Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. Specifications: Type: Adapters Box Dimensions: 5"H x 13"W x 17"L WT: 3 lbs UPC: 015568089831 Quick Guide (pdf)

Read more less

4 Degree Wedge for Power MountThe most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 0.8 lbs UPC: 839662008907 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - WhiteThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

APEX Surface Mount for Starlink Mini - BlackThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance.The APXMDM features end caps made from machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. These end caps are securely attached to black hard-anodized aluminum strips, providing the strength needed to firmly mount the Starlink Mini antenna on any flat surface, whether stationary or in motion.Enhanced Support for Mobile ApplicationsWhile the Starlink Mini Antenna comes with a pressure-fit kickstand suitable for flat, non-mobile surfaces, it requires additional support when mounted on a vehicle or other fast-moving vessel. The Seaview APXMDM mount offers a reliable and easily assembled solution, ensuring your antenna stays securely in place.Complete with Waterproof Cable SealIncluded with the APXMDM is Seaview's CG2090W horizontal cable seal, providing a waterproof entry point for your cables, essential for maintaining the integrity of your setup in any environment.Optional Removable Base KitFor added convenience, you can opt for the optional removable base kit (APXMDMRB) to easily remove the Starlink Mini antenna when needed.Choose the Seaview APEX APXMDM for a durable, reliable, and easy-to-install mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

4 Degree Wedge for Open Array RadarsImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymerCompatible Manufacturers: Furuno Garmin Koden Simrad Sitex Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 2 lbs UPC: 839662002073 Quick Guide (pdf)

Read more less

Modular Plate for Most Closed Domes & Open Arrays - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 4.8 lbs UPC: 727908835441 Quick Guide (pdf)

Read more less

APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 9.84 Box Dimensions: 11"H x 13"W x 13"L WT: 7.8 lbs UPC: 5060114795419 Quick Guide (pdf)Brochure (pdf)

Read more less

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 14"L WT: 3.4 lbs UPC: 727908835496 Quick Guide (pdf)

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Removable Base for Pedestal Mounts with 7x7 Base Plate - WhiteThese innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of losing a knob.Note: The black knobs are captive so they will not fall off.

Read more less

Universal 24" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex Specifications: Type: Mast Mount Box Dimensions: 7"H x 16"W x 21"L WT: 5.4 lbs UPC: 839662005227

Read more less

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 3.79 lbs UPC: 015568089770 Quick Guide (pdf)

Read more less

Dual PowerTower® Strut - RadomeThe Modular Dual PowerTower® has been designed to allow your radome radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications: Material: 6082 Aluminum extrusion Coating: Polyester powder Finish: Gloss white Specifications: Construction: Aluminum Type: Dual Mount Box Dimensions: 12"H x 22"W x 28"L WT: 15.2 lbs UPC: 5060114796317

Read more less

Mast Mounts For 18" Garmin, KVH M3 & Raymarine 37STVCompatible Units: Garmin GMR18/GMR18HD/18Xhd/18HD+/Fantom18/GMR40 B&G / Lowrance /Simrad DX45/3G/4G / HALO20 / HALO20+ Intellian i3 KVH TracVision M2/M3 Raymarine 37STV /Quantum / Quantum 2 Sea Tel Coastal 14 Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminum Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 20"L WT: 5.25 lbs UPC: 5060114790902 Quick Guide (pdf)

Read more less

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4/Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate RequiredInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately* Specifications: Type: Dual Mount Height: 12.5" Box Dimensions: 14"H x 18"W x 36"L WT: 23 lbs UPC: 839662009027 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 13"W x 31"L WT: 3.5 lbs UPC: 839662009188 Quick Guide (pdf)

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - WhiteThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 20"L WT: 4.05 lbs UPC: 850047035516

Read more less

Removable Base Kit for APXMDM Surface Mount for Starlink MiniThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

18" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad Specifications: Type: Mast Mount Box Dimensions: 7"H x 13"W x 20"L WT: 8.25 lbs UPC: 839662006606 Quick Guide (pdf)

Read more less

CAM-PT-150-02 Aluminum PowerTower® for Cameras - 6"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with: FLIR - M100 / M200, M132, M232 cameras IRIS s118, s290, s295, s390, s395, s418 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 6 Box Dimensions: 8"H x 8"W x 8"L WT: 5 lbs UPC: 5060114796171 Quick Guide (pdf)

Read more less

Open Array Plate 1 for all Open Array RadarsThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.Open Array plate 1 (For all Open Array Radar models) Specifications: Type: Adapters Construction: Powder Coated Aluminum Box Dimensions: 3"H x 11"W x 12"L WT: 3.8 lbs UPC: 5060114796362

Read more less

Self Levelling Radar Mount - MastCompatible Units: Garmin GMR18/GMR18HD/GMR24HD Raymarine RD218/RD424 Lowrance 3G Broadband Simrad 3G Broadband Simrad DX45/DX60 The Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in the heel angle of the boat whilst eliminating all small oscillations.Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance-free Passive system - no power required Reduced weight aloft - complete system weighs only 3.4 kg Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722 Attached to the mast by four swivel feet - matches the profile of any mast 12 point fixing - highest quality Monel rivets Compact mount - radar extends only minimum distance from front of mast Materials: Finest quality machined and anodised aluminium mast adapter Marine grade 316 stainless steel cradle and base plate Kit Includes: 1 x Levelling mount 1 x Mast Adapter 1 x Complete fastening pack Specifications: Construction: Stainless Steel Type: Self Leveling Box Dimensions: 6"H x 16"W x 16"L WT: 10 lbs UPC: 5060114791152

Read more less

Mast MountsCompatible Units: Raymarine: 2kW Radome Fantom 24 GMR24HD / 24xHD Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 11"W x 21"L WT: 4.85 lbs UPC: 5060114790063 Quick Guide (pdf)

Read more less

16" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 16" Box Dimensions: 12"H x 12"W x 20"L WT: 7.9 lbs UPC: 839662008983 Quick Guide (pdf)

Read more less

Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 16" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 11.45 lbs

Read more less

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 3.9 lbs UPC: 015568089824 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - BlackThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Camera PowerTower - White - 6"Maximize your camera's performance with our expertly designed camera PowerTower.Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Designed to mount Sionyx Nightwave, FLIR, Raymarine, VEI & NVTI cameras.Get ready to set your sights on new horizons with the CAM-PT-150-01. Designed specifically for the FLIR, Raymarine, VEI & NVTI cameras. The CAM-PT-150-01 ensures ease of installation, allowing the camera to fasten straight to the Camera PowerTower. Experience long-lasting high performance due to the clever design that eliminates the need for marine sealant. By adhering to the Scanstrut 4-step marine paint system, your PowerTower will stay looking smart, no matter what the sea throws at it!Features: Compact mounting profile to ensure a neat installation Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTower Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system Designed specifically for FLIR, Raymarine, VEI & NVTI cameras Specifications: Material: Aluminum Height: 150mm (5.9") Color: White Mounting Gasket Included: Yes Design: Aft (25-degree rake) Specifications: Construction: Aluminum Box Dimensions: 5"H x 7"W x 7"L WT: 1.6 lbs UPC: 5060114799301

Read more less

Camera PowerTower - Black - 6"Maximize your camera's performance with our expertly designed camera PowerTower.Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Designed to mount Sionyx Nightwave, FLIR, Raymarine, VEI & NVTI cameras. Get ready to set your sights on new horizons with the CAM-PT-150-01. Designed specifically for the FLIR, Raymarine, VEI & NVTI cameras. The CAM-PT-150-01 ensures ease of installation, allowing the camera to fasten straight to the Camera PowerTower. Experience long-lasting high performance due to the clever design that eliminates the need for marine sealant. By adhering to the Scanstrut 4-step marine paint system, your PowerTower will stay looking smart, no matter what the sea throws at it!Features: Compact mounting profile to ensure a neat installation Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTower Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system Designed specifically for FLIR, Raymarine, VEI & NVTI cameras Specifications: Material: Aluminum Height: 150mm (5.9") Color: White Mounting Gasket Included: Yes Design: Aft (25-degree rake) Specifications: Construction: Aluminum Box Dimensions: 5"H x 8"W x 11"L WT: 1.8 lbs UPC: 5060114799455

Read more less

Starlink Wedge Base & C5 Certified Lighting Kit - WhiteThis Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedge base, along with the 3NM C5 certified LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation Included Items: ADAR1DMLTB - Top Plate SVSLWB - Wedge Base LTBR - Light Bar LTBLED12C5 - Navigation Light

Read more less

Mast Mount for Starlink MiniThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem-treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 2 5/8 in. (66.68mm) The solid under body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Mast Mount for Starlink Standard Gen 3 AntennaThis Seaview Mast Mount for the Starlink Standard Gen3 antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 3.63" (92mm). The solid under-body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Starlink Mini Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The MINI Starlink Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAMINI modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

5" Vertical Camera Mount for Sionyx - BlackGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 3.45 lbs UPC: 850047035394

Read more less

5.5" Thermal Camera Mount for FLIR M300 Series CamerasSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable Management A hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. Specifications: Height: 5.5" Type: Aft Leaning Mount Box Dimensions: 7"H x 12"W x 12"L WT: 7.5 lbs UPC: 727908835526 Quick Guide (pdf)

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - BlackSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 8.9 lbs Quick Guide (pdf)

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - BlackThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 21"L WT: 4.15 lbs UPC: 850047035523

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss Cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base PlateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation. Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics. Small Base FootprintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 6.38" Box Dimensions: 7"H x 10"W x 10"L WT: 5.2 lbs UPC: 839662004800 Quick Guide (pdf)

Read more less

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features: Starlink Wedge Base hole pattern pre-dimpled in this modular top plate Water-tight gasket in the center of the plate to pass the Starlink cable The 1” thick starboard plate can accommodate a Seaview light bar Quick Guide (pdf)

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 9.55 lbs Quick Guide (pdf)

Read more less

Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel BaseStarlink quick-release top plate for Seaview "M1" and "M2" style mounts.Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4” tall The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 13"W x 13"L WT: 4.1 lbs UPC: 850047035004 Quick Guide (pdf)

Read more less

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed BaseFeatures: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 20"W x 20"L WT: 7.8 lbs UPC: 850047035011 Quick Guide (pdf)

Read more less

Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2The Seaview ADABLANK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.King StarboardTop Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean-looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 3.45 lbs UPC: 015568068645 Quick Guide (pdf)

Read more less