Elite Lock - Single - Power-Pole PV - BlackYour Power-Pole Shallow Water Anchor keeps you locked in place—now lock it securely to your boat with the Elite Lock from Secure Outdoors!The Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Single - Minn Kota QRB - SilverYour Minn Kota Anchor is a valuable investment—protect it effortlessly with the quick and easy installation of the Elite Lock from Secure Outdoors!The Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

12V 1-1/4" Stroke 5 Lobe Actuator - 5/16" - 3/8"Lenco's 12V actuator for ski boats and tow boats. Includes: Deutsch connector 6' cable and mounting hardware 3/8" hole 12V  1.25" Stroke  XDS Series Replacement Actuator for Tow/Ski Boats WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12" x 12" Standard Mount Trim Tab Kit without Switch Kit- 12VLenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Kit Contents: 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 17' to 30' Length of Tab: 12" Width of Tab: 12" Hinge Height: 2" Minimum Transom Height: 14" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Mildew Remover - 16ozMildew ruins a boating experience, and it can your boat. Give your investment the protection it deserves with superior BoatLIFE® Mildew Remover, the industry standard. Its chlorine-free, acid-free form removes mildew safely and easily. Unlike complicated, multi-step mildew cleaners, BoatLIFE Mildew Remover features a 1-part system and even controls odor. Use BoatLIFE boat mildew remover safely on fabrics, too. There's no other marine mildew remover as proven or reliable.Features: Chlorine-free Acid-free Works safely and easily 1-part system Controls odor Safe for fabrics Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 4"W x 10"L WT: 1.15 lbs UPC: 020537011379

Read more less

Elite Lock - Dual - Universal - BlackThe Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Single - Universal - BlackThe Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Single - Universal - SilverThe Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Elite Lock - Dual - Universal - SilverThe Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Microfiber Pad Base CoverTransform the Shurhold Handle into an extendible microfiber scrubbing pad! This pad has all the same benefits as a high-quality microfiber towel. Lifting and trapping dirt easily, it's perfect for cleaning any high-up windows, isinglass, or other sensitive surfaces.Features:Fits Shurhold's Swivel Pad BaseApplications:Perfect for cleaning any high-up windows, isinglass, or other sensitive surfaces

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 9 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 9" (23 x 23 cm) Boat Length - 14' to 19' (4 to 6 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 15.45 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 18 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 18" (23 x 46 cm) Boat Length - 21' to 30' (6.5 to 9 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 22.15 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 9 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm) Boat Length - 18' to 29' (5.5 to 8.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 17.05 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 12 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 17.25 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 18 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm) Boat Length - 20' to 40' (6 to 12 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 27.05 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 9 x 12The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 14.15 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 9 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm) Boat Length - 18' to 29' (5.5 to 8.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 14.35 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

Automatic Leveling Control - Single Actuator As wind shifts, water conditions change or passengers move about, the Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride.The ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Microprocessor based automatic leveling trim tab control with LED tab position indicators  Controls roll and pitch automatically Internal GPS - no GPS antenna or network required Automatically adapts to varying sea conditions Completely sealed and waterproof (IP68) UV protected - will not deteriorate in sunlight Prevents automatic corrections while turning Designed for planing and semi displacement hulls larger than 20ft Actuators connect directly to ALC-1 display panel (no external power module box required) Automatically dims LED tab position indicators in darkness and brightens in sunlight Automatically retracts trim tabs when boat is off plane or using optional key switch connection Technical Specifications: Display Color - Black Actuators per Tab Plate - One (1) Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Mounting Hole Cutout - 2" (50 mm) Operating Voltage - 12 or 24 V *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 24 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm) Boat Length - 24' to 37' (7 to 11 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 2"H x 4"W x 6"L WT: 27.45 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

SkegGuard® 27091 Stainless Steel Replacement Skeg Model Guide  Evinrude - 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 225-250-300 2 Stroke 2002-Present  Johnson - 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 135 25" or 30"Shaft 2000-2006 225-250-300 2 Stroke 2002-Present Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features:  Johnson 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 135 25" or 30"Shaft 2000-2006 225-250-300 2 Stroke 2002-Present  Evinrude 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 225-250-300 2 Stroke 2002-Present Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 8"W x 18"L WT: 1.9 lbs UPC: 672057270912 Brochure (pdf)

Read more less

KeelGuard® - 9' - AlmondThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Almond KeelGuard® Size: 9' Boat Size up to 24' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 9' Color: Almond Boat Length - Max (Feet): 24' Box Dimensions: 5"H x 9"W x 13"L WT: 5.55 lbs UPC: 672057203095 Brochure (pdf)

Read more less

Replacement 6" Dual Action Polisher PRO Backing PlateDesigned specifically to work with Shurhold's Dual Action Polisher PRO..6" polyurethane backing plate Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.35 lbs UPC: 703485121009

Read more less

Flybridge Kit f/Standard Key Pad f/All-In-One Integrated Tactile Switch - 10'Second station Standard Key Pad connecting to the NEW (ALL-IN-ONE) Integrated Tactile Switch Kit (part# 15169-001). Add a second station key pad to your NEW Integrated Tactile Switch by plugging into the existing harness.Kits Include Harness length 10' Second station key pad 3 Year Warranty Replacement parts are available and are sold separately. Specifications System Type:Single Actuator Compliance:CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

One Bucket Kit - 5 Gallon - WhiteStore all you cleaning supplies right in the bucket. Keeps supllies dry and organized.Includes:World's Best Bucket(5 Gallon)Soft rope handleUV resistant bucketBucket GrateKeeps brushes & mops out of dirty waterBuilt-in measuring cups for optimal soap useBucket SeatContoured, durable & softProtectsbucket contents from weatherBucket CaddyConvenient finger grips for easy removalCarries & stores cleaning suppliesDrain holes keeps supplies dry Specifications: Type: Tools & Accessories Box Dimensions: 12"H x 13"W x 16"L WT: 5.3 lbs UPC: 703485121146 Brochure (pdf)

Read more less

Flagship Premium Marine Wax16ozDramatically enriches color and shine of fiberglass and gel coat surfaces. Effective in removing light oxidation and dullness, restoring gloss, and adding protection from UV damage. *Use wax only after the surface has been cleaned and restored to a "like new" or "average" finish.Benefits Utilizes the highest grade of carnauba to protect all paint surfaces Effortless application and wipe-off in full sun Product can be safely applied with a Dual Action Polisher Long-lasting protection Product can be applied by hand High Speed Rotary Creates a brilliant high-gloss surface Prevents aging and protects surface from contaminants Brings back to like-new condition Protects against UV damage and browning Contains synthetic polymers VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 9"L WT: 1.2 lbs UPC: 070382163167

Read more less

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High PitchFeatures: High pitched 304 Stainless steel inside and out 5-year Guarantee Prewired Mounting holes have 4" centers Hardware not included 3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm) Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 2"H x 5"W x 13"L WT: 0.9 lbs UPC: 768170100516

Read more less

Shore Power AdapterReplaces the 83AStraight Adapter - Not recommended for useis wet locationsBoat Side: Female Connector - Attaches to boat inlet or cordset30A 125V LockingDock Side: Male Plug - Attaches to dockside receptacle or cordset15A 125V Straight BladeWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Straight Adapter Box Dimensions: 3"H x 4"W x 8"L WT: 0.5 lbs UPC: 093344051906

Read more less

6" Set Back Electric Jack Plate with Smart Control - Black AnodizedThe IMPULSE brand represents a fundamental shift in the way we think about Jack Plates. Purposefully designed, with features for both the modern angler and the performance junkie, the IMPULSE brand is about to make some serious waves in the Jack Plate market.IMPULSE Jack Plates are all electric which means they are cleaner, greener, and more energy-efficient than their hydraulic counterparts.  They also won't bleed down and require no messy fluids or hoses!The IMPULSE features a modular design which creates a more open area for mounting without the need for setback spacers.Unlock the true potential of your IMPULSE Jack Plate without out SMART Control Kit which adds an incredible set of features including a Smart Remote that doubles as a digital gauge! Display - The IMPLSE Smart Remote utilizes a SHARP® Memory In a Pixel LCD. Embedded, 1-bit memory in every pixel allows for an always-on display that leverages ambient light to create a high-contrast, high-resolution image in all light conditions. MEMORY BUTTONS - The Smart Remote allows the user to program up to 3 precise memory positions that can be triggered with the push of a button.  This allows you to keep your hands off your jack plate control and back on the wheel as much as possible. TRAILER BUTTON - Another industry-first: a 4th programmable button installed on the frame of the jack plate, allowing you to put your jack plate at the perfect trailering height without having to climb back in the boat. Rated for outboards up to 250HP Owner's Manual (pdf)

Read more less

Honda 5, 8, 9.9. 15 (1980-2000)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Hub Kit #701Features: Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damage WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Dress White Boxed Set - Outboard MotorsPerimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens.Packaged and ready for the display counter.  This 4 Gauge Boxed Set offers a complete set of gauges ready to install.Outboard Motors Boxed Set Includes Speedometer (55 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Factory P/N KT9794*Sold as a Box Set**Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Series: Dress White Voltage - Input Range (Volts): 12/24 V Box Set: Yes Box Dimensions: 7"H x 10"W x 21"L WT: 4.3 lbs UPC: 759266097940

Read more less

K.O. Kills Odors Bio-Active Treatment - GallonK.O. utilizes live, odor-killing bacteria that digest liquids, solid waste, and paper, totally emulsifying them so there's no need to add tissue digesters or other boosters to your system. The bacteria in K.O. neutralize the odor-causing elements in waste, effectively converting the contents of your holding tank to an odor-free product. Chemicals only mask the odor temporarily. Although they kill odor-causing bacteria, chemicals also kill other bacteria that suppress odor. Chemicals can cause the odor problems you're trying to solve! Enzymes stimulate the breakdown of waste already in the tank, but are not effective against odor, and are diluted by new waste as it is added.Features: Kills odors in marine and RV holding tanks Bio-Active Non-Toxic Non-Caustic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Life-Calk Cartridge - MahoganyA long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces. *Not compatible with all paints, Sikkens, Cetol, Deks, OljeWARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Mercruiser Bravo 3 (2004 & Later) Complete Anode Kit - AluminumComplete kit of anodes and hardware for Mercruiser Bravo 3 (2004 and later) outdrive.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Replaces:Mercury Kit # 888761Q04Includes: 00046A Qty 1 (821630) 00047A Qty 2 (806190) 00049A Qty 1 (762145) 00163A Qty 1 (865182) 00268A Qty 1 (76214 4) Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.9 lbs UPC: 870648001659

Read more less

Mercury 15, 20 Remote Shift/Throttle & Tiller (2011-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF CylinderFeaturing the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine, the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the composite UP20 helm, the Hyco offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stoke outboards engines.Kit Contains: UP20 FM Helm UC95-OBF cylinder OIL 15 - 2 Quarts

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 11 Feet Specifications: Cable Length (Feet): 11' Box Dimensions: 3"H x 18"W x 23"L WT: 6.4 lbs UPC: 702755017097

Read more less

Chesapeake White SS 4" Tachometer with Hourmeter (4000 RPM) (Diesel) Mech. Takeoff & Var. Ratio AltPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N TD9108*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer - Diesel Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Series: Chesapeake White Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266338340

Read more less

Transom Bar AnodeBar For Engines - Yamaha Material: AluminumLength: 7.99"Height: 1.97"Width: 1.77"Weight: 0.78lbs Specifications: Material: Aluminum Box Dimensions: 2"H x 3"W x 8"L WT: 0.75 lbs UPC: 8059617815660 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Automotive Leather 3-In-1 Complete Care - 16oz303 Automotive Leather 3-in-1 Complete Care cleans, conditions and provides UV protection to all finished leather and vinyl.  It will help clean up surface dirt and grime, as well as helps repel future dust, lint and stains.  Also contains superior UV protection to prevent fading and cracking of the leather caused by the sun’s harmful UV rays.   Easy to use formula, just spray on and wipe off. Features: No residue left behind Repels dust, lint & stains Conditions leather surface to prevent cracking & fading Provides UV protection for all finished automotive leather & vinyl Safe for use on all finished car leather & vinyl surfaces Made in the U.S.A. *Sold as an IndividualWARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Leather Box Dimensions: 1"H x 4"W x 11"L WT: 1.2 lbs UPC: 082043302181

Read more less

Deck Mounted Seat SlideSwivl-Eze has the boating experience to deliver all the kinds of accessories you want.Features: Seating accessories for retrofitting and improving Adapters to change a post installation or swivel location Mounts directly to the boat deck 1-5/8" total height Constructed of strong aluminum Convenient front control operation For use on stamped and welded seat mounts or cast seat mounts not originally equipped with slider

Read more less

52MM (2-1/16") OceanLink Coolant Temperature Gauge (250°F) - Black Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Voltage - Input Range (Volts): 12/24 V Gauge Size: 2-1/16" Box Set: No Series: OceanLink Box Dimensions: 4"H x 5"W x 6"L WT: 0.35 lbs UPC: 7640178721081

Read more less

Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Built of durable plastic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Material: Plastic Box Dimensions: 1"H x 7"W x 16"L WT: 1 lbs UPC: 022697137074

Read more less

Weatherproof CoverWeatherproof cover w/Easy Lock Ring - use with 6360CRN or 6364CRN (female connector)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 4"H x 4"W x 5"L WT: 0.4 lbs UPC: 093344008238

Read more less

Quick Wax®16ozThe spray wax method can quickly add protection and gloss to large surfaces typical on boats and RV's. Whether the surface is wet or dry, this specialized formulation will create a brilliant gloss while adding wax protection. Suitable for use on fiberglass, painted surfaces, stainless steel, and clear plastics. *Use wax only after surface has been cleaned & restored to a "like new" or "average" finish.Benefits Utilizes the highest grade of carnauba to protect all paint surfaces Effortless application and wipe-off in full sun Long-lasting protection Product can be applied by hand Prevents aging and protects surface from contaminants Protects against UV damage and browning VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 10"L WT: 1.3 lbs UPC: 070382159160

Read more less

HPU Mounting BracketH1179Mounting Bracket for Hydraulic Power UnitWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

UP28F - Front Mount Helm PumpFeatures: Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Complete with elbow fittings 5 pistons

Read more less

Volvo Penta DPH/DPR Complete Anode Kit - AluminumUsed on Volvo Penta DPH and DPR outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Includes: 00218A Qty 1 (3588748) 00219A Qty 1 (3588745) Kit includes mounting hardware and installation instructions. Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.45 lbs UPC: 870648003042

Read more less