24V Parallel Kit for 2 24V Batteries to 1 MotorThe Connect-Ease “Double Time” 24V parallel kit allows the combination of two 24-volt lithium batteries for much longer trolling motor runtime. Perfect for serious anglers, guides, professional tournament anglers, or anyone who wants to be on the water for countless, continual hours without any loss of power on a single charge.The charging connection mates with Dakota Lithium, Amped, and other 24V charger connections.Features: Plug-and-play connections are lithium-compatible Parallel 24V batteries for better performance Integrate the onboard charger through pre-wired connections Heat-shrinkable butt splices

Read more less

3 12V Battery Parallel Quick Connect SystemThe Connect-Ease RCE312VRV allows connecting three 12-volt batteries in parallel to increase users' runtime when away from any wired, plug-in power source. The Connect-Ease (3) 12V parallel system was specifically designed with RV and off-grid enthusiasts in mind whose power requirements may also require a “solar” connection. The RCE312VRV is compatible with other solar products, and does provide a direct Heat Shrinkable accessory splice connection that can be used to input to a solar panel; other additional, third-party low amperage accessories can be added.Features: Plug & Play Connections Solar connection designed to recharge all 3 12V batteries. Handles 60 to 240 amps of DC power. Lithium Compatible

Read more less

12V Trolling Motor Connection with ChargingUsers can do this by themselves since this versatile product allows them to connect any 12V trolling motor, MotorGuide, MinnKota, onboard charging systems, or other power needs. Also, this charging connection can be connected to shallow water anchors, sporting clay machines with solar charging, and ATVs with accessory needs. Features: How-to instructions are included Plug-and-play connections lithium-compatible 8-gauge marine-grade wire with heat-shrinkable butt splices Integrated charging leads

Read more less

36V Trolling Motor Separated Battery SystemThis is a 5 ft. extension on the RCE36VB5CHK kit. Designed for boats with two batteries in one compartment and the third in a different compartment.Features: Plug & play connections 8-gauge marine grade wire with 60” separated battery connection for the bass center console and other boats with multiple battery compartments Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible

Read more less

12V Parallel Battery Connection SystemThis 12V parallel battery connection kit creates the perfect parallel connection for use in extended battery power needs, such as 12V trolling motors, ATVs, RVs, ice houses, agricultural equipment, sump pumps, lights, cabins, and anywhere extended 12V power is needed. Also, for boats and other applications needing to create more power for running 12V trolling electronics, live wells, bilge pumps, power poles, and more starting batteries for large outboards, batteries draw power from both batteries and will charge together off the alternator or charger at the same time. If users need more power and voltage to start, using this product, users can run all their electronics, live wells, and bilge pumps off a dual battery setup. This is the product to power a boat for longer days on the water without the worry of draining the main battery, so users will always have the power they need to spend more time on the water. Features: Plug-and-play connections are lithium-compatible Parallel multi-purpose 6-gauge battery connections with an 8-gauge parallel system for powering small trolling motors, wenches, halogen lights, AG equipment, etc. Marine grade components

Read more less

36V Standard Trolling Motor SystemToday’s high-output trolling motors require good power sources. This easy-to-use system is designed for those who take their fishing seriously.Easy battery removal and replacement from tight boating compartments now only takes seconds and no tools are needed.Created for the sportsman who wants to easily connect, replace, or just disconnect their 36-volt marine battery systems from tight boat compartments in seconds. This connection kit keeps trolling motor connections intact, whether the batteries are connected or out of the boat.Connect-Ease's patented system takes the hassle and frustration out of remembering how to connect 36-volt trolling motors with the proper 36-volt series for battery hookups. The product features corrosion-free connections and provides the voltage vital for marine equipment performance and longevity.Once Connect-Ease's products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly by simply snapping the connectors together.Features: Plug & play connections 8-gauge marine-grade wire with heat-shrinkable butt splices Integrate an onboard charger through pre-wired connections Makes rigging and battery removal foolproof Lithium compatible Specifications: UL1426 tinned marine-grade wire One-year warranty Saltwater approved Made in the USA

Read more less

Weedless Wedge™ Props (MKP-7) The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter:   3 - 5 / 8"Prop Nut Kit:        "A" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKR-DSC-15 DSC Transducer Adapter Cable - Lowrance® 8-PINThe adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in dual-spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

MKR-DSC-12 DSC Transducer Adapter Cable - Garmin® 4-PINThe adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

lil' Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hp Locks "down" for trolling, "up" for cruising Made of highest quality polycarbonates with stainless steel hardware Owner's Manual (pdf)

Read more less

Weedless Wedge™ Props (MKP-6) The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter:   3 - 1 / 4"Prop Nut Kit:        "A" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

MKR-MI-1 Adapter Cable for Helix 8,9,10 & 12 MSI Units MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 8, 9, 10 or 12 fish finder with a built-in MEGA Side or Down Imaging transducer on your trolling motor. Features: Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX Adapter not required for SOLIX models

Read more less

i-PILOT LINK REMOTE HOLDING CRADLE - BLUETOOTHSecure i-Pilot Link remote to your belt or console with this versatile cradle. Use the belt clip for constant easy access, or remove the belt clip and mount i-Pilot Link cradle to your dash for simple, straightforward operation.Compatible only with Bluetooth-enabled i-Pilot Link remotes.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

G-Force SILENCER Trolling Motor Vibration Pad - BlackThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features: Extends life of trolling motor Reduces noise and vibration Eliminates metal-to-metal contact Prevents harsh clanking when stowing trolling motor Package will contain product for Motorguide and Minn Kota WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

Trolling Motor Foot TrayFish in comfort and streamline your deck! Reduce back and foot pain and fish all day with the Panther Recessed Foot-Control Tray. The tray mounts flush to your boat and levels out the foot pedal while you fish. This unit adds a clean look to your deck and easily fits all Minn Kota and MotorGuide foot-control trolling motors. Easy installation and maintenance free. Features: Forward taper design makes the foot pedal level and drains water faster; Water flows through a 3/8" ID x 8' flexible vinyl tube Constructed of high-impact, UV-resistant, high-density polyethylene Color-molded throughout, no paint to chip or fade Installs easily in any brand boat, and includes installation instructions, cutting template, drain tube, and hardware Fits all Minn Kota and MotorGuide foot-control trolling motors

Read more less

Trolling Motor Tie-DownJust as we've taken retractable tie-downs to a whole new level,we're making standard rod hold-downs a thing of the past.We've added two great new "PLUS" features to this line of hook and loop hold-down products. SUR-Grip release handle allows for a comfortable,secure hold Rubber Grommets for maximum protection mounting screws countersink into rubber grommets,keeping metal hardware away from equipment.

Read more less

Trolling Motor Saver Set for Deep V BoatsSpecially designed for deep "V" boats with extra long trolling motor shafts.  Designed with two straps,  the longer strap is mounted where the trolling motor shaft fastens to the mounting bracket and can mount 24" above the deck.  The second strap is designed to hold down the actual motor.  It wraps around the entire mounting bracket, and the trolling motor shaft, helping to keep the motor from bouncing when traveling down the lake.  Keep your trolling motor tied down securely and undamaged for longer life. Adjustable 9" to 24".

Read more less

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G-Force SILENCER Trolling Motor Vibration Pad - RedThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features: Extends life of trolling motor Reduces noise and vibration Eliminates metal-to-metal contact Prevents harsh clanking when stowing trolling motor Package will contain product for Motorguide and Minn Kota WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less