Anchor release system for small boats in still-water fishing situations. Easy lock and release action allows anchor line adjustments with only one hand. For use with rope up to 1/2" diameter. Tough construction and roller bearing for smooth, quiet operation. Includes a No. 241 Side/Deck MountWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass

Read more less

Reversing Solenoid Pack - 24VMaxwell Reversing Solenoid Pack 24V, replaces P19046.

Read more less

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind. The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer. An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use. The RC6 is available only as a low profile unit (no optional capstan drum).Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 1/4" Rope Diameter (Inches): 1/2" Vertical/Horizontal: Vertical Box Dimensions: 10"H x 15"W x 15"L WT: 25 lbs UPC: 1000000004816 Brochure (pdf)

Read more less

Rode CounterAuto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode. Rode length monitoring from the helm. Large LCD display with adjustable red back lighting shows length of anchor rode deployed. Display in feet or metres. Docking alarm warns skipper when anchor is close to docking. Easy set up with pre-programmed calibrations for rope/chain ropes. Install one or more units or combine with the AA550RC, AA500C or AA601 for multiple stations. Works on 12 or 24V DC. Standard 60mm (2.36) marine instrument console. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

RC10 Automatic Rope/Chain Windlass Designed for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbs Metric Chain Size: 8mm Motor Wattage: 1000W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass. Manufactured from marine grade chromed bronze for long term durability The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required! A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck. Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Vertical Box Dimensions: 11"H x 17"W x 20"L WT: 50 lbs UPC: 1000000004267 Quick Guide (pdf)Brochure (pdf)

Read more less

Maxwell AA560Panel Mount Windlass Controller and Rode Counter Preset stopping point on retrieval One-touch function to deploy and retrieve a preset length of rode Adjustable back lit display in feet, metres or fathoms Graphic LCD screen featuring intuitive user interface for simple operation Displays windlass speed and direction, plus battery voltage Safety lock to help protect against accidental windlass deployment Logs windlass operation hours to help ensure regular windlass maintenance This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation One foot switch supplied standard with each winch (except Freedom, Liberty and hydraulic units). UV stabilized plastic Quick Guide (pdf)Brochure (pdf)

Read more less

5/8" Double Braid Dock Line - Black - 50'Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque balanced construction and a unique stabilization process, which produces this long wearing line that resists kinking.Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color - Black Material -  Double braid nylon  Rope Diameter - 5/8" (16mm) Rope Length - 50' (15.2 M) Tensile Strength - 13,100 lb *Sold as an Individual Specifications: Tracer: No Rope Type: Braided Nylon Color: Black Length (Feet): 50' Rope Diameter (Inches): 5/8" Box Dimensions: 6"H x 6"W x 16"L WT: 5.8 lbs UPC: 753963038077 Brochure (pdf)

Read more less

FX-11 - Clip Set Original replacement clip set for the FX-11 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)  Includes mounting hardware.*Sold as an Individual

Read more less

FX-16 Complete Anchoring SystemWhether used as a primary anchor or conveniently-stowed backup, Fortress Marine Anchors are well-known for their exceptional holding capability.  This Complete Anchoring Systems has it all.  Two large, precision-machined and sharpened flukes ensure that Fortress anchors set fast and dig deep.  Unlike others, they’re easily adjusted from a 32° angle for use in sand and clay to 45° for soft mud.  Unique Mud Palms are included to optimize setting performance in problem soft bottoms.  Also included is 15′ of 1/4″ G-30 chain that is spliced to 250′ of shock- absorbing 3/8″ three-strand nylon rope and a 1/4″ shackle.*For boats up to 38' (12 M) *Made in the U.S.A.In the box: Fortress FX-16 anchor 1/4" Shackle 15' of G-30 1/4" Chain 250' of 3/8" three-strand nylon rope Safe anchoring guide *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 10 Box Dimensions: 8"H x 9"W x 33"L WT: 32.25 lbs UPC: 647124000167 Brochure (pdf)

Read more less

FX-16 Anchor - 10lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 33' to 38' (10 to 12 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 1,250lb (567kg) Shank Length - 31" (787mm) Fluke Length - 18" (457mm) Stock Length - 25" (635mm) Weight - 10lbs (4.5kg) *Sold as an Individual  Specifications: Weight (lbs): 10 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 3"H x 7"W x 32"L WT: 11.6 lbs UPC: 647124120162 Quick Guide (pdf)Brochure (pdf)

Read more less

FX-11 Anchor - 7lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 28' to 32' (8 to 10 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 900lbs (408kg) Shank Length - 27" (686mm) Fluke Length - 16" (406mm) Stock Length - 22" (559mm) Weight - 7lbs (3.2kg) *Sold as an Individual  Specifications: Weight (lbs): 7 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 3"H x 6"W x 29"L WT: 8 lbs UPC: 647124120117 Quick Guide (pdf)Brochure (pdf)

Read more less

FX-55 Anchor - 32lb For over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 52' to 58' (16 to 18 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 4,000lb (1,814kg) Shank Length - 46" (1,168mm) Fluke Length - 27" (686mm) Stock Length - 37" (940mm) Weight - 32lbs (14.5kg) *Sold as an Individual  Specifications: Weight (lbs): 32 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 5"H x 10"W x 48"L WT: 37.9 lbs UPC: 647124120551 Quick Guide (pdf)Brochure (pdf)

Read more less

Fixed Eco - Weld Free Aluminum 5-Step Dock LadderThese durable ladders have been designed to make a minimum carbon footprint. It is manufactured with no welding processes involved. Easily assembled in a few minutes with stainless steel fasteners. Wider steps make for a sure grip and a safe climb. Rail Height: 18-1/2" above the dock Distance to first step: From dock surface, 11" & 11" between steps Steps: Are 2-1/2" deep and 14" wide Capacity: 500lbs (227 kg) Specifications: Construction: Aluminum Alloy Step Count: 5 Step Box Dimensions: 4"H x 23"W x 25"L WT: 14.8 lbs UPC: 776113207505

Read more less

Shore Spike - Chrome PlatedMake quick work of anchoring your boat or personal water craft in shoreline materials including sand, clay, or firm soil. Securely holds boats up to 26 feet. Dimensions 1/2" x 4" x 36".Features: Fit type: Universal Chrome Plated Design Quick and easy installation Refer to manufacturer recommendations and guidelines to ensure proper use

Read more less

Quick Release Fender Lock Receiver OnlyStainless Steel & High Polish For dockside safety and convenience, Taco Marine's new fender lock ensures secure, quickly stored fender lines. The fender lock ensures that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders their ideal position.The "Fender Lock Receiver Only" allows boaters the ability to quickly and easily place fenders in multiple places where they prefer to hang them off the boat at the desired height position every time.Features: Designed for simple single hand operation Will allow easy installation and removal of float style fenders Limited 3 year Warranty Specifications: Stainless Steel Type 316 Drain plug: 1/4" NPT This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pro-Series Horizontal 1000H Windlass Kit - 12VPraised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats.  It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system. Anchoring has never been easier.Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 1,000lbs Maximum Line Speed - 88'/min Maximum Chain Size - 5/16" Maximum Rope Size - 5/8" Power - 12 V Maximum Boat Length - 38' Mounting Position - Horizontal In the Box: Windlass Switch Circuit breaker Dual direction contactor/solenoid Instruction manual *Sold as an Individual  Specifications: Chain - Diameter (Inches): .45 Freefall: Yes Rope Diameter (Inches): .65 Vertical/Horizontal: Horizontal Box Dimensions: 10"H x 10"W x 18"L WT: 30 lbs UPC: 743683319891 Owner's Manual (pdf)

Read more less

G-6 Twin Eye Fender 11" x 30" - Metallic BluePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs *Sold as an Individual Specifications: Color: Blue Height: 30" Width: 11" Box Dimensions: 9"H x 11"W x 30"L WT: 6.75 lbs UPC: 743952036054 Brochure (pdf)

Read more less

Anchor Rode 20' - 7mm Chain - 100' - 1/2" 3 Plait RopeAn anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life. Specifications: Chain - Length (Feet): 20' Rope Type: 3-Strand Nylon Chain - Diameter (Inches): 7mm Rope Length (Feet): 100' Rope Diameter (Inches): 1/2" Box Dimensions: 13"H x 15"W x 15"L WT: 28 lbs UPC: 8057090077520

Read more less

Spring-Pressure Arm for RC6, 8 & 10Maxwell Spring-Pressure Arm specifically for RC6, RC8 and RC10.

Read more less

Stripper Arm Kit For Freedom 500Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Read more less

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.HRC8 Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation High efficiency spur gearbox incorporating a robust non-backwind mechanism High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch Emergency "free fall" function in the event of onboard power failure Revolutionary new chainwheel - see over Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection Kits include:windlass, on/off breaker panel, reversing soleniod, up/down panel switch, a clutch release handle Specifications: Model: HRC8 Maximum Pull: 900lbs Chain Short Link: 5/16" Rope Size (Nylon): 9/16" Line Speed(Anchor Retrieval): 108'/min Power Supply(DC): 12V Motor Power: 600W Net Weight: 25lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 9/16" Vertical/Horizontal: Horizontal Box Dimensions: 10"H x 14"W x 15"L WT: 29 lbs UPC: 9414761104029 Brochure (pdf)

Read more less

Anchor Rode 25' - 8mm Chain - 300' - 9/16" RopeAn anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life. Specifications: Chain - Diameter (Inches): 8mm Chain - Length (Feet): 25' Rope Diameter (Inches): 9/16" Rope Length (Feet): 300' Rope Type: 3-Strand Nylon Box Dimensions: 15"H x 15"W x 15"L WT: 63 lbs UPC: 8057090077728

Read more less

Aluminum Anchor 6.9kg for Boats to 36'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

Aluminum Anchor 4.5kg for Boats to 33'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

Stainless Steel Anchor 5kg for Boats to 21'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

3" Raptor Setback Bracket - BlackProvides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors.Features: Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty Brochure (pdf)

Read more less

Stowage Bag for AP5 & AP8 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stowage Bag for AP50 & AP60 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stainless Steel Anchor 8kg for Boats to 30'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

Aluminum Anchor 1.7kg for Boats to 18'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

Stowage Bag for AP20, AP37, & AP31 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Flat Anchor Line with Chain for Vessels up to 15' 75' + 9' Galvanized Chain on Storage ReelFor smaller boats (jet skis, kayaks, auxiliary boats) made of flat PES polyester tape with great resistance to the sun, marine environment, and load capacity. Length 25 meters + 3 meters of 4 mm galvanized steel chain, with a very useful reel. Because it is a flat tape, it can be rolled up very easily, occupying very little volume. The AFL is supplied in deep orange, making it easy to see. Ideal complement to your Ankerplex.

Read more less

Stowage Bag for AP11 & AP16 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stainless Steel Anchor 11kg for Boats to 36'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to.

Read more less

Aluminum Anchor 2.6kg for Boats to 23'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

Stowage Bag for AP1 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Smart Cleat 6" Stud Mount Investment Cast 316 Stainless SteelThe Stud Mount Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. The stud mounted fasteners are hidden, leaving no exposed fasteners to collect water or debris. Studs are 1/4"-20 x 1-1/2". Installation is easy with two standard bit size holes drilled for the studs (no cutouts or hole saws required). Includes stainless steel washers and nuts. Constructed of corrosion resistant investment cast 316 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Finish: Polished Size: 6" Construction: Stainless Steel Box Dimensions: 1"H x 6"W x 11"L WT: 0.7 lbs UPC: 035514041768

Read more less

DeckHand™ 25#1810125The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Features 25-lb anchor capacity (anchor not included) Pre-spooled with 60 feet of 800-lb test nylon rope Davit can be mounted at base of DeckHand or in remote position on deck Davit stows most kinds of anchors Stow and deploy switch integrated into the base of the unit Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35) Includes: remote mountable anchor davit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 9"H x 11"W x 15"L WT: 12.8 lbs UPC: 029402027897 Owner's Manual (pdf)

Read more less

Chafe Guard Black for Lines up to 3/4"-1" DiameterBuilt from rugged and durable polyurethane, this rope protector has a patented technology that allows it to automatically wrap itself around a rope and provide long-term chafe protection.Features: Made in the USA Rugged polyurethane stands up to chafe and abrasion Self-wraps around the line several times for a snug and firm fit Resists rot, grime, and UV longer than other chafe gear Will not streak Removable Fast & easy to apply Specifications: Chafe Guard Size: 23.50″ Long x 9″ wide (unrolled) Fits Lines Up To: 3/4”-1” Weight: 6 oz Color: Black Material: Polyurethane Ultimate Tensile Strength: 10,000 PSI Ultimate Elongation: 450% Vicat Softening Point: 92 Degrees C

Read more less

Chafe Guard Orange for Lines up to 3/4"-1" DiameterBuilt from rugged and durable polyurethane, this rope protector has a patented technology that allows it to automatically wrap itself around a rope and provide long-term chafe protection.Features: Made in the USA Rugged polyurethane stands up to chafe and abrasion Self-wraps around the line several times for a snug and firm fit Resists rot, grime, and UV longer than other chafe gear Will not streak Removable Fast & easy to apply Specifications: Chafe Guard Size: 23.50″ Long x 9″ wide (unrolled) Fits Lines Up To: 3/4”-1” Weight: 6 oz Color: Orange Material: Polyurethane Ultimate Tensile Strength: 10,000 PSI Ultimate Elongation: 450% Vicat Softening Point: 92 Degrees C

Read more less

Rope Protector Black for Lines 1/2" & GreaterSpiroll rope protectors employ a unique patent-pending technology whereby the device’s rugged polyurethane material wraps snugly around a rope several times to secure itself in place. Application takes less than 20 seconds.Features: Made in the USA Self-wraps around rope for a snug fit (no need to tie off) Extends a rope's life  Protects fixed ropes from abrasion and sharp edges Easy to remove/replace Can be stored on a coiled rope Constructed from advanced elastomeric polymer for maximum durability Specifications: Rope Protector Length: 24” Color: Black Material: Polyurethane

Read more less

Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)

Read more less

Pro Series Seals, Dowels & Screws Kit Seals, Dowels, and Screws Kit for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Dowel 1/4" x 1 1/4" x three (3) Dowel, 6 x 30 mm x one (1) Dowel, 8 x 45 mm x one (1)  Socket HD cap screw 10-24UNC x 1 1/4" x six (6) Wiper seal x two (2) *Sold as an Individual 

Read more less

Pro-Series Bearings Kit - 2nd GenerationBearing kit for Generation 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar Pro-Series and Pro-Fish windlasses - Generation 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual 

Read more less