Neutral Button Kit for SICO & SISCOFeatures: Neutral Button Kit Specifically for VETUS SICO and SISCO

Read more less

Bow Thruster Extension Cable - 33'Connection cable 33' for use with Vetus thruster control panels. Quick Guide (pdf)

Read more less

Legacy Thruster Converter (Molex)Lewmar’s new range of thruster controllers provides superior tactile control of single or dual thruster installations. Converts Gen 2 Thruster Controllers to Gen 1 Thruster Wiring.  The controllers can be fitted to all Lewmar TT thrusters (Blue box) and to the previous generation TT thrusters fitted with a Black box, using this controller converter. Only one legacy converter is required per thruster.Features: Upgrade kit allows replacement of the previous generation controller with the new Black box thrusters  Easy-fitting - Existing boat wiring can be used  Needs to be installed next to the controller  *Sold as an Individual

Read more less

Generation 2 Single Joystick Thruster ControllerLewmar’s range of thruster controls provides superior tactile control of single or dual thruster installations. The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws.  A cover is also included, providing additional security against accidental use and giving extra environmental protection.  If replacing a previous generation touch panel, joystick panel, or dual joystick panel, the existing mounting hole and fixing screw positions can be reused. Compatible with:Lewmar TT, RT, SRT & VRT thrusters are fitted with a blue box and can be fitted to thrusters fitted with a black box using a controller adapter.*Requires Lewmar connecting cable.Features: The ergonomic control ‘pad’ gives tactile feedback  Membrane switch panel sealed from dust and moisture ingress  Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions.  Fit existing cut-out of Lewmar joysticks  Removable cover  Technical Specifications: Power - 12/24 Volt DC Cut-out - 2.5" Diameter *Sold as an Individual Owner's Manual (pdf)

Read more less

Thruster Joystick Panel ControllerControl your Lewmar bow thruster using the joystick panel.Compatible with: Lewmar 110TT Lewmar 140TT Features: Plug 'n' Play connection from joystick to Thruster means dual station control is possible On/Off illumination Easy installation connection *Sold as an Individual

Read more less

140TT 2.2kw Gen. 2 Bow Thruster - 12VManeuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple.The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability.All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time.Features: No reservoir to install, no leaks, and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin or anode required Blue box electronics prevent misuse and protect motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self-resetting thermal protection  Easy plug together switch connections Minimum silhouette hub for smooth water flow Technical Specifications: Voltage - 12V Power - 2.2 KW Power - 3 HP Tunnel Size - 5.5" Thrust - 92lb Weight - 29lb *Sold as an Individual Owner's Manual (pdf)

Read more less

Anode Kit for 140 TTSpare anodes used in conjunction with Lewmar thruster fitted with a bronze hub.In the Box: Anode Mounting hardware *Sold as an Individual

Read more less

Rubber Bellows for Joysticks Replacement rubber bellows for Vetus joysticks.Compatible With: BPAJ joystick BPJ5D joystick BPJDE2 joystick BPJDSE joystick BPJE2 joystick BPJR joystick BPJSE joystick BPJSTA joystick BPJSTH5 joystick EHPJSTA joystick *Sold as an Individual

Read more less

Bow Thruster Panel w/Buttons & Time LapseSingle touch panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features: Protected against accidental or unauthorized operation Panel power on indicator Control circuit overload protection Built-in time lapse device when reversing the direction of rotation Automatic switch off after 30 minutes inactivity. This feature is user selectable during installation In the event of continuous running for more than 2 minutes there is a warning LED and buzzer and the thruster will switch off automatically. The panel will reset itself after 5 seconds. Watertight to IP 66 Dimensions: 85mm x 85mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Bow Thruster BTQ 140-40 40KGF - 12V - D140 - 2.2kWBetter Performances, Lower AbsorptionThe 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.Features: The Gearbox is created so that the behavior of the propeller is unaffected in either direction. The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence. Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life. The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode. The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results. The MotorsNew-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.Top SafetyIn case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Read more less

Fuse Strip C20 - 160 AmpFeatures: Fuse Strip C20 160 Amp

Read more less

200 AMP ANL FuseFuse to be used in conjunction with Lewmar's bow thrusters and windlasses.  Designed using state-of-the-art technology and with customers in mind.*Sold as an Individual

Read more less

BOW PRO 361 Bow Thruster 36KGF - 12VThe BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.Features: Range of Boat Size: 23ft - 28ft Thrust in pounds force: 80 lbs Motor horse power: 2 Tunnel- center line below the waterline: 125MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less