Pro-Fish Drive Cap Assembly KitAllow your Series Pro-Fish 700 and 1000 windlass models to allow the anchor and rode in free-fall fashion.  No more waiting for the for the windlass motor to mechanically lower the anchor.Features: Direct replacement part Able to be manually overridden or controlled with a standard winch handle Made of Stainless Steel In the Box: Drive Cap with pin Plunger Instruction Manual *Sold as an Individual 

Read more less

Dual Gypsy Rope/Chain 6-7mm - 1/4"Features: Replacement gypsy for Lewmar Pro-Series 700, 1000, and Pro-Fish 700 windlasses Capable of handling metric chain

Read more less

Anchor Lock for Up to 55lb AnchorsAnchor lock holds up to a 55lb anchor in place and prevents accidental deployment.Features: Surface mountable Works with chain or shackle Corrosion-resistant  Easy installation Technical Specifications: Material - Stainless Steel Pin Size - .25" Dimensions (H x L x W) - 1.5" x 4" x 1.5" Max. Capacity - 55lbs *Sold as an Individual

Read more less

Pro-Fish 1000 Horizontal Windlass Kit - 12VLewmar's Pro-Fish model is the ultimate windlass for fishermen.  The Pro-Fish has an automatic freefall that allows you to pull right up over a wreck or ledge, and drop anchor with speed and precision.  No more running your motor or wasting fuel while you hover fish.  You can retrieve your anchor just as easily, with the push of a button. Plus, the Pro-Fish is DIY-ready and made of durable 316 stainless steel.The Pro-Fish is perfectly suited to installation in the stern of a boat, where it can be utilized for easy Scandinavian-style stern anchoring.  The automatic free-fall mechanism means access to the windlass is not required to drop or retrieve the anchor and the all-stainless design is extremely resistant to corrosion.This windlass has been specially designed to suit leaded lines up to 5/8" in diameter and a revised control arm and new Pro-Guard plate prevent the rope from jumping out of the windlass or snagging during operation.Features: Automatic freefall Powerful motor providing fast line speed Manual emergency recovery equipped all you need is a common 1/2 socket wrench Convenient above-deck installation Technical Specifications: Chain Size - 5/16" G4 or BBB Rope Size - 5/8" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 700 Watt Maximum pulling power - 1000lb (453kg) Maximum Working Load - 250lb (113.4kg) For boats up to 38' (11.58M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Dual-direction solenoid Rocker switch Instruction manual  *Sold as an Individual Specifications: Freefall: Yes Vertical/Horizontal: Horizontal Box Dimensions: 9"H x 12"W x 13"L WT: 32 lbs UPC: 743683326677 Owner's Manual (pdf)

Read more less

Pro-Series Clutch Nut LeverPro-Series windlass clutch nut lever (wrench) is designed for installation and tensioning of windlass free-fall mechanism.Compatible with: Pro-Series windlass Por-Fish Windlass V700 Windlass *Sold as an Individual

Read more less

Deck Foot Switch - Windlass Up - White PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Read more less

Pro-Series Horizontal 700 Windlass - 12VPraised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats.  It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system. Anchoring has never been easier.Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 32' Mounting Position - Horizontal In the Box: Windlass Instruction manual *Sold as an Individual Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .50 Vertical/Horizontal: Horizontal Box Dimensions: 4"H x 4"W x 18"L WT: 20 lbs UPC: 743683306495 Owner's Manual (pdf)

Read more less

Deck Foot Switch - Windlass Up - Stainless SteelLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Read more less

Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope with ShackleThis Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 3-strand line and comes with a D shackle.Technical Specifications: Total Length - 215' Chain Length - 15' Chain Size - 1/4" Chain Type - G4 Rope Length - 200' Rope Size - 1/2" Rope Type - 3 Strand Shackle - 5/16" D *Sold as an Individual Specifications: Chain - Diameter (Inches): 1/4" Chain - Length (Feet): 15' Rope Diameter (Inches): 1/2" Rope Length (Feet): 200' Rope Type: 3-Strand Nylon Box Dimensions: 8"H x 8"W x 18"L WT: 20 lbs UPC: 743683406430

Read more less

Guarded Rocker Switch (Up/Down)The guarded rocker switch controls the up and down function of all anchor windlass models with a solenoid/contactor or control box. The switch can be mounted at the helm as the main switch for operation or mounted at a second station as a secondary switch.  It features a raised plastic guard surrounding the rocker switch which helps prevent accidental activation of the windlass, enabling safer operation. Technical Specifications: Switch Direction - Up/Down Material - Plastic Power - 12/24V Color - Black *Sold as an Individual

Read more less

Ring Buoy Holder w/30' Heaving LineFeatures: Ring holder is constructed from anodized aluminum Fits all sizes of ring buoys Comes complete with 30' mildew resistant, white U.V. polypropylene floating heaving line with attached rope float Float also sold separately for use with swim area floating ropes or nets Accommodates rope up to 3/8" in diameter

Read more less

Raptor Jack Plate Adapter Bracket - Port - 2" Setback - 4" Rise - WhiteMounts directly to your jack plate on the port side of your boat providing 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 4 inches of vertical rise Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

Raptor 8' Shallow Water Anchor with Active Anchoring - WhiteRaptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you’re ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.Features: Active Anchoring: This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom Auto Bottom Mode: On Active Anchoring enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types. Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater Specifications: Product Weight 38 lb Anchoring Depth 8 ft Product Dimensions 15.5 in x 4.75 in x 58 in Operation Hydraulic Active Anchoring  Deployment Four-Bar Articulating Arm Auto Up/Down Wireless Remote 15' Hydraulic hoses Owner's Manual (pdf)

Read more less

F-11 Twin Eye Fender 21.2" x 57.5" - BlackPolyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.  The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice! Classic European twin-eye style boat fenders for the most discerning eye.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 21.2" x 57.5" (53.8 x 146.1cm) Eye Diameter - 1.1" (2.8cm) Circumference - 66.6" (169.2cm) Volume - 63.7 gallons (241.1L) Boat Size - 60' and greater (18.3M and greater) Weight - 25.5lbs *Sold as an Individual Specifications: Color: Black Height: 57.5" Width: 21.2" Box Dimensions: 9"H x 17"W x 30"L WT: 24.9 lbs UPC: 743952004657 Brochure (pdf)

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - Cobalt Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.9 lbs Brochure (pdf)

Read more less

A-3 Buoy 17" Diameter - RedThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 17" x 23" (43.2 x 58.4cm) Eye Diameter - 1.125" (2.9cm) Circumference - 53.4" (135.7cm) Volume - 14.5 gallons (54.9L) Boat Size - 40' - 50' (12.2 - 15.2M) *Sold as an Individual Specifications: Color: Red Diameter (Inches): 17" Box Dimensions: 8"H x 18"W x 23"L WT: 6.8 lbs Brochure (pdf)

Read more less

A-5 Buoy 27" Diameter - RedThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 27" x 36" (68.6 x 91.4cm) Eye Diameter - 1.25" (3.2cm) Circumference - 84.9" (215.5cm) Volume - 47.6 gallons (180.2L) Boat Size - 60' and greater (18.3M) *Sold as an Individual Specifications: Color: Red Diameter (Inches): 27" Box Dimensions: 4"H x 18"W x 37"L WT: 18.5 lbs Brochure (pdf)

Read more less

G-6 Twin Eye Fender 11" x 30" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 30" Width: 11" Box Dimensions: 1"H x 3"W x 6"L WT: 6.65 lbs Brochure (pdf)

Read more less

Fender Cover for A-2 Fender - BlackFender covers should be as tough as the fenders they protect.  That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure.  Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet.  The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split.  This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.Compatible With:A-2 FendersFeatures: Hand-crafted with heavy-duty polyester fabric for durability Sun resistant, abrasion-resistant and water-resistant Washable Custom fit for a tailored look A tough 1/4" line drawstring closure Quick and easy installation *Sold as an Individual Specifications: Color: Black Box Dimensions: 1"H x 9"W x 13"L WT: 0.75 lbs UPC: 743952009959 Brochure (pdf)

Read more less

G-3 Twin Eye Fender 5.5" x 19" - Black w/Air AdapterPolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. Features:Even wall thickness for maximum strength Molded in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and permanent protected moorings Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange Unique Polyform valve for years of service. Size: 5.5" x 19" Eye Diameter: 5/8 in Circumference: 17.3 in Specifications: Color: Black Height: 5.5" Width: 19" Box Dimensions: 1"H x 3"W x 6"L WT: 2.1 lbs

Read more less

G-1 Twin Eye Fender 3.5" x 12.8" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Sand Height: 12.8" Width: 3.5" Box Dimensions: 1"H x 3"W x 6"L WT: 0.8 lbs Brochure (pdf)

Read more less

G-2 Twin Eye Fender 4.5" x 15.5" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Sand Height: 15.5" Width: 4.5 Box Dimensions: 1"H x 3"W x 6"L WT: 1.5 lbs Brochure (pdf)

Read more less

Elite Fender Cover for G-5, HTM-2, F2 and NF-5 Fenders - BlueFender covers should be as tough as the fenders they protect.  That was our criteria used in developing the Elite Fender Cover series. Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure.  Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet.  The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split.  This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.Compatible With: G-5 Fenders HTM-2 Fenders F-2 Fenders NF-5 Fenders Features: Hand-crafted with heavy-duty polyester fabric for durability Sun resistant, abrasion-resistant and water-resistant Washable Custom fit for a tailored look A tough 1/4" line drawstring closure Quick and easy installation *Sold as an Individual Specifications: Color: Blue Box Dimensions: 2"H x 9"W x 13"L WT: 0.7 lbs UPC: 743952008020 Brochure (pdf)

Read more less

G-6 Twin Eye Fender 11" x 30" - Cobalt Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 30" Width: 11" Box Dimensions: 1"H x 3"W x 6"L WT: 6.9 lbs Brochure (pdf)

Read more less

G-3 Twin Eye Fender 5.5" x 19" - Cobalt Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 5.5" x 19" (14 x 48.3cm) Eye Diameter - .625" (1.6cm) Circumference - 17.3" (43.9cm) Volume - 1.4 gallons (5.3L) Boat Size - 15' - 20' (4.6 - 6.1M) Weight - 1.9lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 19" Width: 5.5" Box Dimensions: 1"H x 3"W x 6"L WT: 1.95 lbs Brochure (pdf)

Read more less

HTM-3 Fender 10.5" x 27" - White with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm) Tube Diameter - 0.625" (1.6cm) Circumference -  33" (83.8cm) Volume -  9.2 gallons (34.8L) Boat Size - 30' - 40' (9.1 - 12.2M) Weight - 7.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 27" Width: 10.5" Box Dimensions: 1"H x 3"W x 6"L WT: 7.4 lbs Brochure (pdf)

Read more less

HTM-1 Fender 6.3" x 15.5" - Black with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 15.5" Width: 6.3" Box Dimensions: 1"H x 3"W x 6"L WT: 2.7 lbs Brochure (pdf)

Read more less

G-6 Twin Eye Fender 11" x 30" - White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 30" Width: 11" Box Dimensions: 1"H x 3"W x 6"L WT: 6.8 lbs Brochure (pdf)

Read more less

HTM-2 Fender 8.5" x 20.5" - Black with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 20.5" Width: 8.5" Box Dimensions: 1"H x 3"W x 6"L WT: 5 lbs Brochure (pdf)

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.5 lbs Brochure (pdf)

Read more less

HTM-4 Fender 13.5" x 34.8" - Blue with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  42.4" (107.8cm) Volume -  15.6 gallons (59.1L) Boat Size - 40' - 50' (12.2 - 15.2M) Weight - 10.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 34.8" Width: 13.5" Box Dimensions: 1"H x 3"W x 6"L WT: 10.5 lbs Brochure (pdf)

Read more less

HTM-3 Fender 10.5" x 27" - Blue with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm) Tube Diameter - 0.625" (1.6cm) Circumference -  33" (83.8cm) Volume -  9.2 gallons (34.8L) Boat Size - 30' - 40' (9.1 - 12.2M) Weight - 7.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 27" Width: 10.5" Box Dimensions: 1"H x 3"W x 6"L WT: 7.5 lbs Brochure (pdf)

Read more less

G-3 Twin Eye Fender 5.5" x 19" - Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 5.5" x 19" (14 x 48.3cm) Eye Diameter - .625" (1.6cm) Circumference - 17.3" (43.9cm) Volume - 1.4 gallons (5.3L) Boat Size - 15' - 20' (4.6 - 6.1M) Weight - 1.9lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 19" Width: 5.5" Box Dimensions: 1"H x 3"W x 6"L WT: 2.1 lbs Brochure (pdf)

Read more less

HTM-4 Fender 13.5" x 34.8" - Black w/AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  42.4" (107.8cm) Volume -  15.6 gallons (59.1L) Boat Size - 40' - 50' (12.2 - 15.2M) Weight - 10.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 34.8" Width: 13.5" Box Dimensions: 1"H x 3"W x 6"L WT: 10.5 lbs Brochure (pdf)

Read more less

G-6 Twin Eye Fender 11" x 30" - Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - .875" (2.2cm) Circumference - 34.6" (87.8cm) Volume - 8.5 gallons (32.2L) Boat Size - 35' - 40' (10.7 - 12.2M) Weight - 6.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 30" Width: 11" Box Dimensions: 1"H x 3"W x 6"L WT: 6.8 lbs Brochure (pdf)

Read more less

HTM-2 Fender 8.5" x 20.5" - Blue with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 20.5" Width: 8.5" Box Dimensions: 1"H x 3"W x 6"L WT: 4.95 lbs Brochure (pdf)

Read more less

Inflation AdapterPolyform Inflation Adapters can be attached to common tire pumps to inflate Polyform buoys and boat fenders. *Sold as an Individual  Owner's Manual (pdf)

Read more less

G-4 Twin Eye Fender 6.5" x 22" White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.5" x 22" (16.5 x 55.9cm) Eye Diameter - .75" (1.9cm) Circumference - 20.4" (51.9cm) Volume - 2.2 gallons (8.3L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 22" Width: 6.5" Box Dimensions: 1"H x 3"W x 6"L WT: 2.6 lbs Brochure (pdf)

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.5 lbs Brochure (pdf)

Read more less

G-3 Twin Eye Fender 5.5" x 19" - White with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 5.5" x 19" (14 x 48.3cm) Eye Diameter - .625" (1.6cm) Circumference - 17.3" (43.9cm) Volume - 1.4 gallons (5.3L) Boat Size - 15' - 20' (4.6 - 6.1M) Weight - 1.9lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 19" Width: 5.5" Box Dimensions: 1"H x 3"W x 6"L WT: 2.1 lbs Brochure (pdf)

Read more less

G-4 Twin Eye Fender 6.5" x 22" - Blue with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.5" x 22" (16.5 x 55.9cm) Eye Diameter - .75" (1.9cm) Circumference - 20.4" (51.9cm) Volume - 2.2 gallons (8.3L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.7lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 22" Width: 6.5" Box Dimensions: 1"H x 3"W x 6"L WT: 2.6 lbs Brochure (pdf)

Read more less

HTM-1 Fender 6.3" x 15.5" - Blue with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  19.8" (50.3cm) Volume -  1.8 gallons (6.8L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Blue Height: 15.5" Width: 6.3" Box Dimensions: 1"H x 3"W x 6"L WT: 2.7 lbs Brochure (pdf)

Read more less

Anchor release system for small boats in still-water fishing situations. Easy lock and release action allows anchor line adjustments with only one hand. For use with rope up to 1/2" diameter. Tough construction and roller bearing for smooth, quiet operation. Includes a No. 241 Side/Deck MountWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Raptor Jack Plate Adapter Bracket - Port - 5" Setback - 4" Rise - WhiteMounts directly to your jack plate on the starboard side of your boat providing 5 inches of setback and 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors Features: Adds 5 inches of setback from the transom and 4 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

Quick Release Fender LockStainless SteelHigh PolishFor dockside safety and convenience, Taco Marine's fender-clip ensures secure, quickly stored fender lines. The Fender clips ensure that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders their ideal position.Features: Designed for simple single hand operation Will allow easy installation and removal of float style fenders Large push-button for comfortable operation Large hole diameter for rope Limited 3 year Warranty Material Characteristics Stainless Steel Type 316 Overall height above deck: 1.60° Drain plug: 1/4" NPT This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each

Read more less

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass

Read more less

Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength andenergy absorption, and working windlass grip-hold.Applications: Docklines and anchorlinesConstruction: 8-strand NylonSpecific Gravity: 1.14 Specifications: Rope Length (Feet): 200' Rope Type: Braided Nylon Rope Diameter (Inches): 5/8" Chain - Length (Feet): 20' Chain - Diameter (Inches): 5/16" Box Dimensions: 12"H x 12"W x 12"L WT: 42.6 lbs UPC: 1000000005110 Quick Guide (pdf)Brochure (pdf)

Read more less