Lewmar Deck Foot Switch - Windlass Down - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

Aluminum Dock Bench with ArmsStrong weather-resistant anodized aluminum frame with extruded aluminum support legs. Easy to assemble, heavy-duty design.

Read more less

Aluminum Dock BenchStrong anodized aluminum frame with extruded aluminum support legs, weather-resistant for harsh marine environments. Heavy-duty design, easy to assemble.

Read more less

EZ Board Boarding Handle - 36"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance. Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove. Do not force the EZ Board handle to install or remove. Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle however they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Piling Post Bumper - One End Capped - 6' - White Premium marine grade PVC construction Molded-in UV Inhibitors & Fungicides Integral strengthening ribs Curved profile and extended legs make piling post mounts easier Available in 6 Ft. Lengths Specifications: Color: White Box Dimensions: 5"H x 5"W x 72"L WT: 12 lbs UPC: 776113102206

Read more less

8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features: Ideal for small boats and watercraft Low-profile, fold-down design keeps cleat clear of dock traffic Marine-grade aluminum protected with corrosion resistant finish Easy to install on all dock types Requires two standard 3/8" carriage bolts (not included) Specifications: Finish: White Size: 8" Construction: Aluminum Box Dimensions: 1"H x 7"W x 8"L WT: 1.25 lbs UPC: 022697120496

Read more less

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

3/8" Premium 3-Strand Dock Line - Navy Blue - 25'The Premium 3-Strand Nylon from New England Ropes features outstanding strength and high abrasion resistance.Premium 3-Strand Nylon is a long-wearing, flexible and easy-to-handle rope that has greater strength and better abrasion resistance than all other 3-strand nylon lines.  The highest tenacity nylon treated with proprietary Marine Tech coating increases its wet strength and improves its fiber-to-fiber abrasion.Applications:  Dock line - ≤20' (6.1 M) vessel Anchor lines - ≤ 20' (6.1 M) vessel Technical Specifications: Color - Navy Blue Material -  3-Strand high grade marine nylon  Rope Diameter - 3/8" (10mm) Rope Length - 25' (7.62 M) Tensile Strength - 4,250 lb *Sold as an Individual Specifications: Tracer: No Rope Type: 3-Strand Nylon Color: Navy Blue Length (Feet): 25' Rope Diameter (Inches): 3/8" Box Dimensions: 4"H x 4"W x 8"L WT: 1.45 lbs UPC: 753963122288 Brochure (pdf)

Read more less

Fender Cover for A-4 Fender - BlackFender covers should be as tough as the fenders they protect.  That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure.  Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet.  The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split.  This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.Compatible With:A-4 FendersFeatures: Hand-crafted with heavy-duty polyester fabric for durability Sun resistant, abrasion-resistant and water-resistant Washable Custom fit for a tailored look A tough 1/4" line drawstring closure Quick and easy installation *Sold as an Individual Specifications: Color: Black Box Dimensions: 2"H x 10"W x 14"L WT: 1.25 lbs UPC: 743952008235 Brochure (pdf)

Read more less

Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.Features: Accepts up to 1/2-inch diameter fender line Stainless steel construction and includes mounting hardware Includes two flush-mount stainless steel mounting plates and two stainless steel keys Quickly and easily install or move fenders when mooring Dimensions: Width: (inch) 2" Height: (inch) 1" *Line sold separately Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Raptor Jack Plate Adapter Bracket - Starboard - 8" Setback - 6" Rise - WhiteMounts directly to your jack plate on the starboard side of your boat providing 8 inches of setback and 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 8 inches of setback from the transom and 6 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

FX-16 - Fluke Original replacement fluke for the FX-16 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

3 Piece Dock Bumper Kit - 1 Corner Piece, 2 18" Straight PiecesThis roto-molded bumper kit is fabricated from soft vinyl with UV Inhibitors and Fungicides. Each piece has angled ends to deflect craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications. Specifications: Color: White Box Dimensions: 6"H x 12"W x 19"L WT: 4.5 lbs UPC: 776113731000

Read more less

Dock Edge Flip-Up Dock Cleat 8"PolishedCast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2608P-F Description: Dock Cleat, Flip Up, 8", Aluminum, Polished Weight: 1.5 lbs. Packaging Dimensions: 13 x 7 x 1 inches Specifications: Construction: Aluminum Alloy Finish: Polished Size: 8" Box Dimensions: 1"H x 5"W x 8"L WT: 1.8 lbs UPC: 776113426081

Read more less

Dock Edge DocKushion Premium Foam ProfilePart No. 1150-F DocKushion, Large 48" FoamThe ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.Product Specifications: Part No.: 1150-F Description: DocKushion, Large, (1 pc/Pk), 48", Putty, Foam Specifications: Color: Grey Box Dimensions: 2"H x 4"W x 48"L WT: 3.5 lbs UPC: 776113115008

Read more less

Piling Post Bumper - One End Capped - 6' - Black Premium marine grade PVC construction Molded-in UV Inhibitors & Fungicides Integral strengthening ribs Curved profile and extended legs make piling post mounts easier Available in 6 Ft. Lengths Specifications: Color: Black Box Dimensions: 5"H x 5"W x 72"L WT: 12 lbs UPC: 776113102268

Read more less

Raptor Travel Cover for 8'Protects 8' Raptor models from road hazards while trailering. Custom-fit with an all-weather, corrosion-resistant zipper. UV resistant black vinyl. Not intended for use while on the water.Features: Compatible with 8' Raptor Models Only Color: Black

Read more less

A-3 Buoy 17" Diameter - WhiteThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 17" x 23" (43.2 x 58.4cm) Eye Diameter - 1.125" (2.9cm) Circumference - 53.4" (135cm) Volume - 14.5 gallons (54.9L) Boat Size - 40' - 50' (12.2 - 15.2M) *Sold as an Individual Specifications: Color: White Diameter (Inches): 17" Box Dimensions: 8"H x 18"W x 23"L WT: 6.8 lbs Brochure (pdf)

Read more less

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.Kit Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Clutch Release Handle Features The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope. The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope. The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck Case Material: Anodized Aluminum The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck,routine maintenance. Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up. The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain). The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs. High quality Stainless Steel chainwheels The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system. The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required. The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel. Exclusive Maxwell 3 YEAR Limited Warranty Specifications Maximum PUll: 1540 lbs Chain Short Link: 5/16" or 8mm Chain Speed (Anchor Retrieval): 79 ft per Minute Rope Speed (Anchor Retrieval): 65 ft per Minute Rope Size (Nylon 3 strand or 8 Plait): 5/8" Power Supply (DC): 12VDC Motor Power: 1000 Watts Net weight: 42 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 12"H x 17"W x 19"L WT: 56 lbs UPC: 1000000002683

Read more less

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 11"H x 17"W x 20"L WT: 55 lbs UPC: 1000000002638 Brochure (pdf)

Read more less

A6 - 34" x 46-1/2" - Double Layer - BlackThe A-Series are double layered making them softer, more durable & reversible.Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Black Box Dimensions: 5"H x 15"W x 15"L WT: 4 lbs UPC: 817382010479

Read more less

Generation 3 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 3 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

Quick Draw Fender AdjusterFeatures: Tightly holds to bow rails, grab rails, lifelines, cleats, and more! Instantly adjust the height of your fender with a push of a button Stainless steel screws and internal spring Fits 1/4" - 1/2" fender lines Two Quick Draw Hangers can be used together to horizontally hang a Big B, Storm Gard, or Hull Gard fender. 

Read more less

12' King Pin Anchor Pole - 2-Piece - WhitePanther KPP120W King Pin Anchor Pole comes as a 2 Piece with a length of 12' and color white. 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of 3/4" diameter, high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while allowing easy bottom penetration. Rubber storage clips with mounting screws included. (8', single-piece pole also available.)Features: 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown Easy to store and transport Constructed of 3/4" diameter, high-impact fiberglass Equipped with molded foam grips

Read more less

Fender Holder w/Adjuster - WhiteTough and durable PVC mounting strap snaps over railings, lifelines or stanchions. Allows fender lines to be adjusted to length in a matter of seconds.

Read more less

Dock Edge Standard "D" PVC Profile 16ft Roll - WhiteThis versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide. Packaged in easy to use rolls for fewer joints.Product Specifications: Part No.: 1190-F Description: "D" Profile, (16 Ft/Roll), White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 4"H x 23"W x 23"L WT: 10.6 lbs UPC: 776113119006

Read more less

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44lb. AnchorsStainless Steel Jaw Jaw Swivel

Read more less

Anchor Kit797 50' Premium Nylon Line 1.5lb Folding Anchor Watertight Buoyant Container - doubles as a bailer Nylon Snap Hook, for easy attachment to vessel For still water use. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle as they would like. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mantis Underwater Add-On Light Add an additional light to expand the standard Mantis Dock Lighting System from a 3 light kit to a 4 light package. All necessary mounting hardware, Zip-Mount™ ties and cabling are supplied with the add-on light option package. Each Mantis Dock Lighting Kit can accommodate up to a maximum of 4 lights, to add addition lights, additional kits will need to be purchased (4 light maximum per kit).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

18" Tuff End™ Inflatable Vinyl Buoy - OrangeTuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry.Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength, the strongest in the industry! Tuff Ends feature large line holes that will accept standard shackles. The curved design hole prevents chafing.Recommended inflation is 2 psi.* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Features: 1 year warranty Valve located on the side of the buoy for easy inflation Dia: 18" Circumference: 57" Line Hole: 1-1/2" Approx. Buoyancy (lbs): 112 Specifications: Color: Orange Diameter (Inches): 18" Box Dimensions: 12"H x 16"W x 24"L WT: 7.45 lbs UPC: 040011316493

Read more less

Foot SwitchStamped 304 Stainless Steel/Rubber Cover.This Foot Switch is normally off and momentarily on when depressed by foot. Ideal for use with windlasses. Constructed of corrosion resistant stamped 304 stainless steel and rubber. Installs with ten #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Valve ScrewReplacement valve screw for Polyform US inflation valves.*Sold as an Individual Owner's Manual (pdf)

Read more less

FX-23 Anchor - 15lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 39' to 45' (12 to 14 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 2,000lb (907kg) Shank Length - 36" (914mm) Fluke Length - 21" (533mm) Stock Length - 29" (737mm) Weight - 15lbs (6.8kg) *Sold as an Individual  Specifications: Weight (lbs): 15 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 4"H x 8"W x 38"L WT: 17.1 lbs UPC: 647124120230 Quick Guide (pdf)Brochure (pdf)

Read more less

Super Gard™ 6.5" x 22" Inflatable Vinyl Fender - BlueTaylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Boat Size: 20' to 25' Recommended inflation is 2 psi. * The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Lifetime Warranty against splitting or bursting Specifications: Color: Blue Height: 22" Width: 6.5" Box Dimensions: 8"H x 8"W x 22"L WT: 2.7 lbs UPC: 040011007896

Read more less

Air PumpSpecially designed for inflating Polyform products.  High volume air pump,  can also be used on other inflatable products such as air mattresses and toys.*Sold as an Individual Owner's Manual (pdf)

Read more less

Dual Direction Solenoid - 12VA replacement dual-direction sealed solenoid/contactor that controls up/down direction.Compatible with: Horizon windlasses  Sprint 600 & 1000 windlasses Pro Series 700 & 1000 windlasses Pro Fish 700 & 1000 windlasses  Technical Specifications: Nominal Voltage - 12V Direction - Up/Down *Sold as an Individual

Read more less

Anchor Ring & RopeAssists in anchor retrieval. Designed to lift anchor systems up to 80lbs where 10' or more of anchor chain is used. Lifting capacity based on anchor buoy size. *Buoy sold separately.

Read more less

Stripper Arm Kit For Freedom 800Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Read more less

A-Series A-5 Buoy 27" Diameter - WhiteThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue rope hold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy-duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  Technical Specifications: Size - 27" x 36" (68.6 x 91.4cm) Eye Diameter - 1.25" (3.2cm) Circumference - 84.9" (215.5cm) Volume - 47.6 gallons (180.2L) Boat Size - 60' and up (18.3M) *Sold as an Individual Specifications: Color: White Diameter (Inches): 27" Box Dimensions: 4"H x 18"W x 37"L WT: 18.5 lbs Brochure (pdf)

Read more less

Boat Line StrapThis versatile line holder keeps line and cords neat and easily accessible.  Made from UV resistant vinyl with stainless steel hardware for durability.*Sold as an Individual

Read more less

Solar Dock Cleat96-288-FAttractive and Functional with Powerful Solar Charging Performance & Mooring StrengthFeatures: Cast Aluminum Alloy Chassis Wide, Sturdy Base footprint 5 Super Bright white LEDs for side and base illumination (18000 milli Candela each) Polycarbonate side lenses Epoxy Monocrystalline solar panel Rechargeable, Replaceable AAA (Ni-MH) battery Waterproof to Standard IP65 Up to 12 hours illumination from a single charge Automatic On-At-Dusk Viewing Distance up to 325 ft. (100m) Optimal working temperature -4 degrees F to +140 degrees F (-20 degrees C to +60 degrees C) Dimensions: W= 10" (254mm) D= 3.9" (100mm) H= 3" (75.4mm) Specifications: Construction: Aluminum Alloy Finish: Grey Size: 10" Box Dimensions: 4"H x 5"W x 11"L WT: 1.75 lbs UPC: 776113962886

Read more less

FX-16 - Mud Palm Set - Pair Original replacement mud palms for the FX-16 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

Standard PVC Full Face Profile - 16' Roll - BlackIdeal for larger applications, this profile provides extra strength and security against damage to boats or property. Double internal channels with cross girder adds additional protection from impacts and provides a large contact area.WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 6"H x 23"W x 23"L WT: 18 lbs UPC: 776113116302

Read more less

Guardian G-11 Anchor - 5LBGuardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy.  These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated.  The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms.  The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.*Made in the U.S.A.Features: Fortress high-tech aluminum alloy Rust-proof and non-magnetic materials Easily assembles and disassembles for convenient storage No failing welded pieces Easy to manage weight Replaceable parts Technical Specifications: Size of Boat - 23' to 27' (7 to 8 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 750lbs (340kg) Shank Length - 25" (635mm) Fluke Length - 15" (381mm) Stock Length - 20" (508mm) Weight - 5lbs (2.26kg) *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 6 Box Dimensions: 2"H x 5"W x 27"L WT: 5.5 lbs UPC: 647124340119 Quick Guide (pdf)Brochure (pdf)

Read more less

FX-7 Anchor - 4lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 16' to 27' (5 to 8 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 700lbs (318kg) Shank Length - 24" (610mm) Fluke Length - 14" (356mm) Stock Length - 19" (483mm) Weight - 4lbs (1.8kg) *Sold as an Individual  Specifications: Weight (lbs): 4 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 3"H x 5"W x 25"L WT: 4.8 lbs UPC: 647124120070 Quick Guide (pdf)Brochure (pdf)

Read more less