Small Swingback Boat Seat Cover - Rip/Stop Polyester NavyKeep your seats and consoles from cracking and fading! Boat seat and console covers are designed to protect your seats from damaging ultra-violet rays, wind, mildew and water. 600 denier Rip/Stop Polyester with polyurethane coating. All Covers fold easily for storage and keep your seats cool and clean!Dimensions: 36"H x 36"W x 20"D Features: Breathable Mildew and water resistant UV Protection Heavy duty Polyureathane coating Air vents Specifications: Color: Blue Cover Type: Seat Box Dimensions: 4"H x 10"W x 14"L WT: 3.1 lbs UPC: 040011090294

Read more less

TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips 2-connector kit Safe and easy Semi-gloss finish

Read more less

Chesapeake White SS 2" Depth Sounder with Thru-Hull TransducerPerimeter-lighted black dial with stylish Blue and White graphics, polished stainless steel bezel, and domed glass lens.The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.  Depth Sounder includes a Faria SN2060 thru-hull mount transducer w/26' cable.2" - Hole Size: 2.0625" (53mm)Specifications: Imperial and Metric Values Domed Glass Anti-fog, Scratch Resistant Lens Programmable Keel Offest  Stainless Steel Bezel 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Factory P/N DS0110*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Type: Depth Sounder Voltage - Input Range (Volts): 12/24 V Series: Chesapeake White Gauge Size: 2" Box Dimensions: 8"H x 8"W x 9"L WT: 2.1 lbs UPC: 759266138940 Owner's Manual (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1321- 3-Blade - 13.25" x 21 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-1/4" Material: Aluminum Pitch: 21 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 5.8 lbs UPC: 652480102318 Quick Guide (pdf)Brochure (pdf)

Read more less

Lund Style High-Back Fishing Seat - Grey/CharcoalThis high-back fishing seat mounts on any pedestal or mounting surface with a 5-1/4" hole pattern.Features: High-impact marine-grade plastic frames OEM-grade, powder-coated "No-pinch" hinges Compression foam padding 28 oz. Marine-grade vinyl Mildew-resistant and UV-treated  Mounting screws included Specifications: Dimensions: Height 22.5", width 17", depth 19.75" Seating Depth: 16" Seat Color: Grey/Charcoal

Read more less

16oz Stainless Steel CleanerThis is a phosphoric acid-based stainless steel cleaner. Features: It removes rust staining and surface corrosion from polished marine-grade stainless steel  Shelf Life at 23 degrees Celsius is 24 months  Specifications: pH Value: 1.0 Size: 16oz bottle Contents: Contains non-ionic surfactants < 5%  Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used Recommended UseUsed for cleaning rust staining and surface corrosion from polished marine-grade stainless steel.Surface PreparationApply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge.Pre-treatmentClean with detergent.StorageThis product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Quick Guide (pdf)

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - GraphiteThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Graphite can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

VR-140 PRO Mirror - BlackThe 6″ x 20″ VR-140 PRO offers unparalleled viewable range and clarity via prescription-grade optics.  For the first time ever, the boat driver can follow a skier (or wakeboarder, tuber, wake surfer, etc.) from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The premium mirror is housed in UV-resistant engineered polymer.  The spherical-tension socket provides infinite positioning for superior stability in the roughest waters.Click Here to Find Your Mirror Bracket Bracket sold separate.*Does not include cover*Sold as an Individual

Read more less

Drop-In Hidden Horn V.3 with Grills Drop-In Hidden Horn V.3 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet screw-in grill. Hole size 2-3/4” diameter. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577066.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 9"W x 15"L WT: 0.85 lbs UPC: 035514432078

Read more less

Heavy Duty Oxidation Remover16ozRemoves moderate oxidation, scratches, stains and tough water spots on all fiberglass gel coat marine or RV surfaces. Restores color by effectively removing surface degradation.Benefits Effortless application and wipe-off in full sun Product can be safely applied with a Dual Action Polisher Product can be applied by hand High Speed Rotary Non-Scratch Brings back to like-new condition VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 9"L WT: 1.3 lbs UPC: 070382149161

Read more less

World's Best Rope Handle Bucket - 3.5 Gallon - WhiteForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: White&nbsp; Size: 3.5-gallon bucket Dimensions (inch): 10.75" H x 12" W

Read more less

Mercury Bravo 2-3 Anode KitContents: (1) 00815MG (1) 00820MG (2) 00818MG Material: MagnesiumPackaging: PolybagHardware: Included Specifications: Material: Magnesium Box Dimensions: 3"H x 7"W x 8"L WT: 1.3 lbs UPC: 8059617819392 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - BlackSikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.Uses:General all-purpose, high strength marine sealant, which may be used for light duty bonding with long open time capability for humid climates or jobs requiring more time that remain permanently elastic.Characteristics & Advantages: Use above and below water line Resists salt water Paintable and sandable Excellent bond NSF approved for potable water USDA approved for incidental food contact WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Sikaflex® 295 UV - White - 10oz Tube with NozzleExterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of ApplicationSikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application:Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.Tooling & FinishingTooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.OverpaintingSikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Read more less

Perfect Pole - 5' to 9' ExtensionThe strongest, easiest-to-use cleaning extension poles on the market today.Patented Insta-just internal tracking system, with the exclusive Uni-Snap quick release mechanism, makes extending and collapsing the Perfect Pole quick and fool proof, eliminating frustrating alignment problems.  The button will pop up in the next hole, every time.  Changing accessories is a snap!Ideal for RV's and boats of all sizes.Features: Telescopes from 5' to 9'  No-look tracking system for foolproof adjustments   Teardop design makes Perfect Pole up to 67% stronger than other telescoping handles Comfortable hand grip  Designed to work with Swobbit System Uni-Snap quick release accessories *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 66"L WT: 2.3 lbs UPC: 633590456607 Brochure (pdf)

Read more less

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Read more less

Horizontal Mount Enclosure with Additional 5' Feeder HoseFor installing a washdown hose on our boat, home or spaHoseCoil's Horizontal Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 5' HoseCoil constructed of high performance polyether material. HoseCoil features solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection.The Horizontal Mount Enclosure can be used to plumbed directly into your existing pressurized water system or raw water washdown pump. Included is a 5' feeder hose for direct connection to an external water spigot. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 11"W x 23"L WT: 4.5 lbs UPC: 659988116823

Read more less

Aktivator-205 Clear 250ml BottleSika® Aktivator-205 is a solvent-based colorless clear adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-205 is designed for the treatment of bond faces prior to the application of Sikaflex® and Sikasil® adhesives and sealants.   Features: Enhanced adhesion on various substrates Short flash-off time Easy to use Transparent Areas of Application:Sika® Aktivator-205 is used to improve adhesion on non-porous substrates such as metals, plastics, ceramic screen prints, and painted surfaces. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-205 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Read more less

30A 125V Power Inlet303SSEL-BProduct Features Solid cast 316 stainless steel Locking waterproof cap Easy Lock System Soft Touch cap stays open in the upright position 8-way right angle rear safety enclosure WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Box Dimensions: 4"H x 6"W x 9"L WT: 1.25 lbs UPC: 093344300172 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Part Number 1363901 Riptide Terrova® QUEST™ 90/115 Trolling Motor with Wireless Remote - 24/36V - 90/115LBS - 72" Riptide Terrova is the hardest working firstmate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term "day off". With available shaft lengths up to 100", Riptide Terrova comes ready to go where other trolling motors won't. The QUEST series of dual 24/36 volt brushless trolling motors were designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before. QUEST Series These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors, and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come. Stow/Deploy Lever Press this lever on the mount, and fall-away ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Auto Park helps the motor stow effortlessly by orienting the lower unit to the perfect stow position automatically. Advanced GPS Trolling System The most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote. Part of the One-Boat Network Out of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated set-up procedures. Spot-Lock with Jog Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction.  Drift Mode automatically engages speed and course control simultaneously, meaning anglers no longer need to depend on drift socks, kicker motors, or manual operation to control speed over water – even in the heaviest wind and current. Real-time Battery Monitoring Check battery power levels while the motor is in use, real-time "time until empty" display monitor, with a notification when battery power is reduced to 20% to prompt users to enter "Eco-mode" which can reduce current draw to extend battery life. Digital Maximizer™ Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing. Indestructible Composite Shaft — Guaranteed for Life At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life. Mobile App Compatibility Control your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software. Specifications: For Use In: Saltwater Shaft Length: 72" Voltage: 24/36 One-Boat Network Compatible: Yes QUEST Series: Yes Spot-Lock: Yes Foot Pedal Style: Not included Control: Wireless remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 58 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Power Prop (MKP-40) Warranty: Two-year warranty   Specifications: Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-40 Mounting Style: Bow Salt Water/Fresh Water: Salt Series: Riptide Terrova Shaft Length (Inches): 72" Thrust (Pounds): 90/115 lbs Voltage - Input Range (Volts): 24v or 36v Box Dimensions: 15"H x 19"W x 89"L WT: 102 lbs UPC: 029402050918 Owner's Manual (pdf)

Read more less

Toilet Tissue Rack Spring-loaded bar 1-7/8"H x 5-1/2"W x 3-3/4"D

Read more less

Fuel Stabilizer - 1 GallonAMERICA’S #1 FUEL STABILIZER TREATMENTSTA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.USAGE DIRECTIONS:Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc.PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 5"H x 7"W x 11"L WT: 7.15 lbs UPC: 073905222136

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (1-1/16" – 1-1/2") Clamping Range - 10-Pack - SAE Size 16Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 16 Hose Inner Diameter: (inch) 7/8" – 1" Clamping Range: (inch) (1-1/16") – (1-1/2") / (mm) 26-38 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

Teak Brite® Advanced Formula Teak Oil - 32ozMost advanced teak oil and sealer available. Will deliver long lasting protection even in tropical climates. Penetrates deep into wood (dry wood only) to feed and protect finish. Compatible with Life-Calk® seam compounds. (Hint: for a fantastic finish, allow teak to dry for at least 24 hours minimum before applying oil). Specifications: Type: Teak Box Dimensions: 3"H x 5"W x 7"L WT: 2.1 lbs UPC: 020537011881

Read more less

Bucket Seat/LidFeatures: Contoured, durable and soft lid for seating Protects bucket contents from weather Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 12"W x 12"L WT: 0.9 lbs UPC: 703485121092

Read more less

#47 Hard Water Spot Remover - 16ozThick, low-drip formula remains on vertical surfaces for easy cleaning. New technology chemically embraces and lifts mineral deposits and protects the surface from future water spots. Easy to apply and easy to wipe off.Benefits: Cleans surface dirt and grime Effortless application and wipe-off in full sun The product can be applied by hand It brings it back to like-new condition VOC Compliant Specifications: Type: Hard Water Box Dimensions: 2"H x 4"W x 11"L WT: 1.2 lbs UPC: 070382147167

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Marine Fabric Guard - 32oz303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics.  Resist water, even when you’re on the water.  303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more.  When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.Features: Fabric protector spray that strengthens and restores lost water repellency for marine fabrics Safe for synthetic and natural fibers in marine environments Protects against both water-based and oil-based stains Does not alter fabric color, feel, flammability or breathability Recommended by leading outdoor fabric manufacturer Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fabric & upholstery Box Dimensions: 3"H x 5"W x 12"L WT: 1.8 lbs UPC: 082043006508

Read more less

One Box Indication Unit for BOLT Electric SystemAn attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster, and correct listing. Features: Convenient “All Up” and “All Down” buttons Trim tab position LEDs always show you where your tabs are Auto tab retraction (tabs retract up when the ignition is powered off) Easy-to-install single lock nut design Backed by Bennett’s outstanding customer support This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Vinyl Coat™ - Sea Ray Mystic White - 12ozMarine Vinyl Coat is a line of flexible aerosol coatings to match, restore or change the color of most marine vinyl and plastic surfaces. Features: Covers stains, fading and prepped mildew Superior adhesion Outstanding UV protection  Stays flexible, will not crack Excellent hiding  Quick drying Applications: Vinyl Plastic marine surfaces Quick Guide (pdf)Brochure (pdf)

Read more less

Dockside 30A to 15A Adapter with GFI Provides safer hook-up to 30A dockside power Provides protection against harmful electric shock Reduces the possibility of fire Offers protection for up to 3 attached tools Corrosion resistant and rain-proof rated for outdoor use GFI trip level of 4-6 mA WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 8"W x 15"L WT: 2.1 lbs UPC: 093344312311

Read more less

Marine Clear Vinyl Protective Cleaner - 32oz303 Clear Vinyl Protective Cleaner offers superior protection against the harmful effects of UV rays.  This product is all you need to safely clean and protect against yellowing and cracking of vinyl, clear vinyl, Strataglass and Eisenglass boat windows, leaving a non-streaking finish.Features: Safely cleans and protects against yellowing and cracking of vinyl and clear vinyl Safe for use on vinyl windows like Strataglass™ and Eisenglass Leaves a non-streak finish with no left behind residue Provides superior UV protection Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Vinyl & Rubber Box Dimensions: 3"H x 5"W x 12"L WT: 2.25 lbs UPC: 082043302150

Read more less

Taper-Lock™ Hi-Lo Bushing for 2-3/8" PostHigh-Strength Composite Bushing Inserts Into End Of Post For Hi-Lo Seat Swivel Mount.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mini Compact Twin Horn - 12V Features: 304 Stainless Steel Trumpets, Diaphragm, and Mounting Brackets Meets ABYCA-23 for boats up to 12 meters Pre-wired Fits existing hole patterns Much louder than competitive models Specifications: Dimensions: 3"L, 8"W, 1-3/4"H (7.5 x 20.5 x 4.5 cm) Max Amp Draw: 6 Amps Rating: 112 db@ 1 Meter Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 3"H x 5"W x 12"L WT: 1.55 lbs UPC: 768170100011

Read more less

Transom Door Latch Handle - Catch Plate IncludedIdeal for one handed operation of Transom Doors. 316 SS Hand Buffed and Electro-Polished. Includes Handle and Catch Plate.Specifications:  Weight 2.8 lbs (1.27kg) Length 9-5/8" (244mm) Height 2-3/4" (70mm)   Base Plate 4-1/2" (114mm) x 3-1/2" (89mm) Uses (4) 1/4" Flat Head Fasteners

Read more less

Lexan cover protects electrohydraulic unit from occasional wash down. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MKR-19 60A Waterproof Circuit Breaker Protects trolling motor from electrical damage. Features: 60 amp rating with manual reset  Fully waterproof  Compatible with all 12, 24, and 36-volt systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Diesel Formula Fuel Stabilizer & Performance Improver - 32ozSTA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer – Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.BOTTLE DIRECTIONS:To measure small quantities of this diesel fuel additive: remove small cap and seal (on long neck) squeeze bottle to desired level, and pour. To measure large quantities of fuel treatment: remove large cap and seal, pour (measurements on bottle side).USAGE DIRECTIONS:For in-season use: 1 oz. (30mL) treats up to 10 gallons (38L) of fuel. For storage: Use 1 oz. (30mL) to 5 gallons (19L).  DO NOT OVERTREAT. Diesel Formula STA-BIL® is recommended for use AT EVERY FILL UP for year round protection. Product does not contain alcohol.Features: Diesel fuel additive that prevents sludge and sediment formation Clean & lubricate entire fuel system Protect against corrosion with specially formulated diesel fuel STA-BILizers Reduces oxidation of diesel fuel caused by thermal breakdown Removes water Compatible with all ULSD & biodiesel blends Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 5"W x 11"L WT: 2.05 lbs UPC: 073905222549

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 5.91 Box Dimensions: 5"H x 16"W x 21"L WT: 3.4 lbs UPC: 5060114797680 Quick Guide (pdf)

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - SeagrassThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Seagrass can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Quik Dry MopDesigned to quickly remove water from decks, fiberglass and painted finishes leaving them dry and streak-free. Material is not affected by mold, mildew, soaps or chemicals and is more durable than PVA. Protective end cap prevents damage to decks, paint and fiberglass.  Stores in a reusable pouch so your mop is ready to use when you need it. Mops are recommended for drying, not cleaning or scrubbing.Features: Made from super absorbent reinforced, proprietary material  Die cut 1" wide strips. 67% more absorbent than felt or latex coated mops  Absorbs over 5 times its weight in liquids *Sold as an Individual  Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 7"W x 20"L WT: 0.7 lbs UPC: 633590312156 Brochure (pdf)

Read more less

30A 125V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)30A, 125V capacities; 25' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cordset Length: 25' Amperage: 30a Voltage: 125v Box Dimensions: 6"H x 11"W x 13"L WT: 10 lbs UPC: 093344051654 Owner's Manual (pdf)

Read more less

Automobile Tonneau Cover & Convertible Top Cleaner - 16oz303 Tonneau Cover and Convertible Top Cleaner is specially formulated to clean and brighten Tonneau covers, fabric and vinyl convertible tops and car bras.  Recommend to use prior to treating with 303 Fabric guard or Protectant.Features: Safely cleans and brightens both hard and soft tops Great for use on Tonneau Covers, fabric & vinyl convertible tops and car bras Rinses residue free Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: misc Box Dimensions: 2"H x 4"W x 11"L WT: 1.2 lbs UPC: 082043305717

Read more less

Hydraulic Power UnitA compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Self Levelling Radar Mount - MastCompatible Units: Garmin GMR18/GMR18HD/GMR24HD Raymarine RD218/RD424 Lowrance 3G Broadband Simrad 3G Broadband Simrad DX45/DX60 The Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in the heel angle of the boat whilst eliminating all small oscillations.Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance-free Passive system - no power required Reduced weight aloft - complete system weighs only 3.4 kg Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722 Attached to the mast by four swivel feet - matches the profile of any mast 12 point fixing - highest quality Monel rivets Compact mount - radar extends only minimum distance from front of mast Materials: Finest quality machined and anodised aluminium mast adapter Marine grade 316 stainless steel cradle and base plate Kit Includes: 1 x Levelling mount 1 x Mast Adapter 1 x Complete fastening pack Specifications: Construction: Stainless Steel Type: Self Leveling Box Dimensions: 6"H x 16"W x 16"L WT: 10 lbs UPC: 5060114791152

Read more less

Hydraulic Actuator with Sensor for TPI or NMEABennett Hydraulic Actuator with sensor.Specifications:For TPI or NMEAWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BOLT 12x16 Heavy Duty Trim Tab SystemDesigned for rougher conditions and higher speeds, the BOLT1216HD (12” span x 16 chord”) heavy-duty electric trim tab system features an adjustable upper hinge actuator and requires less than 10.25” of vertical transom height. The high-performance laser-cut, tapered trim tabs are manufactured with extremely durable 12-gauge, electro-polished stainless steel, featuring a full-profile backing plate, and up-fins for added strength.Control sold separately This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Actuator Type: Electro-Mechanical Box Dimensions: 6"H x 20"W x 32"L WT: 35.1 lbs UPC: 666285600344

Read more less

Mast MountsCompatible Units: Raymarine: 2kW Radome Fantom 24 GMR24HD / 24xHD Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 21"L WT: 4.85 lbs UPC: 5060114790063 Quick Guide (pdf)

Read more less