ANL Fuse Holder with 2 Additional Studs, 750AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 2"H x 7"W x 8"L WT: 0.9 lbs UPC: 843687006794 Brochure (pdf)

Read more less

24-Hour Essential Circuits Module2 x 10AThe 706-2W 24 hour essential circuit module is suitable for essential circuits such as bilge pump auto float switch supplies and stereo memory circuits. The push to reset function ensures essential 24hr circuits cannot be switched off inadvertently. This is contained in the contour lock single module. Designed for smaller systems where only 2 circuit breakers are required Supplied with 2 x 10 amp Carling CLB Series circuit breakers - push to reset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

200A Z Bar 18 Way Bus BarThis patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

85A Remote Switching Continuous Duty SolenoidCan be used with Electro-Scan MSDs and other high-amp circuits with remote operation.Features: Continuous duty, 85A at 12V DC Intermittent rating 750A make/100A break, 10 seconds On, 30 minutes Off Insulated ground Steel housing, brass hardware UL listed and CE certified Same as Cole Hersee part number 24059 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12V Buzzer with Red LED Warning Light - Stainless SteelBuzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch backlighting. The product line includes both switches and warning buzzers with LED light rings.Features: IP50 environmental protection buzzers 80-decibel buzzer sound intensity WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Push-Button Switch 12V Momentary On/Off - Blue LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005933

Read more less

Push-Button Switch 12V Momentary On/Off - Red LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005919

Read more less

Push-Button Switch 12V Latching On/Off - Blue LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005926

Read more less

Dual Distribution Stud Module - 2 x 3/8"The 702-2S was designed specifically for transom areas for connecting battery cables from outboards. It also has many other applications where heavy duty positive and negative connections need to be terminated.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions Standard interchange label system Molded in high temperature, fiber reinforced plastics WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mini Battery Selector SwitchThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover Please note selector switches will not separate electronics from harmful engine starting spikes Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Push Button Switch - 24V Latching On/Off - Blue LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blue Action: On/Off Box Dimensions: 1"H x 1"W x 2"L WT: 0.05 lbs UPC: 843687005513 Brochure (pdf)

Read more less

Push Button Switch - 24V Latching On/Off - Red LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Action: On/Off Box Dimensions: 1"H x 2"W x 2"L WT: 0.5 lbs UPC: 843687005490 Brochure (pdf)

Read more less

2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ONSingle pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. Plasticized body helps seal out moisture and dirt. All knobs are screw-on type.Features: Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads for terminals Fits panels up to 5/8" thick Same as Cole Hersee part number M-606 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Chrome Action: On/Off Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046006

Read more less

Remote Emergency Parallel SwitchThe Remote Emergency Parallel Switch is used for convenient remote activation of the 10 minute emergency parallel function on motorized Voltage Sensitive and Emergency Paralell switches. It can be mounted standalone or within the Contour Connect panel range.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

100A Engine Starting Intermittent Duty SolenoidIntermittent switching of high amperage loads with a low amperage on-off switch.Features: Rated at 750A make/100A break, this solenoid is for intermittent use only: 10 seconds ON, 20 minutes OFF (ideal for engine cranking) Signal voltage of 12V DC and contact voltage of 6-12V DC #10/32 thread signal terminals Copper 5/16”-24 thread contact terminals Bracket mounting holes 5/16” x 19/32”, 2-13/64” on center Same as Cole Hersee part number M-200 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2-Position SPST Heavy-Duty Push Button Switch - OFF/(ON) - 35 AmpSingle pole, single throw switch turns one circuit on and off. Can be used for intermittent windshield wiper or horn control.Features: Replacement cap 1001502 Nominal voltage is 6-36V DC Rated for 35A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-490 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (On)/Off Color: Chrome Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046075

Read more less

200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy acces WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

2-Position SPST Push-Pull Switch - OFF/ON (two-circuit)Single pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type.Features: Nominal voltage is 6-36V DC Rated for 10A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-527 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Chrome Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216045979

Read more less

2-Position SPST PVC Coated Push Button Switch - OFF/(ON)Single pole, single throw switch turns one circuit on and off. Can be used for any single circuit requiring an On-Off style switch. PVC coated to help protect against moisture and dirt.Features: Replacement cap 1001501 Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads Same as Cole Hersee part number M-608 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: (On)/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.4 lbs UPC: 870216046099

Read more less

Mini Contour Battery Disconnect Switch - 275A ContinuousThis switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features: Can be either surface or recess mounted by cutting a 2.1" (52 mm) hole Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH) Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SPST PVC Coated Toggle Switch - OFF/(ON)Single pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control. This toggle switch is PVC coated.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55020-04 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (On)/Off Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046624

Read more less

SPDT Sealed Toggle Switch - ON/ONSingle pole, double throw toggle switch turns one of two circuits on. Common applications include hallway style light switching or switching between natteries, shunts, or current transformers for multiple measurements in a single meter. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 10" 14 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/8" thick Same as Cole Hersee part number 55025-03 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/On Color: Chrome Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046679

Read more less

Fuse Holder ANL 300AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 2"H x 6"W x 7"L WT: 0.4 lbs UPC: 843687006800 Brochure (pdf)

Read more less

Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.

Read more less

SPDT Lighted Toggle Switch - ON/OFF/ONSingle pole, double throw toggle switch turns one of two circuits on. Common applications include combining nav lights and anchor light with indepedent bulbs or maintained dual windshield wiper control.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Five 1/4" blade terminals Switch illuminates red when on and is clear when off 15/32" mounting hole, fits panels up to 1/8" thick Same as Cole Hersee part number M-54111-02 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off/On Color: Clear Throw/Pole: SPDT Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046587

Read more less

Multi-Purpose Alarm - 12VFeatures: A convenient way to add alarm functionality to your dash or panel Buzzer sounds and bright red light illuminates when voltage is present For use with temperature, oil pressure, and engine warning alarm kits Nominal voltage is 12V DC #8-32 screw terminals Red LED WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4-Position Brass Ignition Switch - Accessory/OFF/Ignition & Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-712 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

3-Position Ignition Switch - OFF/Ignition-Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for ignition: 10A at 12V DC and start: 5A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-550 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Panel-Mounted Battery Master SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Removable key Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions Standard interchange label system Molded in high temperature, fiber reinforced plastics WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DPDT Contura Switch - 2-Amber LEDs - Gray - ON/ONDouble pole, double throw switch turns two of four circuits on at the same time. Common applications include hallway style light switching and switching between batteries, shunts, or current transformers for multiple measurments in a single meter. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Includes two Amber LEDs Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Grey Action: On/On Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046518

Read more less

Single 10mm Insulated Stud with Power Tap PlateThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Pro Installer Link Joiner 6-WayThis tin-plated bus bar can be used to link 6 adjacent DC products together.  The rating varies from 350-650 Amps depending on how this busbar is wired, see drawing for details.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 350 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 10.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SPDT Sealed Toggle Switch - ON/OFF/ONSingle pole, double throw toggle switch turns one of two circuits on and off. Common applications include combining nav lights and anchor light with independent bulbs. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55036-14 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off/On Throw/Pole: SPDT Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046709

Read more less

2-Position SPST Sealed Rocker Switch - 12V/24V - ON/OFFSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage is 12V/24V DC Rated for 20A at12V DC, 15A at 24V DC Two 1/4" blade terminals Snap fit into panels .093" - .187" thick IP 66 Same as Cole Hersee part number M-58031-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046259

Read more less

DPDT Contura Switch - 1-Amber LED - ON/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include intermittent and maintained windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC. 1/4" blade terminals Includes one Amber LED Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-25 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: On/Off/(On) Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046464

Read more less

DPDT Contura Switch - (ON)/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include powered hatch control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-27 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: (On)/Off/(On) Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046488

Read more less

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pro Installer Link Joiner 5-WayThis tin-plated bus bar can be used to link 5 adjacent DC products together.  The rating varies from 400-650 Amps depending on how this busbar is wired, see drawing for details.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 400 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 8.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Kill Switch & LanyardAdd safety to older boats easily. In an emergency, a quick pull on the lanyard stops the engine, preventing accidental runaway. Includes switch, lanyard, and disconnect clip. Contact engine manufacturer for specific installation instructions.Features: Nominal voltage is 12V/24V DC Rated for 10A at 12V DC 7" 16 AWG wire leads for terminals IP65 Same as Cole Hersee part number M-597 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Contour 1100 Series Double Interior Switch - On/Off - BlackThe Contour Interior Switch can be either surface or recess mounted. The interior series is supplied standard with a three terminal on/on switch which can be used for on/off circuits or two-way light installations. For applications such as shower drain pumps or electric toilets, momentary switches can be interchanged into the switch plate. Switches can be turned 90 degrees for horizontal mounting, and are current rated at 10A DC. All switches include a label sheet.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Action: On/Off Box Dimensions: 2"H x 2"W x 6"L WT: 0.1 lbs UPC: 870216005706

Read more less

701 Contour Battery Master SwitchLabel Set (12 Labels) for non-standard labeling.

Read more less