14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene AcrylateFeatures: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface

Read more less

Soft-Mate Binocular HolderFeatures: For binoculars, magazines, log books and tools Flexible P.V.C. Includes mounting screws Height: 8-1/4" (21cm) Width: 8-3/4" (22.2cm) Diameter: 2-3/4" (6.9cm)

Read more less

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures: 5" x 12" Smoke

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36" Diameter: 1-3/4" Strokes/Gal: 4 Capacity: 13GPM Hose Length: 72" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 780 GPH Gallons Per Minute: 13 GPM Type: Manual Box Dimensions: 2"H x 6"W x 37"L WT: 2 lbs UPC: 021083000145

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24" Diameter: 1-3/4" Strokes/Gal: 6 Capacity: 10GPM Hose Length: 72" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 GPM Type: Manual Box Dimensions: 2"H x 8"W x 30"L WT: 1.6 lbs UPC: 021083000084

Read more less

Sea Kayak Pump w/Float-a-Pump SleeveDesigned specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass. A hose can be added for extended discharge. The installed Float-a-Pump provides positive flotation for pumps dropped overboard.Features: Diameter: 1-3/4" Length: 18" Strokes per Gallon: 8 strokes Gallon per minute: 8 gallons Mounting clips sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 480 GPH Gallons Per Minute: 8 GPM Type: Manual Box Dimensions: 3"H x 4"W x 20"L WT: 0.7 lbs UPC: 021083008776

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36" Diameter: 1-3/4" Strokes/Gal: 4 Capacity: 13GPM Hose Length: 36" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 780 GPH Gallons Per Minute: 13 GPM Type: Manual Box Dimensions: 3"H x 4"W x 38"L WT: 1.4 lbs UPC: 021083000121

Read more less

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.Features Use for diesel, oil, water Length: 11-1/2" (28.4cm) Diameter: 1-1/4" (32mm) Lifts: 4 oz (.12 L) per stroke WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 2"H x 9"W x 14"L WT: 1 lbs UPC: 021083000299

Read more less

Pontoon PumpThe float pump, designed originally for pumping out seaplane pontoons, offers the standard features of a "Thirsty-Mate_" pump with the addition of a flexible foot and tapered collar that fits standard funnels in most pontoons. The foot is threaded to accept 1 1/4" (FH 1-1/4) wire-reinforced hose for those who want to extend the reach of their pump.Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the foot onto the pump body, providing high visibility as well as flotation.

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Beckson Pry-Out Deck PlateBeckson developed the first pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a water tight fit. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present.Dimensions: Outside Diameter: 10" Inside Diameter: 8" Hole Cut: 8 1/2" Color: Beige Center Style: Dimple

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24" Diameter: 1-3/4" Strokes/Gal: 6 Capacity: 10GM Hose Length: 24" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 GPM Type: Manual Box Dimensions: 2"H x 4"W x 27"L WT: 1 lbs UPC: 021083000077

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: White

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the plate. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 10" Hole Cut: 8-3/8" Passage: 8" Center: Clear

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

Thirsty-Mate Hand Pump with 20" HoseThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 18" Diameter: 1-1/4" Strokes/Gal: 10 Capacity: 6GM Hose Length: 20" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 360 GPH Gallons Per Minute: 6 GPM Type: Manual Box Dimensions: 2"H x 3"W x 20"L WT: 0.4 lbs UPC: 021083000046

Read more less

Soft-Mate Equipment HoldersSafety-Soft, Flexible P.V.C. equipment holders designed to hold a variety of gear in convenient sizes for boat, RV, or Home. Designed not to hurt you or your equipment.All Soft-mates come with mounting screws.HH-3 Features: For large winch handles, top action, standard or ratchet Height: 11.0" (28.0cm) Width: 3.50" (8.9cm) Diameter: 2.12" (5.4cm)

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Dimple

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Dimple

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Non-Skid Color: Black

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: Black

Read more less

Soft-Mate Beverage HolderFeatures: Perfect size for beverage cans with insulators Flexible P.V.C. Includes mounting screws Height: 5" (12.7cm) Width: 3" (7.6cm) Diameter: 3-1/2" (8.9cm)

Read more less

Soft-Mate Beverage HolderFeatures: Perfect size for beverage cans with insulators Flexible P.V.C. Includes mounting screws Height: 5" (12.7cm) Width: 3" (7.6cm) Diameter: 3-1/2" (8.9cm)

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Non-Skid Color: White

Read more less

Soft-Mate Equipment HoldersSafety-Soft, Flexible P.V.C. equipment holders designed to hold a variety of gear in convenient sizes for boat, RV, or Home. Designed not to hurt you or your equipment.All Soft-mates come with mounting screws.HH-2 Features: For medium winch handles, top action, standard or ratchet Height: 8.5" (21.6cm) Width: 3.0" (7.6cm) ) Diameter: 2.0" (5.1cm)

Read more less

Soft-Mate Radio HolderBeckson's Soft-Mate Radio Holder holds handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The full size HH-8 is the ideal size for the large hand held radios (CB and 2 meter), GPS units, and scanners.Meaures 6" high, 3" wide, 2" deep. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 021083003351

Read more less

Soft-Mate Radio HolderBeckson's Soft-Mate Radio Holder holds handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The full size HH-8 is the ideal size for the large hand held radios (CB and 2 meter), GPS units, and scanners.Meaures 6" high, 3" wide, 2" deep. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 4"W x 6"L WT: 0.4 lbs UPC: 021083007977

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

Soft-Mate Mini Radio HolderBeckson's Soft-Mate Mini Radio Holder holds smaller handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The Soft-mate mini radio holder is also a good place to store eyeglass cases, pens, pencils, or calculators. The unit is designed for boat and land vehicle and will find many useful places around the home. HH-81 measures 4-3/4" high, 2-3/4" wide, 2" deep Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 021083009889

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Twist-Out Deck PlateThe Beckson Twist-out Deck Plate is designed to conceal its mounting fasteners under the quick twist cover. The low profile cover is self-centering, and quickly locks in place with a 1/8 twist. Three seperate sealing areas, each designed to chase water away from the plate opening, assure a watertight closure. The bayonet threads are non-jamming, self-cleaning and lift at the center for easy removal. O.D.: 7" I.D.: 5" Hole Cut: 5-1/2"

Read more less

Soft-Mate Mini Radio HolderBeckson's Soft-Mate Mini Radio Holder holds smaller handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The Soft-mate mini radio holder is also a good place to store eyeglass cases, pens, pencils, or calculators. The unit is designed for boat and land vehicle and will find many useful places around the home. HH-81 measures 4-3/4" high, 2-3/4" wide, 2" deep Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 021083009896

Read more less

Soft-Mate Can and Air Horn HolderFeatures: Perfect size for beverage cans, hand held air horns Flexible P.V.C. Includes mounting screws Height: 3-2/2" (8.9cm) Width: 4" (10.1cm) Diameter: 2-3/4" (7.0cm)

Read more less

Soft-Mate Can and Air Horn HolderFeatures: Perfect size for beverage cans, hand held air horns Flexible P.V.C. Includes mounting screws Height: 3-2/2" (8.9cm) Width: 4" (10.1cm) Diameter: 2-3/4" (7.0cm)

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: White Color: Beige

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: Black

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: Beige

Read more less

Twist-Out Deck PlateThe Beckson Twist-out Deck Plate is designed to conceal its mounting fasteners under the quick twist cover. The low profile cover is self-centering, and quickly locks in place with a 1/8 twist. Three seperate sealing areas, each designed to chase water away from the plate opening, assure a watertight closure. The bayonet threads are non-jamming, self-cleaning and lift at the center for easy removal. O.D.: 7" I.D.: 5" Hole Cut: 5-1/2"

Read more less

4" x 14" Port GasketFeatures: Gasket for all PO414 Series Ports Gasket only

Read more less

Beckson Screw Type 1" Drain PlugScrew-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.

Read more less