2-3/8" Explorer Fixed-Height Locking Pedestal - 9"Anodized aluminum 2-3/8″ pedestal with 9″ round satin anodized base. Use with Trac-Lock™ slide or swivel (sold separately).

Read more less

Fish Pro High Back Folding Seat - Charcoal/TanExceptional high back contour lumbar cushion cradles your back for maximum support. Designed for style, comfort and durability. Features: Folds down easily Concealed pinch proof hinge Optional armrest can be added (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2-7/8" Trac-Lock™ III Non-Locking Swivel2-7/8″ Post mount with bushing & centrally located tension knob for snug fit, easily reachable with left or right hand. Made of high-strength aluminum with a powder-coated finish. Adds 7/8″ to the height of the pedestal.

Read more less

KingPin™ Base Socket CoverPlastic KingPin™ cover keeps sockets clear when not in use. Use on KingPin™ 3/4″ pin base. (sold as each).

Read more less

Swivl-Eze Pedestal 7"Features: 7 inches tall Exceptional durability Reinforced Black powder coated for a long-lasting finish Quick Guide (pdf)

Read more less

Director's Chair with Black Cushion - TeakFeatures: Teak Director's Chair with Cushion Seat Covers Chair with Black Seat Cushion Stainless steel hardware 18" high from floor to seat Folds for easy storage Oiled math Size: 23"W x 33-1/2"H x 17-1/2"D Folded: 16"W x 26-3/4"H x 9-1/2"D

Read more less

KingPin™ 7" x 7" Offset - Stainless Steel - Square BaseFeatures: 7″ x 7″ Stainless Steel Base, With Nylon Bushing And Satin Finish Offset Bushing 3″ Cup Depth Below The Deck Mount Requires A 2-1/2″ Hole In Deck Use With Standard KingPin™ Posts (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pro Stand-Up Seat - WhiteBicycle Style Seat Comes With Foam Padding Covered In Marine Grade Vinyl. Plastic Substrate; No More Wood To Rot Out! Compact Design Allows For More Room When Standing UpTo Fish. Whether You Sit Or Lean Against This Seat, It Provides Comfort And Stability.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Shock Absorber Seat - P Series - DNM Silver V2The SHOCK-WBV P-Series is specifically designed, tested, and manufactured in the UK to provide comfort by reducing whole-body vibration. It’s a straightforward process to retrofit a P-series system. Once it’s in place, the system is simple to adjust for a wide range of passenger weights and sea conditions. It provides a smoother, safer ride because shock and vibration are significantly reduced, meaning a longer time can be comfortably spent on the water.Specifications: Color: DNM silver V2 Travel: 84mm (3.32 in.) Vertical: 72mm (2.83 in.) Horizontal: 43mm (1.69 in.) Unit Weight: 3.9kg (8.60 lbs.)

Read more less

Power-Rise Adjustable Stand-Up Post - Stainless SteelStainless Steel Pedestal, Adjusts From 22-1/2″ to 29-1/2″ Use As Seat Or Leaning Post. 3 Degree Tilt Cast Aluminum Swivel, Rotates 360°. Use With Any Non-Locking Spring-Lock™ Base (sold separately).Rated ABYC Class H-31 B (Fishing Only) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

S5-AL Suspension Base - BlackThe Shockwave S5-AL suspension base (formerly the S5 Sentinel) provides comfort and safety to boaters, offering them an experience they’ve never had before. It offers a smoother, safer, and more comfortable ride, protecting occupants from the shock of wave impact. Recreational boaters can stay out longer and travel farther with less fatigue. Made from anodized A360 cast aluminum that has been powder-coated and fitted with 316 stainless steel hardware, the S5-AL suspension base utilizes a four-link forward action suspension design.Fitted with a FOX Rhythm air-sprung shock with adjustable rebound, suspension travel is 4-inch vertical and 1.5-inch forward, mitigating deceleration associated with wave impact.A shock pump with a pressure gauge is included with your purchase at no extra cost.Features: Designed and manufactured in Canada Custom-tuned and valved marine FOX Rhythm air spring and shock with adjustable rebound Surge protection: Suspension travel is 4-inch vertical and 1.5-inch forward, mitigating deceleration associated with wave impacts 4-Link Forward Action Anodized A360 Cast Aluminum, 316 SS Hardware, Powder Coated Minimal parts count and simple construction Easy to mount and adapt to the current seating Vessel Application:The S5-AL suspension base is most often found on fishing boats, coastal cruisers, ski/wake boats, guide boats, fisheries boats, whale watching boats, crew boats and yacht tenders. Due to its universal design, the S5-AL can be fitted to almost any boat and any seat.

Read more less

SWIVL-EZE Lock'N-Pin 3/4" Pedestal Kit 13" Post 7" x 7" Stainless Steel Base Plate ThreadedFeatures: Includes 7" x 7" stainless steel threaded base plate, black E-coated seat mount and 13" high seat post The 3/4" system gives you outstanding economical performance Great for adding seating to fishing, pontoon or cruising boats Lock'N-Pin products meet ABYC Standard

Read more less

Spring-Lock™ Replacement End CapReplacement Spring-Lock™ end cap for securing the locking latch in the post.

Read more less

4" Elite Fixed-Height Pedestal - 30"4″ Pedestal of .213″ thick aluminum with 12″ round base, polished finish. The pedestal is sized and pressed into base then rim welded for stability. Use with any 4″ Mariner II or Workhorse slide or swivel (sold separately).

Read more less

Swivl-Eze Adjustable Pedestal 11-1/2" - 17-1/2"Features: Adjustable Range (inch): 11-1/2" - 17-1/2" Exceptional durability Reinforced Black powder coated for a long-lasting finish Quick Guide (pdf)

Read more less

2-7/8" Heavy Duty Mainstay with SwivelNon-removable pedestal system in 2-7/8" offers a heavy-duty base and post for today's larger and faster recreational boats. The base is permanent mold AC7A aluminum alloy with an anodized finish for maximum strength and corrosion protection. Then a 2-7/8" heavy-duty extruded post is pressed and hydra-formed into the base mechanically forming them together. This proprietary process allows maximum strength for a sturdy pedestal.Features: 2-7/8 in. pedestal with 9″ round base Rigid 4-keyed aluminum post, anodized finish Air-powered height adjustment Adjusts (inches) 14" to 19.5" Warranty: 5 years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Offshore Fixed-Height Helm Pedestal PackagePackage includes heavy-duty 4″ Workhorse slide & swivel with anodized finish, fixed-height brite dip 4″ pedestal with 12″ round polished base. The Helmsman flip-up footrest flips up out of the way. Pedestal height 24″. Overall height 27-1/2″.

Read more less

Economy Folding Seat - RedFeatures: Now A Comfortable Cushioned Seat To Support Your Backside  Durable Upholstery Folds Easily Strap With Snap To Keep Seat Secure. Rigid Injection Molded Frame Heavy-Duty Aluminum Powder Coated Hinges  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height 4″ pedestal with 12″ round base, 316 electro-polished stainless steel 28″ round footrest, and black powder-coated 5-legged deck base. Overall height 25-1/2″.

Read more less

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electro-polished stainless steel half-round footrest, and black powder-coated 5-legged deck base. Pedestal adjusts 13-1/2″ to 19″. Overall height 20″ to 27″.

Read more less

EVO Lite Teal with Flex Suspension No PlinthLightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Build your own suspension seat for your boat from A Shark FLEX suspension unit. You can select your seat type, choose from a range of base options, and add accessories to suit your requirements.Specifications: Total weight: 8kg/17.6lbs Suspension travel: 150mm/6" Weight capacity: 100kg/220lbs Specifications of the FLEX suspension unit: Simplicity: has only 3 unique parts Compatible with most third-party seats and attachments (including swivels) as well as Shark seats 225mm of progressive and ULTRA-SMOOTH travel Light: Only 9kg (20lb) 450mm overall height Compact: 300mm wide, 350mm deep Less fatigue: From 3-axis shock mitigation eliminates whiplash and takes stress off your body Non-corroding: soft-edged and non-marking, built with 316 stainless and Flexanite Super low maintenance Tested: 1 Million full 10g impacts Crash test rating: To HSC2000 Annex 10 requirements 3-year global manufacturer's warranty on all parts Independent tests reveal that Flex outperformed a well-known European brand Easy one-man installation Easily repairable: the shock can be replaced in under 2 minutes by one person Suspension can be bolted directly to your deck with 8 bolts (minimum)

Read more less

EVO Teal with Flex Suspension No PlinthLightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Build your own suspension seat for your boat from A Shark FLEX suspension unit. You can select your seat type, choose from a range of base options, and add accessories to suit your requirements.Specifications: Total weight: 18.5kg/40.8lbs Suspension travel: 225mm/9" Weight capacity: 120kg/265lbs Specifications of the FLEX suspension unit: Simplicity: has only 3 unique parts Compatible with most third-party seats and attachments (including swivels) as well as Shark seats 225mm of progressive and ULTRA-SMOOTH travel Light: Only 9kg (20lb) 450mm overall height Compact: 300mm wide, 350mm deep Less fatigue: From 3-axis shock mitigation eliminates whiplash and takes stress off your body Non-corroding: soft-edged and non-marking, built with 316 stainless and Flexanite Super low maintenance Tested: 1 Million full 10g impacts Crash test rating: To HSC2000 Annex 10 requirements 3-year global manufacturer's warranty on all parts Independent tests reveal that Flex outperformed a well-known European brand Easy one-man installation Easily repairable: the shock can be replaced in under 2 minutes by one person Suspension can be bolted directly to your deck with 8 bolts (minimum)

Read more less

2-3/8" Thread-Lock™ Fixed-Height Post - 13"Sturdy 2-3/8″ high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with Trac-Lock™ non-locking seat mount (sold separately).

Read more less

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swivel. Adds structural support to rotational molded seats and other plastic seat bottoms.

Read more less

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-height post (sold separately). Can be used with Thread-Lock™ table and grill posts (sold separately).

Read more less

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

Read more less

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

Read more less

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

Read more less

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels 6″ fore and aft. Flip handle for locking pin.

Read more less

2-3/8" Explorer Fixed-Height Locking Pedestal - 10"Anodized aluminum 2-3/8″ pedestal with 9″ round satin anodized base. Use with Trac-Lock™ slide or swivel (sold separately).

Read more less

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower unit.

Read more less

Bolt-On Clevis PinReplacement tension clip between the extrusion and bolt-on T-brace.

Read more less

5-Legged Deck Base with Plate33″ Diameter 5-legged deck base with pre-drilled 5/16″-18 tap mounting plate to accept any Springfield® Marine 12″ or 9″ round pedestal base. Approximately 4″ high with floor pods or 6″ high with casters. Pods and casters sold separately.

Read more less

2-3/8" Adjustable Mainstay Package with Locking SwivelPackage includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base, and locking Trac-Lock™ swivel.Specifications: Adjusts: 14" to 20" Seat Mount: 3100031-LAR1

Read more less

ULTRA Seat with Flex Pod Suspension No PlinthThe starting point for any jockey seat ULTRA is the flagship model, adaptable and reliable for both recreational and military markets. Users can customize it with upgrades from our modular system or keep it simple.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Specifications: UV-protected, tough, easy-clean rubber seat foams. EAF (Energy Absorbing Foam). 225mm progressive and ULTRA-SMOOTH travel (no weight adjustments needed between 40kg and 120kg) Side grab handles ULTRA light 13kg total Efficient 580 x 580mm centers for deck layout spacing Less fatigue from 3-axis shock mitigation eliminates whiplash from lateral and fore-aft forces Non-corroding, soft-edged, and non-marking 316 stainless, polycarbonate, and Flexanite construction Super low maintenance Tested 1 Million full 10g impacts (200mm displacement, 100ms duration, 100kg payload) Crash tested to HSC2000 Annex 10 requirements. 3-year global manufacturer's warranty on all parts Lab tested to outperform the well-known European benchmark Easy one-man installation and repairable (the shock can be replaced in under 2 minutes by one person) Comes with side grips by default

Read more less

Economy Casting Seat Cover - Extra SmallSpringfield Marine’s Economy Folding Seat Cover provides enhanced water resistance and UV protection for your boat’s folding seats, keeping them safe from harsh elements. Made from durable, 2-ply polyester, the outer layer offers water and UV resistance, while the inner lining adds extra protection. A poly drawstring with a locking fastener ensures a snug fit. For convenience, it includes a 6″ x 6″ mesh storage bag with a drawstring fastener for compact storage. A must-have accessory for protecting and extending the life of your boat seats.

Read more less

EASY-FIT Cover - Grey with FastenersStyling your seat has never been easier. Simply fit and tighten to achieve a fully upholstered look.

Read more less

Economy Low-Back Seat Cover - SmallSpringfield Marine’s Economy Folding Seat Cover provides enhanced water resistance and UV protection for your boat’s folding seats, keeping them safe from harsh elements. Made from durable, 2-ply polyester, the outer layer offers water and UV resistance, while the inner lining adds extra protection. A poly drawstring with a locking fastener ensures a snug fit. For convenience, it includes a 6″ x 6″ mesh storage bag with a drawstring fastener for compact storage. A must-have accessory for protecting and extending the life of your boat seats.

Read more less

2-3/8" Plug-In Hi-Lo Replacement BushingReplacement bushing for 2-3/8″ Plug-In™ Hi-Lo seat mount. Helps to distribute the weight load across the top of the post.

Read more less

A2 Plinth Black Alloy 200-300mm Added HeightSpecifications: Fastenings: M8x8 316 Stainless Steel Weight: 4kg/8.7lbs Alloy Height adjustable

Read more less

Economy Bucket Seat Cover - LargeSpringfield Marine’s Economy Folding Seat Cover provides enhanced water resistance and UV protection for your boat’s folding seats, keeping them safe from harsh elements. Made from durable, 2-ply polyester, the outer layer offers water and UV resistance, while the inner lining adds extra protection. A poly drawstring with a locking fastener ensures a snug fit. For convenience, it includes a 6″ x 6″ mesh storage bag with a drawstring fastener for compact storage. A must-have accessory for protecting and extending the life of your boat seats.

Read more less

Elite Slide & Swivel - 4"8-1/4″ x 13″ seat mounting platform. Anodized slide and polish post mount fits over 4″ pedestals, locks and tightens securely to prevent wobble. Large pivot area ensures stability. Rotates 360°. Slide travels 5-3/8″ fore and aft. Adds 1-1/2″ to the height of the pedestal.

Read more less

EASY-FIT Cover - Black with FastenersStyling your seat has never been easier. Simply fit and tighten to achieve a fully upholstered look.

Read more less

ULTRA Lite Seat with Flex Pod Suspension No PlinthThe starting point for any jockey seat ULTRA is the flagship model, adaptable and reliable for both recreational and military markets. Users can customize it with upgrades from our modular system or keep it simple.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Specifications: UV-protected, tough, easy-clean rubber seat foams. EAF (Energy Absorbing Foam). 225mm progressive and ULTRA-SMOOTH travel (no weight adjustments needed between 40kg and 120kg) Side grab handles ULTRA light 13kg total Efficient 580 x 580mm centers for deck layout spacing Less fatigue from 3-axis shock mitigation eliminates whiplash from lateral and fore-aft forces Non-corroding, soft-edged, and non-marking 316 stainless, polycarbonate, and Flexanite construction Super low maintenance Tested 1 Million full 10g impacts (200mm displacement, 100ms duration, 100kg payload) Crash tested to HSC2000 Annex 10 requirements. 3-year global manufacturer's warranty on all parts Lab tested to outperform the well-known European benchmark Easy one-man installation and repairable (the shock can be replaced in under 2 minutes by one person) Comes with side grips by default

Read more less

FLEXpod HD Suspension with Firmer Shock & StiffenerToughened weight-saving HD stands for heavy-duty. 2 alloy plates are added to stiffen the suspension to allow for approved 3rd party seats. Available complete or as an upgrade kit.Specifications: Weight: 4.3kg/9.5lbs Impact Protection: 6g Weight Capacity: 100kg/220lbs Travel: 150mm/6" Specifications of the FLEX suspension unit: Simplicity: has only 3 unique parts Compatible with most third-party seats and attachments (including swivels) as well as Shark seats 225mm of progressive and ULTRA-SMOOTH travel Light: Only 9kg (20lb) 450mm overall height Compact: 300mm wide, 350mm deep Less fatigue: From 3-axis shock mitigation eliminates whiplash and takes stress off your body Non-corroding: soft-edged and non-marking, built with 316 stainless and Flexanite Super low maintenance Tested: 1 Million full 10g impacts Crash test rating: To HSC2000 Annex 10 requirements 3-year global manufacturer's warranty on all parts Independent tests reveal that Flex outperformed a well-known European brand Easy one-man installation Easily repairable: the shock can be replaced in under 2 minutes by one person Suspension can be bolted directly to your deck with 8 bolts (minimum)

Read more less

A1 Plinth Black Alloy 120-170mm Added HeightSpecifications: Fastenings: M8x8 316 Stainless Steel Weight: 3.2kg/7lbs Alloy Height adjustable Adapter plate available for wider spacings

Read more less

A3 Plinth Black Alloy 285-430mm Added HeightSpecifications: Fastenings: M8x8 316 Stainless Steel Weight: 5.2kg/11.5lbs Alloy Height adjustable

Read more less

EPIC Seat with Flex Suspension - Grey Vinyl - Regular HandleUpholstered leather-like finish EPIC is our upholstered jockey seat with a rear grab handle. Available in 4 colors, so you can match the style of your boat.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Specifications: Extra comfort, fully waterproof vinyl (UV protected) EAF (Energy Absorbing Foam) 225mm progressive and ULTRA-SMOOTH travel (no weight adjustments needed between 40kg and 120kg) Less fatigue from 3-axis shock mitigation eliminates whiplash from lateral and fore-aft forces Non-corroding, soft-edged, and non-marking 316 stainless, polycarbonate, and Flexanite construction Super low maintenance Tested 1 Million full 10g impacts (200mm displacement, 100ms duration, 100kg payload) Crash tested to HSC2000 Annex 10 requirements 3-year global manufacturer's warranty on all parts Lab tested to outperform the well-known European benchmark Lightweight and easy one-man installation Easily repairable (the shock can be replaced in under 2 minutes by one person) Comes with side grips by default Weight: 14.1kg/30.1lbs Impact Protection: 10g Weight Capacity: 120kg/265lbs Travel: 225mm/9"

Read more less