish 700 & 1000 windlasses  Technical Specifications: Nominal Voltage - 12V Direction - Up/Down *Sold as an Individual

Read more less

Stripper Arm Kit For Freedom 800Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Read more less

REMOTE UP/DOWN CONTROLEasy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids. Manufactured from marine-grade materials. Splash proof. Suitable for use with DC 12V or 24V dual-directional solenoids. Quick Guide (pdf)Brochure (pdf)

Read more less

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

V1/V2/V3 Gypsy and Stripper Kit (No. 000)Replacement gypsy and stripper for Lewmar V1, V2 and V3 windlasses and the obsolete model Concept 1 windlass. Compatible With: V1, V2, V3 and Concept 1 windlassesTechnical Specifications: Rope Size - 1/2" (13 mm) (3 strand) Chain Size - 1/4" (6 mm) (G4) *Sold as an Individual 

Read more less

Replacement Pressure Arm f/HRCFF WindlassFeatures: Applications: HRCFF Sold Individually

Read more less

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation UV stabilized plastic Quick Guide (pdf)Brochure (pdf)

Read more less

Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.Specifications: Chain Size: 1/4" to 5/16" Strength: 5500lbs Material: Stainless Steel Length: 3-9/16" Width: 5/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Circuit Breaker - 35 AMP Panel mounted a waterproof breaker that works with DC systems up to 48 volts.  This trip-free breaker is ideal for a windlass circuit. Features: Works with DC systems up to 48 volts Clear, single lever operation Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Ignition protected Technical Specifications: Circuit Breaker Class - Type III Circuit Breaker Type - Thermally responsive bi-metal blade Maximum Voltage - 48V DC Amperage - 35 AMP Mounting - Panel Mount Weight: -.5lb (0.23 kg) *Sold as an Individual

Read more less

FOOTSWITCHESMaxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation Quick Guide (pdf)Brochure (pdf)

Read more less

"It Floats™" - Locking Winch Handle - Injection Molded Fiberglass Nylon"It Floats™" Locking Winch Handle features a patented design. Made by air assist injection molding instead of the traditional foam-filled method, preventing any potential leakage of foam from within the handle. Ball bearings in the handle ensure smoother action under load. Fits in the dip molded PVC Winch Handle Holder (724200) sold separately.

Read more less

Wireless Remote for G3 Anchor Winch Allows push-button anchor winch operation from any location.  The wireless remote clips into a handy storage bracket that can be mounted on your helm or anywhere you wish.  You have the option of using the remote anywhere in the boat, or using it like a dash-mounted switch.Compatible With:  TRAC G3 Fisherman 25 (69002/T10108-G3) and Pontoon 35 (69003/T10109-G3)Features: Allows push-button anchor winch operation from any location Wireless remote clips into a handy storage bracket  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bush 1/2" NylonFeatures: 1/2" Nylon 741 330B

Read more less

Deck Foot Switch - Windlass Down - White PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Read more less

Stainless Steel Chain Gripper PlateThis Chain Gripper Plate stabilizes anchor chains and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Bow Shackles (147212) to connect lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16", and 1/2". Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less