Yamaha Jet Boat Custom 24' - 800 Pound Ballast Bag - GreyAdd 800lbs to the rear of your Yamaha with the FatSac Yamaha Jet Boats Custom 24 for 24' Yamaha boat models.The FatSac High Yamaha Jet Boats Custom 24 FatSac is designed to be tied down to the swim platform step of your 24' Yamaha, adding 800lbs to the rear of your boat so you can get wakesurfing.Fits 2017 and newer 24' Yamaha BoatsFeatures: Adds 800 lbs of Ballast Includes plug and W730 fitting for use with the FATSAC Supa Tsunami Pump Includes 4 built-in handles so you can secure this to the platform (tie-downs not included) In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP),Diisononyl Phthalate (DINP) which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 8"H x 14"W x 17"L WT: 9.35 lbs UPC: 817177023172 Brochure (pdf)

Read more less

V-drive Fat Sacs - Pair - 400lbs Each - GraySold as a set of two 400 lb ballast bags, the FatSac Series V-Drive Sacs Set works well in the rear lockers of v-drive boats or split up with one bag in the bow of the boat and one in the rear area.The FatSac Series V-Drive Sacs are sold as a set and are designed to fit in the compartments on either side of the engine in v-drive boats.  The V-drive ballast bags are perfect for building massive wakeboarding and wakesurfing wakes.  A pair of V-drive sacs also works great on either side of the engine in a direct drive boat for a great wakeboard wake, or put one on the side of the engine, and one between the engine and rear seat for a perfectly surfable wave.Features: Highest Quality HeyTex layered materials. UV resistant Double welded seams with seam tape for highest quality and strength. Each sac comes with the fittings needed to use the over the side supa pump Just switch out the fittings to plumb the bags into an automatic fill/empty system Offered in Black or Gray (other colors available for additional cost) Sacs can be personalized with custom printing (for an additional cost) Sit, Stand and walk across full sacs with no issue. Size: 400 lbs. eaach (800 lbs. total) = 42" x 16" x 16" In the Box: Ballast Bag x 2 Eight Valves/Caps (W731 x 4, W749 x 2 and W730 x 2) *Sold as a PairWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 10.9 lbs UPC: 817177020225 Brochure (pdf)

Read more less

Brick Fat Sac Ballast Bag - 155lbs - GrayThe compact size of the FatSac Fat Brick makes it small enough to stash anywhere, but it offers enough capacity to balance the weight distribution within any type of boat.If you constantly struggle to keep the weight in your boat balanced, the FatSac Fat Brick is for you. Have a lot of batteries or a big stereo that makes the boat always lean to one side? This 155lb. ballast bag is compact and makes it easy to adjust the weight in the boat from side to side so that you always have a clean wake with no wash.Offset the driver's weight when Slalom Skiing with this 155 lbs. square ballast bag.Features: Highest Quality HeyTex layered materials. UV resistant Double welded seams with seam tape for highest quality and strength. Each sac comes with the fittings needed to use the over the side supa pump Just switch out the fittings to plumb the bags into an automatic fill/empty system Offered in Black or Gray (other colors available for additional cost) Sacs can be personalized with custom printing (for an additional cost) Sit, Stand and walk across full sacs with no issue. Size: 155 lbs. = 16" x 16" x 16" In the Box: Ballast Bag Two Valves/Caps (W749 x 1 and W730 x 1) *Sold as an IndividualWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 4.3 lbs UPC: 817177020287 Brochure (pdf)

Read more less

MareLube TEF45 Max PTFE Heavy Load Lubricant - 4 oz.Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water. Marelube TEF 45 is a highly water-resistant synthetic lubricanat grease containing 45% PTFE. This is the highest percentage PTFE available, which makes TEF 45 perfect for heavy loads and bi-metal anti-corrosion applications like turnbuckles, spar fittings and motor lower units. TEF 45 also works well at protecting against rust corrosion and anti-seize applications. Features: Max PTFE Heavy Load Formulation Highly Water Resistant Bi-metal Corrosion Protection Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 3"L WT: 0.35 lbs UPC: 028026190932

Read more less

Boat Cover Reinforcement/Repair KitKit includes one square yard of self adhesive material. Use it to add extra padding to stress points from windshields, trolling motors, etc. or to patch wear areas and tears that may develop over time. Simply cut to desired size and apply to clean, dry surface. Specifications: Type: Parts Box Dimensions: 2"H x 8"W x 11"L WT: 0.8 lbs UPC: 813095022570

Read more less

12" x 18" Sailfish FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.4 lbs UPC: 040011932884

Read more less

Fixed Filet Knife Set - 4 Knives - 5”, 6”, 7” & 8” Fixed KnivesThe Toadfish Fixed Fillet Knife Set brings together all four of our high-performance blades—5”, 6”, 7”, and 8”—in one premium collection. Each knife is crafted with a corrosion-resistant coated blade and an ergonomic, non-slip handle designed for all-day comfort and control. Whether you're breaking down small inshore species or tackling big offshore fillets, this set gives you the ideal tool for every job.Housed in a durable, water-resistant zip-up carrying case, this collection is built for life on the water. The custom-molded interior keeps each knife secure and protected, while the compact design makes it easy to take from boat to cleaning station and beyond.Whether users are on the dock, in the kitchen, or out in the wild, the Toadfish Fixed Fillet Knife Set should be the go-to for clean cuts, easy handling, and dependable performance.Toadfish Model Number: TFFILETSET (GIFT SET)Features: Non-slip ergonomic handle 8CR14 High Carbon Stainless Steel with Titanium Coating Non-Slip Raised Rib Rubber Grip Tapered standard flex designs Custom zip-up carrying case – Durable, organized, and ready to travel Products Included: 5” Flex Fillet Knife – For precise cuts and delicate work 6” Fillet Knife – All-around utility for most species 7” Fillet Knife – Ideal for medium to large fish 8” Breaking Knife – Heavy-duty power for big cuts Custom zip-up carrying case – Durable, organized, and ready to travel

Read more less

Stainless Steel Cup InsertFeatures: Material: Stainless Steel Cup Insert Mates with PCHE

Read more less

Letter & Number Kit - BlackFeatures: 3-inch, waterproof vinyl, pressure-sensitive labels Resists fuel, fading, and scratches Kit contains (Black Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces *Meets USCG guidelines Quick Guide (pdf)

Read more less

3/4" Quick Release Connect with Suction Stopping TechnologyFeatures: Unique version of the standard male Quick Connect fitting with their "suction stopping" technology.  Sac Valve Threads w/O-Rings For Auto Ballast Systems *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.1 lbs UPC: 817177023134 Brochure (pdf)

Read more less

Supa Pump 3.0 with Inline SwitchSuper Fast! Super lightweight, easy to use over the boat pump! Now with an in-line on-off switch! Bigger hose for faster fills! Compatible with all FatSac bags!The Supa also comes with a helically reinforced hose that prevents kinks. The hose has also been extended to 12 1/2’ to accommodate larger boats and deeper hulls. We have also lengthened the power cord to 15’ as boats continue to get longer. The plug has been upgraded to stainless steel to prevent the rust and corrosion we saw on previous models. It has custom-machined FatSac brand fittings, making it directly compatible with the cap and chain fitting on your FatSacs.Specifications: Lightest and fastest pump available from start to finish Even faster than our Supa Tsunami Fill bags in minutes Bigger hose for fast fills! 12.5’ long hose to accommodate deeper hulls and longer boats 15’ long power cord perfect for longer boats Stainless steel outlet adapter to prevent rust/corrosion Now with an in-line on-off switch Custom machined fittings to increase flow - compatible with the W730 fitting provided in all stock bags or available for purchase under 'FITTINGS' The pump is compatible with older FatSac bags

Read more less

Wally Plug with O-RingsFatSac Replacement Ballast Bag Plug is used to plug unused holes on FatSac ballast bags. Fits the proprietary thread pattern used on FatSac bags making a perfect water-tight seal that won't leak or back out over time.Off-the-shelf FatSac ballast bags include the required number of bag plug fittings, but if you're misplaced one or want to have extras, this is the fitting you need to close any unused holes on the bag.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac a quick and simple task. Features: Wally plug O-ring *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 817177021376 Brochure (pdf)

Read more less

Emergency Radar ReflectorEvery small boat needs a radar reflector. The Davis Emergency Radar Reflector is a compact, lightweight and economical unit that disassembles and stows flat for storage. When needed, it pops open to 11.5" diameter (29 cm) and installs in seconds. Its three perpendicular planes reflect radar from all directions.Made of special plastic-metal foil laminate. Resists corrosion and peeling. Owner's Manual (pdf)

Read more less

12" x 18" White Marlin FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011933089

Read more less

Little Hawk Mk 2 Wind IndicatorThe Little Hawk Mk 2 brings all of the benefits of the Little Hawk Mk 1 Wind Indicator and mounts it in a secure manor at gooseneck height in front of the mast. Designed for smaller single handed Dinghies, the Little Hawk Mk 2 allows quick and accurate reference to wind direction without having to look at the top of the mast. Ideal for upwind and downwind reference. The Little Hawk Mk 2 is easily mounted and removed with a secure adjustable bracket. The aluminum support rod can be bent to any required angle, but is easily straightened if accidentally knocked. The complete unit removes for safe storage without any tools. The Little Hawk Mk 2 is very popular with Laser sailors. Specifications: Vane Arm length 16.5cm (6.5") Overall height 19cm (7.5") Weight 28 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 1"H x 4"W x 14"L WT: 0.1 lbs UPC: 652773100502

Read more less

MConnect® Vessel Monitoring & Control Web ServerMConnect is a cutting-edge, NMEA 2000® certified web server and screen editor designed to enhance the boating experience by centralizing control, monitoring, and automation functions. It connects to over 400 NMEA 2000® data points on a vessel, providing real-time visual feedback through customizable, modern graphics on multi-function displays or any browser-enabled device.Engineered to cater to vessels of all sizes, this powerhouse delivers real-time data displayed on sleek web pages accessible from your favorite devices—phones, tablets, PCs, or MACs, take your pick! MConnect, inspired by the design brilliance of Maretron’s award-winning N2KView® Vessel Monitoring and Control Software, boasts intuitive graphic controls that transform complex data into a visually stunning experience.MConnect integrates with marine Multifunction Displays (MFDs) like Garmin OneHelm™, Raymarine LH, and many more. It also fully integrates with digital switching systems such as Octoplex® and MPower® for a truly interconnected marine ecosystem.MConnect doesn’t stop at one NMEA 2000 bus—it connects directly to two, independently receiving data from both. Monitor Primary and Secondary buses, or keep an eye on Navigation and Monitoring buses separately—no bridge is required.Spot potential issues at a glanceSay goodbye to deciphering data jargon! MConnect uses vibrant colors and high-definition graphics to give you an instant visual checkup of your boat's health. Spot potential issues at a glance as the information effortlessly synchronizes across various screens. Fast, seamless, and beginner-friendly, MConnect boasts an uncluttered interface that you can customize to fit your needs.Revolutionizing vessel monitoring for OEMsMConnect isn't just a powerful tool for vessel monitoring; it's a game-changer for Original Equipment Manufacturers (OEMs). We understand the importance of brand identity, and with MConnect, OEMs can take control like never before. Seamlessly integrate your brand aesthetics into the MConnect interface by creating custom graphics that align with your unique identity. This unprecedented feature empowers OEMs to showcase their brand seamlessly within the monitoring experience. The result? A truly cohesive and branded vessel monitoring solution that not only delivers unparalleled functionality but also elevates your brand presence on board. MConnect opens up a realm of possibilities for OEMs, ensuring their vessels stand out with a distinctive visual identity, making waves in both performance and style.Your boat's well-being has never been so accessibleMConnect opens the doors wider with its simultaneous multi-user capability and an attractive price point.Features:Advanced CustomizationThe built-in MConnect Editor provides an unparalleled level of customization, allowing users to design screen layouts from scratch or choose from 87 pre-built options. OEMs can tailor the interface to match their brand identity, creating a cohesive branded user experience. This flexibility enables a truly personalized user interface, catering to both novice and expert users.Dual NMEA 2000® Bus ConnectivityMConnect can independently connect to and receive data from two optically isolated NMEA 2000® networks, offering enhanced reliability and redundancy that ensures continuous system monitoring.Full Integration with Digital Switching SystemsMConnect uses standard NMEA 2000® switching PGNs, allowing seamless integration with third-party systems as well as our own Octoplex® and MPower® systems. This consolidation of control and monitoring simplifies complex integrations into one platform.Web-Based AccessibilityUnlike traditional systems, MConnect’s web server allows remote access from any device with a browser and uses VPN support for enhanced data security. This ensures both versatility and security for onboard and offboard management.Affordable PricingMConnect provides high-end features at a competitive price, delivering exceptional value without compromising on quality or performance.Specifications: Engaging HTML5 user interface experience Design your look with custom graphics Can support simultaneous access by up to four users Dual Can Bus for dual or redundant NMEA 2000 Connections 9-32 Volt Power Input (with reverse polarity protection) Only 5-watt power usage RJ45 Ethernet Port USB 3.0 Port WIFI This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

12" x 18" Wahoo FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011934185

Read more less

10' White Stern Flex Hose with Transom FlangeThis Trident Stern Flex Hose is white (Trident Marine 129W series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142W-2000.Features: Highly resistant to crushing, abrasion, and UV and has good resistance to chemicals  Extraordinary flexibility Construction: Hose: Lightweight polyethylene copolymer Reinforcement: Integral Polyethylene Helix Temperature Range: -40°F to 140°F (-40ºC to 60ºC) Specifications: Color: White Inner Diameter: (inch) 2” / (mm) 50.8 Outer Diameter: (inch) 2.35” / (mm) 60 Bend Radius: (inch) 3.5” / (mm) 88.9 Weight: (lb/100 ft.) 26 / (kg/m) 11.8 Quick Guide (pdf)

Read more less

ATMOS 12V Integrated Air StationRevolutionize your boating experience. Scanstrut's built-in air station is here to maximize quality time on the water. ATMOS, by Scanstrut, will revolutionize your family’s boating experience. This beautifully designed, built-in air station is here to maximize quality time on the water. At the push of a button, ATMOS is ready to inflate your paddleboards, towables, and more: simply set the target pressure and let ATMOS do all the hard work. Utilizing Scanstrut’s outdoor technology DNA, this is waterproof on-board air that’s engineered to thrive in the harsh marine environment.Innovative Two-Stage PumpATMOS with Brushless Technology - Unleash the power, efficiency, and reliability of our innovative two-stage pump system designed to meet the rugged demands of the marine environment. The first stage features a highly efficient fan motor, followed by a robust piston pump, both designed specifically for the rugged demands of the marine environment. ATMOS combines both pumps into one waterproof, easy-to-use onboard air station, automatically switching at 1.1PSI from the HVLP to the HPLV pump.Stage 1: High-volume, low-pressure (HVLP)Designed to move large volumes of air with minimal pressure. They are typically used for inflating larger inflatable objects like kayaks, large tubes, and bathing platforms, as they can quickly inflate the object to the desired pressure.Stage 2: High-pressure, low-volume (HPLV)Designed to generate a high level of pressure with a low volume of air. Perfect for inflating smaller toys like SUPs, inflatable kayaks, and tubes that require a higher level of pressure for optimum performance. Installation: How: Panel mounted using self-tapping screws or bolts (not included), foam gasket included. Installation angle: + 10º to - 30º from vertical Service: No end-user serviceable parts Where: Fits into a wide variety of locations on board: seating, side panels, or consoles. Minimum cavity depth 110mm (4.33”) Ignition Protection - ISO 8846 and SAE J1171 ATMOS SC-AOB-A2 has successfully undergone all required tests and complies with the rigorous standard for Ignition Protection. This certification signifies that ATMOS can be safely installed in any location on a boat or vehicle. The Design:The FrontTake control with our Soft Touch TPE buttons and cutting-edge LCD. Specially crafted for the challenging marine environment, the buttons feature a non-slip texture that provides a tactile surface, even with wet hands, and the bright, wide viewing angle display means you can have a great view from any place on the boat, even on the brightest days. The display also features a helpful Live Voltage readout, so you can easily keep track of your boat's battery health.The BackEasily integrate ATMOS into your boat with its compact and shallow design. The versatile AirStation can be installed in a variety of locations, including seating, consoles, or by the swim platform, making it convenient and accessible wherever it's needed. Easily installed into any panel using 10 self-tapping screws, with a foam gasket included to ensure a secure and waterproof fit. The SideThe minimum cavity depth required is 110mm/4.33", and it can be installed at an angle ranging from +10º to -30º from vertical. The power cable length is 500mm (20”) with a wire gauge of 2.0mm2 (14 AWG). Please note that there are no end-user serviceable parts.Environment: Environmental protection: Conformal-coated electronics and PCB Brushless Technology: Featuring high-performance brushless motors designed for the marine environment.  Protection: Reverse polarity, short-circuit, under voltage, overload, over temp. Certifications: CE, ROHS, UN ECE R10, UKCA Cable length: 500mm (20”) 1.5 mm2 16 AWG Waterproof rating: IPX6 front and rear (door closed) Airflow: In and out of the front of the unit only. The rear of the unit is sealed Safety: Max run time: 25 minutes (3 SUPs) Under protection: Soft motor start Standby mode: No activity auto shut off - 5 mins Max pressure output: 20 PSI / 1.4 BAR Warranty: 2-Year warranty Auto shut-off: At target pressure Ambient operating temp: -20º to +50 ºC Ignition Protection: ATMOS SC-AOB-A2 meets the ISO 8846 and SAE J1171 test standards for Ignition Protection. Technical Specifications: Waterproof rating: IPX6 waterproof front and back Max volume of airflow 0-1 PSI: 350 LPM/12.3 CFM Max volume of airflow 1-20 PSI: 70 LPM/2.5 CFM Standby power draw: 0.01W Max Ambient operating temp: -20º to +50 ºC Input voltage: 12V Battery system (10-14V) Max Pressure output: 20 PSI / 1.37 BAR Max current draw: 12A (140W) Standby current draw: 0.02W Max Two-stage pump: Stage 1 = 0 -1 PSI, Stage 2 = 1.1 - 20 PSI What's In The Box? Sun Cover: Supplied with a heavy-duty sun cover, it can help protect it from the long-term damaging effects of the sun, salt, and other elements. With our sun cover, you'll be able to keep ATMOS looking its best for longer. 2.5M (8ft) hose: When inflating a paddleboard on a boat, the most stable location for the pump is usually on the deck or another flat surface. However, this location may not be close enough to the paddleboard to allow for easy inflation if the hose is too short. A longer hose can help to bridge this distance, allowing you to move the pump away. 6x Hose attachments: Supplied with 6 different adapters including; Boston Valve, C7 Valve, H3/HR Valve, Pinch Valves, and 805 Valve. You have everything you need to inflate and deflate your toys with ease, no matter what type of valve it has. Quick Guide (pdf)Brochure (pdf)

Read more less

Slide Mount Kit f/CFX3 & CFX5 35/45 CoolersWander without worry.  The Dometic CFX SLD35/45 is designed to allow easy access to your CFX-powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the CFX fridge slides must-haves for the serious outdoor adventurer.Legacy Part Number - CFX3SLD35/45Features: The maximum load capacity of 220 lbs or 100 kg Can be fully extended for easy access to fridge contents A rugged latching system reduces rattling noise while driving Dust cover keeps sand and dirt out of slide rails The optimized design avoids adding unnecessary weight to the vehicle Compatibility: CFX3 35/45 Powered Coolers CFF 35/45 Powered Coolers CFX5 35/45 Powered Coolers In the Box: One (1) Slide Four (4) Straps Install hardware Manual *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 6"H x 27"W x 36"L WT: 30.7 lbs UPC: 713814329662 Owner's Manual (pdf)

Read more less

Protective Cover for CFX3 & CFX5 35 Electric CoolersFrom tailgates to tree lines, this cover is built for adventure. The CFX5 PC35 wraps your cooler in tough EVA foam and weather-ready nylon, protecting it through every mile. Thoughtful details like vent clearance, zippered storage, and easy access to controls mean you get smart protection—without slowing down. Also compatible with CFX3 35.Features: Custom-fit to CFX5 35 (also fits CFX3 35) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

Slide Mount Kit for CFX3 & CFX5 75 DZWander without worry.  The Dometic CFX SLD75 is designed to allow easy access to your CFX powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the CFX fridge slides must-haves for the serious outdoor adventurer.Legacy Part Number - CFX3SLD75Features: The maximum load capacity of 220 lbs or 100 kg Can be fully extended for easy access to fridge contents A rugged latching system reduces rattling noise while driving Dust cover keeps sand and dirt out of slide rails The optimized design avoids adding unnecessary weight to the vehicle In the Box: One (1) Slide Four (4) Straps Install hardware Manual *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 6"H x 30"W x 45"L WT: 55 lbs UPC: 713814329686 Owner's Manual (pdf)

Read more less

Stowaway Dry Box with Smart Grip & Cell Phone Tray InsertThe Toadfish Dry Box is the ultimate protection for your gear. Crushproof, dustproof, and adventure-proof, the boat storage box offers strategic organization features and trusted Toadfish protection. With every product sold, Toadfish is replenishing the population of inshore species like redfish, trout, cobia, tarpon, & flounder. Let’s Put ‘Em Back®!Toadfish Model Number: TFDRYBOX-GRAYFeatures: IPX7 Sealed System - waterproof up to 1 meter for 30 minutes Impact Proof ABS - the outer shell construction EVA Lure Pads - high density Smart Grip Non-Tipping Suction Base Soft Touch rubber interior Removable cell phone tray Specifications: Dimensions (inch): 10.75'' x 5.75'' x 3.5'' Weight (pounds): 1.79 lb. Storage SolutionThe Stowaway Dry Box provides an innovative storage solution designed for any outdoor adventure.  For the boat, the hunt, the campsite, the beach, the canoe trip, the kayak, the shore lunch box, the emergency kit, or whatever adventure you have planned, it's built to keep you organized, and your gear dry.Lightweight & DurableThe Stowaway Dry Box features unmatched durability and can withstand serious impact. Featuring the Smart-Grip suction technology, you'll never have to worry about losing it.

Read more less

Life Ring/Ring Buoy Letter KitNow you can customize your life ring with our Taylor Made Lettering kit. Package includes 2" black letters and numbers (4 ea.) plus symbols. Constructed from waterproff marine grade 4 mil. vinyl, resistant to fuel, chemicals fading and scratching. Application template included.

Read more less

Cooler Cart KitCamco’s Cooler Cart allows you to roll your cooler, rather than carrying it. The cart fits different-sized hard coolers with 15.5" to 17.5" widths.  Its large, 12" wheels provide easy toting over different terrain and the cart comes equipped with a powder-coated steel frame on zinc-plated steel axles and polyester straps. Features: Allows you to wheel your cooler It fits most coolers with widths up to 17.5" 12" wheels provide easy toting over different terrain Technical Specifications: Material: Powder-coated steel frame with zinc-plated steel axles  Weight Capacity: 200lbs *Sold as an Individual Specifications: Color: Black Type: Service Kits Box Dimensions: 8"H x 14"W x 14"L WT: 10.7 lbs UPC: 014717517980

Read more less

 Power Pole Cover f/Pro Series & Sportsman 8' Models OnlyPower Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.

Read more less

Protective Cover for CFX3 & CFX5 95DZ Electric CoolersThe biggest cooler deserves our toughest cover. The PC95 combines rugged materials, smart design, and easy access in one essential layer of defense. Whether you’re on the road, off the map, or just chasing the next big view—this cover keeps your cooler (and your trip) running smoothly.Features: Custom-fit to CFX5 95DZ (also fits CFX3 95DZ) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

Boat Cover Snap PatchUse this adhesive snap patch on the underside of a boat cover to reinforce and provide a location to attach a snap-in style support pole. Specifications: Type: Parts Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs UPC: 081231296301

Read more less

Little Hawk Race Wind Indicator for Boats up to 8MThe Little Hawk Race takes the ever popular Mk 1 Wind Indicator, cuts it to a minimal length and provides with a robust and lightweight mounting system. This gives the customer the lightest, least drag Wind Indicator on the market today. With its UV protection there will be no degradation in performance for many years. Ideal for all racing boats up to 8m. The mast clamp is screwed into the mast with two self-tapping screws (included). The Little Hawk Race is then pushed into place or removed easily. Specifications: Vane Arm length 16.5cm (6.5") Height 14cm (5.5") Weight 14 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 1"H x 4"W x 12"L WT: 0.1 lbs UPC: 652773100410

Read more less

12" x 18" Jolly Roger Novelty FlagNovelty Design FlagsAll novelty flags measure 12" x 18" with 2-sided screen printed graphics and brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011931887

Read more less

2.75" x 40 Yards - 400 Grit Ceramic Sandpaper - 1 RollSEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Ceramic grain Easy to tear to size C-weight paper Quick Guide (pdf)Brochure (pdf)

Read more less

Stainless Steel Replacement Flag Pole - 30" The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes.  Maximum speed 10 MPH.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 30"L WT: 0.45 lbs UPC: 035514328517

Read more less

Nylon Windshield Brace Foot Kit with TubeWindshield Brace Kit includes two windshield brace feet and a 14-1/4" length of formed aluminum tube to be cut to size per individual application. Injection molded nylon brace feet inserts must be crimped in place. Installs with #10 PH screws (not included). Direct replacement for Taylor Made TMS-041. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Flagpole Pennant Mounts & Stainless Clips - PairThe Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes. For use on either 7/8" or 1" tubing. Maximum speed 10 MPH. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 2"W x 6"L WT: 0.05 lbs UPC: 035514328852

Read more less

Weather SealLength: 10'Height: 1/4"Width: 3/8"Color: BlackTACO Metals supplies quality weather seal that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for live-wells, exterior doors, instrument covers and electronic boxes. TACO weather seal products are made of specially formulated rubber compounds, designed and engineered to provide maximum sealing capacity and protect against weathering and vibration. Absorbs shock and reduces vibration Offers superior resistance to water absorption, sunlight and extreme temperatures Durable EDPM synthetic rubber compound Ideal for live-wells, exterior doors, instrument covers and electronic boxes Adhesive backing for convenient installation This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Slide Mount Kit for CFX3 & CFX5 55 IM CoolersWander without worry.  The Dometic CFX SLD55 is designed to allow easy access to your CFX-powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the CFX fridge slides must-haves for the serious outdoor adventurer.Legacy Part Number - CFX3SLD55Features: The maximum load capacity of 220 lbs or 100 kg Can be fully extended for easy access to fridge contents A rugged latching system reduces rattling noise while driving Dust cover keeps sand and dirt out of slide rails The optimized design avoids adding unnecessary weight to the vehicle In the Box: One (1) Slide Four (4) Straps Install hardware Manual *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 6"H x 26"W x 37"L WT: 34.25 lbs UPC: 713814329679 Owner's Manual (pdf)

Read more less

Slide Mount Kit f/CFX3 & CFX5 95DZ/100 CoolersWander without worry.  The Dometic CFX models SLD95/100 is designed to allow easy access to your CFX-powered cooler from the back of your truck, SUV, trailer, or RV. A strong construction, large maximum load capacity, and rugged latching system make the CFX fridge slides must-haves for the serious outdoor adventurer.Legacy Part Number - CFX3SLD95/100Features: The maximum load capacity of 250 lbs or 115 kg Can be fully extended for easy access to fridge contents A rugged latching system reduces rattling noise while driving Dust cover keeps sand and dirt out of slide rails The optimized design avoids adding unnecessary weight to the vehicle Compatibility: CFX3 95 DZ Powered Cooler CFX5 95 DZ Powered Cooler CFX3 100 Powered cooler In the Box: One (1) Slide Four (4) Straps Install hardware Manual *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 6"H x 30"W x 44"L WT: 56 lbs UPC: 713814329693 Owner's Manual (pdf)

Read more less

Coastal Kitchen Collection - Oyster Knife, Shrimp Cleaner & Crab CutterThe Toadfish Coastal Kitchen Collection combines the most innovative seafood tools on the market into one set. The patented designs make preparing coastal food easier, safer, and more enjoyable. Toadfish created the Coastal Kitchen line to enhance the coastal lifestyle and provide a connection point between what we eat and the sustainability of those resources. Toadfish Model Number: TFCKCSET-TEALProduct Included:Put 'Em Back Oyster KnifeA fresh look at ergonomics with a bent tip design and handles made from recycled plastic bottles. Opens oysters with ease. U.S. Patent No. D852005Frogmore Shrimp CleanerFirst of it's a kind tool that peels, deveins, and butterflies shrimp in one smooth motion. A perfect shrimp every time. U.S. Patent No. D846362Toadfish Crab CutterFlawlessly cuts crab shells instead of smashing them. Creates less mess and stunning presentations. Patent Pending

Read more less

Gator Patch 9" x 12" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Visibility Kit II with Miniport TracMountCheck out the RAILBLAZA Visibility Kit II –  for safe and awesome kayaking experiences! Whether you’re out exploring on a sunny day or cooling off under the stars, this kit has you covered. This value-packed offer includes everything you need to be seen and stay safe from dawn until dusk, so you can have as much fun as possible. The StarPort HD keeps everything secure, and the 3-Foot ExtendaPole lets you proudly display the RAILBLAZA safety flag. Plus, when the sun goes down, clip in the Illuminate i360 for an all-round white navigation stern light that meets marine use standards! Get yourself a Visibility Kit II and make sure everyone can spot you from miles away. Kayaking isn’t just about having a good time – it’s also about being safe and responsible!Make sure others can see you out on the water! Get visible with the RAILBLAZA Visibility Kit II which is packed with essentials like the i360 light and Miniport TracMount - this kit has it all for max visibility day or night, plus IMANA-approved for marine use. Ready to get out there?Features: 3 operating modes for the i360 light (high, medium, and blink) Easily breaks down for storage Mounts onto any track with a turn of the MiniPort  Specifications: Weight: 1.04 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x i360 Light 1 x Extenda Pole kit 1 x MiniPort TracLoader 1 x Kayak Safety Flag

Read more less

Quick Reference Weather Forecasting CardShows the use of wind direction, barometric pressure, and cloud type in predicting the weather, plus a full list of radio weather stations for official broadcasts, key information on storm warnings, hurricane avoidance, navigating in fog and other hazardous conditions, and more. Weatherproof high-strength plastic, full color on both sides. Punched for binder or bulkhead mounting. Dimensions: 8.5″ x 11″ (216 x 279 mm).

Read more less

GatorSkinz™ Non-Skid Step Pad - Grey Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Specifications: Type: Misc Box Dimensions: 1"H x 5"W x 20"L WT: 0.6 lbs UPC: 604014009051

Read more less

GatorSkinz™ Non-Skid Step Pad - Black Pebble - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 1"H x 5"W x 20"L WT: 0.7 lbs UPC: 604014009037

Read more less

GatorSkinz™ Non-Skid Step Pad - Black Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Specifications: Type: Misc Box Dimensions: 1"H x 5"W x 20"L WT: 0.65 lbs UPC: 604014009044

Read more less

GatorSkinz™ Non-Skid Step Pad - Black Grit - 12" x 24"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Specifications: Type: Misc Box Dimensions: 5"H x 5"W x 12"L WT: 0.95 lbs UPC: 604014009136

Read more less

Plugmate™ Garboard Wrench The Garboard wrench features multiple deck keys. Constructed of durable injection molded polypropylene it fits standard garboard plugs as well as "T" style plugs. The 520045-1 includes one replacement plug stored in handle.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12" x 18" Swordfish FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011934482

Read more less

12" x 18" Blue Marlin FlagFisherman's Catch FlagsAll Flags Measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011932983

Read more less