CAM-PT-150-02 Aluminum PowerTower® for Cameras - 6"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with: FLIR - M100 / M200, M132, M232 cameras IRIS s118, s290, s295, s390, s395, s418 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 6 Box Dimensions: 8"H x 8"W x 8"L WT: 5 lbs UPC: 5060114796171 Quick Guide (pdf)

Read more less

Open Array Plate 1 for all Open Array RadarsThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.Open Array plate 1 (For all Open Array Radar models) Specifications: Type: Adapters Construction: Powder Coated Aluminum Box Dimensions: 3"H x 11"W x 12"L WT: 3.8 lbs UPC: 5060114796362

Read more less

Self Levelling Radar Mount - MastCompatible Units: Garmin GMR18/GMR18HD/GMR24HD Raymarine RD218/RD424 Lowrance 3G Broadband Simrad 3G Broadband Simrad DX45/DX60 The Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in the heel angle of the boat whilst eliminating all small oscillations.Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance-free Passive system - no power required Reduced weight aloft - complete system weighs only 3.4 kg Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722 Attached to the mast by four swivel feet - matches the profile of any mast 12 point fixing - highest quality Monel rivets Compact mount - radar extends only minimum distance from front of mast Materials: Finest quality machined and anodised aluminium mast adapter Marine grade 316 stainless steel cradle and base plate Kit Includes: 1 x Levelling mount 1 x Mast Adapter 1 x Complete fastening pack Specifications: Construction: Stainless Steel Type: Self Leveling Box Dimensions: 6"H x 16"W x 16"L WT: 10 lbs UPC: 5060114791152

Read more less

Mast MountsCompatible Units: Raymarine: 2kW Radome Fantom 24 GMR24HD / 24xHD Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 11"W x 21"L WT: 4.85 lbs UPC: 5060114790063 Quick Guide (pdf)

Read more less

16" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 16" Box Dimensions: 12"H x 12"W x 20"L WT: 7.9 lbs UPC: 839662008983 Quick Guide (pdf)

Read more less

Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 16" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 11.45 lbs

Read more less

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 3.9 lbs UPC: 015568089824 Quick Guide (pdf)

Read more less

12" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space-Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.  Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 11"H x 11"W x 20"L WT: 6.9 lbs UPC: 839662009355

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - BlackThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Camera PowerTower - White - 6"Maximize your camera's performance with our expertly designed camera PowerTower.Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Designed to mount Sionyx Nightwave, FLIR, Raymarine, VEI & NVTI cameras.Get ready to set your sights on new horizons with the CAM-PT-150-01. Designed specifically for the FLIR, Raymarine, VEI & NVTI cameras. The CAM-PT-150-01 ensures ease of installation, allowing the camera to fasten straight to the Camera PowerTower. Experience long-lasting high performance due to the clever design that eliminates the need for marine sealant. By adhering to the Scanstrut 4-step marine paint system, your PowerTower will stay looking smart, no matter what the sea throws at it!Features: Compact mounting profile to ensure a neat installation Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTower Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system Designed specifically for FLIR, Raymarine, VEI & NVTI cameras Specifications: Material: Aluminum Height: 150mm (5.9") Color: White Mounting Gasket Included: Yes Design: Aft (25-degree rake) Specifications: Construction: Aluminum Box Dimensions: 5"H x 7"W x 7"L WT: 1.6 lbs UPC: 5060114799301

Read more less

Camera PowerTower - Black - 6"Maximize your camera's performance with our expertly designed camera PowerTower.Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Designed to mount Sionyx Nightwave, FLIR, Raymarine, VEI & NVTI cameras. Get ready to set your sights on new horizons with the CAM-PT-150-01. Designed specifically for the FLIR, Raymarine, VEI & NVTI cameras. The CAM-PT-150-01 ensures ease of installation, allowing the camera to fasten straight to the Camera PowerTower. Experience long-lasting high performance due to the clever design that eliminates the need for marine sealant. By adhering to the Scanstrut 4-step marine paint system, your PowerTower will stay looking smart, no matter what the sea throws at it!Features: Compact mounting profile to ensure a neat installation Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTower Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system Designed specifically for FLIR, Raymarine, VEI & NVTI cameras Specifications: Material: Aluminum Height: 150mm (5.9") Color: White Mounting Gasket Included: Yes Design: Aft (25-degree rake) Specifications: Construction: Aluminum Box Dimensions: 5"H x 8"W x 11"L WT: 1.8 lbs UPC: 5060114799455

Read more less

Starlink Wedge Base & C5 Certified Lighting Kit - WhiteThis Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedge base, along with the 3NM C5 certified LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation Included Items: ADAR1DMLTB - Top Plate SVSLWB - Wedge Base LTBR - Light Bar LTBLED12C5 - Navigation Light

Read more less

Mast Mount for Starlink MiniThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem-treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 2 5/8 in. (66.68mm) The solid under body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Compact Light Bar for Thermal Cameras, Low-Light Cameras, & Search Lights (To Clear Closed Dome Radars) - No LightSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many (LTBR, LTBS, LTB12, LTBS24) can fold over 90° to allow for extra height clearance. *The LTBSF4 and LTBSF5 will clear most 18-24" closed dome radars using the ADAR1 top plate. If using Raymarine RD424 or Garmin Fantom 24, top plate ADAR1DMLTB must be used.

Read more less

Mast Mount for Starlink Standard Gen 3 AntennaThis Seaview Mast Mount for the Starlink Standard Gen3 antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 3.63" (92mm). The solid under-body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Starlink Mini Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The MINI Starlink Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAMINI modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Removable Base Kit for APXG3DMV2 Surface Mount for Starlink Standard Gen 3 AntennaThe optional removable base kit (APXG3DMRBV2) can be used to easily remove the Starlink Standard Gen3 antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXG3DMV2 (white) or APXG3DMV2BLK (black) can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Standard Gen3 in more than one location.Choose the Seaview APEX APXG3DMV2 and APXG3DMRBV2 for a durable, reliable, and easy-to-remove mount that ensures your Starlink Standard Gen3 Antenna performs flawlessly in any condition. Specifications: Construction: Aluminum Type: Mounting Brackets Box Dimensions: 5"H x 5"W x 20"L WT: 2.7 lbs UPC: 850047035929

Read more less

5" Vertical Camera Mount for Sionyx - BlackGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 3.45 lbs UPC: 850047035394

Read more less

5.5" Thermal Camera Mount for FLIR M300 Series CamerasSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable Management A hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. Specifications: Height: 5.5" Type: Aft Leaning Mount Box Dimensions: 7"H x 12"W x 12"L WT: 7.5 lbs UPC: 727908835526 Quick Guide (pdf)

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - BlackSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 8.9 lbs Quick Guide (pdf)

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - BlackThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 21"L WT: 4.15 lbs UPC: 850047035523

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss Cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 10" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 10.75 lbs

Read more less

6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base PlateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation. Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics. Small Base FootprintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 6.38" Box Dimensions: 7"H x 10"W x 10"L WT: 5.2 lbs UPC: 839662004800 Quick Guide (pdf)

Read more less

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features: Starlink Wedge Base hole pattern pre-dimpled in this modular top plate Water-tight gasket in the center of the plate to pass the Starlink cable The 1” thick starboard plate can accommodate a Seaview light bar Quick Guide (pdf)

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 9.55 lbs Quick Guide (pdf)

Read more less

Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel BaseStarlink quick-release top plate for Seaview "M1" and "M2" style mounts.Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4” tall The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 13"W x 13"L WT: 4.1 lbs UPC: 850047035004 Quick Guide (pdf)

Read more less

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed BaseFeatures: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 20"W x 20"L WT: 7.8 lbs UPC: 850047035011 Quick Guide (pdf)

Read more less

Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2The Seaview ADABLANK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.King StarboardTop Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean-looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 3.45 lbs UPC: 015568068645 Quick Guide (pdf)

Read more less

LTB-90 Light Bar Clamp f/LTB-R, LTB-S LTB-S24 & LTB-13 Light bars, allows for quick fold over of Light BarThe LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT usedCompatible with: LTBR LTBS LTBS24 LTB13 LTBRSS Specifications: Type: Light/GPS Brackets Box Dimensions: 4"H x 5"W x 5"L WT: 0.35 lbs UPC: 727908835120

Read more less

RW4-5 Degree Wedge Mount for Simrad TX06S & TX10SImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Simple & Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.DurableMade from marine grade polymer King Starboard. Specifications: Construction: Polymer Type: Wedges Box Dimensions: 2"H x 13"W x 13"L WT: 2.3 lbs UPC: 839662002097 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Domes Requires LTB Top - BlackSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights. Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over. Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts. This does not apply to the LTB-SF, LTB-OA and LTB-OA-6 light bars. Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 12"W x 31"L WT: 2.4 lbs UPC: 727908835397 Quick Guide (pdf)

Read more less

Mast Bracket with Flybridge Adapter Kit18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms.Features: Anodized Marine Grade Aluminum and Powder Coated Brilliant White Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms Models available for all brands of radomes Specifications: Construction: Aluminum Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.9 lbs UPC: 727908835625

Read more less

2" Diameter Compact Light Bar f/Thermal Cameras, Spotlights & Nav Light To Clear Closed Dome Radars *Must Pick an LTB TOPA compact 2” diameter light bar designed to fit Seaview modular mounts that will elevate most searchlights, thermal cameras with the universal plate, and a nav light above closed dome radars. This will clear 18-24" diameter closed dome radars with the exception of Raymarine RD424. Works with Mounts ending in M1 or M2.* Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C** Will clear 18"-24" closed dome radars, WITH THE EXCEPTION OF THE RAYMARINE RD424 Specifications: Type: Light/GPS Brackets Box Dimensions: 12"H x 12"W x 37"L WT: 10.45 lbs UPC: 727908835748 Quick Guide (pdf)

Read more less

5" Modular Mount Aft Raked 7x7 Base Top Plate Required - BlackThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. A Seaview Modular Top Plate is required and sold separately!Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately. Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 5" Box Dimensions: 7"H x 11"W x 12"L WT: 5.4 lbs UPC: 727908835410 Quick Guide (pdf)

Read more less

1-1/4" Light Bar 13" for FLIR & Searchlights Fold Over - 90° - Must Pick a LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts.  Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 15"W x 15"L WT: 3.2 lbs UPC: 727908835113 Quick Guide (pdf)

Read more less

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 11"W x 11"L WT: 2.3 lbs UPC: 015568089794 Quick Guide (pdf)

Read more less

12" Aft Leaning Camera MountGet the most out of your camera by using a Seaview Camera Mount. This Camera Mount is 12.5" tall and is aft leaning. The four pre-drilled 7″ × 7″ base plate makes it very simple and easy to install.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base foot print makes this a great solution to an installation where space is an issue.Fits: Raymarine - T200,T300,T400 Flir - MD324, MD625, M625S, M625CS, M612L, M617CS, M618CS Comnav - Explorer V2, V3 Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 13"H x 13"W x 17"L WT: 6.4 lbs UPC: 839662009331

Read more less

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 3"H x 13"W x 13"L WT: 2.8 lbs UPC: 839662002622 Quick Guide (pdf)

Read more less

LTB Top Standard 1"-14 Thread for GPS or Wind TransducerAdapter to mount a GPS unit or wind transducer. Uses standard 1"-14 threads. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 5"W x 5"L WT: 0.3 lbs UPC: 839662009522 Quick Guide (pdf)

Read more less

Modular Plate for Intellian/KVH/Glomex/Thrane & Thrane/Raymarine/Sea-King/Sea-Tel/VDOSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 4"H x 15"W x 15"L WT: 5 lbs UPC: 839662009133 Quick Guide (pdf)

Read more less

4 Degree Wedge for Open Array RadarsImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymerCompatible Manufacturers:Raymarine Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 2 lbs UPC: 839662002080 Quick Guide (pdf)

Read more less

Low Profile Satdome Adapter for KVH, Raymarine, and IntellianSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. Specifications: Type: Adapters Box Dimensions: 4"H x 15"W x 16"L WT: 5.3 lbs UPC: 839662005081 Quick Guide (pdf)

Read more less

Modular Top Plate for Flir M or Ray T Series Thermal CamerasSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.King StarboardMade of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.  Specifications: Type: Adapters Box Dimensions: 1"H x 11"W x 16"L WT: 3.5 lbs UPC: 839662009171 Quick Guide (pdf)

Read more less

Low Profile Adapter for Intellian, KVH, Raymarine and Sea-TelSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation.*Reinforced with an anodized aluminum insert. This provides superior strength and durability.  Specifications: Type: Adapters Box Dimensions: 4"H x 16"W x 16"L WT: 4.5 lbs UPC: 839662005876 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Open Array RadarSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts.   Specifications: Type: Light/GPS Brackets Box Dimensions: 6"H x 11"W x 42"L WT: 5.05 lbs UPC: 839662009195 Quick Guide (pdf)

Read more less