Bennett V351HPU2 24v Hydraulic Power UnitModel: V351HPU2A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. The Lexan cover provides water resistance to the electrohydraulic unit, and the translucent reservoir allows fluid check at a glance.Mounting bracket sold separately (# H1179). HPU measures 4? x 7 1/2? x 5 1/2?. Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.What's in the Box: Pump Solinoid valves Reservoir Cover

Read more less

Bennett V351HPU1D 12v Hydraulic Power Unit with Deutsch ConnectorModel: V351HPU1DA compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. The Lexan cover provides water resistance to the electrohydraulic unit, and the translucent reservoir allows fluid check at a glance.Mounting bracket sold separately (# H1179). HPU measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.What's in the Box: Pump Solinoid valves Reservoir Cover

Read more less

Bennett Hydraulic to BOLT conversion kit Model: HYDBOLTCON UPC: 666285600276 Quick and easy conversion from standard Bennett hydraulic single actuator systems (A1101A & A1101ARC) using your existing wiring, rocker switch and trim planes. No rewiring or drilling of new holes required "Plug’n play" connection to your existing standard Bennett rocker switch Equipped with Auto Tab Retraction (Tabs retract when ignition is turned off), and a sophisticated diagnostics feature, greatly simplifying installation and trouble-shooting Bennett actuators are completely waterproof, submersible and maintenance-free. Backed by Bennett’s lifetime limited warranty. This kit utilizes the existing trim tabel control. You can always opt to use a BOLT style control sold separately. What's in the Box: 12V Actuators with/ 6ft wire harness x 2 Bennett Adjustable Upper Hinges x 2 Relay Module with Built-in ATR Bennett Lower Hinges x 2 Hardware Bag x 1

Read more less

Bennett Lenco to BOLT conversion kit Model: BOLTLKCON UPC: 666285600085 Upgrade to Bennett’s exceptionally durable and dependable electric actuators for years of trouble-free use Easy installation with no new holes to drill ?Plug’n play? connection to your existing standard Lenco controls Works with Lenco ?Standard Mount?, ?Standard Performance?, and ?Edge Mount? systems Bennett actuators are completely waterproof, submersible and maintenance-free. Backed by Bennett’s lifetime limited warranty No relay module required and utilizes the existing Lenco control. Ofcourse you can replace that control with one of the Bennett BOLT series controls. What's in the Box: 12V Actuators with/ 6ft wire harness X 2 Bennett Adjustable Upper Hinges X 2 Lenco Triangular Upper Hinges X 2 Lenco Triangular Lower Hinges X 2 Hardware Bag

Read more less

Bennett JOY1000 JoystickModel: JOY1000 Easily trim your vessel like a boss! Instinctive and intuitive feel and operation Backed by Bennett’s outstanding customer support Connects directly to your actuators with plug-and-play connectors Auto tab retraction (tabs retract up when the ignition is powered off)

Read more less

Bennett BEA3000 Adjustable Upper Hinge Actuator for BoltModel: BEA3000Specifications Vertical transom space required 6.39" Stroke 2.5? Length 13.25? Voltage 12V Connectors Deutsch, DT Series, 13A Actuation force 750 lb. Return Force 750 lb. Current draw: Actuators 20amp Max draw

Read more less

Bennett BEA2000 Fixed Upper Hinge Actuator for BoltModel: BEA2000Specifications Vertical transom space required 13? Stroke 2.5? Length 13.25? Voltage 12V Connectors Deutsch, DT Series, 13A Actuation force 750 lb. Return Force 750 lb. Current draw: Actuators 20amp Max draw

Read more less

Bennett SLT10 10" x 10" Self-Leveling Trim tabs -Model: SLT10 Three mounting options to easily change lift Plane at lower speeds Plane at lower speeds Eliminate porpoising and chine walking Improve your hole shot Reduce engine laboring and improve fuel efficiency Recommended for boats up to 17? - 20' A simple, durable, and affordable trimming solution for smaller boats. Quick and easy installation with nothing to do inside the boat — just mount the actuators and trim tabs on the transom and enjoy the benefits.What's in the Box: 2 x 14 gauge stainless steel tabs with Bennett’s exclusive interlocking hinge 2 x Strong, durable actuators All stainless steel hardware — no plastic!

Read more less

bennett SLT6 6" x 8" Self-Leveling Trim tabs -Model: SLT6 Three mounting options to easily change lift Plane at lower speeds Plane at lower speeds Eliminate porpoising and chine walking Improve your hole shot Reduce engine laboring and improve fuel efficiency Recommended for boats up to 16? A simple, durable, and affordable trimming solution for smaller boats. Quick and easy installation with nothing to do inside the boat — just mount the actuators and trim tabs on the transom and enjoy the benefits.What's in the Box: 2 x 14 gauge stainless steel tabs with Bennett’s exclusive interlocking hinge 2 x Strong, durable actuators All stainless steel hardware — no plastic!

Read more less

This is a standard ES2000 euro switch with 20 foot cabkle for wiring a bridge with controls.

Read more less

Bennett Trim Tab Position Add-on KitModel: ATPSENDSTDThis kit adds tab position indication functionality to classic hydraulic systems currently without indication capabilities. AutoTrim Pro (ATP) requires the presence of actuator sensor wires in order to display trim tab position indication LED’s

Read more less

Bennett actuators are built to last, maintenance-free, and backed by Bennett?s legendary support and lifetime limited warranty. The piston-like arms push tabs into position. All models provide a 2.5? stroke. Replacement actuators do not include hardware. Hardware kit H1170A is recommended when replacing a hydraulic actuator assembly

Read more less

Bennett BRC4000 Rocker Control Rocker Switch for BOLT systems Model: BRC4000 UPC: 666285600238 Use this rocker control with the BOLT electric trim tabs.

Read more less

Euro Style rocker switch for use with all trim tab kits.

Read more less

The Bennett Auto Tab Retractor (ATR) adds even more convenience to easy trim tab operation. Everytime you turn your engine's ignition key to the "off" position, the trim tabs automatically retract to their full-up position. Reduce risk of trim tab damage from fork lifts and trailers, minimize marine growth, and know the position of your trim tabs each time you get underway.

Read more less

Red wired solinoid for Bennett trim tabs

Read more less

Green wired solinoid for Bennett Trim Tabs

Read more less

Bennett 20' Extension for Bolt Actuator Model: BAW2020 Use this to extend the actuator wire harness on a BOLT trim tab system.

Read more less

20 foot of hydraulic hose for trim tabs

Read more less

20 foot wire harness for Bennett trim tab controls.

Read more less

trim tab hydraulic hardware pack.

Read more less

Lower hinge with pin to connect actuator to tab assembly.

Read more less