300W Pure Sine Wave Inverter - 12VPST Series (120 VAC)This high efficiency DC-AC inverter converts 12 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 10.5 - 16.5 VDC LED indicators for power and protections Low idle power draw Dual GFCI protected AC outlets Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Detachable cable with 12V plug adapter Detachable cable with battery clamps Safety certified to UL standards, FCC compliant Specifications: Input: 12 VDC Output: 120 VAC Watts: 300 Surge: 500 Watts Outlets: 2 Weight: 3.46 (lbs) Weight: 1.57 (kg) Dimensions: 6.1 x 9.69 x 2.58 (in) Dimensions: 155 x 246 x 65.5 (mm) Safety: ETL to UL Standard Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 300w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 12v Waveform: Pure Sine Wave Box Dimensions: 4"H x 8"W x 12"L WT: 4.9 lbs UPC: 622988072130 Owner's Manual (pdf)Brochure (pdf)

Read more less

Cut & Finish Wool Polishing Pad for Rotary Use with Polishers LH19E 180mmThe CUT & FINISH Rotary Wool Polishing Pads represent a significant leap forward in rotary pad technology, offering versatility for detailers, body shop technicians, and other applications where rotary polishes are frequently used. These pads utilize only the highest-quality, genuine merino wool fibers, refined to a consistent 20mm length and assembled in an extremely dense pattern onto a specially designed foam interface.The CUT & FINISH Pads provide an optimized balance, an exceptional cut, and a better finish than any wool rotary pad available on the market today. The unique design allows the operator to manipulate the pad in several applications and contour to panel shapes.RUPES CUT & FINISH Wool Pads are compatible with virtually all rotary-style polishers, but perform best with a low speed and high torque tool like the BigFoot LH19E. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.02 lbs UPC: 8058341049747 Quick Guide (pdf)

Read more less

115-24-10 Power SupplyThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 5.5 Maximum Input Current @230: 2.5 Output Amperage (Intermittent): 10 Output Amperage (Continuous): 4 Weight: 20 lbs. / 9.1 kg Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 24.5 VDC (Internally adjustable 21-27.5 VDC) Ripple: 70mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PT-25W Battery ChargerNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.Features: 12-volt model “Smart” circuitry provides three-stage charging – bulk, absorption, and float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current. (Except PT-7) The optional sensor adjusts the output voltage based on battery temperature. (Except PT-7) Current limitations prevent damage from overloading Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line Built to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 90-132 or 180-264 Input Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4 Power Factor: .7 Max Output Amps: 25 Output Banks: 3 Battery Capacity (Amp-Hours): 50-250 Operating Temp. Rating Reference: T-4 Case Size Reference: A-2 Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth Weight Lbs./Kg: 8.2/4 Optional Temp. Sensor Model: TCS-12/24                 Remote Panel Model: RP Equalize Option: Yes Output Indicator Reference: M-3 Compliance Reference: CG Temperature Rating References: Temperature: -20 degrees C to +60 degrees C Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load Compliance References: CG: USCG CFR 183.410 (Ignition protected) CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options: Remote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W) Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 25a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 10"H x 10"W x 16"L WT: 9.5 lbs Owner's Manual (pdf)

Read more less

RitchieSport CompassFeatures: 2″ (51 mm) Direct-Reading, High Visibility Dials Two-Sided, Self-Adhesive Mounting Pads Included Reversible Bracket allows a mounting range of over 300 degrees from overhead, through angled and vertical mounts to horizontal surfaces These mounting position options and your choice of mounting hardware permit mounting on everything from windshield or supporting frame structures, to slanted dashboards and consoles, to almost any flat, angled or vertical surface Internal Green Night Lighting High Temp Composite Construction for Extended Operating Range Hardened Steel Pivot and Sapphire Jewel Movement Built-in Compensators Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 5 oz. (142g) Notes: Comes standard with 12v green lighting. Specifications: Backlight: Yes Lubber Lines: Yes Mounting Style: Bracket Read: Front Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 010342170002 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

TRUEcharge™3 60A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 60 A  Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings  Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4  Minimum Recommended Battery Bank Size: 120 Ah  General Specifications: Operating Temperature Range: 0–60°C (32–140°F)  Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 90 x 170 x 340 mm (3.5 x 6.7 x 13.4”) Weight 4.5 kg (9.9 lb) Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 60a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 7"H x 11"W x 17"L WT: 8.95 lbs UPC: 715535920852 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

TastePURE 50' Drinking Water HoseThis 50-foot Camco drinking water hose has a 1/2-inch ID and is reinforced for maximum kink resistance. Made of NSF-certified FWH hose, this PVC hose is lead-free, BPA-free, phthalate-free, and certified to NSF/ANSI/CAN 61 for drinking water.Features: Reinforced for maximum kink resistance; includes an easy grip swivel female connector; UV stabilized for long life Compliant with All Federal and State-Level Low Lead Laws: CSA low lead content certified to NSF/ANSI 372 Made in the USA Specifications:Measurements: 50 feet long with a 1/2-inch ID Specifications: ID Diameter (inches): 1/2" Length (Feet): 50' Box Dimensions: 3"H x 12"W x 12"L WT: 4.7 lbs UPC: 014717227537

Read more less

Bigfoot Tool Bag - SilverA durable, foldable, rectangular carrying bag with the RUPES logo prominently displayed on the side, along with the BigFoot logo. The bag is made from a robust, silver-gray fabric, designed for carrying tools, consumables, and accessories. It features a black, adjustable shoulder strap along with two short handles for versatile carrying options. The top of the bag has a zippered closure, providing easy access to the main compartment and to the other internal pockets.The front includes a small exterior pocket. The bag is designed to be foldable, making it convenient for storage or transport when not in use. This functionality makes it ideal for professionals who require flexibility in transporting and storing detailing and polishing equipment.Dimensions: Open bag: 26cm x 50cm x 27cm Folded bag: 7cm x 50cm x 27cm

Read more less

Waterless Wash & Wax - 32oz Spray BottleCustom formula conveniently and gently washes and adds wax protection in one easy step. Simply spray it on and wipe it off. Can be used anywhere with no hose, bucket, or rinsing. Available in 32 oz. spray bottles and 1-gallon refills. Can be used on glossy paints and clear coat finishes, glass, chrome, polished metals, and plastic trim.

Read more less

Sani-Con Turbo 400S Permanent Macerating Waste Water Evacuation SystemMacerating pump system designed for permanent installation.Features: Bayonet-mount waste evacuation system Permanent installation without cutting the sewer outlet of the RV 1/2-hp pump helps evacuate waste from tanks Can be connected to the generator or a 12V battery Hose and nozzle assembly with nozzle caps Reliable macerating pump pushes out waste Includes switch box assembly, rubber coupling with clamps, 35-AMP fuse, and 2 electrical connectors, hanger strap, pipe hanger, and 1/4" bolt and nut Compact 1.5" diameter hose extends to 21' for easy access to dump station Discharge nozzle fits six dump station inlet sizes, including a garden hose extension This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

HD Magnetic MountFeatures: Heavy Duty Phone Dock Portable Dash & Window Magnet Mount Magnet holder with adjustable support feet features a 25lb Rare Earth Magnet that securely holds your device, with or without a case Temporbond™ suction cup works on most smooth or textured surfaces Includes metal mounting plates that securely attach to device for strongest possible hold WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PRO Series InvertersPerformance inverters designed for RVs and boatsDesigned for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. DescriptionThe Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1800W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features Inverter easily powers TVs, small appliances, and other electronics Built-in 15A circuit breaker to protect GFCI connected loads Up to 25A pass through for hardwired loads Digital remote control displays power output, AC source and battery voltage Detachable remote control can be mounted wherever convenient Conformal coated electronics provide moisture resistance Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included) Protection Features Battery over-voltage and under-voltage protection Over temperature shutdown Automatic overload protection Short-circuit protection Ground fault protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Inverter Input Voltage: 12v Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 3600w Waveform: Modified Sine Wave Inverter Output Voltage: 120v AC Connection Type: Hardwire Inverter Cont. Output Wattage: 1800w Box Dimensions: 6"H x 10"W x 18"L WT: 13 lbs UPC: 715535113537 Owner's Manual (pdf)Brochure (pdf)

Read more less

CFX5 35 Ice-Free 35L Electric Cooler - BlackThe CFX5 35L is a super-versatile size – holds up to 50 cans and is easy to carry – make it your ice-free electric cooler for camping trips and family outings. The highly efficient Vacuum Insulated Panels deliver outstanding insulation, the lid’s gasket seals tightly, and the compressor takes you down to -7°F. Control it with our smartphone app and stay adventure-ready.Features: The 35L capacity holds up to 50 x 12 oz cans – a versatile size for up to four people’s weekend adventures and long solo trips. Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery or allows deep draw on dual batteries. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Single Advanced Materials and Design in an Ice-Free 35L Electric Cooler Refrigeration technology - Compressor Warranty - 5 Year Limited Technical Specifications: Product Dimensions - 27.32" (D) x 16.02" (H) x 15.67" (W) Product Weight - 36.60lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 0.90A at 100V, 0.38A at 240V Rated Input Current (DC) - 3.4A at 24V, 7.6A at 12V Rated Input Power - 47W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 17"H x 18"W x 28"L WT: 42.5 lbs UPC: 034223507541 Owner's Manual (pdf)

Read more less

iBrid Nano Polisher HR81M Long Neck Kit with 3 Different Movements 120V Power SupplyThe iBrid Nano Polisher Long Neck Bigfoot is more than just technology; it’s a design philosophy that will lead us into the future evolution of RUPES. Mini polisher is considered one of the most versatile on the market today, thanks to several factors such as the functionality as both battery-powered and cord-powered tool. More possibilities can be configured with 3 different functional movements, including 3mm random orbital, 12mm random orbital, and rotary.Those movements can then be coupled with a variety of backing plates and brush attachments for various tasks. Orbital movement, rotary movement, polishing, sanding, cleaning, all-in-one compact, easy-to-use system.The iBrid Nano Polisher Long Neck with so much versatility combined into a compact, ergonomic, and lightweight device. The iBrid Nano is the ultimate tool, allowing users to work on difficult-to-reach areas, tight spaces, intricate details, and all the surfaces where a regular-sized corded tool would not work.What's Included? AC-DC adaptor (9HP120LT) Functional Unit Ø12mm orbit (58.390/C) Polishing backing pad Ø50mm (2”)(996.001) Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 7"W x 15"L WT: 4 lbs UPC: 8051499569570

Read more less

Marine XC-100 Extra Cut Compound 1000ml/33.8ozThe RUPES MARINE XC-100 Extra-Cut Compound is a powerful solution tailored for heavy-duty sanding mark removal on gelcoat surfaces. Specifically engineered to remove P800/P1000 sanding marks, this compound excels in challenging applications, including freshly applied gelcoat and mold maintenance. The MARINE XC-100 is the ultimate choice for professionals in boat manufacturing and maintenance.*For removing P800/P1000 sanding marks on production and heavily oxidized gelcoat Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.4 lbs UPC: 8050246740903

Read more less

Corded Power Adapter for 18V Battery ToolsPower supply for 18V battery tools. Specifications: Type: Battery & Electrical Box Dimensions: 3"H x 6"W x 9"L WT: 2 lbs UPC: 8059519687747

Read more less

Uno Pure Ultra-Fine Finishing Polish 1000ml/33.8ozUNO PURE is a universally compatible, ultra-fine abrasive polish designed for use on all tool types, including Rotary, Random Orbital, or Gear-Driven Orbital. The proprietary formula developed and blended in-house by RUPES uses the latest in abrasive technology to produce the highest possible optical clarity and reflectivity when used with RUPES BigFoot polishing system tools and pads.UNO PURE is ideal for very soft or haze-prone paints or can be used in jeweling applications to create a show car finish, even on dark colors. The absence of fillers, ease of use, easy wipe-off, ensure the best user experience, and body shop safe formulation make it the ideal solution for a variety of applications.Features: Universal across all BigFoot Polishing System Movements Smooth user experience with easy wipe-off Unmatched finishing quality, even on the softest paint systems Validated for all paint types, including single-stage, clearcoat, hard, soft, or “sticky” paints Versatile applications, change the pad to change the performance No intentional filling ingredients or protective properties. Leaves the finish “PURE” and ready for the application of a protective product For best results, use with RUPES Ultra-Fine White Finishing Foam Pads Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 10"L WT: 2.2 lbs UPC: 8058341049303 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Bigfoot Claw Pad Tool with Nylon Brush & Pad Blade - No HolderA multi-function tool designed to promote efficiency.The BigFoot Claw Pad Tool features a brush for clearing compound residues from pads to maintain consistent polishing performance, and on the other end, a “claw” used to separate the pads from the backing plate.Available with or without the belt-mounted holding pouch, the BigFoot Claw Pad Tool is a simple tool that can have a serious impact on your efficiency. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 3"W x 9"L WT: 0.2 lbs UPC: 8058341046098

Read more less

Uno Pure Ultra-Fine Finishing Polish 250ml/8.5ozUNO PURE is a universally compatible, ultra-fine abrasive polish designed for use on all tool types, including Rotary, Random Orbital, or Gear-Driven Orbital. The proprietary formula developed and blended in-house by RUPES uses the latest in abrasive technology to produce the highest possible optical clarity and reflectivity when used with RUPES BigFoot polishing system tools and pads. UNO PURE is ideal for very soft or haze-prone paints or can be used in jeweling applications to create a show car finish, even on dark colors. The absence of fillers, ease of use, easy wipe-off, ensure the best user experience, and body shop safe formulation make it the ideal solution for a variety of applications.Features: Universal across all BigFoot Polishing System Movements Smooth user experience with easy wipe-off Unmatched finishing quality, even on the softest paint systems Validated for all paint types, including single-stage, clearcoat, hard, soft, or “sticky” paints Versatile applications, change the pad to change the performance No intentional filling ingredients or protective properties. Leaves the finish “PURE” and ready for the application of a protective product For best results, use with RUPES Ultra-Fine White Finishing Foam Pads Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 2"W x 7"L WT: 0.5 lbs UPC: 8058341049310 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A System Microfiber Towel 16x16 - YellowThese microfiber cloths are made from premium microfiber material. Each towel features an embossed Bigfoot logo and edgeless, scratch-free design. The material, weave, and gram-weight of each towel were selected to complement the RUPES range of compounds and polishes and provide an outstanding balance of performance and utility. Starting from January 2021, the current 4-towel pack (code 9.BF9010/4) and all the tool kits that include the product code 9.BF9010/4, will be updated with the introduction of the new microfiber cloths. Each Microfiber Towel will be packed individually inside a flowpack metallic film package to ensure maximum protection.YELLOW TOWEL – Microfiber Polishing Cloth – 9.BF9060 A premium quality, short knap microfiber yellow cloth for the removal of compound and polish residues. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 7"W x 7"L WT: 0.1 lbs UPC: 8059519682223

Read more less

Power Supply for Nano HR81M & HR81ML iBrid Nano ToolsPower supply for Nano. Specifications: Type: Battery & Electrical Box Dimensions: 4"H x 6"W x 9"L WT: 1.6 lbs UPC: 8058341043318

Read more less

Rechargeable Li-Ion Power Pack - 18V/5ARechargeable power pack. Specifications: Type: Battery & Electrical Box Dimensions: 3"H x 3"W x 5"L WT: 1.6 lbs UPC: 3072519689042

Read more less

iBrid Nano Rechargeable Power Pack - 10.8V, 2AHiBrid Nano rechargeable power pack. Specifications: Type: Battery & Electrical Box Dimensions: 2"H x 3"W x 4"L WT: 0.4 lbs UPC: 8059519685873

Read more less

D-A Fine High Performance Fine Polishing Compound 250ml/8.5ozRUPES D-A FINE is the result of extensive testing to develop a fine polish that combines noticeable cutting performance with impressive finishing. The proprietary formula developed and blended in-house by RUPES is designed to perform with Dual Action polishers, including both large-stroke random orbital and gear-driven tools. Color-coordinated to RUPES yellow foam, wool, and microfiber pads, DA-FINE delivers excellent defect removal, incredibly high finish quality, and a super-easy wipe off for an excellent user experience. DA-FINE represents the perfect second polishing step after DA-COARSE on virtually every type of painted, gelcoat, or varnished finish or as a stand-alone solution for light polishing needs.Features: Excellent cutting performance relative to most “fine” polishing compounds Micro-abrasive technology and proprietary blend enhance finishing ability Easy wipe-off, for fewer towel marks on soft paints or delicate surfaces Easy application when used with the RUPES color-coordinated pad system One-step light defect removal and finishing on most paints Can also be excellent 2nd step polish following D-A Coarse Compound Recommended for use with BigFoot Random Orbital or Gear-Driven tools *Use with all dual-action polishers Specifications: Type: Restoration & Compounds Box Dimensions: 2"H x 2"W x 7"L WT: 0.6 lbs UPC: 8058341049297 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Battery Charger for iBrid Mini Batteries with LED IndicatorsThe 9.HC180LT Battery Charger is custom-designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides a 100% charge from zero to full in approximately 35 minutes. Specifications: Type: Battery & Electrical Box Dimensions: 3"H x 6"W x 9"L WT: 2 lbs UPC: 8059519686849

Read more less

HLR75 Mini Rechargeable Power Pack - 18V, 2.5AHRechargeable power pack for HLR75. Specifications: Type: Battery & Electrical Box Dimensions: 3"H x 3"W x 5"L WT: 0.8 lbs UPC: 8059519686191

Read more less

Marine XC-300 Fast-Cut Compound 1000ml/33.8ozThe RUPES MARINE XC-300 Fast-Cut Compound is a high-performance polishing solution designed specifically for marine applications. Engineered to deliver exceptional results on gelcoat and painted surfaces, this advanced compound effectively removes P1200/P1500 or finer sanding marks, restoring the finish to a brilliant gloss. Perfect for boatyards and marine detailing projects, MARINE XC-300 is the go-to compound for tackling heavy imperfections and achieving a flawless surface preparation.*For removing P1200/P1500 or finer sanding marks on productions and oxidized gelcoat and painted boats Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.4 lbs UPC: 8050246740910

Read more less

D-A Coarse High Performance Cut Polishing Compound 1000ml/33.8ozRUPES D-A COARSE is the latest high-performance compound from RUPES designed for maximum efficiency. This fast-cutting compound is ideal for users who want quick defect removal and a smooth user experience on every type of paint. The formulation is optimized to achieve the best performance if used with RUPES Coarse blue foam, DA wool pads, or coarse microfiber discs together with BigFoot Dual Action Polishers, including both random orbital and gear-driven tools.D-A Coarse represents a significant advancement in the world of cutting compound performance and finishes with excellent clarity, low dusting, and easy wipe-off.Features: High-performance cutting compound Durable lubrication system for an extended polishing cycle and longer working time Low-dusting formula reduces post-compound cleanup work One-step moderate-to-severe defect removal and finishing on most paints Sanding mark and severe defect removal Recommended for random orbital or gear-driven polishers *Use with all dual-action polishers Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.6 lbs UPC: 8058341049266 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A System Microfiber Towel 16x16 - BlueThese microfiber cloths are made from premium microfiber material. Each towel features an embossed Bigfoot logo and edgeless, scratch-free design. The material, weave, and gram-weight of each towel were selected to complement the RUPES range of compounds and polishes and provide an outstanding balance of performance and utility. Starting from January 2021, the current 4-towel pack (code 9.BF9010/4) and all the tool kits that include the product code 9.BF9010/4, will be updated with the introduction of the new microfiber cloths. Each Microfiber Towel will be packed individually inside a flowpack metallic film package to ensure maximum protection.BLUE TOWEL – Microfiber Polishing Cloth – 9.BF9050 A premium quality, short knap microfiber blue cloth for the removal of compound and polish residues. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 7"W x 7"L WT: 0.1 lbs UPC: 8059519682216

Read more less

Wash & Decontamination MittThe RUPES Wash & Decontamination Mitt is an all-in-one solution to wash and decontaminate your vehicle. Use the plush synthetic microfiber side to gently remove grime, road tar, and dirt; use the synthetic clay side to remove stubborn embedded contaminants that regular washing won’t remove. This versatile Wash Mitt provides an efficient and effective approach to cleaning.Features: Saves time and effort with dual-purpose design Prepares the surface for paint correction and/or application of surface protection Removes road grime and embedded surface contamination Use the synthetic microfiber side with M101, M707, or equivalent automotive soap to safely remove dirt and road film. The soft synthetic microfibers enhance the ability of any shampoo to safely release surface contamination without scratching or dulling the surface.SYNTHETIC CLAY SIDE FOR DECONTAMINATIONOnce the vehicle has been rinsed free of dirt, switch to the synthetic clay side. Lubricate the surface before using an appropriate spray or clean soap and water mixture. Gently rub the synthetic clay side of the Wash Mitt across the surface to remove embedded contamination until it feels smooth. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 8"W x 11"L WT: 0.2 lbs UPC: 8059519686429 Quick Guide (pdf)

Read more less

Battery Charger for Nano Batteries with LED IndicatorsCharger for Nano. Specifications: Type: Battery & Electrical Box Dimensions: 5"H x 8"W x 8"L WT: 1.4 lbs UPC: 8058341043387

Read more less

Random Orbital Polisher Bigfoot HLR21 iBrid Tool Plus Charger & 2-BatteriesThe iBrid Rupes BigFoot polishers, a true game-changer in the world of polishing applications. This compact yet powerful tool seamlessly combines cordless and corded capabilities, offering freedom and reliability. Whether you’re a professional or an enthusiast, this polisher elevates your work to a new level. Experience unparalleled performance, ergonomic design, and adaptability like never before. Welcome to the future of surface care with the iBrid Rupes BigFoot polishers.Features: Eccentric set Anti-spinning ring In-runner brushless motor Gear technology Led indicator Li-ion battery 18V Experience the convenience and power of the BigFoot iBrid system. This advanced 18V battery system delivers 5 Ah for extended, uninterrupted operation. With an impressive 40-minute battery life at full power, it’s designed for crucial tasks, offering consistent performance even in demanding conditions, with rapid recharge cycles. Its efficient design optimizes workflow and boosts productivity.The BigFoot iBrid polisher, powered by this high-performance battery, consistently excels in challenging applications. Complementing this system is the dual battery charger, which utilizes cutting-edge battery cell technology for lightning-fast charging. It prioritizes the highest voltage battery, ensuring a fully charged, high-capacity power source is always available.What's In The Box? iBrid HLR21 (9.HLR21)  Dual battery charger (9HC185LT)  2 x Rechargeable power pack (9HB185LT) Specifications: Type: Tools & Accessories Box Dimensions: 8"H x 9"W x 18"L WT: 12.3 lbs UPC: 8050246740064 Owner's Manual (pdf)Brochure (pdf)

Read more less

D-A Coarse High Performance Cut Polishing Compound 250ml/8.5ozRUPES D-A COARSE is the latest high-performance compound from RUPES designed for maximum efficiency. This fast-cutting compound is ideal for users who want quick defect removal and a smooth user experience on every type of paint. The formulation is optimized to achieve the best performance if used with RUPES Coarse blue foam, DA wool pads, or coarse microfiber discs together with BigFoot Dual Action Polishers, including both random orbital and gear-driven tools.D-A Coarse represents a significant advancement in the world of cutting compound performance and finishes with excellent clarity, low dusting, and easy wipe-off.Features: High-performance cutting compound Durable lubrication system for an extended polishing cycle and longer working time Low-dusting formula reduces post-compound cleanup work One-step moderate-to-severe defect removal and finishing on most paints Sanding mark and severe defect removal Recommended for random orbital or gear-driven polishers *Use with all dual-action polishers Specifications: Type: Restoration & Compounds Box Dimensions: 2"H x 2"W x 7"L WT: 0.6 lbs UPC: 8058341049273 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A System Microfiber Towel 16x16 - WhiteThese microfiber cloths are made from premium microfiber material. Each towel features an embossed Bigfoot logo and edgeless, scratch-free design. The material, weave, and gram-weight of each towel were selected to complement the RUPES range of compounds and polishes and provide an outstanding balance of performance and utility. Starting from January 2021, the current 4-towel pack (code 9.BF9010/4) and all the tool kits that include the product code 9.BF9010/4, will be updated with the introduction of the new microfiber cloths. Each Microfiber Towel will be packed individually inside a flowpack metallic film package to ensure maximum protection.WHITE TOWEL – Microfiber Polishing Cloth – 9.BF9070 A premium quality, dual-pile microfiber white cloth. One side features a short weave for breaking up compound and polish residues. The other side features a more plush weave for final wipe down and surface inspection. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 7"W x 7"L WT: 0.2 lbs UPC: 8059519682230

Read more less

Marine XP-700 Nano Protection 1000ml/33.8ozMarine Nano Protection is the ultimate protection step in the RUPES MARINE System, providing up to 6 months of durability. Its proprietary blend of waxes, sealants, and nano-particles delivers UV protection, high gloss, hydrophobic water beading, and improved optical clarity. It enhances the surface’s smoothness, making cleaning effortless, and can be applied by hand or machine for professional-grade results on any vessel. Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 10"L WT: 2.2 lbs UPC: 8050246740934

Read more less

Bigfoot HLR75 Mini iBrid Polisher Kit BetaThe RUPES BIGFOOT HLR75 iBRID MINI POLISHER represents the evolution of RUPES tools with iBrid dual-power technology. Ideally suited for polishing applications in curves, contours, and compact spaces, the HLR75 iBrid Mini features a 12mm orbit and an Ø75mm (3-inch) backing plate for maneuverability and precise control.The RUPES Patented iBrid Technology concept, first featured on the BigFoot iBrid Nano family of tools, increases process efficiency and optimizes the user experience by giving technicians the option to choose the power platform that best suits the specific situation or application. Use battery power for cordless operation or insert the iBrid Power Adapter and run continuously on corded power. The output and performance of the iBrid Mini are identical regardless of power choice thanks to a specialized motor platform designed, developed, and manufactured in-house by RUPES.The HLR75 features a revolutionary design for the polishing world unlike any polishing tool seen before. Ergonomics have been optimized by reimaging polisher design. The BigFoot HLR75 iBrid Mini Polisher is extremely comfortable and easy to use in a variety of grip and hand positions. The unique design provides incredible maneuverability and balance to guarantee precise and efficient polishing results while minimizing operator fatigue.iBRID TECHNOLOGYInnovative iBrid Technology allows the RUPES iBrid family of tools to be configured to run on either battery or corded power. Unlike battery-only tools or corded-only tools, iBrid tools allow the operator to choose their preferred power platform or switch from one power source to another. Performance is identical regardless of power source.DESIGN AND ERGONOMICSIn-dept studies and research in ergonomics have resulted in a reimagined polishing tool form factor. Modern lines and carefully considered hand positions are combined with exceptional technical quality to create a polisher that changes the way we look at tool design and what we expect in terms of user comfort. Creating a high-gloss shine has never felt better.MAXIMUM FLEXIBILITYThe HLR75 is perfect for polishing applications on curved surfaces or compact areas where full-sized polishers are not effective or safe. The small tool dimensions, 12mm orbital stroke, and Ø75mm (3-inch) backing plate allow the iBrid Mini to maximize efficiency and effectiveness of polishing operations, especially on today’s complex modern car designs.ELECTRONIC SPEED CONTROL MODULEThe speed control dial is highly visible and easy to adjust. It allows the operator to select or change the speed of the polisher without interrupting the application process.THROTTLE LEVERDerived from actuator levers commonly seen on pneumatic tools, the ergonomic and rubberized variable speed lever provides precise control and full operator comfort while adding a layer of safety that will de-activate the tool in the event it is dropped or slips from the operator’s grip.BATTERY AND BATTERY CHARGELithium-ion battery cells (18V 2.5Ah) with LED indicators show the charge level with the push of a button. A full charge allows for between 35 and 45 minutes of continuous operating time.The HLR75 iBrid Mini Battery Charger is custom designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides 100% charge from zero to full in approximately 35 minutes. Specifications: Type: Tools & Accessories Box Dimensions: 10"H x 12"W x 16"L WT: 13.4 lbs UPC: 8059519685880 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Marine XP-900 Polymer Spray Sealant 500ml/16ozA versatile protection product in the Marine System offering up to 3 months of durability. Safe for gelcoat, metal, glass, vinyl, and painted surfaces, it provides UV protection, high gloss, and a smooth, hydrophobic finish for effortless cleaning. Its proprietary polymer sealant and nano-particle blend enhance optical clarity and water beading. With an easy spray-on, wipe-off application, it can also be used on wet surfaces as a drying aid while adding protection. For optimal results, reapply every 1-3 months or use as a topper to extend the durability of RUPES Marine Wax. Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 7"L WT: 1.2 lbs UPC: 8050246740941

Read more less

Reveal Lite-Residue Remover - 750mlREVEAL LITE is a surface preparation and cleaning spray specifically formulated to remove compound and polish oils, residues, waxes, non-durable fillers, and other surface contamination remaining on surfaces before or after correction. It also works great as an exterior glass cleaner.Tips for Success: REVEAL LITE, spray generously onto the surface to be cleaned (if the surface is freshly painted, spray onto a towel, then wipe, do not spray directly on the surface). Wipe immediately with a clean, soft, microfiber polishing cloth until dry. Inspect surface and repeat treatment as necessary. Specifications: Type: All Purpose Box Dimensions: 3"H x 3"W x 8"L WT: 1.6 lbs UPC: 8059519685637 Quick Guide (pdf)

Read more less

Pneumatic Mini Random Orbital Polisher 15mm Orbit (Tool Only)Features: Pneumatic mini random orbital polisher Ø orbit 15 mm High-efficiency motor with high torque delivered Unique design and ergonomic control lever for safe and comfortable handling On board service spanner for quick tool servicing Swivelling air outlet silencer designed for low noise level with no performance losses Special punched back-up pad to dissipate the polishing overheating with an M6 bolt Front body housing with soft touch plate for the best handling The grip in shock-resistant transparent polycarbonate is completely insulated from air lines to prevent cooling Specifications: Max consumption air (l/min): 320 Weight (kg): 0,650 R.P.M.: 0 – 11000 Working pressure (bar): 6 Ø orbit (mm): 15 Ø backing pad (mm): 75 Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 4"W x 10"L WT: 2.2 lbs UPC: 8051499562793 Owner's Manual (pdf)

Read more less

Marine XF-500 Fine Polish 1000ml/33.8ozThe RUPES MARINE XF-500 Fine Polish is a premium polishing solution designed for achieving a flawless final finish on gelcoat and painted surfaces. Specifically formulated to deliver exceptional clarity and gloss, it is the ideal final step after using coarse compounds, ensuring a mirror-like finish on boats and yachts. Perfect for detailers, OEMs, and boatyards, the MARINE XF-500 Fine Polish delivers outstanding results on gelcoat and painted boats as the final step in a polishing process. Whether you’re restoring a vessel’s finish or adding the finishing touch to a freshly polished surface, this compound ensures a stunning, professional-grade appearance.*For final finishing on gelcoat and painted boats Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 10"L WT: 2.2 lbs UPC: 8050246740927

Read more less

D-A Fine High Performance Fine Polishing Compound 1000ml/33.8ozRUPES D-A FINE is the result of extensive testing to develop a fine polish that combines noticeable cutting performance with impressive finishing. The proprietary formula developed and blended in-house by RUPES is designed to perform with Dual Action polishers, including both large-stroke random orbital and gear-driven tools. Color-coordinated to RUPES yellow foam, wool, and microfiber pads, DA-FINE delivers excellent defect removal, incredibly high finish quality, and a super-easy wipe off for an excellent user experience. DA-FINE represents the perfect second polishing step after DA-COARSE on virtually every type of painted, gelcoat, or varnished finish or as a stand-alone solution for light polishing needs.Features: Excellent cutting performance relative to most “fine” polishing compounds Micro-abrasive technology and proprietary blend enhance finishing ability Easy wipe-off, for fewer towel marks on soft paints or delicate surfaces Easy application when used with the RUPES color-coordinated pad system One-step light defect removal and finishing on most paints Can also be excellent 2nd step polish following D-A Coarse Compound Recommended for use with BigFoot Random Orbital or Gear-Driven tools *Use with all dual-action polishers Specifications: Type: Restoration & Compounds Box Dimensions: 1"H x 3"W x 3"L WT: 2.4 lbs UPC: 8058341049280 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

D-A Medium Wool Polishing Pad 160mm - YellowThe medium wool polishing pads, suitable for dual action tools, are specifically crafted for the removal of moderate defects. The yellow foam of the medium wool pad is highly flexible, facilitating enhanced control on curves and contours. Additionally, it offers a softer support for improved finishing capabilities.Within the range of yellow medium wool pads, a uniform 15mm fiber length is maintained across the entire surface of the pads. This combination of soft and flexible wool, along with a gentle yellow foam backing, ensures not only effective removal of moderate defects but also excellent finishing results on a variety of surfaces.*Use with polishers LHR21, LK900E Specifications: Type: Buffers & pads Box Dimensions: 1"H x 7"W x 7"L WT: 0.5 lbs UPC: 8059519688539 Quick Guide (pdf)

Read more less

Random Orbital Polisher Bigfoot HLR21 iBrid Tool (Tool Only)The iBrid Rupes BigFoot polishers, a true game-changer in the world of polishing applications. This compact yet powerful tool seamlessly combines cordless and corded capabilities, offering freedom and reliability. Whether you’re a professional or an enthusiast, this polisher elevates your work to a new level. Experience unparalleled performance, ergonomic design, and adaptability like never before. Welcome to the future of surface care with the iBrid Rupes BigFoot polishers.Features: Eccentric set Anti-spinning ring In-runner brushless motor Gear technology Led indicator Li-ion battery 18V Experience the convenience and power of the BigFoot iBrid system. This advanced 18V battery system delivers 5 Ah for extended, uninterrupted operation. With an impressive 40-minute battery life at full power, it’s designed for crucial tasks, offering consistent performance even in demanding conditions, with rapid recharge cycles. Its efficient design optimizes workflow and boosts productivity.The BigFoot iBrid polisher, powered by this high-performance battery, consistently excels in challenging applications. Complementing this system is the dual battery charger, which utilizes cutting-edge battery cell technology for lightning-fast charging. It prioritizes the highest voltage battery, ensuring a fully charged, high-capacity power source is always available. Specifications: Type: Tools & Accessories Box Dimensions: 7"H x 8"W x 16"L WT: 5 lbs UPC: 850056581189 Owner's Manual (pdf)Brochure (pdf)

Read more less

Bigfoot HLR75 Mini iBrid Polisher 1-Charger 2-Battery PackThe RUPES BIGFOOT HLR75 iBRID MINI POLISHER represents the evolution of RUPES tools with iBrid dual-power technology. Ideally suited for polishing applications in curves, contours, and compact spaces, the HLR75 iBrid Mini features a 12mm orbit and an Ø75mm (3-inch) backing plate for maneuverability and precise control.The RUPES Patented iBrid Technology concept, first featured on the BigFoot iBrid Nano family of tools, increases process efficiency and optimizes the user experience by giving technicians the option to choose the power platform that best suits the specific situation or application. Use battery power for cordless operation or insert the iBrid Power Adapter and run continuously on corded power. The output and performance of the iBrid Mini are identical regardless of power choice, thanks to a specialized motor platform designed, developed, and manufactured in-house by RUPES.The HLR75 features a revolutionary design for the polishing world, unlike any polishing tool seen before. Ergonomics has been optimized by reimaging polisher design. The BigFoot HLR75 iBrid Mini Polisher is extremely comfortable and easy to use in a variety of grip and hand positions. The unique design provides incredible maneuverability and balance to guarantee precise and efficient polishing results while minimizing operator fatigue.iBRID TECHNOLOGYInnovative iBrid Technology allows the RUPES iBrid family of tools to be configured to run on either battery or corded power. Unlike battery-only tools or corded-only tools, iBrid tools allow the operator to choose their preferred power platform or switch from one power source to another. Performance is identical regardless of power source.DESIGN AND ERGONOMICSIn-depth studies and research in ergonomics have resulted in a reimagined polishing tool form factor. Modern lines and carefully considered hand positions are combined with exceptional technical quality to create a polisher that changes the way we look at tool design and what we expect in terms of user comfort. Creating a high-gloss shine has never felt better.MAXIMUM FLEXIBILITYThe HLR75 is perfect for polishing applications on curved surfaces or compact areas where full-sized polishers are not effective or safe. The small tool dimensions, 12mm orbital stroke, and Ø75mm (3-inch) backing plate allow the iBrid Mini to maximize efficiency and effectiveness of polishing operations, especially on today’s complex modern car designs.ELECTRONIC SPEED CONTROL MODULEThe speed control dial is highly visible and easy to adjust. It allows the operator to select or change the speed of the polisher without interrupting the application process.THROTTLE LEVERDerived from actuator levers commonly seen on pneumatic tools, the ergonomic and rubberized variable speed lever provides precise control and full operator comfort while adding a layer of safety that will deactivate the tool in the event it is dropped or slips from the operator’s grip.BATTERY AND BATTERY CHARGELithium-ion battery cells (18V 2.5Ah) with LED indicators show the charge level with the push of a button. A full charge allows for between 35 and 45 minutes of continuous operating time.The HLR75 iBrid Mini Battery Charger is custom-designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides a 100% charge from zero to full in approximately 35 minutes.What's In The Box? HLR75 iBrid Mini (9.HLR75) Battery charger (9HC180LT) 2x Rechargeable power pack (9HB180LT) Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 12"W x 17"L WT: 6.8 lbs UPC: 8059519684432 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Random Orbital Polisher Bigfoot Mini (Tool Only)The LHR 75E is the polisher for difficult shapes and for spot repair operations. The LHR 75E is a must for any detailer wishing to obtain perfect results, even in the most difficult areas. The 12mm orbit, combined with RUPES accessories and consumables, achieves quick results on areas such as mudguards, front panels, etc.ELEGANTLY DESIGNEDWith its nonslip rubber inserts on the front cover, the LHR 75E it is perfect for all polishing operations in difficult-to-reach areas. The operator can work in perfect comfort to produce the best possible results.ON-OFF SWITCH LOCKLined in non-slip rubber, the on/off lever of the BigFoot polisher ensures a controlled soft start, giving the operator full control over the tool.MAXIMUM FLEXIBILITYThanks to the backing pad with a small diameter, the LHR 75E is perfect for polishing applications on small and intricate areas. The small machine dimensions and the 12mm orbit allow comfortable handling and accuracy in detail polishing.ELECTRONIC SPEED CONTROL MODULEThe speed controller is both practical and easy to use. The speed of the polisher can also be easily adjusted without interrupting the work.DESIGNThe attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with several details that are the result of meticulous research aimed at achieving maximum operator comfort. The non-slip rubber inserts are numerous and have many functions. In particular, the insert on the machine body is used to support the polisher when placed on a surface.Specifications: Backing pad thread: M6 Weight (kg): 2,3 R.P.M.: 4000-5500 Power (W/hp): 400 Ø orbit (mm): 12 Ø backing pad (mm): 75 Specifications: Type: Tools & Accessories Box Dimensions: 7"H x 7"W x 16"L WT: 6.8 lbs UPC: 8051499564575 Owner's Manual (pdf)Brochure (pdf)

Read more less

Rotary Fine Polishing Foam Pad 175/180mm - YellowThe Fine Foam Polishing Pads for Rotary are designed to eliminate moderate surface defects and imperfections while restoring high gloss. The new foam structure provides a smooth and comfortable polishing experience. They are ideal for the BigFoot Fine Rotary Polishing Compound and the LH19E rotary polisher.These pads feature a completely new foam formulation, specifically optimized for rotary applications. Open-cell foam materials were chosen to minimize excessive heat, while the pad profile helps prevent accidental contact between the backing plate and the working surface.*Use with rotary polishers LH19E, LH22N, LH22EN with Ø 165 mm backing pad Specifications: Type: Buffers & pads Box Dimensions: 1"H x 7"W x 7"L WT: 0.01 lbs Quick Guide (pdf)

Read more less

Random Orbital Backing Pad 75mm/3" Velcro Pad M6 for LHR75-LHR75E ToolsBacking pad 75mm with velcro pad M6 for LHR75-LHR75E tools. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs UPC: 8051499565848

Read more less

iBrid Nano Sanding Backing Pad 34mm/1.25" VinylSanding backing pad, adhesive interface. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 3"W x 4"L WT: 0.1 lbs UPC: 8058341044124

Read more less