ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Single Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

Hydraulic Steering Fluid - QuartThis is a perfect formulation for the most demanding marine environments. Engineered for use in all hydraulic steering solutions.Features: Applications: All Hydraulic Steering Systems High viscosity index Corrosion inhibited Oxidation resistant Excellent anti-wear performance Specifications: Size: Quart Type: ISO 15 Low Temp Mineral Hydraulic Fluid

Read more less

MasterDrive Steering System - Single Station/Twin Cylinder Kit - UC128TS - SVS 1 & UC128TS - SVS 1P CylindersThe MasterDrive power-assisted outboard steering system delivers effortless steering for the most demanding applications, regardless of speed or torque conditions.Features: Eliminates torque at the steering wheel Three different selectable levels of power give the driver the desired feeling on the wheel (PATENTED) Automatically reverts to manual mode in case of power loss High efficiency, low Amp draw, low noise Kit Includes: UH40-F - MasterDrive 40cc front mount helm UCMD - MasterDrive user interface UPMD - MasterDrive power unit 12V DC UC128TS - SVS 1 front mount cylinder  UC128TS - SVS 1P front mount cylinder  OIL 15 - 4 quarts This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Tilt Mechanism for L6 Power SteeringTilt mechanism with a range of 48° and five locking positions, suitable for Masterdrive TM steering systems.

Read more less

Straight Helm Fitting 1/4 NPT for UP Comp Line & Autopilot Return LineFitting for the compensating line in the UP series helms or autopilot return line.Specifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

Read more less

Tee Fitting with Bleed Nipple for IB & Stern Drive CylindersBleed fitting for all inboard and stern drive cylinders.Specifications: 1/4 NPT to 3/8 COMP FITTING Cylinder Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

Read more less

45° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

Brass Compression Nut w/Sleeve #61CA-6Typical Application:3/8" Compression Nut with ferrule for cut to length nylon tubingSpecifications: 3/8 COMP NUT Fitting Side = 9/16 - 24 UNEF 2B Hose Side = 3/8 Compression Ferrule

Read more less

90° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

X52 Tilt Mechanism w/Mounting HardwareTilt range of 48° and five locking positions - suitable on tilt mount helmsX52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems

Read more less

M90 Mach Black Rotary Steering Cable - 10'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 10' Box Dimensions: 3"H x 18"W x 27"L WT: 6.2 lbs UPC: 702755052029

Read more less

M90 Mach Rotary Steering Cable - 10'The M90 Mach 10' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 10' Box Dimensions: 3"H x 18"W x 28"L WT: 6 lbs UPC: 702755044031

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 15 Feet Specifications: Cable Length (Feet): 15' Box Dimensions: 3"H x 18"W x 28"L WT: 7.85 lbs UPC: 702755017134

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 17 Feet Specifications: Cable Length (Feet): 17' Box Dimensions: 3"H x 18"W x 28"L WT: 8.55 lbs UPC: 702755017158

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 12 Feet Specifications: Cable Length (Feet): 12' Box Dimensions: 3"H x 18"W x 23"L WT: 6.75 lbs UPC: 702755017103

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 14 FeetFittings: 3/8 Compression Fitting Specifications: Cable Length (Feet): 14' Box Dimensions: 5"H x 15"W x 15"L WT: 3.15 lbs UPC: 702755015918

Read more less

Universal Kit 4" Aux Offset 23"-26" Steering SystemEZ-Steer Universal Auxiliary Outboard Steering System: Take Control of Your Boating ExperienceDiscover the next evolution in auxiliary outboard steering with the EZ-Steer Universal system. Designed to simplify your boating experience, the EZ-Steer Universal Kit consolidates over 1000 SKU combinations into a streamlined, easy-to-choose product line. Available in three versatile auxiliary offsets—3″, 4″, and 7″—and covering a range of center-to-center distances, this system ensures compatibility with nearly every outboard and sterndrive application. Whether you’re trolling, docking, or simply cruising, this system maintains an unrestricted forward view, giving you full control and peace of mind.Top Features of EZ-Steer Universal: Integrated Steering: Control the auxiliary engine from the main wheel for added safety and convenience Uninterrupted Operation: Stay connected during main power runs with clear forward visibility Improved Efficiency: Save fuel and reduce maintenance with an optimized main/kicker combo The EZ-Steer Universal Kit allows you to steer your auxiliary engine directly from your boat’s main wheel, providing you with a safer and more convenient boating experience. Simplified Selection: Choose from three auxiliary offsets (3″, 4″, 7″) and varying rod lengths for a perfect fit Easy Installation: Includes all necessary hardware for quick, hassle-free setup Complete Kit: Comes with everything needed, backed by a one-year limited warranty By offering a single, adaptable solution, the EZ-Steer Universal revolutionizes auxiliary steering, providing a robust, user-friendly system that stands out in the marketplace.Steer with Ease & ConfidenceThe EZ-Steer Universal Auxiliary Outboard Steering System revolutionizes auxiliary steering by offering a universally compatible, easy-to-install solution.Why Choose EZ-Steer? Safety and confidence Better economy, better performance Simplified selection Quick installation Quick Guide (pdf)

Read more less

Universal Kit 3" Aux Offset 23"-26" Steering SystemEZ-Steer Universal Auxiliary Outboard Steering System: Take Control of Your Boating ExperienceDiscover the next evolution in auxiliary outboard steering with the EZ-Steer Universal system. Designed to simplify your boating experience, the EZ-Steer Universal Kit consolidates over 1000 SKU combinations into a streamlined, easy-to-choose product line. Available in three versatile auxiliary offsets—3″, 4″, and 7″—and covering a range of center-to-center distances, this system ensures compatibility with nearly every outboard and sterndrive application. Whether you’re trolling, docking, or simply cruising, this system maintains an unrestricted forward view, giving you full control and peace of mind.Top Features of EZ-Steer Universal: Integrated Steering: Control the auxiliary engine from the main wheel for added safety and convenience Uninterrupted Operation: Stay connected during main power runs with clear forward visibility Improved Efficiency: Save fuel and reduce maintenance with an optimized main/kicker combo The EZ-Steer Universal Kit allows you to steer your auxiliary engine directly from your boat’s main wheel, providing you with a safer and more convenient boating experience. Simplified Selection: Choose from three auxiliary offsets (3″, 4″, 7″) and varying rod lengths for a perfect fit Easy Installation: Includes all necessary hardware for quick, hassle-free setup Complete Kit: Comes with everything needed, backed by a one-year limited warranty By offering a single, adaptable solution, the EZ-Steer Universal revolutionizes auxiliary steering, providing a robust, user-friendly system that stands out in the marketplace.Steer with Ease & ConfidenceThe EZ-Steer Universal Auxiliary Outboard Steering System revolutionizes auxiliary steering by offering a universally compatible, easy-to-install solution.Why Choose EZ-Steer? Safety and confidence Better economy, better performance Simplified selection Quick installation Quick Guide (pdf)

Read more less

SilverSteer™ UC128TS V1 Straight Link Arm - PortSpecially designed for high-performance, high-torque applications, the SilverSteer™ UC128TS cylinder is recommended for bass boats, flats boats, and tournament fishing boats. Compatible with competing helms, hoses, and oil, the UC128TS is built to last with a heavy-duty stainless steel cylinder rod, seals, and link assemblies. Simple to install and fits almost every 2- and 4-stroke outboard engine on the market.Features:V1 Straight link arm*Please note: The UC128TS-SVS is a direct replacement for UC128-SVS. UC128TS-SVS has the same cylinder, but it's easier to service.

Read more less

PROTECH 2.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/2 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Kit Contains: UP28 F Front mount helm pump UC128-TS/2 Cylinder Front mount outboard cylinder OIL 15 Hydraulic oil - 2 quarts The wheel is not included

Read more less

Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted WheelFeatures: Replaces existing helm Electronic clutch disengages for manual steering Rotary drive system Fits behind dash Safety override technology Current 1.25A Typical, 5A Peak Wireless control module plus handheld pendant - steering in the palm of your hand Steer, fish and cruise from anywhere on the boat Easy DIY installation - no need for professional installer 2 Year limited warranty - purchase with confidence Specifications:Wireless Controller & Receiver Meets FCC standards Additional Handheld and receiver can be paired in field Pendant and receiver auto-off in 30 minutes if no usage Over 1 Million control codes provide enhanced security Handheld Pendant Water proof Supplied with 2xAAA batteries Includes lanyard Wireless Receiver & Motor Controller Waterproof Motor drive capability up to 25A Overload protection Reverse polarity protection 12V DC nominal (9V min - 16V max operating range) Offers pass-through capability for Autopilot motor and clutch control circuits Specifications: Type: Parts Box Dimensions: 9"H x 9"W x 16"L WT: 15.2 lbs UPC: 628309263386 Brochure (pdf)

Read more less

Motor Well Boot - 3" Split Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Steering Cable Boot Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

UPMD MasterDrive Power Unit1 UPMD Power Unit, 15' (4.5M) wiring harness includedFeatures: 12VDC Motor 45° swiveling fittings for easy installation Semitransparent 0,5 liter (0.11gal) tank gives immediate oil level vision Vented filler plug Suitable for applications with autopilot Bulkhead or floor mount Black galvanized motor case, saltwater resistant 4,5 m (15’) Wiring Harness included IP67 waterproof Ignition protected (SAE J-1171 and UNI EN 28846)

Read more less

UC95OBF-1 Hydraulic Cylinder 175HP or LessIntended for single engine applications of 175 HP and under, the UC95 OBF-1 cylinder is compatible with competing helms, hoses, and oil, and is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies.Features: Balanced the number of turns lock-to-lock is the equal port to starboard or vice-versa Adjustable boss style fittings for easy installation High resistance stainless steel connection bolt (ULTRABOLT)  Constructed of top-grade materials this cylinder is simple to install and fits almost every two and four-stroke outboard engine on the market our engine Split and pinned mounting rod for easy installation and bushings to prevent friction with engine Brochure (pdf)

Read more less

Complete Boss Fitting Typical Application:Bleed fitting for all outboard cylindersSpecifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

Union T-Fitting f/3/8" Tube Compression Hose FittingsUnion T-Fitting for 3/8" TubeTypical Applications: T-Fitting for 3 standard 3/8" compression thread hose fittings Specifications:3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A

Read more less

Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel. Available both in single and dual versions (for either two equal or two different outputs) Both single or dual paddle can be positioned at various angles for the most confortable choice Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version) Max load 5 Amp @ 12VDC For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay Uflex® trim tabs require the use of the KTR - 42860S kit relay Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”) Easy to install on the following Ultraflex® steering systems: - front and tilt mount hydraulic helms- tilt mount mechanical helmsWiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately

Read more less

Boss Style T-Fitting - NickelTypical Application:Fitting for back of helm in a dual station installation Specifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder/Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

Hydraulic Hose Kit 6' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Read more less

Hydraulic Hose Kit 2' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

Read more less

ROTECH™ STEERING SYSTEMROTECH - X08T71FC - helm X34 - 90° bezel M66 - 8' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 8' Box Dimensions: 2"H x 5"W x 5"L WT: 24.6 lbs UPC: 702755019251

Read more less

M66 Fast Connect Rotary Steering Cable - UniversalSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe Morse D290 Ultraflex Year 2001 & Prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR *Length: 8 Feet Specifications: Cable Length (Feet): 8' Box Dimensions: 3"H x 18"W x 28"L WT: 5.3 lbs UPC: 702755017066

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 12 FeetFittings: ORFS Specifications: Cable Length (Feet): 12' Box Dimensions: 5"H x 15"W x 15"L WT: 3 lbs UPC: 702755015901

Read more less

T4 Through Tilt Tube Electro Steer - SaltwaterA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main engine and kicker motor. Controlled by a 24′ cable and two-button handheld remote. Wireless option available.

Read more less

TM87 17' Rack & Pinion Steering SystemFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes: G87 Front Mount Helm TM87XLL High-Efficiency Cable X34 Mounting Bezel Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. No need to drill holes: X34 bezel fits the same bolt pattern as your existing helm. Use your existing steering wheel: 3/4" tapered shaft fits most steering wheels up to 16" (406mm) diameter Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

PROTECH 2.1 Front Mount Tilt OB Hydraulic System - Includes UP28T Helm Pump, Oil, UC128TS-2 Cylinder, & X52 Tilt - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy-duty shaft seals, carbon steel piston, and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss-style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Kit Contains: UP28T helm pump X52 Tilt Mechanism UC128TS Front Mount Outboard Cylinder OIL 15 Hydraulic oil - 2 quarts Kit F (remote fill adapter for rear mount and tilt mount pumps) *Hoses and the wheel are not included

Read more less

Aluminum Inboard Cylinder - 1.25" Bore & 7" StrokeA hydraulic steering system consists of a steering pump, a cylinder tied to the rudder or the outboard or sterndrive engine, and the connecting hoses. Under normal operating conditions, a steering wheel turn will pump the oil, which flows in through the hoses to the cylinder, according to the turn direction.With the consequent cylinder movement, the oil will flow to the pump through the hoses and, at the same time, move the engine or the helm, which are connected to the cylinder. The pumps, equipped with a valve that prevents outgoing fluid from returning along the same hose, allow the operation of the steering systems with two or more steering stations. The cylinders are double-acting and may be balanced or unbalanced. This particular cylinder is a balanced cylinder with the same number of steering wheel turns to move the helm from the center to the end stroke in two opposite directions. A well-balanced steering system needs the correct choice of pump for the cylinder.This hydraulic cylinder for the inboard engine UC 116-I has been designed and manufactured to be used as a component in the hydraulic steering systems. The cylinder with a mobile rod is installed directly to the arm of the helm through the proper ball joint on the end part of the cylinder. On the opposite side, it is fixed directly to the boat through a support with the plate.Features:Balanced (the number of turns lock-to-lock is equal to port to starboard or vice versa)Specifications: Volume: 116 cc - 7 cu.in Torque: 58 kg (5043 lbs.) Output Force: 464 kg (1023 lbs) Owner's Manual (pdf)

Read more less

UP33FM Helm Pump 2.0 Cubic InchesFeatures: Compact design Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection Compatible with Teleflex SeaStar cylinders, hoses and oil 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Convenient front of dash fill Adjustable Boss Fittings compatible with Kit OB and Kit OBSVS hose kits and SeaStar hoses Relief valve pressure: 1000 PSI Specifications: Mounting: Front Mount Displacement/Revolution: 33cc-2.0 cubic inches Number of Pistons: 7 Relief Valve Setting: 70 Bar - 1,000 PSI Maximum Wheel Diameter: 710mm - 28" Weight: 5kg-11lbs

Read more less

T-Fitting Assembly  - ORF HoseTypical Application:Used to replace the boss fitting in new outboard cylinders when trying to connect to 'O' ring face seal hosesSpecifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

Type A Controller f/Boats with an Existing Autopliot No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot Drive When the Intellisteer Wireless Controller is activated it will disconnect the autopilot and provide wireless jog steering control from anywhere on the boat When the Intellisteer Wireless Controller is turned off, the Autopilot will function as before Specifications: Type: Parts Box Dimensions: 3"H x 8"W x 10"L WT: 2 lbs UPC: 628309263355 Brochure (pdf)

Read more less

Hydraulic Steering Fluid - ISO 15 Marine Synthetic Blend - 32 ozDelivers smooth, responsive steering performance under extreme marine conditions. Designed for most outboard and inboard hydraulic steering systems in saltwater and freshwater environments. The synthetic blend with anti-corrosion and anti-wear additives helps protect components and extend system life.Features: Premium Synthetic Blend – Formulated with high-quality synthetic base oils for maximum performance. ISO 15 Viscosity Grade – Optimized for marine hydraulic steering systems requiring ISO 15 fluid. Anti-Corrosion Protection – Shields metal parts from rust and saltwater exposure. Anti-Wear Additives – Reduce friction and wear on seals, pistons, and pumps. Smooth Steering Response – Enhances control and responsiveness in all operating conditions. Compatible with Most Systems – Designed for use in Seastar®, BayStar®, Uflex®, and other hydraulic systems. Saltwater & Freshwater Safe – Resilient formulation performs in all marine environments. 1 Quart (32 oz) Bottle – Convenient size for topping off or full system fluid changes. Leak-Resistant Tip – Easy-pour spout for mess-free application. Trusted Marine Brand – Manufactured by Star brite, a leader in marine performance products. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

UC128 Version 1 Hydraulic CylinderCompatible with competing helms, hoses, and oil, the UC128 cylinder is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies. Constructed of top-grade materials this cylinder is simple to install and fits almost every two and four-stroke outboard engine in the market. Balanced: The number of turns lock-to-lock is equal port to starboard or vice-versa. High resistance stainless steel connection bolt. Volume: 120cc: 7.3 cu. in Output Force: 450 kg - 992 lbs Inside Diameter: 35mm - 1.37" Stroke: 185mm - 7.28" 3/8" (9,5 mm fittings) - For high pressure flex hose Bleed Fittings: DN5 Quick connect

Read more less

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead FittingsTwo high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end. Application:Recommended for use with all Uflex helms with 1500 psi relief valvesSpecification:Hose Length (feet): 6’  Specifications: Cable Length (Feet): 6' Box Dimensions: 5"H x 14"W x 15"L WT: 2.55 lbs UPC: 702755025054

Read more less

M90 Mach Black Rotary Steering Cable - 18'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 18' Box Dimensions: 3"H x 17"W x 28"L WT: 9.2 lbs UPC: 702755052067

Read more less

TM87 10' Rack & Pinion Steering SystemFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes: G87 Front Mount Helm TM87XLL High-Efficiency Cable X34 Mounting Bezel Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. No need to drill holes: X34 bezel fits the same bolt pattern as your existing helm. Use your existing steering wheel: 3/4" tapered shaft fits most steering wheels up to 16" (406mm) diameter Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

HYCO 1.1T Front Mount OB Tilt Steering up to 150HPThe Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged system must be used.Package Kit Includes: 1-UP20T Tilt Helm Pump UC95-OBF/1 Front mount Hydraulic Cylinder 2 quarts of Oil-15 Hydraulic Oil Installation and Instructions manual included *Premade Hose Kit 2' to 30' ft. length is not included and steering wheel not included.Please Note: There are two Cylinders offered, the UC95-OBF/3 model is for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, and 115 HP engines only, and the UC95-OBF/1 is used on all other O/B models.

Read more less

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 CylinderSpecifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering.Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear.SilverSteer™ Package Kit Contains:UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder) Quick Guide (pdf)Brochure (pdf)

Read more less