Replacement interior for 303SSEL-B, 303SSI-B, and 301 EL-B power inlets.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Box Dimensions: 3"H x 4"W x 7"L WT: 0.3 lbs UPC: 093344005800 Quick Guide (pdf)Brochure (pdf)

Read more less

Features Equipped with covers and sealing collars, for use in wet locations Male Connector: 30A 125V Locking, attaches to dockside receptacle or cordset Female Connector: 2-30A 125V Locking w/ Sealing Collar System, attaches to cordset or boat inlet 5 Year Warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 5 lbs UPC: 093344011405 Quick Guide (pdf)Brochure (pdf)

Read more less

2.75" x 40 Yards - 400 Grit Ceramic Sandpaper - 1 RollSEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Ceramic grain Easy to tear to size C-weight paper Quick Guide (pdf)Brochure (pdf)

Read more less

MD32-1F Steering SystemThe Uflex Front Mount Helm Single Cylinder Outboard MasterDrive™ Steering System eliminates torque at the steering wheel. Three different selectable power levels give the boater the desired feeling on the wheel. Automatically reverts to manual mode in case of power loss. The system always running permits immediate access to control in any sea conditions.Features: Equipped with safety switch ON/OFF, smart button It can be used on dual-station installations High efficiency Low AMP draw Suitable for use with autopilot Low noise Voltage: 12VDC  CE marked in conformity with ABYC P21, ISO 10592 safety standards  Ignition protected (SAE J-1171 and UNI EN 28846) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MD32T with Tilt MasterDrive Retrofit Kit Steering SystemFeatures: Eliminates torque at the steering wheel Three different selectable levels of power give the boater the desired feeling on the wheel Automatically reverts to manual mode in case of power loss High efficiency, low Amp draw  The system always running permits immediate control in any sea conditions Equipped with safety switch ON/OFF (SMART BUTTON)  Can be used on dual station installations Suitable for use with autopilot  Low noise  Voltage: 12VDC  CE marked in conformity with ABYC P21, ISO 10592 safety standards  Ignition protected (SAE J-1171 and UNI EN 28846) Package Includes 1 UH Master Helm Pump 1 UPMD Power Unit (15’ wiring harness included) 1 UCMD User Interface 1 UH32-T-X66 MasterDrive 32cc tilt mount helm with tilt mechanism for power steering. 4 quarts OIL 15 Hydraulic oil 1 Installation manual and fittings This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

EEL "Y" AdaptersThese adapters are equipped with sealing collars and are for use in wet locations.Boat SideFemale Connector: Attaches to boat inlet or cordset(2)50A-125/250V Locking w/ Sealing Collar SystemDock SideMale Plug: Attaches to dockside receptacle or cordset(1)50A-125/250V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 8.5 lbs UPC: 093344051876 Owner's Manual (pdf)

Read more less

Talon 3-Piece Jackplate BracketFeatures: Design allows for better fit with Evinrude G2 outboard motor Compatible with jack plate setbacks down to 4" Compatible with most jack plate designs Anodized aluminum finish

Read more less

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height 4″ pedestal with 12″ round base, 316 electro-polished stainless steel 28″ round footrest, and black powder-coated 5-legged deck base. Overall height 25-1/2″.

Read more less

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electro-polished stainless steel half-round footrest, and black powder-coated 5-legged deck base. Pedestal adjusts 13-1/2″ to 19″. Overall height 20″ to 27″.

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX-1415 - 3-Blade - 15" x 15 PitchUtilizing almost 40 years of race boat and high performance prop design expertise, the Express Mach3 series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason!Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's New Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Pitch: 15 Material: Stainless Steel Diameter (Inches): 14-1/2" Box Dimensions: 8"H x 16"W x 17"L WT: 15.8 lbs UPC: 652480207099 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1321-4 - 4-Blade - 13" x 21 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13" Material: Aluminum Pitch: 21 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6.15 lbs UPC: 652480206733 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1319-4 - 4-Blade - 13" x 19 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13" Material: Aluminum Pitch: 19 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6 lbs UPC: 652480102523 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1315- 3-Blade - 13.75" x 15 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-3/4" Material: Aluminum Pitch: 15 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6.2 lbs UPC: 652480102288 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE-1419- 3-Blade - 14.25" x 19 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 14-1/4" Material: Aluminum Pitch: 19 Rotation: Right Box Dimensions: 7"H x 14"W x 16"L WT: 7.1 lbs UPC: 652480101861 Quick Guide (pdf)Brochure (pdf)

Read more less

Sun-DURA® 40-70 HP Universal Motor Cover - 25"L x 18"H x 15"W - GreyUniversal Motor Covers are a great option if you are upgrading your motor or simply need a replacement motor cover. Each motor cover has 1/4″ draw rope sewn into the hem for easy installation and snug fit.Sun-DURA®Excellent Quality100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty) Specifications: Color: Grey Cover Type: Motor Box Dimensions: 4"H x 4"W x 8"L WT: 1.5 lbs UPC: 194092564318

Read more less

Synthetic Gear Oil IOS 220 - 1qtSuper Lube® Synthetic Gear Oil is a clean, translucent oil with superior anti-wear and extreme pressure properties, suitable for lubricating: Spur, Helical, Herringbone, Rack and Pinion, Straight and Spiral Bevel, and Worm Gears. Excellent oxidation resistance, rust and corrosion protection and the ability to readily separate from water, make it ideally suited for Chain Drives, Worm Gears and Gear Boxes.Features:Super Lube® Synthetic Gear Oil is available in ISO 150, 220, 320, 460 and 680 viscosities. It has a temperature range of -40°F to 450°F (-40°C to 232°C). This product is dielectric, food grade, clean and environmentally friendly.Super Lube® Synthetic Gear Oil is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Synthetic Gear Oil is Kosher Certified.

Read more less

Smart Tab Trim Tabs 7" x 8" for 10'-12' Boats with 8-18 HPIf these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self-adjust and perform better for less money?The breakthrough technology in trim tabs is completely automatic, requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33% Faster Acceleration Increase top speed Provide a level, more comfortable ride at lower speeds Improve fuel economy, handling, and safety NO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).SPEED REGULATEDNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance. It will reduce the minimum planning speed by 33%Provide a level, more comfortable ride at lower speedsImprove economy, handling and safety.As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.INSTALLATION IS SIMPLEWith an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.*All mounting hardware, instructions, and templates are included.*SMART TABS require NO THROUGH HULL DRILLINGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Hydraulic Construction: Stainless Steel Box Dimensions: 5"H x 9"W x 12"L WT: 3.45 lbs UPC: 698690780212

Read more less

SX 9.5" x 10" Smart Tabs 13'-15' Boats with 30lb Actuators - 30-40HP - Gunmetal GreyThe SX series incorporates all the fully automatic features of the popular Smart Tabs, in addition to the rust- and corrosion-resistant benefits of molded composite materials. Assembly can be completed in seconds, and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. Smart Tabs SX offers unparalleled performance and durability with no maintenance required in either fresh or saltwater. The system can be specifically tuned to maximize the performance of any powerboat, and Tracking Ribs have been added to improve handling at higher speeds.Smart Tabs are a one-of-a-kind trim and stabilizer system that automatically adjusts to the sea conditions, without the need for expensive electric or hydraulic hardware and switches. The system constantly reacts to the water conditions, boat speed, and balance, providing a remarkable improvement on any boat.Performance Benefits: Smoother and Faster Acceleration - Great for Skiing 40% less Bow Rise and 35% Lower On Plane Speed - Great for Tubing More Top Speed and No Porpoising or Chine Walking Improves Handling and Smoother Ride In Any Water Improved Fuel Economy (11% +) Assembly & Installation In Minutes: Complete assembly and mounting require only a drill, a 3/16" bit, and a Phillips screwdriver The Integral design eliminates the need for wrenches All components "lock" together with self-locking clevis pins This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Hydraulic Construction: Composite Box Dimensions: 4"H x 11"W x 13"L WT: 3.4 lbs UPC: 698690951438

Read more less

Smart Tab Trim Tabs 12" X 9" for 12'-18' Boats with 60-150 HPIf these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self-adjust and perform better for less money?The breakthrough technology in trim tabs is completely automatic, requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33% Faster Acceleration Increase top speed Provide a level, more comfortable ride at lower speeds Improve fuel economy, handling, and safety NO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).SPEED REGULATEDNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance. It will reduce the minimum planning speed by 33%Provide a level, more comfortable ride at lower speedsImprove economy, handling and safety.As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.INSTALLATION IS SIMPLEWith an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.*All mounting hardware, instructions, and templates are included.*SMART TABS require NO THROUGH HULL DRILLINGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Hydraulic Construction: Stainless Steel Box Dimensions: 5"H x 9"W x 12"L WT: 5.95 lbs UPC: 698690129165

Read more less

HydroPlane 8" x 7.5" Plates - PairThe HydroPlane system features dynamic hinge technology that reacts to water pressure and boat speed to produce a smoother ride and better handling.  Thermo-molded composite construction provides superior strength and resilience in any water conditions. The autonomous trim plates become an extension of the boat’s running surface and require no external activation. For overall stability, faster time to plane, and elimination of common problems like porpoising and chine walking, HydroPlane provides the port-to-starboard balance that hydrofoils cannot.Features: No maintenance  No pilot interface Faster time to plane Uses hydrodynamic lift Up to 50% more effective than Hydrofoils Creates balance Reduces fuel consumption Technical Specifications: Trim Tab Size (L x W) - 7.5" x 8.25"  Boat Length - Under 16'  Trim Tab Material - Polypropylene with Glass Fill  In the Box: Two (2) plates/tabs Mounting hardware Instruction manual  *Sold as a PairThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Polypropylene Box Dimensions: 3"H x 10"W x 10"L WT: 1.55 lbs UPC: 698690807506

Read more less

Smart Tab SX Composite Trim Tabs 9.5” x 10” for 15'-18‘ Boat with 60 - 135HP - BlackIf these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self-adjust and perform better for less money?The SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion-free benefits of molded composite materials. Assembly can be completed in seconds, and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. SMART TABS SX provide unequaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and TRACKING RIBS have been added to improve handling at higher speeds.Our breakthrough technology in trim tabs is completely automatic, requiring no operator adjustment while underway. Nauticus trim tabs self-adjust according to how you load and maneuver your boat.The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33% Faster Acceleration Increase top speed Provide a level, more comfortable ride at lower speeds Improve fuel economy, handling, and safety NO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic, requiring no operator adjustment while underway.The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.SPEED REGULATIONNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.It will reduce the minimum planning speed by 33%Provide a level, more comfortable ride at lower speedsImprove economy, handling and safetyAs the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.INSTALLATION IS SIMPLEWith an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.*All mounting hardware, instructions, and templates are included.*SMART TABS require NO THROUGH HULL DRILLINGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Hydraulic Construction: Composite Box Dimensions: 5"H x 11"W x 13"L WT: 3.4 lbs UPC: 698690951063

Read more less

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 3.9 lbs UPC: 015568089824 Quick Guide (pdf)

Read more less

Original Penetrant - Aerosol - 13oz Can - Aerokroil Formula with SprayTech™ *Case of 12Loosen frozen metal parts the professional way, with Aerokroil with SprayTech™. Industrial-Strength penetrant dispenses every drop, from any angle – even upside down.The Penetrating Oil Used By ProsWhen freeing corroded items in tough spaces, nothing rivals powerful, industry-proven Kroil penetrating oil. Used and trusted by pros and experienced DIYers alike since 1939, Kroil quickly loosens rusted nuts and bolts and frees frozen shafts, pulleys, and more. No space is too tight to reach, thanks to Kroil’s ability to penetrate the smallest opening, thread, or crevice. Corrosion meets its match, as Kroil helps remove and prevent rust, cleans and lubricates, and displaces moisture. NSF Nonfood Compounds Program Listed Category Code: H2 Registration #165745 (8oz and gallons). 50-State VOC Compliant. Made in the U.S.A. (Portions of packaging imported.)Features: Attacks corrosion Helps to remove rust and carbon deposits Fast action Works everywhere Simplifies repairs Penetrates deeply

Read more less

Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" RailsFeatures: Applications: Designed for (1) Standard Instrument Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you Rail Mounted Universal Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") Fit your display onto standard and curved rails Great Viewing Options Viewing angle can be set upon installation Cables are routed internally through the clamp and onto the rail Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time Supplied pre-cut with a 91mm diameter hole to accept all major brands of standard sized instrument heads Specifications: Cut/Uncut: Cut Mounting Style: Rail Usable Face: 4.6"W x 4.6"H Box Dimensions: 5"H x 5"W x 5"L WT: 1.1 lbs UPC: 5060114794382

Read more less

Original Penetrant - Aerosol - 13oz Can - Aerokroil Formula with SprayTech™Loosen frozen metal parts the professional way, with Aerokroil with SprayTech™. Industrial-Strength penetrant dispenses every drop, from any angle – even upside down.The Penetrating Oil Used By ProsWhen freeing corroded items in tough spaces, nothing rivals powerful, industry-proven Kroil penetrating oil. Used and trusted by pros and experienced DIYers alike since 1939, Kroil quickly loosens rusted nuts and bolts and frees frozen shafts, pulleys, and more. No space is too tight to reach, thanks to Kroil’s ability to penetrate the smallest opening, thread, or crevice. Corrosion meets its match, as Kroil helps remove and prevent rust, cleans and lubricates, and displaces moisture. NSF Nonfood Compounds Program Listed Category Code: H2 Registration #165745 (8oz and gallons). 50-State VOC Compliant. Made in the U.S.A. (Portions of packaging imported.)Features: Attacks corrosion Helps to remove rust and carbon deposits Fast action Works everywhere Simplifies repairs Penetrates deeply

Read more less

Rupp Control Knob Silver For Morse Controls (3/8-24 Thread)Elegance at your fingertips with these beautiful knobs for Morse controls. Anodized aluminum in silver adds that special touch of class to any boat. Also available in gold. For throttle or shift. Sold individually.

Read more less

PROTEC Top Coat - 100ml (3.2oz)DiTEC PROTEC Top Coat is a professional-grade two-step (when paired with Base Coat) resin coating for boats and cars. PROTEC Base and Top Coat offers flexibility that isn’t found in other coatings; it won’t crack and flexes with your paint or gelcoat. Its unique, cutting-edge formula delivers strong protection, long-lasting shine, and excellent hydrophobic performance. Cuts cleaning time by up to 50%. Perfect for marine and automotive surfaces of any size. (Top Coat needs to be used in conjunction with Base Coat).Performance/Protection: Provides 12-24 months of protection on paint/gelcoat, depending on climate and environmental conditions. The time frame between recoating can be supplemented with the use of PROTEC Shampoo (every 30 days) or PROTEC Quick Coating (every 90 days), depending on the method you choose. Creates a strong protective shield with great hydrophobic properties Offers top-tier protection against oxidation, UV-light, dirt, grime, exhaust build-up, and other contaminants for multiple seasons Makes maintenance much easier, reducing cleaning time by 50% Coverage: 3.2 oz (100 ml) will cover a 30-40 ft. boat. Appearance: Clear colorless Solubility: 100% in water pH: N/A Specifications: Professional Grade Coating Top Coat Size: 100ml (3.2oz) Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 4"W x 6"L WT: 0.65 lbs UPC: 850019168761

Read more less

PROTEC Base Coat - 100ml (3.2oz)DiTEC PROTEC Base Coat is a professional-grade two-step (when paired with Top Coat) resin coating for boats and cars. Base Coat serves as a layer for the Top Coat to adhere to. PROTEC Base and Top Coat offers flexibility that isn’t found in other coatings; it won’t crack and flexes with your paint or gelcoat. Its unique, cutting-edge formula delivers strong protection, long-lasting shine, and excellent hydrophobic performance. Cuts cleaning time by up to 50%. Perfect for marine and automotive surfaces of any size. (Base Coat needs to be used in conjunction with Top Coat).Performance/Protection: Provides 12-24 months of protection on paint/gelcoat, depending on climate and environmental conditions. The time frame between recoating can be supplemented with the use of PROTEC Shampoo (every 30 days) or PROTEC Quick Coating (every 90 days), depending on the method you choose. Creates a strong protective shield Offers top-tier protection against oxidation, UV-light, dirt, grime, exhaust build-up, and other contaminants for multiple seasons Makes maintenance much easier, reducing cleaning time by 50% Coverage: 3.2 oz (100 ml) will cover a 30-40 ft. boat. Appearance: Clear colorless Solubility: 100% in water pH: N/A Specifications: Professional Grade Coating Base Coat Size: 100ml (3.2oz) Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 4"W x 6"L WT: 0.65 lbs UPC: 850019168778 Owner's Manual (pdf)

Read more less

UV Protectant & Conditioner - 32ozDefend your boat’s vinyl surfaces against harsh UV rays with Xanigo Marine's powerful UV Protector and Conditioner. Specially formulated to prevent sun damage and fading while the conditioner hydrates and nourishes your seats to extend the life of your vinyl. Safe for use on all colors, it leaves no oily residue and helps maintain a clean, like-new appearance.Designed to work seamlessly with the Xanigo Marine Mold & Mildew Prevention System, this product is the perfect addition to your full-coverage protection routine. To achieve the best results overall, use the full Xanigo System, which includes stain remover, waterless wash, mold and mildew preventer, quick wash, and UV protector. All of these are designed not to break the mold and mildew preventer’s bond for the longest-lasting prevention possible.We say it all the time, “your results are dependent on how well you follow the protocol.” We designed our chemistry and protocol to work together, and the results will speak for themselves. Welcome to the Xanigo Marine family!Features: Protects from Fading Hydrates Textiles to Extend Life Safe on all Colors and No Oily Residue The UV Protector is specially formulated to be used as a key step in the Xanigo Marine Mold & Mildew Prevention System.Each product in the system is designed and tested to work together, delivering long-lasting protection and keeping your boat’s interior looking its best for years to come..Directions for Use:1. Start with clean, dry vinyl surfaces.2. Spray UV Protector evenly onto the area.3. Gently wipe with a microfiber cloth.4. Let dry — no rinsing needed.For best results: Apply every 90 days after using Xanigo Marine Mold & Mildew Preventer. Specifications: Type: Vinyl & Rubber Box Dimensions: 3"H x 3"W x 10"L WT: 2.25 lbs UPC: 860012752522 Brochure (pdf)

Read more less

Quick Wash - 32ozStreak Free - Clean Rinse - Fresh Scent! The Quick Wash provides solid cleaning power and a long-lasting, tropical fragrance that will deodorize and leave your boat smelling fresh and clean for hours. Simply dilute the professional concentrate to achieve the necessary cleaning power and be amazed at the speed and ease with which it does the job. The Quick Wash rinses clean, leaves no streaks, and controls odors.Xanigo Marine professional streak-free Quick Wash is an integral part of keeping your boat clean, fresh, and mold and mildew-free. Designed as a part of the Xanigo Marine Mold and Mildew Prevention System, the Quick Wash ensures that once your boat is protected with Xanigo Marine Mold and Mildew Preventer, it remains protected for as long as possible. To achieve the best results overall, use the full Xanigo System, which includes this non-ionic wash, which does not break the mold and mildew preventer's bond.We say it all the time, "your results are dependent on how well you follow the protocol:' We designed our chemistry and protocol to work together, and the results will speak for themselves. Welcome to the Xanigo Marine family.Features: VOC Free and pH Neutral Controls odors with a fresh, tropical scent Keeps mold & mildew preventer active Directions for Use:  Quick Wash is a concentrated formula that can be used with a garden hose sprayer, pressure washer, or bucket and brush. Dilute the product based on your cleaning needs. (Do not brush surfaces that have been treated with Xanigo Marine Mold and Mildew Preventer. Wipe using a microfiber cloth. Light Duty Cleaning / Refresh: Dilute 2oz. per gallon of water Medium Duty Cleaning: Dilute 4-6oz. per gallon of water Heavy Duty Cleaning: 12-16oz per gallon of water

Read more less

X-Foamer Sprayer for Quick Wash/Dock N DeckX-Foamer: Fast, Professional Cleaning Right from Your Hose. Say goodbye to buckets, swirl marks, and time-consuming scrubbing. The Xanigo Marine X-Foamer connects directly to your garden hose and delivers thick, adjustable foam that lifts dirt and grime without touching your surface. Whether you're washing your boat, RV, car, or jet ski, this is the pro-level tool that keeps your cleaning routine fast, simple, and scratch-free.Why You’ll Love It: Quick-Connect Hose Setup – Attaches to any standard garden hose for instant, leak-free foaming power. Touchless, Scratch-Free Shine – Thick foam clings to dirt and lifts it away, helping preserve paint and vinyl. Adjustable Foam Control – Choose your mix level with the built-in dial—perfect for light rinses or heavy grime. All-in-One Versatility – Built for boats, but ready for RVs, cars, ATVs, and more. Pairs perfectly with Xanigo’s Quick Wash – For a streak-free, fresh-smelling clean every time. Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 6"W x 9"L WT: 1.1 lbs UPC: 860012752539 Brochure (pdf)

Read more less

Biodegradable Corrosion Inhibitor - 16ozProtect your boat’s metal components with Xanigo Marine Corrosion Inhibitor. This high-performing, bio-based solution is specially formulated to safeguard marine metals in corrosive environments, ensuring your boat stays in top condition. Ideal for use on anchors, shackles, chains, fasteners, engine rooms, trailer components, lugs and wheels, and more.Features: Bio-Based Formula: Made with bio-based content, safer than petroleum-based alternatives, and environmentally friendly. Saltwater Tested and Approved: Proven to protect metals in harsh marine environments, including saltwater and high humidity. Wide Application: Suitable for various metal components such as anchors, shackles, chains, fasteners, engine rooms, trailer components, lugs, and wheels, and inside the hulls of jet skis. Easy to Use: Comes in a convenient spray bottle for easy application and reapplication to ensure continuous protection. Made in the USA: Proudly manufactured in the USA, adhering to high-quality standards.Directions:1. Using the spray bottle, thoroughly coat the metal surface you want to protect from corrosion. 2. Ensure the metal is completely covered with the inhibitor.3. Reapply regularly, especially when using your boat frequently or in saltwater environments, to maintain protection and keep corrosion at bay. Specifications: Type: Metal Box Dimensions: 3"H x 3"W x 8"L WT: 0.95 lbs UPC: 198168420270

Read more less

EVO Lite Teal with Flex Suspension No PlinthLightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Build your own suspension seat for your boat from A Shark FLEX suspension unit. You can select your seat type, choose from a range of base options, and add accessories to suit your requirements.Specifications: Total weight: 8kg/17.6lbs Suspension travel: 150mm/6" Weight capacity: 100kg/220lbs Specifications of the FLEX suspension unit: Simplicity: has only 3 unique parts Compatible with most third-party seats and attachments (including swivels) as well as Shark seats 225mm of progressive and ULTRA-SMOOTH travel Light: Only 9kg (20lb) 450mm overall height Compact: 300mm wide, 350mm deep Less fatigue: From 3-axis shock mitigation eliminates whiplash and takes stress off your body Non-corroding: soft-edged and non-marking, built with 316 stainless and Flexanite Super low maintenance Tested: 1 Million full 10g impacts Crash test rating: To HSC2000 Annex 10 requirements 3-year global manufacturer's warranty on all parts Independent tests reveal that Flex outperformed a well-known European brand Easy one-man installation Easily repairable: the shock can be replaced in under 2 minutes by one person Suspension can be bolted directly to your deck with 8 bolts (minimum)

Read more less

EVO Teal with Flex Suspension No PlinthLightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.Affordable, comfortable, & safe suspension seats for boatsAt Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.Simplicity & Quality meet Hi-techThe simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.Peak Performance, Independently TestedRegular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.Comfortable & AttractiveShark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.SafeShark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.Build your own suspension seat for your boat from A Shark FLEX suspension unit. You can select your seat type, choose from a range of base options, and add accessories to suit your requirements.Specifications: Total weight: 18.5kg/40.8lbs Suspension travel: 225mm/9" Weight capacity: 120kg/265lbs Specifications of the FLEX suspension unit: Simplicity: has only 3 unique parts Compatible with most third-party seats and attachments (including swivels) as well as Shark seats 225mm of progressive and ULTRA-SMOOTH travel Light: Only 9kg (20lb) 450mm overall height Compact: 300mm wide, 350mm deep Less fatigue: From 3-axis shock mitigation eliminates whiplash and takes stress off your body Non-corroding: soft-edged and non-marking, built with 316 stainless and Flexanite Super low maintenance Tested: 1 Million full 10g impacts Crash test rating: To HSC2000 Annex 10 requirements 3-year global manufacturer's warranty on all parts Independent tests reveal that Flex outperformed a well-known European brand Easy one-man installation Easily repairable: the shock can be replaced in under 2 minutes by one person Suspension can be bolted directly to your deck with 8 bolts (minimum)

Read more less

Shur-Lok MOPS & BROOMSDeluxe "Water Sprite" Mopis our top of the line mop to be used when nothing but the best will do! Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 4"W x 17"L WT: 0.5 lbs UPC: 703485501177

Read more less

Shur-Lok Boating & FishingBoat Hookan exclusive 3 in 1 Shurhold design with a line carrying feature, centered push-off, and basic boat hook. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 5"W x 11"L WT: 0.25 lbs UPC: 703485501306

Read more less

Shur-Lok BrushesDeck brushes flared bristles and angled head design6" Soft Brushw/ yellow polystyrene bristles Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 6"W x 10"L WT: 1.05 lbs UPC: 703485209608

Read more less

SHUR-LOK HANDLES"One Handle Does It All"60" Fixed Length HandleShurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories. The SHUR-LOK design guarantees that Shurhold attachments will never spin or pop off during use. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 60"L WT: 0.9 lbs UPC: 703485407608

Read more less

Mercruiser Bravo 1 Bearing CavityPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Note: Aluminum anodes are supplied as standard with Mercury and Mercruiser drives. Use of zinc anodes will invalidate the warranty.Specifications: Replaces: Mercury # 806188Q 1 Used on Mercruiser Bravo 1 outdrives Weight: 0.16 lbs (0.07 Kg) Standard Pack: 40 Kit Includes: Mounting hardware Installation instructions

Read more less

2-3/8" Thread-Lock™ Fixed-Height Post - 13"Sturdy 2-3/8″ high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with Trac-Lock™ non-locking seat mount (sold separately).

Read more less

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swivel. Adds structural support to rotational molded seats and other plastic seat bottoms.

Read more less

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-height post (sold separately). Can be used with Thread-Lock™ table and grill posts (sold separately).

Read more less

KingPin™ Standard Square Steel Base with Brass - 7"x7"Standard square stainless steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

Read more less

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

Read more less

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

Read more less

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

Read more less

2-3/8" Plug-In™ Locking 3-Piece Pedestal Package - 12"Locking 3-piece package includes locking Trac-Lock™ swivel seat mount, Plug-In™ Hi-Lo fixed height post with anodized finish, and Plug-In™ 9″ diameter base with satin finish.

Read more less

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels 6″ fore and aft. Flip handle for locking pin.

Read more less